i bought 8gb SDHC card for testing drivers
already tested the attatched driver and had softreseted each time but had to hard reset in the end since my own 2gb card stopped being detected.
kamalneet said:
i bought 8gb SDHC card for testing drivers
already tested the attatched driver and had softreseted each time but had to hard reset in the end since my own 2gb card stopped being detected.
Click to expand...
Click to collapse
Unclear on what the conclusion was did it work ? just stopped recognizing your 2 gig
I think it is the same driver as this post
http://forum.xda-developers.com/showpost.php?p=3682752&postcount=5
yes this post and more from ipmart threads ,its strange i guess htc magician or wizard might have got a sdhc driver and wm6.1 so we should be given drivers too ,(not a petition though) someone with deeper knowledge of hardware might help all prophet users.i even used PE Explorer to open these dll files but couldn't understand them. the cabs have some registry settings i gues those are device specific. so we need a parallel device of same architecture and chips.
htc universal too had such problems solved in threads below
http://forum.xda-developers.com/showthread.php?t=317925
http://forum.xda-developers.com/showthread.php?t=317925
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"Dll"="omap850_sdhc.dll" exists in dudexx 6.5 roms from chj china may be again ask chinese help here.
various omap850_sdhc.dll exist in sizes 31kb 33 kb 36 kb 42kb point is which one to use.
translate this one http://www28.discuss.com.hk/archiver/?tid-1188186-page-14.html and a dopod 818 pro user here says he replaced 36kb file with 31 kb to solve sdhc problem of omap850_sdhc.dll even though 31kb file meant slow transfer rate. but he didn't post the file there.
there must be some dll repositary.
very important thread http://forum.xda-developers.com/showthread.php?t=376014 says hc in omap850_sdhc.dll means not high capacity but host controller but the actual SD card drivers are sdbus.dll and sdmemory.dll.
msdn http://msdn.microsoft.com/en-us/library/aa918430.aspx might help
kamalneet said:
yes this post and more from ipmart threads ,its strange i guess htc magician or wizard might have got a sdhc driver and wm6.1 so we should be given drivers too ,(not a petition though) someone with deeper knowledge of hardware might help all prophet users.i even used PE Explorer to open these dll files but couldn't understand them. the cabs have some registry settings i gues those are device specific. so we need a parallel device of same architecture and chips.
htc universal too had such problems solved in threads below
http://forum.xda-developers.com/showthread.php?t=317925
http://forum.xda-developers.com/showthread.php?t=317925
Click to expand...
Click to collapse
I think, Wizard has a similar problem too. If someday Wizard does support it. We could try to use their drivers
SDHC Support Prophet
One Mr Doodle has reported that he used 8GB SDHC with Shadow 2 TE Rom (plz see the relevant forum), but only 3.7 GB is detected by the device. For info, this may help. Anyone else tried this ?
check this one
hi my friend, I've found one driver, but I dont have any SDHC card so you can try it ;-) I've tryied it on my prophet with 4gb non-SDHC and this one ave disappeared, so WARNING you have to flash your system back when It's not working, but I think you can try it >>Link for this driver<<
me trying too, ....... sorry not working.
okay
yes, I guess that, keep searching
sdhc support prophet
probably ipl spl are incompatible to support sdhc.
anyone one to try this one
SDHC cab
and confirm of course.
varanusvincent said:
anyone one to try this one
SDHC cab
and confirm of course.
Click to expand...
Click to collapse
Transceng 4Gb SDHC not working.
Apacer 2Gb SD card still working.
Wi-fi not working...
R0ck4ever said:
Transceng 4Gb SDHC not working.
Apacer 2Gb SD card still working.
Wi-fi not working...
Click to expand...
Click to collapse
I dont know anymore. Long time ago. Cloudyfa give me other patch. And it wont work too. So maybe we should accept it, that our device can't support SDHC.
Jam sdhc is now supported
if JAm could support sdhc... the problem appears not to be related to hardware, but driver or firmware. with many devices driver has worked.
usmjan said:
if JAm could support sdhc... the problem appears not to be related to hardware, but driver or firmware. with many devices driver has worked.
Click to expand...
Click to collapse
jam uses xscale cpu while prophet uses omap 850 cpu although in theory this cpu supports sdhc but maybe not many prophet users are making noise about it ,thats why no one's bothered.
no this one is already in the zip i provided ,none till now works. keep up the hope.someday a prophet will come to give us our prophets solution.
anyone got some news about sdhc support ,been long time now?
