Hi I am a newbee in tis forum - yesterday i installed the CleanBlack2ReloadedOffice in german on my XDA Star - it worked perfectly ...
Today i wanted to upgrade the radio from Nike_Radio_1.58.16.27 to the better one Nike_Radio_1.58.21.23_25.65.30.04S_Modded.
Result: the flashing stopped with 99% an now i am stuck on this boot-screen and my phone is a brick :-( It says:
RUUNBH
NIKI300
SPL-1.16.0000
CPLD-4
I tried several things to get the phone alive - but nothing helped every trial failed with the grey screen and a 0% on it - some 5 Minutes later aborted with error. What can I do?
Thanks in advance to any helpful hint!!
tip
It seems that you have not installed hard spl first
Hi 2alive - quite right. I copied the sspl-1.16-nike.exe on the device and started the Update. It stuck on 99% - ended with an error.
But now i am not able to install hard spl or anything else? I allways get the 0%-Load-Screen on the device and after 10 Minutes an 262-Error.
Is there hope to get this device running?
Any helpfull advices? Thanks in advance
Usually Device Boot Loader original can be updated using ROM Upgrade Official from HTC website. Just try it and hope it will restore your OS. When you are in Bootloader screen and connect to PC using USB Cable just run the ROM upgrade official setup and just click the status connected to ActiveSync (although you are not connected to ActiveSync coz you are already connected to USB) and go next and update, It still can upgrade the ROM.
FYI : Just Remember Original Bootloader can not upgrade Radio or ROM from Modded / Custom ROM setup thats why you need to install HardSpl to allow upgrade from Modded version.
Thank you lion _snake1 for your Tipp.
I tried now to load every shipped original rom - but the Rainbow-Start-Screen does not go away. Is there any other chance to get this device again working? Did anyone made experiences with this strange behavior?
I really would be glad, if there is a "howto" get into a working communication process between my "Pc" and my phone?
Is the ROM Upgrade Official setup can run 100% and finish ?
If it can then maybe the problem is in your Bootloader.
Maybe you can go to forum section "xda-developers - General discussion - Upgrading, Modifying and Unlocking" and start the same thread since that section is special for Upgrade and Mod and i think some of experience people usually online there.
hi lion_snake1
thank you for your advice - there i did not found any solution till now. I tried to load everything - but all originals or mods will stand on a grey screen with 0 % an dont move- then the error comes with 262. I already tried to boot via sd-micro-card - did not work - the device blinks a moment - as if it is searching fo rsomething and sticks again in the rainbow bottloader ....
i am looking for a step by step help for mismatched romupdates.... also with commando-lines-hacks....
Related
hey there been a member for sometime and have tried to search for a solution to my problem and am abit confused.
and sorry if its such a newb question (dont burn me for it)
i have an o2 atom exec (using RC3 rom with touchflo) and yesterday i /soft reseted/ the phone because it was acting funny, after the reset it would be stuck at the startup screen and would not load past that the whole day, so i waited and re-tried in the evening.. the same thing occured... i was at the time able to load into bootloader (MN2) but then could do nothing else.. so i searched throughout the forums and found a post by 'chartreux' http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0 but had not read the entire post and proceeded to load (mn1) onto my phone via mini sd card and it worked, my phone was working again, it performed a hard reset and restored it to factory settings (ie: calendar, msgs, contacts, software all gone) and phone is working normally again... since it has done this i wanted to update to 'wm6.1 atom exec rom' just to be up-to-date and have synced it via activesync and have run "DSUU" but my phone just restarts and loads the current rom i have installed! and just repeats everytime i have tried (have tried atleast 50 times)
so my main question.. is my bootloader dead? i know my phones not bricked since its still working perfectly im just not able to upgrade my ROM but can still do everything else (such as browse through files, run programs, make calls)
and last of all.. can anybody please help?! as i am at the point running the phone over with my car!
and once again am sorry for the stupid question.. =/ and thanks for hearing me out!
cheers!
stylistik said:
hey there been a member for sometime and have tried to search for a solution to my problem and am abit confused.
