can somebody please help me...
after i flash the shadowline rom(build 21815) its going crazy..
after boot that device is going to start up right?but mine cannot..
its display htcTOUCH PRO(on the first boot) and will hang and eat my batery..
sorry for my language..
~j_loo~ said:
can somebody please help me...
after i flash the shadowline rom(build 21815) its going crazy..
after boot that device is going to start up right?but mine cannot..
its display htcTOUCH PRO(on the first boot) and will hang and eat my batery..
sorry for my language..
Click to expand...
Click to collapse
[assumption: HardSPL'ed]
Remove the battery from the device to turn it off and put the battery back in but don't turn on the device.
Copy a knonw "working" rom to your SD card and name RAPHIMG.NBH. Place the SD Card in your device.
Hold the Volume Down button and while holding it down, turn the device on. You should enter the Tricolor Bootloader and the NBH file on the SD card will be flashed to your device.
HTH,
You're phone's cdma, right? Flash a stock sprint rom (e.g. if you're on sprint).
not cdma is gsm
~j_loo~ said:
not cdma is gsm
Click to expand...
Click to collapse
Then the procedure I noted should work ... assuming your device is HardSPL'ed.
@Farmer Ted:
Good catch ... keep forgetting to ask that question.
hilaireg said:
Then the procedure I noted should work ... assuming your device is HardSPL'ed.
@Farmer Ted:
Good catch ... keep forgetting to ask that question.
Click to expand...
Click to collapse
i try it later cause i dont hav a card reader right now ...what cause this problem happen?and can you giv me a good rom for me or link it to me..
~j_loo~ said:
i try it later cause i dont hav a card reader right now ...what cause this problem happen?and can you giv me a good rom for me or link it to me..
Click to expand...
Click to collapse
Well...
Ir can be caused by many things... It's actually hard to say why... It could be a bad flash, or some allocation issue on you phone...
If you can't flash another ROM right now you can try [I am not saying it will work] to hard reset... Action + Down + Soft Reset and follow on-screen instructions.
Regarding your question about a «good ROM» recommendation... That's up to you. It depends on your preference, a question of personal taste... It depends on what you expect form a ROM... Etc... No answer to that question
In extremis, if you want to be ABSOLUTELY sure about the ROM version you will use, you can always revert to the stock ROM prior to flashing a cooked one...
Good luck.
Cheers.
Kevlar-Source said:
Well...
Ir can be caused by many things... It's actually hard to say why... It could be a bad flash, or some allocation issue on you phone...
If you can't flash another ROM right now you can try [I am not saying it will work] to hard reset... Action + Down + Soft Reset and follow on-screen instructions.
Regarding your question about a «good ROM» recommendation... That's up to you. It depends on your preference, a question of personal taste... It depends on what you expect form a ROM... Etc... No answer to that question
In extremis, if you want to be ABSOLUTELY sure about the ROM version you will use, you can always revert to the stock ROM prior to flashing a cooked one...
Good luck.
Cheers.
Click to expand...
Click to collapse
err...another question...i dont hav RAPHIMG.NBH but i hav ruu_signed.nbh can i rename this ruu_signed.nbh to RAPHIMG.NBH and paste to sd card
~j_loo~ said:
i try it later cause i dont hav a card reader right now ...what cause this problem happen?and can you giv me a good rom for me or link it to me..
Click to expand...
Click to collapse
Try this procedure:
Remove the battery from the device to turn it off and put the battery back in but don't turn on the device; also remove any SD Card - shouldn't be required since you don't have one at the moment. Connect the device to your computer using a USB cable.
Copy a known "working" rom to your computer, you'll also need the Custom Raphael Flash utility. Rename the rom to RUU_SIGNED.NBH.
http://forum.xda-developers.com/showthread.php?t=410761
http://forum.xda-developers.com/showthread.php?t=448008
Hold the Volume Down button and while holding it down, turn the device on. You should enter the Tricolor Bootloader; after a minute or so, you should see the word "USB" at the bottom of the screen. If not, there is a problem and you will need to use the SD card approach.
Launch the Custom Raphael Flash utility; it should discover your connected device. Proceed as you did before to flash the RUU_SIGNED.NBH.
HTH,
~j_loo~ said:
err...another question...i dont hav RAPHIMG.NBH but i hav ruu_signed.nbh can i rename this ruu_signed.nbh to RAPHIMG.NBH and paste to sd card
Click to expand...
Click to collapse
Yes, you just rename the file and transfer to SD card as hilaireg stated in the first reply. Then just follow the rest of the instructions from there. And there is always this thread on flashing for all reference and answers.
haha thank to all expert...i done it.my little lappy going to life.i flash it to different rom and its going fine ,i think the current rom i use is broken or damage...thanks for your help..
