Hello, I am in serious trouble! I got a brand new HTC Athena with Windows Mobile 5.0. I succesfully upgrade it to Windows Mobile 6.0.
All was OK.
Than I was interested to move into Windows Mobile 6.1 and possibly 6.5. At first I did the Athena unlock (3 step process) and all went OK: Antenna 1.5.0, SPL 1.2 OLI....
THAN I DID MY ERROR! I try to upgrade my 6.0 ROM with the Micky 6.1 cooked file with SPL 3.5. After a 92 percent upgrade, the ROM crashed and now I always get a nasty black screen with few lines (No 3 color bands!). When I try to upgrade again the same ROM or ROM for SPL 1.2 I get an error (ID mismatching). I guess the only solution is a hard and full reset of the Windows. But doing only a hard reset with the PDA will NOT change my error message and I will keep see this nasty black screen and I cannot load the Windows ActiveSync application-
I am totally lost. Help please. Any tool for a true full restore/recover??? (I did NOT make any backup!).
This thread might hold a solution to your problem.
Hi
If you follow the instructions exactly in post 33, it will solve your problems. just click HERE
Jay
Hello, those links are basically for corrupted wifi antenna files.-
In my case my HTC Athena crashed the Windows 6 ROM while I was attempting to upgrade, after unlocking the phone, the Athena from version 6.0 to version 6.1
Are you sure I can use the post #33 also for my specific trouble?
Thank you in advance!
this is also to repair your bootloader-infos
if you look at your bootloaderscreen, you will see ATHE100, IPL, ATHE100, SPL. if not, you have to repair it
make sure you flashed the right rom, spl 1 or 3.5
How can the bootloader get repaired?
yes use that link, post #33. fixes both wifi and modelid problems and bootloader problems when you got stuck at 92% of the flashing process.
Cannot re flash ROM
Please help! I tried the unlocker and it failed at 92% and since then I have no WM6. Then I tried to flash the Michy WM6.5 and that failed. I was getting model id errors so I did the mtty and mac1 fix which was succesful. However all I can get now is a grey screen on boot-up. I can get to the bootloader screen and it displays ATHE100, IPL-v2.02, ATHE100, SPL-v1.20. Olipro. From what I have read on the forum at this stage I should run a RUU to flash a WM6 ROM but all that I try can't connect because no OS running to connect with Activesync? Is there a way to flash from the bootloader? The other option seems to be putting an image and flasher on a miniSD but I can't find clear instructions for this or which files?
Please ignore - my battery wasn't charged enough. Replaced battery and recovered device.
Still Major Problem! Help me! Have mercy!
Hello Responderman, all,
I have follow the link (thread 33)...., however, after I have typed lnbs filename.bin 75108000 (I have SPL 1.2), I got in mtty the "code entrypoint unknown" message, which should be ok......
However, after I have disconnected the usb cable of the Athena from the PC and try to reboot it, I got again the exact same, nasty, dark screen with blue strips.....:-( It means that my damaged firmware has NOT been fix and in fact I am still NOT able to boot WM successfully!
PLEASE HELP. It is 3 months with this problem and I cannot use my device.:-(
Still Major Problem! Help me! Have mercy!
Hello Responderman, all,
first, how can I get the mac address of my device? It is NOT written anywhere in the Athena parts (checked in the battery bay and so on.....), and so when I run mtty i am in trouble! I have used a mac address got from my company's manager, but not sure it is ok to use it with the Athena!
Anyway,......I have follow the post link (thread 33)...., and followed the various steps.- However, after I have typed lnbs filename.bin 75108000 (I have SPL 1.2), I got in mtty the "code entrypoint unknown" message, which should be ok......
However, after I have disconnected the usb cable of the Athena from the PC and try to reboot it, I got again the exact same, nasty, dark screen with blue strips.....:-( It means that my damaged firmware has NOT been fix and in fact I am still NOT able to boot WM successfully!