and sorry if its such a newb question (dont burn me for it)
i have an o2 atom exec (using RC3 rom with touchflo) and yesterday i /soft reseted/ the phone because it was acting funny, after the reset it would be stuck at the startup screen and would not load past that the whole day, so i waited and re-tried in the evening.. the same thing occured... i was at the time able to load into bootloader (MN2) but then could do nothing else.. so i searched throughout the forums and found a post by 'chartreux' http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0 but had not read the entire post and proceeded to load (mn1) onto my phone via mini sd card and it worked, my phone was working again, it performed a hard reset and restored it to factory settings (ie: calendar, msgs, contacts, software all gone) and phone is working normally again... since it has done this i wanted to update to 'wm6.1 atom exec rom' just to be up-to-date and have synced it via activesync and have run "DSUU" but my phone just restarts and loads the current rom i have installed! and just repeats everytime i have tried (have tried atleast 50 times)
so my main question.. is my bootloader dead? i know my phones not bricked since its still working perfectly im just not able to upgrade my ROM but can still do everything else (such as browse through files, run programs, make calls)
and last of all.. can anybody please help?! as i am at the point running the phone over with my car!
and once again am sorry for the stupid question.. =/ and thanks for hearing me out!
cheers!
Click to expand...
Click to collapse
what version of your bootloader now? MN2 or MN1? if still MN1 please read again the thread to update your bootloader to MN2 (since your device is ATOM EXEC).
and after done, please check when you run DSUU, see on the left bottom whether have a drop down box or not? if yes then choose "ALL"
hope this can help to solve your problem.
hey! thanks for the reply mate!
but im not sure i cant check the version of my bootloader...
wont let me get into it by pressing camera+SR or camera+off button..
just boots straight into the operating system.
and, as for the DSUU it just restarts the phone after i choose all, and goes through to the today screen on the phone, and as for the DSUU update its stays at the screen which shows "The current software is now being updated from your device."
followed by an error appearing after a few minutes showing " No download target was found!!" even though my atomexec is synced
which is then followed by the "connection error" screen.
please help.. this is seriously pissing me off...
stylistik said:
hey! thanks for the reply mate!
but im not sure i cant check the version of my bootloader...
wont let me get into it by pressing camera+SR or camera+off button..
just boots straight into the operating system.
and, as for the DSUU it just restarts the phone after i choose all, and goes through to the today screen on the phone, and as for the DSUU update its stays at the screen which shows "The current software is now being updated from your device."
followed by an error appearing after a few minutes showing " No download target was found!!" even though my atomexec is synced
which is then followed by the "connection error" screen.
please help.. this is seriously pissing me off...
Click to expand...
Click to collapse
try to downgrade again your bootloader to MN1 (please do it step by step). as long you can secure your bootloader, hopefully you can resolved your problem.
remember to upgrade again to MN2 once you able to downgrade to MN1 before try flashing to wm6.1.
good luck.
still cant access bootloader.. even when trying DSUU it just boots straight into the operating system, when trying to update and also i tried the MN1 bootloader again and tried to get into it... still nothing.. it just resets, i tried it with my 4GB mini sd, 2gb msd, and a 64mb mini sd.. could not get into it... sigh...
Ok try a deep breath and read all the posts on dead boatloaders and other upgrading problem posts through and through. Then try to change ur USB cable and what system are u using i.e XP or Vista????
thankyou kindly, for the suggestions i have been reading through alot of posts and tried alot but.. nothing so far.. i guess its not too bad since its stuck on windows mobile 6 with abusalzas rom..
im just annoyed i cannot upgrade to the latest 'rom' and since my phone 'had' to perform a hard reset why not update so yeh.. and i am using windows xp for my computers os.
Did u change the USB cable mate, once I had to do it and the interesting thing is that the same USB cable was working perfectly for other things but causing problems when connecting to my Atom Exec.
yeh tried it with my old v3 cable didnt work has the same outcomes.. sigh.. i might try that dead bootloader hardware and software recovery from this post by Alex_Beda & 1stMASTER
http://forum.xda-developers.com/showthread.php?t=336278
what you think?
although my phone doesn't resemble there symptoms list.. as it still works and everything just cant get into the damn bootloader.. :/ when done manually and when trying to upgrade..
Did u read this mate ?????
http://forum.xda-developers.com/showthread.php?t=358442
You just try the DSUU with upgrade "OS" only and not "ALL".
alright cheers buddy! ill try it out and i hope it works!!
bahh.. didnt work =( just restarted my phone and gave me a connection error screen on my computer....