Related
Hi,
Since the drivers in Magician is reputed to work for SD Wifi+256 card, I've been trying to replace the drivers.
There has been a couple of workarounds I've been trying. Insofar, I've only managed to get the Wifi working, but not the Memory part.
I was hoping that registry experts here can impart some knowledge on the stuff. Or better still, perhaps someone has the updated drivers can post it here? :wink:
Anyone has BSQUARE SDIO driver 1.2.0.0 in their Himalaya?
I'm having the 1.1.0.0 version on my 2.06 ROM, but the Magician version is 1.2.0.0. Does anyone has the 1.2.0.0 in their Himalaya ROM?
so you can use a sd wifi 256 mb Sandisk with a xdaII but only in wireless?
If yes, please post the driver pleaseee
l0rdsheva said:
so you can use a sd wifi 256 mb Sandisk with a xdaII but only in wireless?
If yes, please post the driver pleaseee
Click to expand...
Click to collapse
Here it is. It is to be used in conjunction with the PegasSDN.dll supplied by the sandisk pocket pc 2003 drivers for the combo card.
If you are able to use WinCab Mgr, you will find that the sandisk pocket pc 2003 drivers has a SDBusDriver12.cab inside. That also contains a copy of SDIO 1.2.0.0 drivers dated Feb 2004.
Anyhow, be forewarned that the new drivers is not that compatible with XDA2 device and will disable flash storage (means that your "Storage Card" folder will be gone). Not a very good trade to enable wifi using the combo card, if you asked me.
My pocket pc doesn't allow me to overwrite SDBusDriver.dll. Any idea?
yap said:
My pocket pc doesn't allow me to overwrite SDBusDriver.dll. Any idea?
Click to expand...
Click to collapse
I still wouldn't recommend trying it. But what the heck, remember to backup your files and be prepared for hard reset.
go to your registry and edit:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDBusDriver]
edit value "Dll"="SDBusDriver.dll" to
"Dll"="SDBusDriver.bak"
cold reset
copy the new SDBusDriver.dll over (it will override the function of the original version, but will not remove it).
cold reset
Storage card folder is disabled (as new SDBusDriver.dll is incompatible with XDA2, I reckon).
Install Sandisk Wifi+256 combo software from www.sandisk.com. This will provide the Wifi software and SDIO multi-function drivers for the SDIO slot.
Alternatively, if you know how to operate WinCAB mgr, replace SDBusDriver.dll in SDBusDriver12.cab in Pegas2577.cab of Sandisk Wifi+256 combo software. You can just install the Pegas2577.cab and all the required drivers and registry settings will be set automatically.
Sandisk combo card Wifi will work fine, even though Storage is still disabled.
I did tell ya, no point right?
But if someone can make both function works, I will have utmost gratitude. In fact, I'm waiting for my fantasy to happen - that some kind soul in MS or MS partners will release an updated version of WM2003SE ROM for XDA2 - complete with new SDIO drivers, BT stack and WMP10 mobile????
Hi all,
I use WM5storage with WM6 Rom on my S200 but it's very very slow, when my S200 was in WM5 i used Card Export Softick. But i have try Softick in my WM6 and they don't run.
Any other program like WM5storage work in WM6??
Thx
(sorry for my english i'm french)
recently a new version of card export has been released. did you try that one?
and if it works, please tell me if it is really faster than wm5torage and does it also hide the storage card like wm5torage while on usage?
dexxa05 said:
Hi all,
I use WM5storage with WM6 Rom on my S200 but it's very very slow, when my S200 was in WM5 i used Card Export Softick. But i have try Softick in my WM6 and they don't run.
Any other program like WM5storage work in WM6??
Thx
(sorry for my english i'm french)
Click to expand...
Click to collapse
Just a silly question: I've always wondered what to do exactly with this app?
rondol1 said:
Just a silly question: I've always wondered what to do exactly with this app?
Click to expand...
Click to collapse
it lets you use the sd card on your device as a usb flash.
but for me, it is more probable that I am carrying a usb flash than a usb cable.
if you already have an sd card reader on your computer or use activesync to copy files to your device you'll never need it.
gokhanmoral said:
it lets you use the sd card on your device as a usb flash.
but for me, it is more probable that I am carrying a usb flash than a usb cable.
if you already have an sd card reader on your computer or use activesync to copy files to your device you'll never need it.