PLEASE HELP. It is 3 months with this problem and I cannot use my device.:-(
Solved!
Hi, problem done. I have follow the remarks, fixed my broken firmware and now I use well Athena with VM 6.5! Thanks all for your help!
puffo said:
Hi, problem done. I have follow the remarks, fixed my broken firmware and now I use well Athena with VM 6.5! Thanks all for your help!
Click to expand...
Click to collapse
Can you tell what you've actually done after you've changed ROM with Mtty?
I done the thing with Mtty but just as you described when I reset it now I still get the grey screen. And if I try to update ROM it fails again on 92%
where did you find the upgrade from wm5 to wm6?
the link I found on rapidshare seems not be availabel anymore
Related
I was trying to upgrade to radio v1.43 in the hope that battery life was improved over 1.41 however when it got to 8% it stopped and gave me an error i can't remember After atempting to recover, it got off the three colour screen now the 3100 stalls on the blackshadow version4 screen (bootloader screen?) and goes no further. I tried reflashing but got a 260 and using mtty, only getting 2 com port options, didn't offer any help.
I'm really sorry to have not been able to sort this with reading through the relevant post but I haven't found a solution. What else can I try?
Hi,
Could you pls advise what is your device made, model, SPL version ... etc.
Also did you try to do Hard reset?
I'm using now black MAJIK (and few days ago black shadow) with radio 1.43 with no problem.
its the SPV m3100 When I decided to go Black shadow I read up on mr vanx and made sure I had all the things I needed. If I remember right, when I came to upgrade to Majik the auto detect found the second option down
SPL-1.04/1.10 - 1.09 Bootloader. I've realized since I had a spaz and ran the RUU from the archive this time. From what I've since read thats not too cleaver.
I have tried a hard reset and took the battery out instead of pressing space.
I dont know if this information on the starter screen is of use
M 05
S 04
B 05 D 3lak
I'm not sure, but hard reset doesnt mean you take the batery out.
Please check that link:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
I was in your position (hanged on booting) few days ago, and when i did hard reset, it changes every thing to basic normal condition.
i meant when i did a hard reset when it asked me to press space to reboot I took the battery out. I tried again this time pressing space to reboot but I still get stuck on the loading screen. I can't connect by USB to the PC I'm guessing the drivers on the phone haven't loaded and I'm stuck as to what to do.
Does anyone have any ideas?
try look at it http://forum.xda-developers.com/showthread.php?t=286755
ok I've tried everything I can think of to connect the 3100 to the computer so I can reflash it but mtty gives only com 1 and com2 but no USB and neither those two work, active sync wont connect so I disabled it as suggested and running the radio ruu and wrapper wont querry the device. I am now at a loss as to what to do next someone must know what I should do. Please?
what is your SPL?
try this http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
sl is 1.09 i'd updated it on the previously successful black shadow flash
msn [email protected]
icq 150277111
AIM TazmanFH9
Yahoo bigfathairyboggart
I have tried changing KITL trasport but I am unable to select or chose either option. I have also tried the rversion command in the tri colour screen but nothing happens. I hope I'm missing something nice and simple but I get the feeling I'm not going to be that lucky. Please help
tcSPVm3100 said:
sl is 1.09 i'd updated it on the previously successful black shadow flash
Click to expand...
Click to collapse
I suggest you check again, press and hold the side OK button and the power button...then put the stylus into the hole in the bottom of the unit.
yeah I've done that it's "SPL-1.09"
I had this exact problem yesterday, with the same bootloader too. The phone would not pass the splash and IT refused to upgrade. I ended up downgrading to a shipped wm5 rom (in my case the cingular 1.30.502.1_1.11.00.00) which to my surprise actually worked as no rom radio or spl upgrade moved at al on my phone. Then upgraded back to black majik. I hope this helps.
