Hi,
I have a big problem.
Sorry, but i already search in this forum but no success.
I upgraded a ATH100 with a SPL 3.65 ATH400 Rom
Now, i try to back to ATH100 but i cant. With PC and RomUtility, i get MODEL ID 244 error.
With SDCard i get 00058002 error while Loading...
Anybody can help me.?
Thanks
athena400back to 100
i was in too, now if you cant downgrade yet,sent me an Email ,to [email protected] and sending to me alot of pic from thet and information about your rom.
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
I have same problem. Please anybody can help me?
Try out This>>>>>
ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
Download: Mac1.zip mtty_0513_Test.zip
But where atachment ?
For me....WORK...THANKS again CMONEX
but i not do to repair wifi i want to flash my wm........
help me please ,,,
i make hard spl for athe400 in athe100
"ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time"
as it says it fixes corrupt modelid
It is worth a try
ERROR[244] :Invalid model ID ATHE100
Hi,where do i find the MAC adress for my ATHE100 as i cannot get forward from the bootloader?I am using SPL-v1.20.Olipro.Thanks to any1.
Yes, where is the MAC ADDR
As above, would be grateful if anyone would help us find where the MAC address and thanks for this thread this is the bane of most new owners and newbies. Cheers!!
Mac addr found, but......
Yes found the MAC address - it's under the battery cover, but having gone thru the whole process I got the following 3 errors at the end-
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thanx buddies!
3 ERROR Messages!!!
Hi Lakeman, could you help decipher these mysterious errors which I had after I have gone through the process twice
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thank you!
invalid Command
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
here you go >> http://xacsx.de
german ameo-site, roms, repair, and other helpful things
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
if you get notice
-> ERROR [242] : INVALID LANGUAGE
-> ERROR [244] : INVALID MODEL ID
-> ERROR [294] : INVALID VENDER ID
-> ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
stuck in bootloader. Help needed.
I have a HTC Athena x7500.
accidentally upgraded my htc x7500 WITH SSPL-Manual-x7510.zip of HTC X7510
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10.0000
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I have explored ruu_signeg.nbh in spanish rom with notepad jai entered the signer spl 1.10 I know if is sure or not
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
with mtty : task 32 level=ff
is what I can fix this problem with mtty
so if possible please guide me
I board on my pda (cid locked)on the Spanish language HTC_304
sorry for my bad Englis
thank you in advance
My email: [email protected]
http://forum.xda-developers.com/showpost.php?p=5205291&postcount=8
I think there is another thread somewhere about this but you could try the incorrect ID fix in the post above
and try to do the lower SPL
Related
He Guys,
Just my luck I have bought an HTC Tytn with the original Dutch rom and sim unlocked second hand.
I wanted to put a new Dutch rom from HTC on it but I keep on getting the ERROR [244] : INVALID MODEL ID but what I don`t understand is I have used the original Dutch rom from HTC. So I checked the device information and under the tab identity it says;
Model No.: H
Platform: PocketPC
IMEI: xxxxxxxxxxxxxxxxxxx
Shouldn’t the Model No. be HERM200?
Has anyone any suggestions in how I can solve this problem so I can flash any rom I wish.
I have tried al the cid unlock programs I could find and in bootloader it says;
H
IPL-1.01
H
SPL-1.40.Olipro
Thanks in advanced.
Use RAR to unpack the Original Dutch ROM.
Take the NBH file that you get when you unpack the ROM.
Put it in a folder with CUSTOM_RUU from Olipro.
Run CUSTOM_RUU and it will load up the ROM from the NBH file, bypassing the CID check. Should work
Thanks for the reply,
I have tried what you suggested but I still get ERROR [244] : INVALID MODEL ID I have also read these posts http://forum.xda-developers.com/showthread.php?t=322231&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=322119&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=309707&highlight=CUSTOM_RUU+from+Olipro and tried these suggestions but every time I get the error message. The radio update process was the same for me it will go to 7% and then give the message ERROR [244] : INVALID MODEL ID.
I have also tried the HTC_Hermes_SIM_CID_Unlock_v3a and Hard-SPL-V7 but still get the error message.
I hope I’m doing something wrong if not then I hope you have a new suggestion.
Thanks in advance.
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Junner2003 said:
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Click to expand...
Click to collapse
Did you read first post?
VivaErBetis said:
Did you read first post?
Click to expand...
Click to collapse
Ups, missed the bottom - thought it is the signature already! Sorry, haven't had my coffee yet!
