hi friends
I have a HREM200
when i tried to update that, it restarts at 1%
1st i connected to the PC at Bootloader mode
then i started the application (RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship)
Also tried Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship
the error code is ERROR 260
please help me friends
thanks
First do this:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
Then this:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
big thanks to you....
me flashed my HREM200.....
Related
Hi All,
Yes I searched, could not find a helpful post that I could understand (unfortunately a lot of not-so-good english on these forums!).
I used the file 'windowsmobile2003se.exe' here;
http://forum.xda-developers.com/showthread.php?t=230279
It started loading fine, then when it came up with the progress bar to start updating, my device rebooted and is now stuck in bootloader.
When I try himaupgradeut.exe, it gives me a ERROR 101: Connection Error. USB is disabled in ActiveSync and I can see the device as "Microsoft USB Sync".
The USB still works (I can use mtty and xda2unlock in Windows XP and they both work fine). Is the device still recoverable?
I have hard reset (Power + Reset), removed and re-inserted battery and tried a normal reset, none of these work.
Can I please have some step-by-step instructions on how to recover the phone? The bootloader version is 1.06
Thanks.
can you get some pics?
Have you tryed leaving the battery out for 1 day or over night. Because that fixed some problems for me.
try it
flyboy
Yeah I've left the battery out overnight (about 12 hours to make sure the backup battery ran flat). It's still stuck on the boatloader.
It's just got the normal bootloader screen (Serial up top and 1.06 down the bottom) and this changes to USB when in the cradle, so the device seems to be fine.
Any ideas?
Solution found!
I HAVE FOUND A SOLUTION FOR RECOVERING FROM BOOTLOADER!
Full props and thanks go to utak3r of buzzdev.net
Please go to this thread.
http://buzzdev.net/viewtopic.php?f=8&t=36437&start=0
MODS: Please sticky this. Please.
Hi All,
I have made a script that people can use to easily flash their Himalaya without performing all the above steps manually.
My extreme and eternal thanks go to utak3r (from BuzzDev), xda-developers.com and buzzdev.net for building such great communities and for providing so much help and information (even if it is a little hard to follow sometimes!).
You can download it from;
http://members.iinet.net.au/~nomicakes/MakeSDBoot.zip
http://www.clonnyserver.com/uploads/tools/himalaya/MakeSDBoot.zip
The zip file contains the script and the tools neccesary to do this.
As above, if you aren't familar with flashing devices and the possible outcomes, DO NOT USE THIS TOOL.
Hi there,
Yesterday I tried to upgrade my Qtek 2020 to the last rom available but something went wrong and now my PPC only shows the bootloader screen.
After hours of researching on Google I found this forum and this topic. I tried to do what is in utak3r tutorial but I can't connect to my PPC using mtty (usb port can't open) and I don't know why. :\
When I try himaupgradeut.exe, it gives me a ERROR 101: Connection Error too...
And finally when I run this script made by Clontarf it fails on the last step on writing to the SD card. It gives me a Error - Access Denied.
I don't know how to solve this. Would you please help me?
Problem solved!
hi guys,
I tried the lasers unlock method with the guide of lukas, but unfortunately without any succes. i got always the error " adb server didn´t ACK".
many adb.exe´s appeared in the task manager, could that be the problem? I also tried to kill them, but they kept appearing and appearing and after a while the batch file finished unsuccessfully
So I tried the unlock feature of the flashtool, but somehow my device isn´t being recognized in flash mode.
the message " waiting for device" doesn´t disappear after I have plugged in my x10 in flash mode.
my setup:
wb 6s 2.3.3
stock kernel
windows xp 32 bit
thank you guys in advance.
I found a solution on my own :http://forum.xda-developers.com/showpost.php?p=17437673&postcount=179
I´m a little bit emberrased now, I should´ve searched more properly.
wish me look
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
P.S
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
HELP ME PLEASE :crying:
Hi to all! I send this because i have a problem with my Infinix Zero 5.
PROBLEM: After a bad update my device was bootlooped so i downloaded the firmware from Infinix Oficial Site and proceed to flash the ROM with SP Flash Tools he problem was in middle of process when a error appears and the program crashed.
After that I restarted SP Flash Tools and proceed to try again to flash but an error appeared “ STATUS_INVALID_GPT (0xC0030008)” i tried several times but the same error appears, tried with Firmware Update “PMT Error appears” so my device was hard bricked and i can´t use again, my PC doesn,t detect now, only charge (the red light appears) and is all. No screen, PC Detection is fast because after a second the USB disconnect sound appears
if you know who to fix this please help me, im desesperated.
Thanks for all.
ps. i put a link to a video below, recorded by me about the error for reference
STATUS_INVALID_GPT (0xC0030008) pls if you have gotten the solution. pls email me on [email protected] / thanks
theaddus said:
[email protected]
Click to expand...
Click to collapse
give me the soulotoin pleas
Hello my name is pedro and i am from mexico, my problem is the following i have a moto one macro (xt2016-2) and try to download the android version from 10 to 9 but when the cell phone turned on it got the starts up failed error , I followed this guide https://forum.xda-developers.com/t/...your-bricked-motorola-moto-one-macro.4145191/ but when opening the blankflash.bat it stays on this screen
Waiting for comport cable insert
Please insert comport
the script does not detect my cell phone but the computer does, reinstall the drivers and it is still the same, when flashing a rom it does it well but it keeps giving me starts up failed
Could someone please tell me if I am doing something wrong? first of all, Thanks.