Thanks. I downloaded the trial of wm5 from the windows website and it asked me to install .NET framework version 1 so I got that but it turns out to be 2.0 not 1.1 It would say it had repaired but it would say this with or without the phone connected.
tcSPVm3100 said:
Thanks. I downloaded the trial of wm5 from the windows website and it asked me to install .NET framework version 1 so I got that but it turns out to be 2.0 not 1.1 It would say it had repaired but it would say this with or without the phone connected.
Click to expand...
Click to collapse
Just download a WM5 ROM from the wiki page!
ok tried this too no luck.
Trying to use the one from orange (linked to through wikki) I get an 294 invalid vendor error however active sync cannot connect yet of course so is this to be expected?
I have however gotten a connection with mtty which is a step forward dunno what to do with it yet though except trying the password 0000000000000000 command but it not disabling the password. This then lead me to read for a further hour how to change it and I've got to be honest; it beat me. I have No idea what the hell its talking about. My head hurt with so much reading.
I get a no gsm pop up v briefly on loader. I so want my phone back
I have since tried CID unlocker just so i get something installed onto this brick but I either get a connection error or it telling me it can't install for some other reason. I can not set the password in mtty to 0000000000000000 so how do I do that and is this the first step to getting things sorted? "just running a rom install" is not happening I can get a USB connection in mtty and that is it. Is the fact i'm running SPL 1.09 a problem? I'm getting precious little help guys If i'm posting in the wrong place or something please let me know. I need thing thing back now. Hours are drifting by with me trying to get some head knowledge but I still need some guidance please
tcSPVm3100 said:
I have since tried CID unlocker just so i get something installed onto this brick but I either get a connection error or it telling me it can't install for some other reason. I can not set the password in mtty to 0000000000000000 so how do I do that and is this the first step to getting things sorted? "just running a rom install" is not happening I can get a USB connection in mtty and that is it. Is the fact i'm running SPL 1.09 a problem? I'm getting precious little help guys If i'm posting in the wrong place or something please let me know. I need thing thing back now. Hours are drifting by with me trying to get some head knowledge but I still need some guidance please
Click to expand...
Click to collapse
can u flashing HARD V7?,i think better u have IPL 1.04 SPL 2.10olipro first ,then try to flashing radio?
and did u try SD card.
In bootloader can anyone here connect with active sync? I can't so updating rom and radio flashes in the usual way isn't possible. Trying the hard spl again it tells me to make sure active sync is connected and as it isn't it throws back a 262 update error. 0% on the hermes and that's currently as far as I can get. I have no means with which to access the memory card.
The reason you get an invalid vendor ID is because your CID doesnt match....download a ROM which is for your device (an orange one?)...then try.
You need to read the wiki alot more before trying anything else since you are not aware of the vendor ID error...nor the fact you MUST use HardSPL.
I linked to the orange ROM from wikki and tried installing it. it was while installing THIS ROM SPV_M3100_ROMUpdate_0407.exe I got invalid vendor error.
Installing a recent DL on HARD spl v7 I get a 240 open file error that's one I haven't had before.
With all other attempts they all say they want an active sync connection.
I can not connect to the phone through active sync
so all attempts by me to flash anything to the phone using an RUU fails.
Hi All
Been dying to upgrade my Advantage 7501 and try out some of the new ROMS and the new radio on here. Went to the sticky and spent a day browsing the forums to see what I could pick up, even went to how not to brick your device thread. However I am still having issues
First thing I did was remove the SIM and SD cards, I had just reset the device yesterday so I did not reset again. I got a hold of the AthenaWrapper program and it worked as advertised. Getting into bootloader I have:
Athe100
IPL-v2.02
Athe100
SPL-v1.20.Olipro
However, this is where I run into issues. A soft reset does nothing but give me a black screen. I can get into the hard reset screen okay but when I cancel out I get back to the black screen.
Device also does not sync up with Activesync or WMDC?
Not sure what to try next or how to get back on track
Have tried on both Vista and XP.