Actually i have the same problem, i tried to get into the bootloader by press and hold camera + reset button it just restart and load the WM
Dead atom exec
My atom exec having problem ( dead ), so after press camera reset sw my atom can booting normaly but touch screen function only for entering password and then touch screen not response anymore. I check the system information by touch the button (manualy) but IMEI not ready and Radio not ready.
Pls someone can help us.
o2 atom bootloader
hello
my o2 atom bootloader screen mn1 dignostic manger screen remains after rom flashing .i tried flashig orginl rom and pedvit rom but bootloader screen comes again .not starting my mobile please help
Hi all,
I've got a problem with my hermes phone which I can't solve by my own I think :
My device gets stucked while booting. It just shows a "htc smart mobility" screen and displays the various red numbers on the bottom for some seconds (as usual I think). But it's not going any further (waited for about 20 minutes).
I flashed the "Hermes.DarkVisions.v5.17.23017.Manila" rom over my exisisting "Schap's 4.22" rom a few hours before. The rom was running good. Then I executed the "kill em all" app by mistake, which can be found in the accessory folder as far as I can remember. Then the phone began to work very slowly so I decided to restart it. And now its not really working any more.
By connecting the phone with my pc and trying to flash a new rom, I get the RUU Error "200 INVALID UPDATE TOOL" - what does this mean? The auto detection of the current bootloader obviously doesn't work due to no running windows mobile.
Is there any chance to flash the phone without a running windows mobile? Or what else can I do to get the current rom "Dark Visions" running again?
Thanks a lot for your help,
Michael
Press The Power, The ok button (usually found on the left side) and The reset button using your pen until this rainbow coloured thing comes up.
Plug it into your USB and then reflash your ROM, also don't forget to upgrade your radio as you will need it to stabilize your custom ROM which you will find under wiki part of this forum. Just search "Hermes Radio" and click the first thing you see.
Now your device should be back to life again.
OK, so I've been reading the Common Upgrade Problems on the wiki, and I saw this:
Important : Windows VISTA users need to make a change to their system to successfully use many ROM packages. See Mr. Vanx's guide here.
Click to expand...
Click to collapse
Since Mr.Vanx's website was taken down, I ask you what are the changes i need to perform and if I need to apply them to Windows 7.
Best wishes!
Any help in here?
Please, i have the same trouble. I didn't work with Windows 7. Does Anyone know a solution?
hey guys, im having major issues with my HTC HD2.
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
STATS:
os version: 5.2.21869 (21869.5.0.82)
manila version: 2.5.20121431.1
ROM version: 1.72.841.0 (82124) WWE
ROM DATE: 02/23/10
Radio version: 2.07.51.22_2
protocol version: 15.32.50.07U
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it. but, i cant upgrade my rom! i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
someone please help! PLEASE!
im sorry if this is a simply fix and im being a noob, but i just am stuck real bad!
thanks in advance guys
ryan
start with HSPL!!!
ryan whitmore said:
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
Click to expand...
Click to collapse
Changing to a customized ROM is very different from upgrading through HTC website , and it starts by installing HSPL on your phone..
you should start here
http://forum.xda-developers.com/showthread.php?t=609477
but its probably easier to resolve your current "SW issues" than installing a customized suitable ROM for you at this stage.. so why dont you post what the SW issue is instead.. (unless your phone does not boot at all now..)
rgds
just quickly, sw issues?
SW issues
ryan whitmore said:
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it.
Click to expand...
Click to collapse
software issues = SW issues
Depending on what your Software problems are you could try to post them and try to solve it.
The fastest ways is to install the right HSPL you can use the link in the post of "ugguggh" which has a good manual about how all works. You also can read through the 1st two posts in de threat displayed below. Here you cna find which HSPL you need for your version.
CLICK HERE!
After installing the right HSPL its just a matter of choosing your desired ROM and install it.
I'm currently working with the Artimis V27 ROM NL and i'm not experiencing any problems it runs very smooth. Just format your SD card and try to download Task29. First run "Task29" before installing the ROM. It cleans up old stuff from your old ROM install. After Task29 finished press volume down before it reboots your phone so you enter the bootloader. Now you can start the CustomRuu application and install your desired rom. (if you enter a blanc HTC screen after Task29 (thats normal because there is no OS to load anymore) just remove the battery and hold volume down while putting the battery back or using the power on button)
ryan whitmore said:
i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe
Click to expand...