Well, looks like the device is CID unlocked!
How about trying to flash an entire cooked ROM?
i would suggest the following:
flash a cooked rom (any)
see if that makes any difference to your model id
then try and flash the native dutch rom
good luck
Hi Guys,
As you suggested I tried a cooked rom the Hermes_WM6_vanilla still get the same error message when I put my device manually in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
But as soon as I try an official or cooked rom it shows;
H
IPL-SSPL by des
H
SPL-1.09.ds
I’m now trying Schaps_WM6Pro_WWE_4.00_Full_Beta3.exe and choose for auto detect and it said 1.40 Olipro and in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
And after 1% I got the ERROR [244] : INVALID MODEL ID message again.
I think my options are getting slim.
Your ModelID is stored on NAND and can be edited quite trivially (mostly).
how it got corrupted I don't know, however, the important question is; can you get into the OS?
He Olipro,
The device it zelf works perfect I can go anywhere I want even in the OS.
Just lead the way.
Changing Model ID
I have a similar problem in that my Model ID got corrupted during a radio upgrade. I now get the same error (244) and am stuck on SPL2.10 and can't downgrade to fix it. Can anyone tell us how to manually change the model ID in the NAND?
Much appreciated.
Dumping NAND
Ok, I'm a relative newbie so appologies before I get flamed. Thanks Olipro for giving me a clue.
I have now got spl 2.60 on my device but am unsure how to dump the NAND. I've worked out how to dump the 3 partitions from the device to dump the OS but am still unclear which part of the device is the NAND. I've read the Wiki on the memory map but am still not too sure.
Anyone able to give me simple instructions to dump the NAND and once I've done that where abouts is the ModelID stored? Do I do this using mtty?
Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=322225
NAND Dump
Thanks Drummer for pointing me in the right direction.
Ive done this bit:
BTW, if you want to do a full backup of you FULL eeprom nand at any time, connect as before and type these commands:
plink HERMES > full.nb (hit ENTER twice)
task 32 (hit ENTER once and only once from now on after every command)
password 0000000000000000 - My device password is BsaD5SeoA which I used instead.
set 1e 1
rbmc me.txt 50000000 7fff800
watch your file grow to 128 MB.
It creates a full.nb file but it stays at 1k!!
** Note I have copied the bootloader file for spl 2.60 on my Hermes and ran that so I can now use that versino instead of the 2.10 thats on my device if that makes a difference and have tried with no joy with either version. Yes I know it says to use 2.30 but I can't work out how to get that on my device due to the ModelID error.
The Model number is contained within the herm1.nb file that was posted by BusStop in that thread. No need for complete NAND reflashing, only that section. You'll see it using a Hex Editor. You should write down your WiFi MAC addess, so you can edit it before flashing the file with the corrected Model number. Now you just have to figure out how to get SPL 1.01 MFG on your device...
Thanks Drummer. I did try flashing the herm1.nb file but of course as I do not have SPL 1.01 MFG it gievs an error. I'll keep trawling through the site and see if I can work out how to get SPL 1.01 onto my device. I'm not going to let this damn device beat me.
Ok so I worked out how to get the ModelID using getdevicedata. Used nbhtool to create a vaild nbh using the ModelID I'd just got and used the spl from 2.30 and it updated that fine.
Excellent.
However did the same with the MFG1.01 and flashed it and......
I now have a dead brick, no power and no response form usb. Time to get a replacement device.
Thanks for all the help I've had. I'm sure it should have worked.
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
Thanks for the advice Drummer however:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber - Nope red light goes out!
Mne shows HHHHHHH
Hi all, i've upgraded my radio and after my model id changed to H.
So, reading some posts i've used NBHTOOL.
1.I've decompiled an original Italian ROM
2.i've obtained a custom nbh selecting only OS and EXTROM and changing my Model number.
3. after that i've flashed the nbh resulting into a write error at 84% and a bricked htc.
Luckily i was able to reflash roms and i processed to second experiment.
I've made a custom rom with only the os, and it WORKED!
so my questions are:
1. can i use my htc even if my external rom isn't flashed (it cames from an old Schaps 4.0 succesful flash)
2. It is safe to proceed installing bootloader SPL using the nbhtool like i did with the os?
In that case i will be able to fix the model id problem by flashinh spl 1.01 and using the wireless fixing method you posted..
Thanks in advance for your reply!
