Related
Hi, I already read a lot in the forum and the wiki, but as my first try to update my rom went terribly wrong I tend to ask some pros for help
I got me a used XDA1, it worked fine and was a german O2 Model. Then I got the last Update from O2 (3.19) and updated it with success. Then I wanted to unlock it with your Special Edition Rom, downloaded it and tried to apply it just like the O2 one via active sync and progam A. Result was, that my xda got stuck, now I can only see the empty transfer bar on the xda and can´t connect to the xda with active sync anymore. Both resets won´t help to bring the xda back to live the silly bar comes back every time... I can still get into the bootloader, though. As far as I understand I can still get the thing working again with a SD-Card and a rom on it? Can someone pleasepleaseplease tell me which card to buy (I don´t have one jet...) and how to get a onto this card and where I can get this rom? I still have the Files this O2 exe unzipped onto my disk and theres a nice 31MB NK.nbf in the Program/German folder. I already found the description how to flash from a SD-card with the bootloader, I just don´t know where to find the right rom and how to put it on a card... And maybemaybe, could someone tell me the right way to get this O2 xda working with a D1 card without getting it stuck again???
Thanks a lot to all your answers, I really need this thing to work again, and still ask myself how I could try to update the rom without reading enough, seems I will cry into my pillow till it works again cause it´s the only cell I got at the moment
Download xdatools and install, choose the nbf file as source and your card reader/writer as destination, choose this from the drop down menu at the bottom. You will need a 64 meg minimum sd card, a card reader/writer, xdatools and the nbf file. Once xdatools has programmed the sd card you insert into xda, push reset while holding power, when prompted push the action key which is the centre of the 4 way rocker switch. You will find many roms in the the kitchen that is kindly run my lumpistefan. Make sure to choose sd card flashing at base of screen before cooking rom. Here is the link for the rom kitchen.
http://lumpistefan.dyndns.org/
thanks a lot for the fast answer I got all the progs and the original 3.19 german o2 rom from rom kitchen. Now I´ll just have to get me a SD-Card... One more little question. I can´t turn the XDA off with the powerswitch and after reseting it also turns on automatically. I´ll have to wait till Monday to buy a SD-Card, so is there a way to get the thing off although it is still in transfermode or will I have to leave it on and in the cradle?
If you want it switched off completely, just poke once into the hole under the headphone socket, this will completely disconnect the battery, when you want it back on just push once again. Always do that procedure after flashing a rom also, push once then leave for on eminute, push once more to switch back on with new rom and noot sequence.
works fine, thanks
Hi,
I have an XDA O2 (Wallaby) which I got from a friend of mine who used it without a problem in its life and now I am stuck with a flashing O2 XDA.
Let me try to best describe my problem.
I had copied some of my excel files onto the O2 and then I had a distinct feeling that it had gotten to be much much slower.I am not too sure if this is the cause.
I was not using it as a phone but one day I slipped in my SIM card so as to surf the net and it just would not connect via GPRS and after that it had become very slow hanging every once in a while so I did a soft reset but it still was slow and the GPRS would not connect neither did it detect my phone service provider.I used to surf prevously through GPRS without any problems.
Then I did a hard reset and it just wouldnt work after that it would start with the blue O2 screen and begin to flash on and off with a blank screen with a small keyboard icon in the lower right hand corner presumably the affected excel file....I think my XDA has a virus now please help me out from here.
I tried doing a hard rest and I depressed the reset button on the RHS side that's it(smaller hole bigger one for soft reset) Once I press down with the smaller end of the stylus I press it again then the blue screen with the O2 logo comes to life it stays on for sometime and then a "tink" noise comes and the busy sign comes as if it has just opened an application ..a blue small band on the top most corner and a small keyboard icon on the lower rhs hand of the screen then the screen begins to flash ten seconds apart for quite some time...infact that all it does before shutting down and restarting all over again.
Is there any other way to do a hard reset.What is the right way?? as on one of the forums said that I should depress the power button and the soft reset button at the same time for about 5 sec I tried the hard and something called the WALLABY Bootloader V5.15 came on the screen with the message 'WAIT' after a couple of nail biting seconds I got an error saying GSM ERROR the screen was a clourful white red green and blue strips....what happened??
Then I proceeded to depress the soft reset button it restarted with the usual error of a program being opened and the screen flashing..
Hope to get a reply from this forum.
Take care
Ciao
Al
flashing screen
almaal have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
Hi,
1st off thanks for your reply....
I have downloaded Programme A to upgrade my rom but cant seem to get it loaded onto the SD card. I unzipped osimage.exe and tried to store it from my PC to SD card but cant seem to do it....furthermore I was advised by friends out here not to be a braveheart and venture to kill my XDA but still I'd like to try...you see I'm not to conservant with the software bit and I'm only a end user...