Click to expand...
Click to collapse
Thanxxx, I thought so already. It sounds a bit out of date.... But then again, if someone can use it, do it! I still wonder why it is present on so many ROM's while space to add usefull stuff is limited. I guess that points out the difference in how we use our Prophet!
It's because of Prophet USB hardware is support only version1.
USB1 Bandwidth is very low when complare with USB2 (~15mbps and ~480mbps)
But this tool is very usefull for me.
i love WM5torage!
for me WM5torage is very useful software for swapping tunes and stuff with friends or works computers (no activesync available there).
As for others, there's one that does the same job called "storage reader"; it's in some ROMS, i think it's in "fantastic mobiz" ROMS. To me, the speed felt the same though.
Softick looks interesting, the compatibility list for the new version states Wizard and Touch(Elf) are supported so surely Prophet too?
why I like wm5torage
The reason I have it in my rom's are as followed
I repaire compurters and I's handy to have some small programs on when going out to customors home's.
When I'm in the car I can use it to conect to the carsterio(it has a usb conection) and this alows me to charge the phone while it at the same time functions as an mp3 player and thats good enough reason for me to keep it in my roms I think
Yes gullum of course it's very nice idea to make it in the rom.
Me too i have a mp3 player in my car et i have a usb connection i connect my phone and i listen the mp3 in my phone by the player.
But for the transfert when i'm in WM5 card export it's fast than WM5Storage
gokhanmoral said:
it lets you use the sd card on your device as a usb flash.
but for me, it is more probable that I am carrying a usb flash than a usb cable.
if you already have an sd card reader on your computer or use activesync to copy files to your device you'll never need it.
Click to expand...
Click to collapse
People need it because it's usefull.
For example: u take a picture by ur mobile phone but u need to edit it by Photoshop. How the way to take out the picture from ur fone without activesync program?
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------
What you see above were the most expected questions of a newbie to ROM upgrading in O2 Atom Life[O2 comet]
Here is the most simple guide in upgrading the device. This is based on my personal experience so any deviation ca be expected in case you do it yourself. But most of the steps are just ubiquitous in case of any attempt at upgrading the ROM in Atom Life[O2 comet]
--------------------------------------------------------------------------------------------
INSTRUCTIONS:
Formatting card & setting the file type to fat16 or fat on your PC or with the help of any pocket pc application.
Then you need to copy the file[xxx.DIO] on your memory card[not in any folder] Just reset the device pressing record[in right middle side] along with stylus in the softreset hole[in the left botton side]
Take Stylus out first & then keep pressing the record button until black screen with minisd detect appears.
Thats it. Now it will start installing the ROM from the memory card.
Things to remember:
1.get 1gb or less card[2gb won't do at times]
2.Format it in windows or in your ppc in either fat or fat16 format[don't do fat 32 it won't work]
3.Copy the file on the memory card[not to any folder in it]
Hope the guide will help you & you will have no problems in updating the phone reply if there is any problem.
Regards
Saksham Katyal
W/O RUU for Atom life it is a hard nut to upgrade ROM in Atom life. I hope develpors may have some answer for this.
sakshamkatyal said:
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
Hi guy, can only adv you the pt(1) + (2)...
1.I am not able to get the Record+Reset working on my Atom life: You must Press Record + Reset, leave Reset first.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct: Yes, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO)
Good luck!
I didn't get you my friend. plz be more clearer.
1. Press Record + Reset, then leave Reset first but still keep pressing Record. AL will be in Bootloader mode for yr up ROM by SD.
2. For up ROM by SD, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO).
3. AL can support 4G SD w/o no any problem, not yet test for 8G SD.
bravedoan said:
1. Press Record + Reset, then leave Reset first but still keep pressing Record. AL will be in Bootloader mode for yr up ROM by SD.
2. For up ROM by SD, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO).
3. AL can support 4G SD w/o no any problem, not yet test for 8G SD.
Click to expand...
Click to collapse
have u tried flashing using a 4G card?
2G cards never worked for me. I use a 512M card for flashing. Without RUU u can't flash a custom ROM.
but maniac i have seen you claiming that 2gb card does work. thats whar made me confused.thanx allover..anybody tried 8gb on life with minisd adaptor.
sakshamkatyal said:
but maniac i have seen you claiming that 2gb card does work. thats whar made me confused.thanx allover..anybody tried 8gb on life with minisd adaptor.
