Hi,
Since the drivers in Magician is reputed to work for SD Wifi+256 card, I've been trying to replace the drivers.
There has been a couple of workarounds I've been trying. Insofar, I've only managed to get the Wifi working, but not the Memory part.
I was hoping that registry experts here can impart some knowledge on the stuff. Or better still, perhaps someone has the updated drivers can post it here? :wink:
Anyone has BSQUARE SDIO driver 1.2.0.0 in their Himalaya?
I'm having the 1.1.0.0 version on my 2.06 ROM, but the Magician version is 1.2.0.0. Does anyone has the 1.2.0.0 in their Himalaya ROM?
so you can use a sd wifi 256 mb Sandisk with a xdaII but only in wireless?
If yes, please post the driver pleaseee
l0rdsheva said:
so you can use a sd wifi 256 mb Sandisk with a xdaII but only in wireless?
If yes, please post the driver pleaseee
Click to expand...
Click to collapse
Here it is. It is to be used in conjunction with the PegasSDN.dll supplied by the sandisk pocket pc 2003 drivers for the combo card.
If you are able to use WinCab Mgr, you will find that the sandisk pocket pc 2003 drivers has a SDBusDriver12.cab inside. That also contains a copy of SDIO 1.2.0.0 drivers dated Feb 2004.
Anyhow, be forewarned that the new drivers is not that compatible with XDA2 device and will disable flash storage (means that your "Storage Card" folder will be gone). Not a very good trade to enable wifi using the combo card, if you asked me.
My pocket pc doesn't allow me to overwrite SDBusDriver.dll. Any idea?
yap said:
My pocket pc doesn't allow me to overwrite SDBusDriver.dll. Any idea?
Click to expand...
Click to collapse
I still wouldn't recommend trying it. But what the heck, remember to backup your files and be prepared for hard reset.
go to your registry and edit:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDBusDriver]
edit value "Dll"="SDBusDriver.dll" to
"Dll"="SDBusDriver.bak"
cold reset
copy the new SDBusDriver.dll over (it will override the function of the original version, but will not remove it).
cold reset
Storage card folder is disabled (as new SDBusDriver.dll is incompatible with XDA2, I reckon).
Install Sandisk Wifi+256 combo software from www.sandisk.com. This will provide the Wifi software and SDIO multi-function drivers for the SDIO slot.
Alternatively, if you know how to operate WinCAB mgr, replace SDBusDriver.dll in SDBusDriver12.cab in Pegas2577.cab of Sandisk Wifi+256 combo software. You can just install the Pegas2577.cab and all the required drivers and registry settings will be set automatically.
Sandisk combo card Wifi will work fine, even though Storage is still disabled.
I did tell ya, no point right?
But if someone can make both function works, I will have utmost gratitude. In fact, I'm waiting for my fantasy to happen - that some kind soul in MS or MS partners will release an updated version of WM2003SE ROM for XDA2 - complete with new SDIO drivers, BT stack and WMP10 mobile????
Related
Hi,
I have updated my O2 XDA ROM ver 3.something to 4.00.16 T-Mobile(withProgrammA) and sence then I am unable to update it anymore. The Active sync is working fine with the USB connection, but the ProgrammeA is saying: error getting connnectiontype. I have try it on 2 different computers under w2k and wxp, the problem was the same.
I would like to upgrade it cos is frosing dayly, and the xda-developers ROM was better )))
Thanks, all the best
Have you tried going back to your original rom, then going from there?
Hi,
The ProgrammeA thus't connect a cannot update the ROM how can I go back to the original ROM ?
I know about bootable SDCard but I would prefer not to use it, so I check up for other possibilities :?
flare
Active Sync problem?
Hi Flare,
I don't know if this will be the case for you but have observed connection issues between updates with ActiveSync ver 4.71. I found that I needed to TOTALLY remove, not upgrade / downgrade ActiveSync then re-install the original from your CD [probably ver 4.5]
If you don't have it you need to try and get it, because while it provides other problems of its own in connection messages it appears more robust in file transfer.
If you cannot adequately remove AS 4.71 then you need to delete the folder under program files and start again.