Hi
From my understanding the Ext rom is mainly used for carriers to install there specific addons and customizations so it shouldn't be a problem.
As you can see I did flash spl 2.30 using this method and it worked fine ti was only when something whent wrong flashing 1.01 that my problem happened but I think that may be that I used an nbs file instead of an nb file from what I've read since.
Good luck.
Edit: Just noticed someone on this thread has managed it by going straight ot 2.60 http://forum.xda-developers.com/showthread.php?t=322225
Hello everybody. First have to say that I have been a lot of hours reading the guides and searching at the forums but just can't find a solution.
Could anybody give me advice please ? My O2 xda in german language
ipl 2.15.0001
spl 2.15.0001
gsm 02.19.21
os 2.15.4.47
Want to change to korand's 2.6
have tried to hardspl following all the steps carefully: no success, when I execute romupdateutility_NV_G4, it says "error 300, invalid update tool".
any idea ? thank you.
EDITED: problem solved, found a updated "update utility" and everything done ok.
Please share this update utility with us
I am fixed my problem with hardspl.
At this link you have the best utility with HardSPL. Download that and read rule number 2.
http://forum.xda-developers.com/showthread.php?t=350033
this link
Thanks, but:
I downloaded your update package (zip file complains that there are dual folders but seems ok anyways)
I have a Qtek S200 stuck at BookLoader.
IPL 2.10
SPL 2.20.0001
This tells me it's a G4 device.
When I reboot with Camera and Power I see the USB symbol and I head windows finding the device. Active Sync Installed with USB disabled.
I open command prompt and navigate to the G4 HardSPL directory and run HardSPL.bat.
The utility asks me to press a key, I press a key,
after about 5 seconds a dialog box appears, telling me failed to connect to device , trey , cancel abort.
What's missing here?
Read careful
Connect your device to the usb port then go to HardSPL folder and run HardSPL.bat from your PC. (Thanks to Prislav)
The HardSPL.bat will perform the SoftSPL first and then will do the HardSPL. so you don't have to do the SoftSPL manually.
Before doing the HardSPL you should know:
* SPL - Second Program Loader is a boot loader. SPL is similar to a BIOS in a computer and can be flashed and updated.
* G3 or G4: If you soft reset your phone you will see four numbers on top left of the screen. The first one is IPL version. which has this format : #.##.000# the last digit of IPL version indicates if the device is G3 or G4. the G4 device IPL version will end with 0001 and the G3 device IPL version will end with 0000. for example if your device is G4 you might see something like: 2.20.0001
* the reason we HardSPL the phone is that the original SPL that comes with the phone check the CID
I have a Qtek S200 stuck at BookLoader.
Click to expand...
Click to collapse
If the device is stuck in bootloader, try flashing a WM5 ROM (some on the ftp server) with USB in active sync disabled, and then try HardSPL once the device is running properly.
noonas said:
Thanks, but:
I downloaded your update package (zip file complains that there are dual folders but seems ok anyways)
I have a Qtek S200 stuck at BookLoader.
IPL 2.10
SPL 2.20.0001
This tells me it's a G4 device.
When I reboot with Camera and Power I see the USB symbol and I head windows finding the device. Active Sync Installed with USB disabled.
I open command prompt and navigate to the G4 HardSPL directory and run HardSPL.bat.
The utility asks me to press a key, I press a key,
after about 5 seconds a dialog box appears, telling me failed to connect to device , trey , cancel abort.
What's missing here?
Click to expand...
Click to collapse
oR....................................
have a look to my post 1 ??
Hi Guys,
I'm from Germany and I have the following problem:
I wanted to flash a WM6-Rom onto my SDA 2 / HTC Hurricane.
I did everything that was described in the tutorial but at one point I have got a problem:
When it comes to opening mtty, I can't flash the Rom.
It says:
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Click to expand...
Click to collapse
What to do now?
I have absolutely no idea.
And I would be very glad if somebody could help me to get ANY Rom onto my device.
I'm kind of frustrated right now.
See you.
Timops
it's to small information to say anything.
you must past whole communicates from Mtty (everything)
than we can say something about it
Alright.
Then I will try it again today and post the whole mtty log.
Perhaps you can do sth. with it.
But now I've got the T-Mobile-UK-Rom (WM2003) on my device.
But I really want WM6.
1- do you unlock phone from application lock?
2- do you change CID to 11111 ?