Could you give me a step by step guidance to get the software loaded to the SD card via a card reader and then flashing the rom..
Hope to hear from you....
Alvin
flashing from sd card
Firstly make sure u have winzip winrar or some other compression software on the computer then right click on the programme A exe file and click open with whatever compression program u have i use winrar so i will say open with winrar. You now need to extract all files into a folder.
Once you have done that open up OSimagetool and on source browse for the folder u just extracted the programme A to and look for nk.nbf,you will need to tell it to look for nbf files and not nb1 files , which is the default and select it,it is in the english folder. In the destination u need to select your sd card which should be in a card reader as u cant program it directly to the XDA or via the memory card, once you have done this click copy. when that is finished you need to take the card and place it in the xda and do a cold reset . A screen will appear saying SD Download click the action key on the pad to commence flashing. after a few minutes it will inform you that it has finished. remove the sd card and Cold boot again then once the wallaby has rebooted back to your bootloader screen soft reset it,ignore the gsm error now cross your fingers while you wait to see if it reboots. If it reboots ok set up activesync again and run the radio upgrade. By the Way any info on the sd card should be saved before attempting this as it will be overwritten by the osimage tool. Also only the xda can read the card , the pc will say it needs formatting Good luck
Any Luck
Did you have any luck reflashing with a new rom almaal?
I have followed the procedure. The system rebooted and I got the GSM error which I ignored and continued the process. The system rebooted properly i.e I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow. And although the backlight is switched to on it the device keeps on flashing. What do I do now?
almaal said:
I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow.
Click to expand...
Click to collapse
That´s quite normal on a device with the gsm error.....
Stefan
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
Not charging I think
Hi I dont know what to make of it but now my wallaby came to life with the rom that I flashed but it seems to have gone crazy. Let me best try and explain.
1) The green charge light does not come on when I put it onto the cradle or plug it directly for a charge.
2) It does not make any sound, no beeps no nothing....but when an mp3 is put on it plays
3)The back light does not come on which is enabled but does not work I have to work with a dark screen...is there a brightness control which can be adjusted...its like its on power save mode or something..
Now its back flashing the O2 screen again its become terribly slow and unstable and I have to do a constant reset. How do I know which is my ROM to flash, I've flashed the R.30.07 ENG Rogers (4700 kB available) from http://www.romkitchen.de/WM2003/form.php.
I somehow feel that my O2 is not charging
Can you make any sense of this ..
Alvin
Hi
And another thing is that I trird copying the radio upgrade over to the card and then clicking on rsupgrade.exe. The upgrade fails at 1% giving an error as follows:
Flash Failed!
Press ok to restart your device.
What could be the problem? and how can I fix it?
Thanks
See http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Regards,
Neil.
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
No Charge no back light
Hi,
I have flkashed my rom but I cant get the RSU upgrade done.Now I have a running O2 with no backlight and it does not charge....where do I go from here....please reply my life is a meess without my O2 is it time for a change...howz the O2 mini or the imate JAmin fed up with this GSM error.
Alvin
hey guys,
for the fun i tried to run Eclair android on my niki, with in my mind it would not work.
well i did follow a tutorial which was meant for Kaiser/Vogue/Polaris.
then it just booted in Eclair, i made some pictures for you guys to take a look at.
Ill also make a vid, with booting in it, and some things to show.
enjoy!
sorry for my bad english, im from the netherlands
PICTURES
This are some pictures i made from Android Eclair on the HTC Touch-Dual *NIKI*
http://img175.imageshack.us/gal.php?g=img0741.jpg
VIDEO(S)
Here i will post all video's made by me, or people from xda-developers.
VID 1(made by me, do not mind my voice)
http://www.youtube.com/watch?v=z0u1ejw6AF8
DOWNLOADS
Here i will post all downloads you will need to run android eclair on your HTC Touch-Dual *NIKI*
SD-Card rips
Fast tutorial for installing SD-Card rips
1. Download the SD-Card rip package you want from this page.
2. Extract it to your desktop.
3. Now select all the folders, and right-click Copy.
4. Connect your HTC Touch-Dual *NIKI* to your computer.
5. Go to your explorer(right-click on start)
6. Go to your device, and select in there the SD-Card
7. Now copy all the just selected files to your SD-Card, this can take up to 20 minutes.
8. Now the copy process is finished, take your HTC Touch-Dual *NIKI* and go to the file explorer.
9. Go to your SD-Card, and run Haret.exe
10. Now just wait till android is started up.
SD-Card rip polymod 2.1 alpha 4(OLD)
This is a rip of my SD-Card, i do not know if it works on your HTC Touch-Duals *NIKIS*
But you can always try
http://www.mediafire.com/?gouyxj5igcy
SD-Card rip Android Eclair 2.1 Vogue(NEW)
This is a rip of my SD-Card, i do not know if it works on your HTC Touch-Duals*NIKIS*
http://www.mediafire.com/?mt1wblydryd
SD-Card rip Myn’s Warm Donut(NEWEST)
Here i will post the fastest android release that i found untill now.