Hope this helps,
Cheers,
David
According to the notes on the ROM Kitchen, you can't update from 4.00.10 or 4.00.16 using Programme A. What you can do, however, is cook an .nb1 file and put it onto an SD Card and use the bootloader. Of course this will require a 32 MB SD card and an appropriate USB or PC Card reader to get the new ROM onto the SD card.
Pleasant interface.
ActiveSync 4 works through USB.
I cannot accede to Storage and ExtendedROM.
All buttons correctly work including camera and record.
Backpack dont works (Some change in the registry to fix that?)
ExtendedROMunlocker dont work.
Resco file explorer works.
Cabinstl works.
I can install programs from PC to PPC through USB (ActiveSync), in PPC (not in PC) screen ask about install in "Device" or "Storage Card".
Internet Explorer works trough USB (ActiveSync)
I cannot make hard reset but I can put it in bootloader mode.
I only have been one hour proving it.
At the moment he is everything.
HDJ80 said:
Pleasant interface.
ActiveSync 4 works through USB.
I cannot accede to Storage and ExtendedROM.
All buttons correctly work including camera and record.
Backpack dont works (Some change in the registry to fix that?)
ExtendedROMunlocker dont work.
Resco file explorer works.
Cabinstl works.
I can install programs from PC to PPC through USB (ActiveSync), in PPC (not in PC) screen ask about install in "Device" or "Storage Card".
Internet Explorer works trough USB (ActiveSync)
I cannot make hard reset but I can put it in bootloader mode.
I only have been one hour proving it.
At the moment he is everything.
Click to expand...
Click to collapse
Tell us something about the speed of the system and the space it takes...
Regards,
Primoz
p.s. Hope it will be soon released a version for the magician :wink:
Some screen captures
I have few installed programs but I think that the speed is very similar.
I do not understand very well as Magneto uses the memory, you have 14,57MB of ROM (storage) to install programs but you cannot install them in the RAM.
You can see 24,35MB of RAM but I believe that Magneto uses all the RAM, only who deal with form different those 24.35 from the 100 rest that we cannot see.
Resco file explorer cannot accede to Windows or temp but microsoft file explorer if it can.
Parrot CK3000 works fine.
About backpack: battery and TV/monitor output works but CF slot dont works.
Is it still using the MS bluetooth stack ? Any improvement on bluetooth function ?
Yes, it is MS BT, but now it appears a new menu, "COM Ports"
IMPORTANT: I have upgrade to Magneto using himaupgradeut_197.exe and the original nk.nbf file (without patching)
It has worked to the first time and I have not had any error of identification.
Also I have left the Storage empty before beginning the update.
what does the "patch" do anyway?
where did you get this version can you upload your version? or share it?
I heard that it i impossible to downgrade to 2003se is that true?
what do you advice: try it or not try it until its officially released(It is beta right?)
thx
OMEGA_ReD said:
where did you get this version can you upload your version? or share it?
I heard that it i impossible to downgrade to 2003se is that true?
what do you advice: try it or not try it until its officially released(It is beta right?)
thx
Click to expand...
Click to collapse
should try, you can downgrade 2k3SE later if you don't like 2k5
witch version shuld i take?
and shuld i patch it or something like that to be able to downgrade it later?
thx m8!
ishtangli said:
what does the "patch" do anyway?
Click to expand...
Click to collapse
It changes the filename of file "DevAuth.exe" in a way that it can't be executed anymore before start.
This application checks the hardware in some way to determine if the device is allowed to use the software. Maybe some of you have a device that matches this "authentication".
What about BT voice call?
Hi
"Parrot CK3000 works fine."
Does it mean that you can originate a call from BT device? Voice dial or smth. like this?
Or it just receiving calls and you can hear and microphone is working?
Making of voce calling over BT is one reason for me to upgrade...
can you give met the link for witch i can download it?
I have used the file nk.nbf from Xda-developers ftp.
I have returned to wm2003SE with himaupgradeut_197.exe and nk.nbf file of version 2.06.
ParrotCK3000 works just as with 2,06 version and the change of the registry.
Magneto is very interesting but it specially has a great failure, when you install many programs the system becomes slower, particularly with programs like betaplayer.
If the problem of the RAM use and the access to CF slot were solved, it would be a great system.
