Tried to upgrade the ROM on an M1000 to 2003 SE from a 1.600 version and wound up with the following symptoms.
Only able to see the bootloader (v1.06, but computer recognises the device when in the USB cradle)
HimaUpgradeUT will run as far as the screen saying what ROM it's replacing (though it says that there is nothing on the device itself). Then when I press "next" it just hangs on the erasing ROM 0% screen until I get an Error 112.
Tried using two different computers and still get the same error.
Tried different HimaUpgradeUTs and still get the same error.
Tried hard resets, soft resets, reinstalling ActiveSync, disabling ActiveSync etc.
Going insane and need suggestions. Help!
I think your best bet is to revert to the original ROM. I thought it was on this forum, but I just looked and can't find it, but...
http://www2.orange.co.uk/servlet/Sa...096364420640&product=Feature&t=Product#answer
Should get you to the ROM download page on ORANGE UK, where you have a choice of with and without MMS ROM images.
If you can get your 'phone back - that might be a start.
Richard
Edit - just tried the link and it isn't that good. Go to 'Your phones features'.
Sadly I've already tried that. But it won't accept anything. Thanks for the suggestion though.
I at a loss as to what exactly the problem is. I've checked the log file from the HimaUpdateUT file and it keeps trying to erase the original ROM but can't. Which is weird because there doesn't seem to be anything on the device. I wish there was better logging by the program.
I'm starting to consider exploring Bootloader commands to see what I can find.
did you put your device in BOOTLOADER MODE?
PROCEDURE: PRESS ON/OFF POWER BUTTON-SOFTRESET BUTTON-NAV PAD
Yep. In fact I can't get it out of bootloader mode. Have hard reset it several times.
Hi,
do you have SD card???
buzz
Ironically I just ordered one before I fried the device. I guess using it to transfer the ROM image is a possibility. It looks difficult though.
Hi,
yes - I've read ALL the dead tytn posts and followed all Wiki options but not describe my situation.
I was having a perfectly stable Tytn for the past few weeks, didn't install anything, used it daily with no issues.
Yesterday I decided to reboot to clean the mem a bit (God knows why) and after the restart it simply came on with a blank screen.
The screen shows nothing and the backlight turns on but nothing.
I tried to put it in flash mode and yet the screen remains blank - nothing.
Took the battery out for an hour back in - dead screen.
Did a hard reset - still dead screen.
Tried a sd flash method - still nothing showed.
I even took it apart to check the cables - all in place nothing shows damage or issues or even dirt.
It doesn't show a thing no matter what I try,
ActiveSync is not connecting and all rom flashers fail to connect (error 260).
Tried mtty but didn't get the usb> prompt (just cmd>)
The wierd part is that it still recieves calls from time to time.
Did anyone face this or know of any solutions?
PLEASE HELP! This is so sad...
giliav said:
Hi,
yes - I've read ALL the dead tytn posts and followed all Wiki options but not describe my situation.
I was having a perfectly stable Tytn for the past few weeks, didn't install anything, used it daily with no issues.
Yesterday I decided to reboot to clean the mem a bit (God knows why) and after the restart it simply came on with a blank screen.
The screen shows nothing and the backlight turns on but nothing.
I tried to put it in flash mode and yet the screen remains blank - nothing.
Took the battery out for an hour back in - dead screen.
Did a hard reset - still dead screen.
Tried a sd flash method - still nothing showed.
I even took it apart to check the cables - all in place nothing shows damage or issues or even dirt.
It doesn't show a thing no matter what I try,
ActiveSync is not connecting and all rom flashers fail to connect (error 260).
Tried mtty but didn't get the usb> prompt (just cmd>)
The wierd part is that it still recieves calls from time to time.
Did anyone face this or know of any solutions?
PLEASE HELP! This is so sad...
Click to expand...
Click to collapse
the cmd> prompt means its in bootloader.
question is... have you put Hard-SPL on this device.
Hi,
Thanks for replying.
Yes I did - I've put your outstanding hard-spl 2.10 (http://forum.xda-developers.com/showthread.php?t=296722) on it and it worked great.
Can I use the CMD to somehow re-flash or do something else?
You think it's software related?
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset
Hello,
I have a problems with my tg01. I will start from the begining. I tried to change ROM in my phone and something goes wrong. When I turn it on after operation, black screen show up on my phone. I tried to repair it with, I done everyting as state on the post "Bricked TG's problem solved - Instruction how to unBRICK". I even tried pins method and nothing. Still black screen. Did anyone have any ideas, how I can repeir it other way? Please for any help.
Thank you
me too i just bricked my tg01
i've tryed tg downloader common download and QPST without sucess dim display no download mode
Riff Box or warranty claim, no othe way if other unbrick methods do not work.
Flash EFS2 too from wp7->wm6 procedure, this may help
Hello everyone.
I ran into a serious mishap with my brand new work phone. I was handed a HTC radar c110 with Windows phone 7.5 to work with, but the phone had a little issue with calls and I decided to do a factory reset to see if it would sort it out.
So I searched on how to do a factory reset, and took a quick run to the bathroom before I could complete it. But my friend decided to finish it off for me, and somehow mispressed some button I guess, because a screen saying "Omega system loader menu" came up instead, with "FFU method" and 2 options, "MTPz" and "TFTP protocol". She took a blind guess at TFTP protocol, and when I came back the phone wouldn't turn on, it keeps resetting every few seconds and only says "TFTP protocol" on the bottom of the screen. Sometimes an image asking to connect the phone to the pc comes up.
I have tried the factory reset after this a couple of times, but when the phone restarts, this TFTP protocol image still comes up and the phone won't start. My guess is I have effed up the OS. What do I do now? Any guess? I don't want to go to my new job on monday and say that I screwed up the phone they gave me yesterday :S.
Any help is very appreciated. Thank you very much.
EDIT: I can get to USB host mode screen (white screen with "enter usb host mode"), and the white screen where you can "image crc" and "factory reset", not sure if it's called bootloader screen? I'm pretty sure I can get somewhere from one of these screens, but I'm not familiar with rom flashing and bootloaders at all.
EDIT2: I have been investigating further and I can now access the bootloader mode (the factory reset one), update mode (the omega system loader one) and usb host mode. I just need to figure out how to flash a rom (preferably an official one, as it's a company phone) into it now.
EDIT3: I got it fixed, not really sure how, but trying different things ended up booting the phone as normal. I am back to having the same problem as before though, but better than having a bricked phone I guess.
any idea what the solution ended up being?
I think reverting back to my original stock rom might be the answer for me, how did you do it?
I've just managed to do the same..
Any help as to how to sort out this issue? TFTP Protocol appears at the bottom of the screen with all the other symptoms referred above.. PLEASE SOMEONE HELP.