This is a SD-Card rip which was installed on a HTC Kaiser, because the NIKI does not have as many keys as the Kaiser, i could not start the installation on my HTC Touch-Dual *NIKI*.
So there only will be a SD-Card rip untill now.
Here is the download link:
http://www.mediafire.com/?mmdihjjez1o
Android install folders
Fast tutorial for installing Install folders
1. Download the Install folder you want from this page.
2. Extract it to your desktop.
3. Now select all the folders, and right-click Copy.
4. Connect your HTC Touch-Dual *NIKI* to your computer.
5. Go to your explorer.(right-click on start)
6. Go to your device, and select in there the SD-Card.
7. Now copy all the just selected files to your SD-Card, this can take up to 20 minutes.
8. Now the copy process is finished, take your HTC Touch-Dual *NIKI* and go to the file explorer.
9. Go to your SD-Card, and run Haret.exe
10. Now you have to watch your screen very careful, when the text “Hold dpad center to launch installer” appears, press the middle button.
11. Now a install menu will come up, select the 1st option, Install system
12. Now there will pop-up a messenge “This will wipe your existing system!” just select YES, this will not remove your windows mobile installation, it should delete a previous android installation, which is not installed yet..
13. Now there will pop-up another messenger “Would you like to clear data too?(Suggested)” select YES again.
14. Now android will be installed on your SD-Card, when it is done, you will return to the install menu, now just select Quit and it will boot in android.
rip polymod 2.1 alpha 4 Install folder(OLD)
This is the Install folder of polymod 2.1 alpha 4.
This is the slowest android i runned untill now, i do not recommand it.
Download link:
http://www.mediafire.com/?zznwujznouz
Android Eclair 2.1 Vogue Install folder(NEW)
This is the installation folder.
Download link:
http://www.mediafire.com/?nxniyktlkuu
Myn’s Warm Donut Install folder(NEWEST)
Please take a look at the SD-Card rip.
Good news
I would to try it out. Can you upload your android package here?
yes, nike users can use the package for the vogue. the problem for me was that nike could not wake up after sleeping because we have different key mapping than vogue or kaiser. how is ur battery life?
im on school right now.
when im home, ill upload a complete rip of my SD card.
what i've done is the following:
i downloaded the pack for the HTC kaiser/vogue etc.
then i used the default.txt from a android made for the htc niki.
the only thing i changed in there was change "Zimage" to "Zimage-monsha"
then i could just install the andoid on my sd card and run it.
i don't know about the battery life yet, i didn't test it very well yet.
it's pretty laggy though so it will need some very good improvements.
Did your data work? I also got eclaire runniung on nike on ext2 partition using the methods from the vogue forums, but I noticed some issues:
- No data
- Slow
- I Tried to patch the new 3d driver stuff into the kernel. Afterwards i had accellerated graphics without textures (live wallpapers). But i have the same issue on some combinations of older builds, kernels and rootfs.
I also tried other builds from ext2 (all without rootfs, no working data on any of them , but it seems like the old versions with rootfs work better (-> data works)
i did not test it anymore.
i was at school.
rightnow im at home, so ill make a rip of my sd card, this is not formatted in ext2 or something.
i just deleted all the data on the sd card, and i just installed it.
it will take a while to upload, cause its pretty big.
right now im going to upload the .rar file.
it is 115 MB big, so make sure your sd-card is bigger than 512 MB
ritzky said:
yes, nike users can use the package for the vogue. the problem for me was that nike could not wake up after sleeping because we have different key mapping than vogue or kaiser. how is ur battery life?
Click to expand...
Click to collapse
i tryed with sleepmode on 0, and it just worken, also on 1 it just worked.
i do not know how to see if full sleep is working, but it could be also working on the HTC Touch-Dual *NIKI*
set pm.sleep_mode=4. Data don´t work. Data don´t work on Nike with more new Android OS like donuts(1.6) or eclair(2.1) only in olders like android 1.5. Nike handsets lacks of android developers. We have no luck like Polaris/Vogue/Kaiser/Diamond users
i know, but i edited the default.txt a lil, by changing the resolution, i had less lagg, but it does not show the whole screen :S
even when im using the resolution of the screen :X
if u set the sleepmode to 0, can u wake the device? i never been able to. could u post just your default.txt here? anyway, data is working for me.
Running
I tried this, i'ts running, here's my report:
1. I cannot make a call (incoming or outcome).
2. I cannot send the SMS
but the operators carries found..
ritzky said:
if u set the sleepmode to 0, can u wake the device? i never been able to. could u post just your default.txt here? anyway, data is working for me.
Click to expand...