Click to expand...
Click to collapse
naah. i dont think I have ever mentioned that before. If I have, then its by mistake. My bad then.
@Maniac, Don't bother brother. May be it could have been because of some mistake or may be in some other context.
Anybody tried 8gb microsd with minisd adaptor. Actually I wish to post results myself but the problem is that its not available in my city so have to order from ebay so a bit reluctant if it doesn't work.
Thanks & Regards
Saksham Katyal
My suggestion. Keep a smaller mini SD for flashing and a higher capacity card for other purposes. From my personal experience of using a 4GB card. Read is quite slow at times. It could also give issues while booting if you install applications on memory card.
I think I have no other option but to buy one. Hope it won't turned out to be a bad deal.
@maniac, bro why you have this slow reading problem when I don't imagine this can be there in such a high model PPC.
Moreover let me confirm everybody once again that the 2gb minisd won't work for ROM upgradation but 1gb does work like charm so try it w/o any doubts. It is confirmed as I have experimented with few of the phones.
I don't know if this may help you:
http://forum.xda-developers.com/showthread.php?t=401336&page=1
http://forum.xda-developers.com/showthread.php?t=401336&page=2
sakshamkatyal said:
I think I have no other option but to buy one. Hope it won't turned out to be a bad deal.
@maniac, bro why you have this slow reading problem when I don't imagine this can be there in such a high model PPC.
Moreover let me confirm everybody once again that the 2gb minisd won't work for ROM upgradation but 1gb does work like charm so try it w/o any doubts. It is confirmed as I have experimented with few of the phones.
Click to expand...
Click to collapse
Speed of the processor has got nothing to do with the SD card reading speed. It all depends on the card driver. My 4 GB is a pain at times.
maniac2403 said:
have u tried flashing using a 4G card?
2G cards never worked for me. I use a 512M card for flashing. Without RUU u can't flash a custom ROM.
Click to expand...
Click to collapse
2G is working for me. Never test 4G to flash ROM.
Really bravedoan? Thats a surprise I must say for me atleast as it didn't work for me. Anyway thanx for your reply. Any idea of 8GB working on Life?
sakshamkatyal said:
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
Can you help please?. My rw6815 after upgrading to wm6.1 of Biohazard cable / pc is total block. Before I left the blue screen of Biohazard. Today, after many restarts I managed to bring up the black screen with writing "Device clean boot ...... reset to factory default !!"""". I attacked the usb to PC for power and possible connections to the PC . But an hour has not changed and the computer screen does not acknowledge it. What do I do ????? Greetings Raphael. Translated from Italian by Google.
Oh Poor dib,
Mate this handset seems to me is identical to O2 Atom phone. So its better if you just check out a similar thread catering to Atom users. Try Wiki if it can help. We are users of Atom life which is not the phone which you are asking about. I could have helped you had it been an HTC phone which I used for long time. But this is my first O2 phone so can't help much. Hope someone knows about this problem comes out with its solution. Good luck brother.
Regards
Saksham
dib0231 said:
Can you help please?. My rw6815 after upgrading to wm6.1 of Biohazard cable / pc is total block. Before I left the blue screen of Biohazard. Today, after many restarts I managed to bring up the black screen with writing "Device clean boot ...... reset to factory default !!"""". I attacked the usb to PC for power and possible connections to the PC . But an hour has not changed and the computer screen does not acknowledge it. What do I do ????? Greetings Raphael. Translated from Italian by Google.
Click to expand...
Click to collapse
Just out of curiosity, do you have an external storage card inserted?
I inserted a 1gb miniSD from FAT32.
I think you have not followed the instructions carefully. Follow the instructions by formatting card & setting the file type to fat16 or fat on your PC or with the help of any pocket pc application. Then you need to copy the file[xxx.DIO] on your memory card[not in any folder] Just reset the device pressing record[in right middle side] along with stylus in the softreset hole[in the left botton side]
Take Stylus out first & then keep pressing the record button until black screen with minisd detect appears.
Thats it. Now it will start installing the ROM from the memory card.