3- do you upgrade phone with latest SPL for hurricane (for hurricane WM6)
4- do you writing commands in mtty yourself? or copy/past? (copying doesn't work)
lazaj007 said:
1- do you unlock phone from application lock?
2- do you change CID to 11111 ?
3- do you upgrade phone with latest SPL for hurricane (for hurricane WM6)
4- do you writing commands in mtty yourself? or copy/past? (copying doesn't work)
Click to expand...
Click to collapse
1- I used the cert.cab. I think this is application unlocking
2- yes I did by using SPV-Services
3- I don't know, but I used PatchedRuu.exe (I think this is that)
4- yes I write them myself
I'll try in a few minutes and post the log if it doesn't work.
But don't hesitate to post any suggestions or information.
BTW: Is my English understandable?
Now this is my log from mtty:
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
Cmd>format BINFS
Format BinFS partition.
Format is completed!!
Cmd>l c:\ROM.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\ROM.bin"
:F=c:\ROM.bin
start download
SAddress 82040000Hh Length 02C00000h
Before flashing new image , formatting old OS is completed!!
Start flashing new image!!!
*checksum = 0, skip checking
OEMFlashWrite(82040000h,8C080000h,01C00000h)
Update BINFS offset 0x00000000 length 0x01C00000 ...
Update BINFS success.
*checksum = 0, skip checking
Image Download Finish
OEMFlashWrite(83C40000h,8C080000h,01000000h)
Update BINFS offset 0x01C00000 length 0x01000000 ...
Flash BINFS failed.
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Click to expand...
Click to collapse
I think I know where the problem is:
I can't get into the bootloader correctly.
When the phone asks me if I want a IU (0) and I press the Zero-Button on the phone, nothing happens.
What to do now?
you must trying to success. maybes SPL was upgrade incorrect, go to bootloader and try to upgrade SPL by patched ruu again
I tried this so often but I don't give up!
I'll try again, maybe I'm lucky.
Who knows?
Where can i get this PatchedRUU ? I have the NBF File but i think a need the RUU program it self, but where to get it ?
here is PatcedRUU http://www.spv-developers.com/forum/attachment.php?attachmentid=65
wrong RUU!!! RUU from above will KILL your Hurricane!!
Above RUU will kill your Hurricane because it for Typhoon.
BTW: I had "CMD55 failed" error when using bad USB-cable... trying another cable made it disappear.
lazaj007 said:
you must trying to success. maybes SPL was upgrade incorrect, go to bootloader and try to upgrade SPL by patched ruu again
Click to expand...
Click to collapse
I have the same problem like Timops...Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I decide to try upgrade SPL..............but nothing...I get the "white background"
now what can I do....? USB connect not working...bootloader not working...maybe jtag?
I try to flash rom ENG to my NIKi
my version is 1.31.406
I read post "Nike SSPL, USPL and HardSPL" by jockyw2001
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
******* but it's still 0% and still boot loader screen*****
I Hard reset my NIKI but still bootloader and show
NIKI100
SPL-1.16.0000
CPLD-4
I try to flash this rom "RUU_Nike_HTC_WWE_1[1].13.405.01_Radio_Nike_1.58.11.07_signed_Test.exe"
It's 1% only and report error 262
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue."
How to repair this
in post "http://forum.xda-developers.com/showthread.php?t=387217" by NetrunnerAT
"1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
I try this It show log
"boot
Fill RSVD information for block 288 to 309
Storage start sector=0xAF00, total sector=0x103C0
Storage start block=721, total block=1039
Total Bad Block in CE: 0
Erase physical block from 1011 to 2032
si backup: Erase physical block from 2032 to 2048
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage 80000000
Jump to Physical Address 10300000"
and still boot loader
how to fix it's
Thank' for reply
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
NetrunnerAT said:
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
Click to expand...
Click to collapse
Sorry For My Eng = =' I'm Thai girl.
I can't Remember lang before flash becouse I don't Know ^ ^ GER or Italy or Rus Lang
It's Not Eng Lang not Vodafone Brand
I'm new bie for this model . I have Dopod 818 pro It's Easy to flash I think Niki Is same
command "cego" notwork
Can I reflash any Office Rom?
