Which one is better?
And why?
What are the advantage and disadvantage?
I would prefer Case + Screen protector
Body shield is good but not durable in the sense that peeling, sticking to hair, collecting dust etc. Moreover it'll make the screen "rubber" feeling, causing users having a hard time to slide on screen or using stylus.
Advantage of using Case + Screen protector :
Most important part : Screen is protected;
Whole phone is protected by case, and will absorb certain amount of impact from the phone e.g Dropped your phone on floor.
More durable except plastic casing.
Disadvantage:
Mobile will become larger and doesn't look that nice anymore
Please give me your views !
Related
Hi all,
Is there any good screen protector out there that doesn't collect fingerprints? Clear screen as well?
After lots of consideration I don't think I'll get the InvisibleShield nor Clear Coat screens. I just don't like their rubbery surface that makes the phone looks not classy anymore, especially the battery cover side.
I've opted for the Exim ones...I tried invisible sheild and whilst I can't deny it is a better all round protector it's an absolute "*****" to fit...exim is easy
Hello guy`s watch this: http://www.youtube.com/watch?v=KSlx8K89PZQ
I think Clear-Coat make the best protectors!
Hi guys,
can you recommend any screen protector to our beloved BN Nook Tablet?
I find bare screen less slippery for finger (compared to my phone with Steinheil Ultra Oleophobic clear screen protector (or previously used Brando Clear screen protector)) and some protection would be nice of course as well.
I'm looking for a screen protector, that would be
- clear (not glare reducing, matte)
- easily applicable (like Brando and similar - i.e. no glue, no liquids, static adhesion preferred)
- covering the whole screen (not just touch area)
- good value for the money
I don't think I need the most durable protector that exists, as I believe tablet is less exposed than mobile phone, I carry it in case etc.
Thanks!
I would get Caseen Glareshatters. I know you said no glare reducers, but it's still worth taking a look at.
They're cheaper than B&N's screen protectors, easy to apply (adhesive), and most important, no more oily, crusty residue from your fingers.
I was just curious that how many of you use your phone without any protection? I just started using like that and it feels really nice. The hyper-cut diamond finish gives a good grip to the hand.
I really like the feel of the phone in the hand, nicest I've had to hold, and is the only phone I ever use a case with...I just know if I leave it out the case there will be an expensive accident.
I use it without cover but with a glass screen protector
I don't use any glass or cover. I buy nice designed phones to feel the nice full metal unibody with a slim design.
If i would like to feel any cheap, fat plastic body i can buy a phone with a cheap plastic body.
I use xtremeskins UK sticker on top of back of my phone and plastic film screen protector as the one preinstalled has worn out. I have black carbon fibre version of the sticker with red accent on camera lens (which actually matches power button colour ) it looks cool and gives that extra grip.
Here is a link to website:
https://www.xtremeskins.co.uk/products/huawei-p10-skins?variant=36513341329
You can see for yourself how will your phone look like before you buy the actuall skin. The quality of a skin is amazing ,it's hardly add any bulk to the device and it does make it feel better in hand as well as add that extra wow factor when you pull out your phone from pocket.
I received my P10 on Thurs 07/12 and wanted to get a few opinions on whether i should remove the factory fitted screen protector prior to applying a glass screen protector or if i should just clean the factory fitted protector with the alcohol pads/swabs provided and stick the new glass screen protector on top?
Does the factory fitted protector reduce the clarity/sharpness of the screen in any way?
Would this be adequate:
https://www.amazon.co.uk/SUFUS-Prot...-4&keywords=huawei+p10+screen+protector+glass
Kind Regards
I'm using the original Huawei Flip cover and a full glass screen protector. As an electrician my hands aren't clean Everytime I grab my phone and sometimes I need to put some tools in the same pocket as the P10 is in.
But I hate the glass protector even it works very well. There's a black border around the whole protector and after a few month the protector doesn't fit perfectly anymore, it moved a bit to the left. The transparent part of the protector is a bit smaller than the screen and this is kind of annoying especially know it's moved.
I don't want to use a protector, but I think I need one. I don't want an ugly scratch on the screen.
Hi,
I removed the factory installed film in the screen and replaced it with a matte IQ Shield protector. It's great. It's not glass, but it has no reflections. Like most laptops.
So the quest for a good full body tempered glass screen protector has failed. I have decided to go for a high quality film protector. I don't really care about the strength of the protector, as long as it protects from scratches. What is the most comparable to a glass screen protector in clarity, texture, and smoothness? Right now, the wet application films seem to be the best, such as IQ Shield LiQuidSkin.
Anybody have anymore recommendations/reviews?
Edit: Water/oil resistance would be nice as well...
I've used Skinomi protectors for a while now, really good products and not that expensive.
I used both IQ Shield and ArmorSuit MilitaryShield, both are very good. The only difference is the shape, ArmorSuit doesnt go around home button and speaker - that makes it easier to apply, plus those places get damaged easier on IQ Shield. Quality wise, they are both great.
Be sure to get the right IQ shield version, there are 2 for s7 flat, full coverage, and "case friendly" with cuts at the corners. Those corners (upper left in my case) were first who got dusty beneath, so i had to replace it.
Maybe ArmorSuit is wiser choice overall, since it doesnt cover 100% of the glass so its case friendly without corner cutouts (it does cover the whole screen).
lakicamm said:
I used both IQ Shield and ArmorSuit MilitaryShield, both are very good. The only difference is the shape, ArmorSuit doesnt go around home button and speaker - that makes it easier to apply, plus those places get damaged easier on IQ Shield. Quality wise, they are both great.