Anyone have any suggestions
JP
Try to flash a ROM now, starting in bootloader mode. Hold the volume slider to down and then press into the reset hole.
Chooose one (SPL 1.2) from the sticky topic in the athena WM6 section
Progress
Thanks for the reply
Went back and remembered I had to flash the radio first. So I got the 1.57 update and that went as planned. One bullet dodged. Then I went ahead and grabbed some of the ROMs from the located you mentioned and that went thru as well. So it looks like I am back in business. Appreciate it.
PS I see references to SPL 1.2 and 3.5. I also read somewhere that the AP4 upgrader containts 3.5 (http://forum.xda-developers.com/showthread.php?p=2825883). Is this just a new version of the same thing?
JP
FollowUp
Just an FYI. I got things to work but not after a few more moments.... I initially tried to update to MichyPrimas 6.1 ROM and it got to 93% complete before bombing with a comm error. That was bad! Went thru the recovery wizard but it basically toasted my model id. Nothing would work. Found a copy of mtty and that did the trick. Just so other know, you need a mac address to run in the mac1.exe program. Some people report having this on the inside of their battery cover. No luck here. I did find it at the router from a connection before I started flashing. A spot of luck there. All went well and I got my model ID back and was able to resume normallly. I flashed the Black Touch PK3 ROM with WM6 for now till I have a bit more time to go to 6.1.
Anyone else have issues with MichyPrima's 6.1 ROM like I did. Looks cool and I want to try it but not if it bombs out on me and I have to mtty my way back all the time.
Cheers
jhenel said:
Just an FYI. I got things to work but not after a few more moments.... I initially tried to update to MichyPrimas 6.1 ROM and it got to 93% complete before bombing with a comm error. That was bad! Went thru the recovery wizard but it basically toasted my model id. Nothing would work. Found a copy of mtty and that did the trick. Just so other know, you need a mac address to run in the mac1.exe program. Some people report having this on the inside of their battery cover. No luck here. I did find it at the router from a connection before I started flashing. A spot of luck there. All went well and I got my model ID back and was able to resume normallly. I flashed the Black Touch PK3 ROM with WM6 for now till I have a bit more time to go to 6.1.
Anyone else have issues with MichyPrima's 6.1 ROM like I did. Looks cool and I want to try it but not if it bombs out on me and I have to mtty my way back all the time.
Cheers
Click to expand...
Click to collapse
Check the SPL version before flashing a new rom!
MIchyPrisma 6.1 Crash / Lost Unit ID / NO MTTY Upload
hello,
just read this thread after the same happens to me... ;(
jhenel wrote :
´Just an FYI. I got things to work but not after a few more moments.... I initially tried to update to MichyPrimas 6.1 ROM and it got to 93% complete before bombing with a comm error. That was bad! Went thru the recovery wizard but it basically toasted my model id. Nothing would work. Found a copy of mtty and that did the trick. Just so other know, you need a mac address to run in the mac1.exe program. Some people report having this on the inside of their battery cover. No luck here. I did find it at the router from a connection before I started flashing. A spot of luck there. All went well and I got my model ID back and was able to resume normallly. ...´
The same hits me.. break after 93%
No kind of rom can be installed, error from the romupdate utility from ´wrong unit id´ to ´can´t use this update tool , you need a newer one´ everything, but no rom will install. all hangs after 1% , stock-roms also.
i tried mtty, everything fine until task 32,level =0
then i want to upload the produced file (mac file generated through mac1.exe,spl1.x)
it starts uploading and ends with ´Fail to synchronize with the host (1)´
any ideas `?
ipl-v2.02
spl-v1.20.olipro
nothing works, only bootloader.
i can connect with mtty, but not upload files.
no rom update works..
help....