2.06 works with AS 4.
More news:
Magneto can be reinstall again using himaupgradeut_197.exe in bootloader mode.
If we installed the programs in the SD and left frees the memory of the PDA, the system goes much more fast.
Some programs cannot be installed in the SD and they settle in the PDA. Some programs that work in wm2003 and wm2003se not admit magneto, aborts the installation.
SPB pocket plus does not settle because it says that it is being tried to install on ppc2000 and aborts the process.
hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !
Can anyone confirm or deny that either of the two programs work with the brand new rom?
They didn't with 3.27. There also is a newer version of Card Export out now.
Still not working for me on the official 3.35 ROM. I'd love to get this fixed. That was an essential feature for me and it sucks not having it.
Were you referring to Card Export II 3.08 or WM5torage?
both....
I was running Card Export 3.06, so when I saw your post I was hoping 3.08 would work. Installed it and still no love. This sucks.
Edit: I submitted a bug report at Softick's website. Here's hoping for a resolution
WM5torage 1.75 works with the new rom.
Not working for me. Did you do anything special? What ROM are you running? I'm on the official Sprint 3.35 release.
Also posted at PPCGeeks,
For those interested in Card Export/WM5torage:
I don't know about everyone else, but the ability to use my phone as a flash drive for transfering files is a huge advantage for me. Activesynce/WMDC blows, and is not installed on every computer. Since the update to 3.XX ROMs, neither of these programs has worked (at least for me). I've been in touch with Softick (makers of Card Export) and I think we will have a solution soon. I've run some debug programs for them and they have developed a working version. Not sure when the final release will be, but hopefully soon. I was amazed at how responsive their team was. The day after I emailed them, the developer was in contact with me. I ran some debug programs, and the next day he had a working test version for me to try. Really awesome to see them working that quickly to develop a fix. If I hear anything about the final release I'll post again. Just thought some people might want to know.
atomclock said:
WM5torage 1.75 works with the new rom.
Click to expand...
Click to collapse
is this inaccurate information??
i have both working on dcd 3.01 rom with the new 3.35 radio. I also discovered a way to unhide the extrom in dcd's kitchen and without the bug that happens when u follow this links suggestion : http://forum.xda-developers.com/show...ghlight=EXTRom
I have the phone recognize my extrom as a Mounted Volume or a harddrive for a lack of a better term. This means that since it is recognized as other than an extension of the primary, u could get files to treat it like a 2nd harddrive, maybe have a two OS's installed at 1 time. ( wm5 and then wm6 ) just boot into which 1 u want to use. or im working on trying to get the WM^ to treat it like a swap file for extra 10mb of memory. swap files r treated just like system memory by the Operating system.
any how u just have to make some reg changes and u are in business
bunvilla said:
i have both working on dcd 3.01 rom with the new 3.35 radio. I also discovered a way to unhide the extrom in dcd's kitchen and without the bug that happens when u follow this links suggestion : http://forum.xda-developers.com/show...ghlight=EXTRom
I have the phone recognize my extrom as a Mounted Volume or a harddrive for a lack of a better term. This means that since it is recognized as other than an extension of the primary, u could get files to treat it like a 2nd harddrive, maybe have a two OS's installed at 1 time. ( wm5 and then wm6 ) just boot into which 1 u want to use. or im working on trying to get the WM^ to treat it like a swap file for extra 10mb of memory. swap files r treated just like system memory by the Operating system.
any how u just have to make some reg changes and u are in business
Click to expand...
Click to collapse
would you care to further explain exactly how you got wm5torage and card export working on dcd's 3.01 rom with the new 3.35 radio? cause i jus tried both on the same rom and it's a no go for me, using the computer operating system windows XP. i have seen them work in linux.
well first i have the security and encryption off/ second, my version of both those progs are cracked, so they have been altered and third i thinks got something to do with the fact that i use QPST program which i have both 6700 and 6800 usb drivers on my phone. i use the 6700 usb drivers for that program and possibly thats what is making those programs work. U know because i havent had a problem with them i never thought about it./ but i couldnt but a 100 percent sure, but it would be my best guess. besides from my last post u can see that i have been messing with my extrom in which i use the 2 progs to help me with
how'd u get the 6700 usb drivers on your phone? u cooked it in using dcd's kitchen? where'd u get the 6700 drivers from? the apache kitchen??
card export II seemed to work w/ linux for me (did an "ls" to see the directory listing), However, when used with Server 2003 (my regular desktop that has activesync), it mounted itself, but when I went to see the drive, it was empty.
exactly the same for me. works in linux...and is visible but empty in windows. wonder how bunvilla got it to work. he's the only one so far that's been able to get them working.
says the drivers from the 6700 is on his 6800...sounds very likely to work that way but.....wonder how he got the drivers from the 6700??