Click to collapse
dont do that, put customruu and the nbh in a folder on their own, then right click customruu and choose run as administrator (do this even if you are logged in as administrator)
and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
Click to expand...
Click to collapse
use a usb port around back of the pc, not in the front case.
the 'you need 1.42.0000...' is wrong, its old info. Use hspl3 and choose 2.08.hspl
THANKYOU! but here are my sw issues
hey guys thankyou for all ur help, i downloaded hspl3 and it worked and i have tested a few different roms,, and i installed Miri_HD2_WM65_21908_Sense25_V17.0_WithSwype, which is working quite well right now and i am pretty damn happy with it so far.
i installed S2U2 and since then it started to play up a lil..
the issues are that in general the whole entire system is slow. not neccesarilly windows but sense... :\
messages are sometimes unusable, frozen very laggy, and occasionally needs a soft reset. phones is unusable, can make calls, just cant hear dialtone, microphone sender and recevier isnt working, NO SOUND! shortcut calender viewer on the sense homescreen takes mins to hours to load appointments and sometimes doesnt for days. and in saying sometimes is lightning quick...???
besides that i am not experiencing many other issues YET...i will have to wait a few more days. though i would really like a solution to the phone issue if that is possible
would love to beable to use a android port (a very good, everyday use version), and if anyone has any info on it, would u beable to post some for me please
i have tried haret and it wont work. i load clrcad then haret it runs through the first stuff, then the screen starts to fad and i get lines on the left then it slowly goes black and nothing happens. requires a soft reset to get the phone working again..
I AM JUST FULL OF ISSUES! sorry guys
anyways thankyou EVERYONE for all your help u have been great so far
thanx
ryan
I CANNOT believe this is a dead end . . as far as i have learnt from any "radio bricked" posts I have come across.
I am not a techie to start with but what could possibly be an unrecoverable damage unless the wrong radio flash impaired some hardware in the phone? This post, I hope, will also serve as an appeal to all the tech gurus out there saying "here's your nemesis . . radio brick"
I have an HD2 originally WWE ROM and then I decided to flash Dutty's after a radio (2.15) flash.
Then I was also able to run Android. Every thing was fine except for battery drain in Android so I said to myself "lets go back to winmo for a while".
aa aa . . not yet . .winmo was fine too except for some symptoms like sound failure, time sync failure, occasional hangs and so on which were fixed after a soft reset / restart.
Then .. one fine day (3 weeks from flash date) I woke up to a frozen phone. I tried restart/reset (soft and hard) nothing worked. I was always stuck in the white screen. I was still able to go to bootloader though.
Now the discovery of the nemesis. Tried the following proposed solutions
1. Flash Ship ROM from PC - The flashing would start and stay at 0% - ERROR 272 - Failed Connection - Recovery did not work either
2. Flash Ship Radio - Same error
3. SD card Flash ROM - Completed but the phone would go beyond the white screen
4. SD card flash Radio - Getting the infamous "Radio - Error" Update failed. Update terminated
5. Goldcard - Unfortunately I cannot even try it since the CID of the SD card can only be obtained via communication with my phone.
Now for the big question:
Whats going on???
Can I just wipe everything from my phone and start from scratch? like from command line so to speak . .?
This cannot be unless the phone can never ever be reused without changing a faulty hardware
Update: Solution
I had to delete this section since the information provided here was incorrect .. sorry . . still no solution
i am no expert..but just a suggestion
since you can enter bootloader...can i assume u have HSPL2?
if yes, you might want to do a Task 29.
then reflash a new rom.
dutty rom works fine with 2.15 radio
good luck
I see it's your first post here, you have to read very carefully and know what you are doing before flashing your device.
If you flashed your stock ROM thru SDCard method (a stock ROM is device specific), then your device should be in original state: stock SPL, stock Radio, stock BootScreen and stock OS (the 4 parts of a ROM).
So if it doesn't go beyond the white screen after that, you probably could send it back for repairs (if warrenty is not due).
But if you can enter the Bootloader, it's probably not bricked.
But if you can enter the Bootloader, it's probably not bricked.
Click to expand...