Things to remember:
1.get 1gb or less card[2gb won't do at times]
2.Format it in windows or in your ppc in either fat or fat16 format[don't do fat 32 it won't work]
3.Copy the file on the memory card[not to any folder in it]
Hope the guide will help you & you will have no problems in updating the phone reply if there is any problem.
Regards
Saksham Katyal
Alright, I'm pretty new to this whole forum so I'll just cut to the chase.
Not sure if this is the right section but here it goes:
I have an i-Mate JAMin with Windows Mobile Version 5.0 OS 5.1.70,
I'm looking to update it to Windows Mobile 6 as I hear it gives better performance and uses less battery. So what would be the best way of doing this? No idea where to start frankly as I don't want to brick the phone or screw it up. If someone could lead me in the right direction that would be great . I also just went to install ActiveSync on my computer today as the phone kept saying I needed it but apparently ActiveSync on Windows Vista is: Windows Mobile Device Center so I have that installed now if that helps.
Thanks.
Oh and another question a bit off this thread topic is I'm looking to purchase a memory card, Apparently this phone only supports up to 2gb sd card memory.. Though I've heard people using 4gb and 8gb Sd cards in there JAMin phones...
PLEASE first read the first topic before "cutting to the chase" and then write about problems with understanding all in the same topic
but anyways whats doe is done so shortly you can get a flash program like lazytools
but i you want to do it yourself youll have to plug your ppc in the computer, download hspl ,a program for your ppc which will turn your display white, and then run your flash program from your pc follow the steps and wait 10 mins
and every reflash will need you t flash back to original wm5 rom
for more questions search other topics or the wiki page
itprotj said:
Alright, I'm pretty new to this whole forum so I'll just cut to the chase.
Not sure if this is the right section but here it goes:
I have an i-Mate JAMin with Windows Mobile Version 5.0 OS 5.1.70,
I'm looking to update it to Windows Mobile 6 as I hear it gives better performance and uses less battery. So what would be the best way of doing this? No idea where to start frankly as I don't want to brick the phone or screw it up. If someone could lead me in the right direction that would be great . I also just went to install ActiveSync on my computer today as the phone kept saying I needed it but apparently ActiveSync on Windows Vista is: Windows Mobile Device Center so I have that installed now if that helps.
Thanks.
Oh and another question a bit off this thread topic is I'm looking to purchase a memory card, Apparently this phone only supports up to 2gb sd card memory.. Though I've heard people using 4gb and 8gb Sd cards in there JAMin phones...
Click to expand...
Click to collapse
look at the lazy tool forum... trhe you will find everything to update your smartphone to wm 6, 6.1 or the newest 6.5
Any chance someone could help me through it? Would be appreciated...
after updating my htc snap to windows mobile 6.5.Mapking 2007 cannot be install into my device.Can anyone help?
What about contacting the creator of the software?
fishballnice said:
after updating my htc snap to windows mobile 6.5.Mapking 2007 cannot be install into my device.Can anyone help?
Click to expand...
Click to collapse
how to help when you're not specific about what the problem is? what do you mean by cannot install? what error msg is there? I'm using mapking on wm6.5 on a touch pro and it works fine.
lukesky said:
how to help when you're not specific about what the problem is? what do you mean by cannot install? what error msg is there? I'm using mapking on wm6.5 on
a touch pro and it works fine.
Click to expand...
Click to collapse
My Mapking 2007 just hangs at the splashscreen. This is after I had upgraded from NAFT's 6.1to 6.5 (NRGZ28). Subsequent downgrades to NAFT's 6.1 and then upgrade to other chef's 6.5 led to me thinking..i need HTC HD2.
if you run a check on the official website MK2007 and MKR12 are temporarily not supported on WM6.5. So even if you get urself a HD2 it doesn't solve the problem you're facing. If you really need MapKing, go back to WM6.1
just in case u'r wondering when will it be supported, you have to ask MapKing developers only they have the answer. My guess is there will be a new version of MapKing for WM6.5
Oh... no wonder I can't seem to get MapKing working on my more recent ROMs. But thought I had it working just a while ago (and I was also on a WM6.5 ROM then). Unless it's only with regards to specific builds.
I am using HD 2 and I am also using mapking 2007 on my device.
in fact, i havce mapking 2007 also on my blackstone which is also running on 6.5
I am using Asus P535 with WM6.5 28005 and MapKing 2007, both work fine
fishballnice said:
after updating my htc snap to windows mobile 6.5.Mapking 2007 cannot be install into my device.Can anyone help?