Hopefully they will figure out something soon. This program is really helpful.
i want to make sure we are on the same page ok. When i use that program I only have access to my SD card. I cant access my phone folders. So when im at work and i want to save something to my sd card i turn on Card Export II 3.08 and then the little green light comes on and in a minute it shows up when i click "my computer" icon. But u know something ever since i changed the extrom to Mounted Volume ( no i didnt just rename the Extrom to Mounted Volume) it shows up too as a little 9mb removeable drive right below my Sd card.
so in the main directory there are 2 extra removable drives that shows up, and the only thing i can think of is my SDcard is formatted fat32.
Oh and by the way i didnt extract the 6700 usb drivers from a 6700 phone, i got them from a website and i rename my usb drvs for the 6800 and use the 6700 usb drvs and then switch when im done.
someone told me that i was doing it the hard way but it works for me. hope this helps some,
there are those times when stuff jus doesnt work for everyone else. sound like a lucky dude and congrats...cause NO ONE else can get it to work. not even the company who created the program. they're supposed to be working on a fix now.
well u know something else that i have that nobody else seems to have is the extrom , on my version of DCD' 3.01 everyone else seem to have issues with that too. at best they get extrom and extrom2 showing up when they use No2chem unlock extrom in the root directory of thier phone. I include a thumb shot of my root and u will see that i not only fixed that issue i also have the extrom show up as a removable drive and it changed from extrom to Mounted Volume and i didnt rename it that, it happened because of the reg edits i made and flashdrv.dll i used. im surprised that doesnt get your curiosity. I can both read and write to it, might even be able to add it to the pagepool. im working it right so i will let u know if i succeed .
WM5torage 1.8 hacked version working
Hey all. Found this on one of the kaiser forums.
I can verify that I have successfully used this cab on my sprint mogul with OLD stock rom 2.17
The steps required are as follows:
1.Install hacked cab below
http://forum.xda-developers.com/attachment.php?attachmentid=69221&d=1202300677
2.Soft Reset
3.Click yes to install card export and then OK to error messages
4.Open WM5torage and disable rndis
Note:According to thread, this will not work if you have ever installed card export on your system. Not sure why
Note 2: I am using 512microsd card with stock rom. I am about to reflash (for a change) and will repost later with my custom rom based on new 3.35
-Josh
bunvilla said:
well u know something else that i have that nobody else seems to have is the extrom , on my version of DCD' 3.01 everyone else seem to have issues with that too. at best they get extrom and extrom2 showing up when they use No2chem unlock extrom in the root directory of thier phone. I include a thumb shot of my root and u will see that i not only fixed that issue i also have the extrom show up as a removable drive and it changed from extrom to Mounted Volume and i didnt rename it that, it happened because of the reg edits i made and flashdrv.dll i used. im surprised that doesnt get your curiosity. I can both read and write to it, might even be able to add it to the pagepool. im working it right so i will let u know if i succeed .
Click to expand...
Click to collapse
it gets my curisoty as well. one thing i have to say is it appears your level of geekiness is definitely a step above mines. u're a smart guy man. would be nice if you could maybe dump that rom of yours for us and maybe create a bunvilla's rom based off dcd's 3.01 with wm5torage and a mountable extrom working. im almost certain it would get a substantial amount of users.
i bought 8gb SDHC card for testing drivers
already tested the attatched driver and had softreseted each time but had to hard reset in the end since my own 2gb card stopped being detected.
kamalneet said:
i bought 8gb SDHC card for testing drivers
already tested the attatched driver and had softreseted each time but had to hard reset in the end since my own 2gb card stopped being detected.