greetings,
doktor wahnsinn
http://forum.xda-developers.com/showthread.php?t=429013
you should read this first
http://forum.xda-developers.com/showthread.php?t=429013
Make an effort to search for an answer before asking a question
jhenel said:
Just an FYI. I got things to work but not after a few more moments.... I initially tried to update to MichyPrimas 6.1 ROM and it got to 93% complete before bombing with a comm error. That was bad! Went thru the recovery wizard but it basically toasted my model id. Nothing would work. Found a copy of mtty and that did the trick. Just so other know, you need a mac address to run in the mac1.exe program. Some people report having this on the inside of their battery cover. No luck here. I did find it at the router from a connection before I started flashing. A spot of luck there. All went well and I got my model ID back and was able to resume normallly. I flashed the Black Touch PK3 ROM with WM6 for now till I have a bit more time to go to 6.1.
Anyone else have issues with MichyPrima's 6.1 ROM like I did. Looks cool and I want to try it but not if it bombs out on me and I have to mtty my way back all the time.
Cheers
Click to expand...
Click to collapse
please people, READ!!!! someone above your post just told you to flash 1.2 rom, in BIG RED LETTERS.
the AP4 is what upgrades you to SPL 3.5, then you won't have a problem with 3.5 roms
(btw good thing this reminds me to release a separate 3.5 SPL upgrader)
doktor.wahnsinn said:
hello,
i tried mtty, everything fine until task 32,level =0
then i want to upload the produced file (mac file generated through mac1.exe,spl1.x)
it starts uploading and ends with ´Fail to synchronize with the host (1)´
any ideas `?
ipl-v2.02
spl-v1.20.olipro
nothing works, only bootloader.
i can connect with mtty, but not upload files.
no rom update works..
help....
greetings,
doktor wahnsinn
Click to expand...
Click to collapse
please read my really detailed instructions a bit more carefully. I could bet you skipped the part about trying to copy all the files and mtty to C:\ or the step saying click OK for the small popup in mtty. or the warning that you need to type full filename includign the .bin file extension.
also i hope you use the version of mtty i posted
if that's not it, you can also try a different PC
Help please!
I have an T-Mobile Ameo (also known Athena X7500) and i tried the Olipro Unlocker, but the installation didnt finish, at 59% stopped. After that i turn off the device, then turn on, but my device still have a 4 colour screen,red, green, blue and white, it doesnt boot the Windows Mobile, just have the installation screen...
please help
Use olipro's tool again and then flash your final ROM
i tried it many times, but since than my Athena X7500 was dead, the Olipros unlocker doesnt work. The program said: "The Update Utility cannot connect your PDA phone"
In bootloader (coloured screen), does it say anything? if so what? when you try to flash a rom or use unlocker do you get a code? is your memory card out of the slot?
I took a photo my bootloader (coloured) screen:
http://kepfeltoltes.pirateclub.hu/pics/20090106317.jpg My device doesnt say anything.
When i used the unlocker, i didnt got any code. And my memory card was in the slot.
I also took a photo what the Olipro's said now, if i try to continous the flashing:
http://kepfeltoltes.pirateclub.hu/pics/20090106319.jpg
Have you tried flashing your carrier's original Rom?
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Thanks a lot, my athena is live again, i flash my original rom!!!
But the Olipros Unlockert isnt working, the installation go to 100%, the program said that the flashing is succesfull, but my SPL is still 1.1, and i cant flash any roms..
I can understand why. Any ideas?
The other thread was closed, you shouldn't double post.
Read the links I mentioned.
as in olis first post
"Please note: you must have .net Framework 2.0 installed with the services packs, if you don't it then it probably won't run till you download it.
SPECIAL INFO ABOUT STEP 2: When you run this step, first your device will be flashed; this is NOT the end of Step 2, you must then configure your device and set it up fully so you can access the menus etc (there will be a prompt to ask you to do this after the flash anyway). then you will be able to continue. please make sure to read ALL dialogs fully"
leave out the sim and sd card.
Some others have reported better luck with the shipped WM6 rom if they had trouble unlocking.
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
VorosAdam said:
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
Click to expand...