Click to expand...
Click to collapse
Can this explanation help?
http://forum.xda-developers.com/showpost.php?p=4923302&postcount=13
lengendxd said:
Can this explanation help?
http://forum.xda-developers.com/showpost.php?p=4923302&postcount=13
Click to expand...
Click to collapse
Don't think that's the case for me. My MapKing's installed in 'Program Files\MapAsia\MapKing2007'. Doesn't exceed 128 characters.
Thing is I always get stuck at the splash screen.
Perhaps it's really with regards to some builds of WM6.5 since it works for some of you.
ipporek said:
Don't think that's the case for me. My MapKing's installed in 'Program Files\MapAsia\MapKing2007'. Doesn't exceed 128 characters.
Thing is I always get stuck at the splash screen.
Perhaps it's really with regards to some builds of WM6.5 since it works for some of you.
Click to expand...
Click to collapse
I think you don't get what I am trying to say..
Is there any file that exists in any deep directory?
For example..
\Program Files\Folder 1\Folder 2\Folder 3\Folder 4\Folder 5\Folder 6\file name...
As long as there's a file in any folder or folders that has a path name longer than 128 characters, Mapking won't work..
May I propose something..
Try to install Mapking in different location.
If you installed in device, and Mapking cannot work, try to install in Storage Card..
Or if you installed in Storage Card, try to install in device..
lengendxd said:
I think you don't get what I am trying to say..
Is there any file that exists in any deep directory?
For example..
\Program Files\Folder 1\Folder 2\Folder 3\Folder 4\Folder 5\Folder 6\file name...
As long as there's a file in any folder or folders that has a path name longer than 128 characters, Mapking won't work..
May I propose something..
Try to install Mapking in different location.
If you installed in device, and Mapking cannot work, try to install in Storage Card..
Or if you installed in Storage Card, try to install in device..
Click to expand...
Click to collapse
Uh, your 'any file' meaning any file belonging to MapKing? Or just any file in the entire phone? Cos if it's just any file belonging to MapKing, I don't think there's any that exists in a deep directory. But anyway, I'll try installing in Storage Card (since I installed in Device (though all along I've been installing in Device and it was working ok)).
Basically Mapking will search only in either 1 of the 2 places.
If it was installed in the device's memory, it will only search there.
If it was installed in the Storage Card, it will therefore search the Storage card.
Any file, not necessarily belong to Mapking.
For example, if Mapking was installed in the device's memory..and inside the device's memory have such a file with a path name more than 128 characters..
\Program Files\Ancient Literatures from the past\Best literature for leisure reading\My favourite author\This book definitely must be read\The best text that you must ever read\This text file is really very long to read.txt
The Mapking can't work..
Hey you're right! Installed it to my main microSD but it still didn't work. Then tried installing it into a spare microSD (that didn't contain any other files) and it works! Think for Device itself it might be due to the additional files from TF3D while for my main microSD, it might be due to my MP3s (cos they're stored in sub-folders). Now gotta figure out a workaround for this (cos I can't be using a separate microSD just for the MapKing).
ipporek said:
Hey you're right! Installed it to my main microSD but it still didn't work. Then tried installing it into a spare microSD (that didn't contain any other files) and it works! Think for Device itself it might be due to the additional files from TF3D while for my main microSD, it might be due to my MP3s (cos they're stored in sub-folders). Now gotta figure out a workaround for this (cos I can't be using a separate microSD just for the MapKing).
Click to expand...
Click to collapse
Glad to be able to help.
Maybe you can just rename the folders or the files..
Anyway 128 characters for path name is quite enough..
Now if only there was an application that could help list down the directories/files that exceeded 128 characters...
ipporek said:
Now if only there was an application that could help list down the directories/files that exceeded 128 characters...
Click to expand...
Click to collapse
If you installed in your main Storage Card, maybe you can use a card reader to copy all the things to your desktop pc.
Then with the Mapking installed in that main Storage card, slowly delete 1 folder by 1 folder. Until the Mapking can work.
Then you will know, which is the culprit. After that, just rename that file to another name..
Hi,
I was on Touch Cruise which comes with MapKing! R12
Just upgraded to HD2, thus installed the R12 on it.
It does not work, giving me
Device check failed?
Program terminated...
Anyone can help? Thx