Click to expand...
Click to collapse
Unclear on what the conclusion was did it work ? just stopped recognizing your 2 gig
I think it is the same driver as this post
http://forum.xda-developers.com/showpost.php?p=3682752&postcount=5
yes this post and more from ipmart threads ,its strange i guess htc magician or wizard might have got a sdhc driver and wm6.1 so we should be given drivers too ,(not a petition though) someone with deeper knowledge of hardware might help all prophet users.i even used PE Explorer to open these dll files but couldn't understand them. the cabs have some registry settings i gues those are device specific. so we need a parallel device of same architecture and chips.
htc universal too had such problems solved in threads below
http://forum.xda-developers.com/showthread.php?t=317925
http://forum.xda-developers.com/showthread.php?t=317925
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"Dll"="omap850_sdhc.dll" exists in dudexx 6.5 roms from chj china may be again ask chinese help here.
various omap850_sdhc.dll exist in sizes 31kb 33 kb 36 kb 42kb point is which one to use.
translate this one http://www28.discuss.com.hk/archiver/?tid-1188186-page-14.html and a dopod 818 pro user here says he replaced 36kb file with 31 kb to solve sdhc problem of omap850_sdhc.dll even though 31kb file meant slow transfer rate. but he didn't post the file there.
there must be some dll repositary.
very important thread http://forum.xda-developers.com/showthread.php?t=376014 says hc in omap850_sdhc.dll means not high capacity but host controller but the actual SD card drivers are sdbus.dll and sdmemory.dll.
msdn http://msdn.microsoft.com/en-us/library/aa918430.aspx might help
kamalneet said:
yes this post and more from ipmart threads ,its strange i guess htc magician or wizard might have got a sdhc driver and wm6.1 so we should be given drivers too ,(not a petition though) someone with deeper knowledge of hardware might help all prophet users.i even used PE Explorer to open these dll files but couldn't understand them. the cabs have some registry settings i gues those are device specific. so we need a parallel device of same architecture and chips.
htc universal too had such problems solved in threads below
http://forum.xda-developers.com/showthread.php?t=317925
http://forum.xda-developers.com/showthread.php?t=317925
Click to expand...
Click to collapse
I think, Wizard has a similar problem too. If someday Wizard does support it. We could try to use their drivers
SDHC Support Prophet
One Mr Doodle has reported that he used 8GB SDHC with Shadow 2 TE Rom (plz see the relevant forum), but only 3.7 GB is detected by the device. For info, this may help. Anyone else tried this ?
check this one
hi my friend, I've found one driver, but I dont have any SDHC card so you can try it ;-) I've tryied it on my prophet with 4gb non-SDHC and this one ave disappeared, so WARNING you have to flash your system back when It's not working, but I think you can try it >>Link for this driver<<
me trying too, ....... sorry not working.
okay
yes, I guess that, keep searching
sdhc support prophet
probably ipl spl are incompatible to support sdhc.
anyone one to try this one
SDHC cab
and confirm of course.
varanusvincent said:
anyone one to try this one
SDHC cab
and confirm of course.
Click to expand...
Click to collapse
Transceng 4Gb SDHC not working.
Apacer 2Gb SD card still working.
Wi-fi not working...
R0ck4ever said:
Transceng 4Gb SDHC not working.
Apacer 2Gb SD card still working.
Wi-fi not working...
Click to expand...
Click to collapse
I dont know anymore. Long time ago. Cloudyfa give me other patch. And it wont work too. So maybe we should accept it, that our device can't support SDHC.
Jam sdhc is now supported
if JAm could support sdhc... the problem appears not to be related to hardware, but driver or firmware. with many devices driver has worked.
usmjan said:
if JAm could support sdhc... the problem appears not to be related to hardware, but driver or firmware. with many devices driver has worked.
Click to expand...
Click to collapse
jam uses xscale cpu while prophet uses omap 850 cpu although in theory this cpu supports sdhc but maybe not many prophet users are making noise about it ,thats why no one's bothered.
no this one is already in the zip i provided ,none till now works. keep up the hope.someday a prophet will come to give us our prophets solution.
anyone got some news about sdhc support ,been long time now?