Click to collapse
the net framework should be on your computer.
what OS is on your computer ?
May be better if you use winXP
did you install an oficial wm6 rom ?
Read the later pages in the unlocker thread
My computer also have the NET Framework 2.0 SP2. And when the flashing didn't work, i also installed the NET Framework 3.5 SP1, but, when i flashing a ROM in my decive, it also went to 100%, but the SPL is still 1.1.
I use a 32-bit Windows XP in my computer.
My T-Mobile Ameo (Athena) is a second hand device, it was used when i bought. But the first user said me, that the original OS was the Windows Mobile 5 in my Athena, but he update from Windows Mobile 5 to Windows Mobile 6.0. He said that he update with an official T-Mobile way.
Ok all good so far
Did you use the unlocker from this thread?
http://forum.xda-developers.com/showthread.php?t=315831
The other thought i had was that you should try a different computer and usb cable
oh, thank you so mutch, i tried an another computer, and it flashed the SPL from 1.1 to 1.2!
thanks again
my htc advantaage x7500
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
sheizi said:
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
Click to expand...
Click to collapse
I saw someone with the same problem as you here awhile back and he was able to fix it. So keep your post alive or read the sticky post under the Upgrade section. I believe that was where I read it.
dead X7500
Hey Im also a sufferer of a dead X7500......this all happened wen I was trying to flash my ROM which was using a SPL !.20 OLIPRO
wen I try to re flash the device , it starts a stops at 1% and follows an error msg !
plzzzzzzzzzzzz help me out to solve this prob !
regards!
VorosAdam said:
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Click to expand...
Click to collapse
I have the same problem would be kind and tell me how you solved the problem.
[email protected]
Hi all
Rather than hijacking other threads I thought it might be of help to others if I start a new one.
Having spent hours trawling thru the other threads I have now concluded that I need the help of one of the wise sages such as Cmonex or Olipro.
I decided that a thread might benefit others rather than just pm'ing them.
Ages ago i bricked my ameo.
I had upgraded to spl 3.5 and had been playing with one of michy's roms. Whilst the rom worked fine the boot-up splash screen had become corrupted, I also noticed that the camera had stopped working/initialising.
In an attempt to get the camera back I tried various other roms and decided to downgrade to spl1.2 so that I could go back to a stock rom. In a moment of stupidity I accidentally tried to reflash using a spl3.5 rom.
This resulted in a invalid model id message.
In desperation I did the old vol key down and reset pin. Told the ameo to restore.
From that point onwards the unit is no longer recognised by my pc, in the tricolour boot screen it initialises and says loading 0058002 and then displays
IPL-v1.00
SPL-v1.20 Olipro
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Pdajoy kindly suggested using a mini sd card to flash the unit. I purchased a micro sd with a mini adapter. Formatted the card to fat32, renamed the ndc file booted to the tri colour boot screen and hit reset. All that happens is that is tries to boot the old fecked o/s and gets as far as a blank grey screen and no further.
I really do miss my ameo- the screen on my touch pro is just too small!!!
Any help will be greatly appreciated.
Thanks
Hope is a typo error here, should be
"rename the RUU_signed.nbh to ATHEIMG.nbh"
Did you removed your SIM card before applying?
Sorry my bad for not warning you in advance.
Grey screen, you mean no text at all. Total blank grey?
Am just curious.
hi Pdajoy
I had renamed the files ATHEIMG.nbh, the reference in my post above is a typo. There was no sim in the phone either.
The screen after it tries to load the old corrupt rom is just a grey mass- nothing else, no text or images.
The two pics listed show the ameo booting and then the grey screen.
http://imaginarynumber.co.uk/ameo/IMAG0033.jpg
http://imaginarynumber.co.uk/ameo/IMAG0034.jpg
hi imaginarynumber,
Thanks for the photo.
hey 4.00 on screen, I believe your set is still spl 3.5
If it is my set, I will definitely flash AP4 again.