What is SPL-1.16.0000 mean It's Hard SPL,SSPL or USPL
I Try to Put camera button and power button
and Use Mtty
boot
InitDisplay: Display_Chip=1
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
My NIKI Can boot and Use Now
I don't Know what Lang
" A Propos de
Windows Mobile 6 Profesional
Processeur : MSM7200-400Mhz
Memorie :101.67 Mo
Conecteur d'ext. :En cours d'utilisation
Informations de L'appareil
Version de Rom :1.31.406.09
Date de Rom :10/30/07
Version de Radio 1.58.16.27
Version de prot.. 25.61.30.03w
Is lang France?
@^ ^@
Hoorayyyyyyy
My phone is back
many thank's for NetrunnerAT
1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
and Now I Use rom TOM_Niki-Project_WM6[1].1_WWE_16keys_signed_Ship.exe
Many many Thank For XDA - Developers
http://www.pdamobiz.com/ <- its a Thai PDA Board!
The most errors on HTC Niki are simulare with HTC Polaris and HTC Kaiser!!!
I hope this helps!
my touch dual is lock at 3 color mode
Sorry for my english....
My niki is locked afther flash for unlock it (supercid)
I've tried to install a sspl and hardspl, but all have crashed at 95%
I've tried to install hardspl renaming the file nbh in NIKEIMG.nbh from sd, but this procedure have only send me message: loading......... and nothing all.....
At this moment my niki is stopped at 3 colors mode
Have you any idea for help me?
Many thanks to all
don't have any idea for help me?
i can use my niki for stop my door?
thanks
Works very well
This really helps me out!!!! Thanks to NetrunnerAT.
but the site is in thai language
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Don't worry, it happens all the time. Just follow the procedure of "How to fix the invalid model ID after bad flashing" step by step as described in the following page:
http://forum.xda-developers.com/showthread.php?t=405814
Good luck!
hi,i make this procedure ,but replay of the athena is this:
Cmd>task 32
Wait interpreter timeout
Level = FF
have read in some post ,when reply is FF is because SPL is original ,in fact my SPL is 1.10.RP00 not 1.12 olinex or olipro ,i needed how do I change only SPL and make open to Athena for upgrade rom.
tnx
RE HELP
I'm trying to put the original ROM, 1% BUT STOPS AND WRITE ERROR VENDOR ID "mtty DO THE PROCEDURE, BUT I DO NOT TO" LEVEL 0 "MA" LEVEL FF "AND I CAN NOT PUT THE MAC LIKE GOING FORWARD?
TNX
please help me
who is help me!!
tnx
nessuno parla italiano e mi fa capire che devo fare
giusto ,chi sa che devo fare?
Maybe this?
gorgomed said:
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Click to expand...
Click to collapse
Try this...I do not know if you need to reset your MAC address...
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
I had this once and I needed a new MAC address....you can get it from any unused wireless device.
i make this procedure 100 times,but also write up :
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0 - MY RETURN NOT LEVEL 00 BUT LEVEL FF
BECAUSE I DO NOT SPL 1.20 OR 3.XX NOT PACHED,THIS MY PROBLEM
I DO NOT CHANGE SPL ,SAY YOU MAKE A SOLUTION?
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
When you try to unlock did you use HARDSPL from cmonex? Is the SPL SPL-v1.10.RP00 the ORIGINAL spl of the phone?
** If you DID NOT use HARDSPL YOU WILL GET Level=FF.
** HARDSPL is available here: http://forum.xda-developers.com/showthread.php?t=316846
Just retry HARDSPL. When you gst to boot loader you should see olipro SPL.
If I understand correctly, you made a mistake by not changing SPL in first case. It is not clear what you did to 'unlock" the phone...like you said in the first post what did you do for unlocking? How did you unlock?
The best unlock is HARDSPL>>>
yes,i make procedure but in the end athena is blocked,with up writing,now not run ,only reset and bootloader,do not have SPL 1.20 olipro ,not have MAC ,if i writing new ROM also original ,reply "invalid vendor".
Now i make AthenaWrapper but end write this"
ERROR 300 INVALID UPDATE TOOL.
tnx
What ROM are you trying to flash? I think since it still has the ORIGINAL SPL it will take only the original HTC ROM? Did you try that?
Try this other unlocker also ....it is here: http://forum.xda-developers.com/showthread.php?t=315831
Also, I need some way to text you better than this .....otherwise I can only give one suggestion per day !!!!
x7500
please i have the same problem.
but when a type this Inbs filename.bin 75108000 what must i do after that?
my athena caracteristic are:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
thank you
try flashing an spl 1.2 rom
readthe guide
http://forum.xda-developers.com/showthread.php?t=429013