Click to collapse
yes it awakes then.
and i did not test it with sim yet, the first thing i wanted to do is a good fast stable android build.
i found one, only one problem:
you cannot install it on your niki, i have to take the data.img and system.img from a HTC Kaiser(which uses my dad)
i already got a rip, right now im going to test if that works.
then i will delete all settings in there, and upload it here, one thing; it is REALLY fast!!
podelz said:
I tried this, i'ts running, here's my report:
1. I cannot make a call (incoming or outcome).
2. I cannot send the SMS
but the operators carries found..
Click to expand...
Click to collapse
I had the same problem first, then reboot the phone and it works great !
My only problem is the qwerty keyboard layout ... mine is azerty
great port thanks !
ok, thx man!
i'm in France right now, so i can't update my thread, when i'm back, i'll look for some newer versions and upload some other SD-Card rips, and Install folders
mrassol said:
I had the same problem first, then reboot the phone and it works great !
My only problem is the qwerty keyboard layout ... mine is azerty
great port thanks !
Click to expand...
Click to collapse
Hi there,
Tried it here in Germany. Boots fine, but no Data. Carrier shows up and after creating a new APN, The Modem APP shows active Connection, IP Address and so on. But for some Reason, there's no Flow of Data...
Any Ideas ?
Greetz lagloose
(BTW: Phone seems to work normal...)
lagloose said:
Hi there,
Tried it here in Germany. Boots fine, but no Data. Carrier shows up and after creating a new APN, The Modem APP shows active Connection, IP Address and so on. But for some Reason, there's no Flow of Data...
Any Ideas ?
Greetz lagloose
(BTW: Phone seems to work normal...)
Click to expand...
Click to collapse
Data don´t work on Nike with the more newest android builts. We lack developers
I noticed that data works on eclair and donut, but the connection drops after a (very) short time. Sometimes I was able to load one or two webpages after a fresh boot until the connection went down (20Key Nike, O2 Germany). I also got google sync once working for a few seconds (enough to fetch mail).
So it seems to be more a stability issue than a general lack of data connection.
Does anyone have developent experience with android? I am now compiling the eclair build with the latest libraries from the vogue andoid git tree, but if someone already knows were the data problem is or what it could be i could find a faster solution, any in the development would be great.
mblaster said:
I noticed that data works on eclair and donut, but the connection drops after a (very) short time. Sometimes I was able to load one or two webpages after a fresh boot until the connection went down (20Key Nike, O2 Germany). I also got google sync once working for a few seconds (enough to fetch mail).
So it seems to be more a stability issue than a general lack of data connection.
Click to expand...
Click to collapse
It´s true. It is like get freezed. If you go to modem and you want to disconnect it say disconnected but you can see still the icon and sometimes the up arrow. After this if you want to turn off the hanset you can´t and its needed a soft reset. So after get connect and with a luck to browse two webpages it get freezed
just curious. with the sd card haret method, i got myns warm donut working on mine so far (just cant figure out all of the button mapping).
i have ryans low mem 23518 6.5 installed in the background, but wouldn't it be so nice to NAND android? i think the only thing stopping it is a working NBH file.
Asking the same question.
Care to post a step-by-step for how you got the vogue's donut to work? Would be much appreciated.
Thanks in advance.
basically, from myns warm donut topic
http://forum.xda-developers.com/showthread.php?t=619980
-i downloaded the sqsh file folder
-formatted my sd card in my computer with a program called SDformatter 2.0
-i went here http://magister.ipsys.net/?page_id=69&lang=en
i downloaded the file from here and donwloaded the file at the bottom of the page. i ONLY used the default.txt file
-extract myns sqsh folder, and it should give you an android folder with a bunch of stuff on it
-put the android folder on your sd card
-put the default mogul txt file into the android folder and overwrite the existing one in there
-run haret and wait like 5 mins
the android sign while loading is cut across the screen weird, and i cant figure out all of the buttons yet
hey, thanks for the info staticchmbr, but im having a slight problem, when i get into the install screen it asks if you want to install when you press the center button but i cant figure out for the life of me how to get the answer over to no.. its making me feel stupid >.<
EDIT: nevermind, i got it like 20 seconds after i posted this...
yea, just make sure that you download the classic sqsh folder, not the norootfs ones. this has worked with multiple android builds.
im having troubles with the market though,. i can go in and start downloading, but the progress bar doesnt move.
ALSO, on myns, once the screen locks, i cant unlock it. i guess the buttons are mapped differently on that. i have used some kaiser/vogue builds as well
im honestly suprised no one has gone through and mapped the keys for the titan, i dont know if its that simple (i honestly doubt it is) to make it fully compatable with the titan, or im my case, mogul (PPC6800, same exact phone as the titan)
does anyone know if this build will enable wifi or bluetooth for the sprint mogul? Thanks.
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.