Click to collapse
sadly not quite correct. there are a few dozen references to the infamous radio update brick, where flashing seems to work, hspl'ing seems to work, but after restart nothing has changed.
The only suggestion i have to offer is finding another winmo phone (or pc/laptop sd card reader that is pci not usb based) and using that to create the goldcard, though even there i suspect it may not help.
If u can enter boodloader, make sure you see it's connected and see: USB at the bottom white part.
If this is what you see, i would set the stock rom back so everyrthing is back to normal.
Then read these forums good before you proceed.
Succes
Same thing happened to my phone, nothing will fix this, flashing a stock rom gives an error msg half way through , flashing custom rom also gives error. Factory reset, after resetting it gets stuck on htc screen.
weird, my radio is not working too, happened few days ago...
You could always try and remove the SD Card and then switch on into Bootloader Mode. Connect to the computer. Then run a Stock/branded ROM from HTC's website with your phone's serial number (this should at least guarentee that you are downloading the correct ROM).
Original post updated with solution
samsamuel said:
sadly not quite correct. there are a few dozen references to the infamous radio update brick, where flashing seems to work, hspl'ing seems to work, but after restart nothing has changed.
The only suggestion i have to offer is finding another winmo phone (or pc/laptop sd card reader that is pci not usb based) and using that to create the goldcard, though even there i suspect it may not help.
Click to expand...
Click to collapse
--- Tried goldcard method every which way possible.
fred_up said:
You could always try and remove the SD Card and then switch on into Bootloader Mode. Connect to the computer. Then run a Stock/branded ROM from HTC's website with your phone's serial number (this should at least guarentee that you are downloading the correct ROM).
Click to expand...
Click to collapse
-- Tried this as well with no avail....
htc hd 2 leo having problem
sir i have htc hd 2 leo and i was updating the softwere and then it stuck to 90 % and now i am having a screen with 3 colours ... my spl 0.64 version is not going to upgrade and i cant find file on internet working with this version, your already posted files are not working ...
please help me how i can i get rid off this problem and my phone work again ... tell me the whole procedue how to get radio and convert it on android ...
mairu834 said:
sir i have htc hd 2 leo and i was updating the softwere and then it stuck to 90 % and now i am having a screen with 3 colours ... my spl 0.64 version is not going to upgrade and i cant find file on internet working with this version, your already posted files are not working ...
please help me how i can i get rid off this problem and my phone work again ... tell me the whole procedue how to get radio and convert it on android ...
Click to expand...
Click to collapse
It's a prototype, notice the SPL 0.64
Flash stock rom back and then Radio 2.x
This way you can flash newer roms.
Notice you won't be able to install Android or WP7 cause of Prototype having diffrent hardware!
http://forum.xda-developers.com/showthread.php?p=7896583#post7896583
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
king roro said:
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
Click to expand...
Click to collapse
Hi,
Since you have enough experience in flashing custom ROM, I would suggest you the following ways:
1. Make sure battery is at least 50% and the battery pins are not bent
2. Format your micro sd card to fat 32
3. Find and download the CORRECT STOCK ROM. You can download it from htc website if your hd2 is non branded, or you can download it from your carriers website if your hd2 is a branded one. Make sure the downloaded file is not corrupt due to download process
4. Extract the downloaded file using 7 zip or winrar. Find the file named: RUU_signed.nbh Then, rename it to: leoimg.nbh then copy it to the root directory of your micro sd card
5. Go into boot loader and follow the onscreen instruction. If therenis no hardware issue, it should work.
Good luck ...
thanks m8 but I've checked the pins and changed the battery with fully charged one ..
but it's no boot loader mode ... its completely off
thanks 4 ur support
Not offering solution, just an observation,,,, hanging at HTC screen and only occasionally booting, plus flashing hanging at. 9% is a bad sign, sometimes associated with a stuck radio, and/or/caused by thermal issues.
Try chilling the phone with stock nbh ready to go on SD card, in sealed bag in fridge/freezer for a while, then try to SD flash.
If flashing starts, (white screen blue writing) keep an eye out for "rsa radio fail" or similar.
if the flash goes well, but then later the problem returns, it's pretty conclusively hardware.
thanks buddy for the advise but as I mentioned b4 ...
the device doesn't boot anymore ... and yeah it's Hardware bug I think.
best regards