Best wait a little while for kind sage to drop by with to assist you.
Don't wish to see you bricks yours.
I have the same problem what can we do ?
I found a way to bring back the normal bootloader you just have tu press the reset button then you press the camera button and you will have your bootloader again
IT IS NOT WORKING you get back to the original bootloader but when you want to put back a rom even the official one after 1 percent it gets back to the grey screen PLEASE HELP
Srry athena works again place the mmty tool with mac bin file in the root of c and try again dont forget the task 32 command before the bin command that worked for me
I had the same exact problem (even the screen was the same) and didn't realize that the initial screen that shows up isn't the bootloader. fixed it by waiting for the grey/white screen, holding the volume button down then reset button and camera button + reset which brought me to the actual bootloader. From there I installed the latest AP rom, updated my radio and installed mitchy's 6.1
Big problem: Mac Address? Still getting dark screen and blue stripes!
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
You need to flash a rom
puffo said:
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
Click to expand...
Click to collapse
It looks like you did the wifi fixx correctly but the rom is still corrupted
Go into bootloader to confirm your SPL and then flash an spl appropriate rom
cheers
So, how to proceed now?
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
puffo said:
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
Click to expand...
Click to collapse
You have confirmed that you have spl1.2 by quoting what you have seen in the tricolor screen.
Get back into that screen , making sure you have removed the sim and sd card and then conect to your computer via the usb cable.
You would have downloaded an spl1.2 rom ( you previously stuffed the radio by trying to flash an spl3.5 rom) and then run the romupdateutility .exe .
then you should be sweet!
having read a reply of cmonex to another post I am starting to think that all hope is lost.
It seems that if windows is unable to recognise the phone it is possibly the case that it is completely f*cked!!!
It would be nice if someone could clarify this...
Which WM to ul now?
Dear Iakeman,
thank you so much for your kind reply. So at this stage I can try to upload to my Athena device, basically, any spl 1.2 rom of WM 6.0, or 6.1 or even the 6.5 beta?). Or I must start with spl1.2 rom WM 6.0 ?
Yes! It works!
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
imaginarynumber said:
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Thanks
Click to expand...
Click to collapse
just a thought.
Once you finished doing mtty, did you reenable usb in activesync as per this post
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=2
the other thought was is the usb cable and the usb port able to sync with other wm devices? maybe the slot on your athena is faulty?
Hi Lakeman
Thanks for the reply.
It is possible that the usb port is faulty but it seems improbable that this should have failed at exactly the same time as me stuffing up the O/S.
I will try to find the cmonex post to which I am refering later today (the one that suggests that the phone is stuffed).
Tnx
when i type task 32 show this plz help
Cmd>task 32
Level = FF
puffo said:
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
Click to expand...
Click to collapse
HI PUFFO,
WHICH Cmonex POST 33 R U REFERRING TO?
I M FACING EXACTLY THE SAME PROBLEM THAT U FACED AND AM WAITING FOR THE NEXT STEP.
KINDLY REFER ME TO THE POST SO THAT I CAN START USING MY ATHENA.
THANX
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
ERMANO.ESTE said:
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
Click to expand...
Click to collapse
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
How to get mac address
lakeman said:
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
Click to expand...
Click to collapse
Thanks alot lakeman for ur help.
SOLVED OUT THAT ISSUE, BUT FACED A NEW ONE.
I M STUCK AT BOOTLOADER SCREEN WHILE TRYING TO INSTALL WM6.5.
BUT I FIGURED OUT A WAY BY USING MAC AND MTTY FORMAT.
BUT I DONT KNOW HOW TO GET MY MAC ADDRESS WHILE THE ONLY THING I CAN ACCESS IS THE BOOTLOADER SCREEN?
IS IT PRINTED SOMEWHERE ON MY DEVICE OR MANUALS OR IS THERE ANY SPECIFIC COMMAND FOR THAT?