Be sure to get the right IQ shield version, there are 2 for s7 flat, full coverage, and "case friendly" with cuts at the corners. Those corners (upper left in my case) were first who got dusty beneath, so i had to replace it.
Maybe ArmorSuit is wiser choice overall, since it doesnt cover 100% of the glass so its case friendly without corner cutouts (it does cover the whole screen).
Click to expand...
Click to collapse
How is the feel of the protectors? I heard they are kind of rubbery.
Actually they are not - they feel glassy. Regular protectors feel more rubbery.
I cant find a good case for ROG 3 on flipkart of Amazon. Which case are you guys using? where did you buy it from??
I am using Lighting Armor case as I need to use the air trigger. If you do not care for the function of air triggers (dual & slide), can get IMAK case from aliexpress.
I'm also using the lighting armour , I like it ok it drains power but I still like it
I am using the average tpu case that is available for rog 3, i had to make cut out for the side mounted type c ports though
I'm using this: https://www.aliexpress.com/item/4001345047036.html?spm=a2g0s.9042311.0.0.5d6e4c4d4DwYCq
It's not perfect, but provides enough all around protection, the cutouts are in place.
The included tempered glass screen protector is of good quality, but the black border covers a few pixels on the sides.
It's pretty cheap, I can recommend buying it to protect your ROG Phone 3 - as I said, it's not perfect, but good enough.
Using this one with a tempered glass in the front and a silicon film in the back
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Used to use the lighting armor case until the slippery uncovered aluminium side caused me to drop the phone yesterday, now the phone has a dent on the top right corner of the frame. Lighting armor has the best look of all the cases out there. Now using Zshow case which should prevent it from hitting the screen flat down if I ever drop it again. I'm lucky the phone didn't fall face down with the lighting armor case which would have guaranteed a cracked screen.
I have the imak tpu case too but it cause the tempered glass to lift.
Besides the tempered glass being lifted issue, what's your experience/ feedback regarding your IMAK TPU case (is it with extra corner protection)?
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
I'm getting the hydrogel film screen protectors - Hoping that screen lift is not an issue.....
What's your experience or opinion regarding the general damage/ drop protection with this case?
Quality, overall fitting & feel?
It will protect if dropping on the corners as well as face down. However dropping on the back might be a problem because the camera lens are protuting out (although the case cover the camera lens). Placing the phone on the table will also result in wobbly phone when using.
---------- Post added at 06:15 AM ---------- Previous post was at 06:13 AM ----------
Quality, would say it is better than those generic cheap tpu case (which has worse fit than imak), feel wise, it is slippery on the back.
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
It covers the side? The picture on amazon looks like it is an open side design. I don't see slapping that case will provide a good grip.
lornranger said:
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
Click to expand...
Click to collapse
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Davisk8 said:
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Click to expand...
Click to collapse
I am using Asus Original Screen Protector without antibacterial coating. The antibacterial protector is not available in my country. Great protector, no blocking of edge unlike the cheap china protector which has thick black borders and block the edges of the display.
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
Thanks for this, I did think about getting this over.
I'm using the magnetic flip case which is great, but no front lip so don't drop the thing like I did, broke my display as the screen protector didn't quite cover all of it and a tiny stone hit the outer edge.
Not the end though as I've bought another, and will get it repaired under insurance consider it a lesson learned.
￡2.32 23%OFF | Safety protective Glass for Asus Rog Phone 3 ZS661KS Oleophobic Screen Protector For ROG Phone 3 Strix Tempered Glass Film
https://a.aliexpress.com/_B0aeTT
This was with the rog case which in all honesty shouldn't come with it.
This is the protector, don't bother with it, I've another coming that has smooth edges, looks decent so will see.
Turns out the one I've ordered might be the same Asus sells.
￡1.59 | For Asus ROG Phone 3 Phone3 ZS661KS / Strix 6.59" 21D 9D Full Glue Cover Toughened Tempered Glass Film Screen Protector Guard
https://a.aliexpress.com/_B0iH9b
the lighting case but I installed a diy wireless charger because I have so many already laying around
[/COLOR]
elmor0 said:
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Click to expand...
Click to collapse
FEEDBACK
Took about 5 weeks to arrive (from China).
This IMAK case is good build quality and fit over all, could have been a bit more snug - the extra corner padding does not make it look slick, and I am not sure if it is worth it on balance.
There is a 2 mm lip all around the front panel to help with screen protection.
Cut-outs are spot on - including for air-triggers/ 3 mics/ heat vent/ side USB ports. No cut-out for SIM-tray though but it's better this way.
Camera module is fairly well protected.
No issues with air-trigger related squeeze gestures.
The Hydrogel clear gel screen protector had a ?extra notch cut-out just left of the front camera (?? why) but otherwise the rest of the dimensions were spot on. It came as a set of x2 in one pack, which was a nice surprise. Included a helpful set of instructions/ link to video.
I preferred it to be short by about 1 mm all around the edges to minimise the risk of "lift" when the case is compressed in pockets/ when using the squeeze gestures etc.
The touch feel is smooth and has a good response. Visibility through this screen film is fine; no glare issues. I prefer these type of gel screen protectors to glass.
Has anyone come across a case that doesn't need to be removed when connecting to the accessories (eg Twinview, Mobile Desktop Dock)?