Related
So I dont have a windows computer. Im not gonna install Windows on anything, i dont plan too. i was wondering if it is possible to HardSPL from a microSD card, like we do for ROMs, any ideas? thanks.
Rename the HardSPL-Image-File to RAPHIMG.nbh and flash your device. Thats all
faeArai said:
Rename the HardSPL-Image-File to RAPHIMG.nbh and flash your device. Thats all
Click to expand...
Click to collapse
Where do I get the HardSPl image file!? I cant extract it from the exe and i have no clue where else to get it.
I dont think you can hardspl through a SD card. Look at the Raphael wiki
Use at your own RISK!!!!
I extracted it from the EXE. But beware I have never flashed hardspl from the SD. I have no idea if its going to work. If you try it please report your finding. Please report back so we will know if it works or not. I also renamed it RAPHIMG.
Somebody else reported in that flashing HardSPL from an SD card simply bricked his device. In other words: you had better not try!
Listen to the Finger-the Finger will not do you wrong.
Any update... Did you give up on this
As finger and Ted said better not try it and read the wiki on Hardspl.
just read this
Froschfinger said:
Somebody else reported in that flashing HardSPL from an SD card simply bricked his device. In other words: you had better not try!
Click to expand...
Click to collapse
I tried on my Touch pro and it didn't work, how ever it didn't brick my device, just got stuck on the bootloader screen, gave it a soft-reset and it was back to normal, had to do it through the PC.
However, if you read the link posted above you'll find the following:
Flashing via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Radio from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Radios Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Plug the microSD Card into the phone
6. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
7. Follow the onscreen instructions to start flashing
8. After the flash finishes press the reset button with the stylus to reset the device
6. JOB DONE. Well Done YOU DID IT!!
Click to expand...
Click to collapse
I never tried the process above, but it's worth a try, please report your status.
vivalamoza said:
I tried on my Touch pro and it didn't work, how ever it didn't brick my device, just got stuck on the bootloader screen, gave it a soft-reset and it was back to normal, had to do it through the PC.
However, if you read the link posted above you'll find the following:
I never tried the process above, but it's worth a try, please report your status.
Click to expand...
Click to collapse
Thats for Radio and not Hardspl. Those are two different things
You canNOT flash an SPL to your device from an SD card. Needs to be done via a USB cable...
there is no working method to flash HardSPL from SD card. It is not working like normal flash... DO NOT EVER TRY TO DO THAT! If you are using linux you can flash HardSPL from windows running in vmware workstation, or vmware fusion on MAC OS X. Any other methods will lead you to serious trouble!
I tried to put that file on my phone, then booted into the tri-colored screen. it didnt recognize the NBH. So i didnt even get to try it.
dk103213 said:
I tried to put that file on my phone, then booted into the tri-colored screen. it didnt recognize the NBH. So i didnt even get to try it.
Click to expand...
Click to collapse
Dude, it has been mentioned many times: it WON'T work. But hey, don't take our word for it--why not ask Olipro or cmonex (the folks who created HardSPL) and see what they have to say...
As stated by several senior members in this thread ... HardSPL is not intended to be flashed via SD Card.
I highly advise following the procedures for HardSPL as already noted in this thread:
http://forum.xda-developers.com/showthread.php?t=448008
Since you are not interested in installing Windows, you may need to ask a friend who is running Windows to assist you.
Closing thread.
Hi, All
I have been having problem flashing my HTC Touch HD2 back to stock.
I have followed the instructions on Bepe's Thread but I am still having problem.
This is what I have done:-
1) Formatted my MicroSD with FAT32
2) Copied the NBH from stock rom, renamed to LEOIMG.NBH & copied to route of memory card.
3) Inserted memory card into phone, held down Volume down button for 3 Seconds & pressed power button.
I get the multi coloured screen but no instruction to flash rom. It just stays on that screen & nothing happens.
I have tried different roms & different memory cards just to test it, but still no luck.
My HD2 is running HSPL & Topix Custom rom.
I would appreciate the help as I am selling my HD2 with Warranty & don't want void Warranty.
Please Help
Thanks
JAW$
not totally sure, but you might need a gold card to do this....
Sihaz said:
not totally sure, but you might need a gold card to do this....
Click to expand...
Click to collapse
Hi,
Do you think I should try HARDSPL ing the phone again
Thanks
JAW$
does it come up as HSPL on bootloader screen?
Tbh you might as well re-install HSPL as administrator.
Then re-download and checksum the leoimg.nbh.
Also check if the device sees the SD card and can read it in normal use in the ROM.
If in doubt, you can always install the stock ROM via the RUU app which HTC provide. that should overwrite HSPL.
chris_ah1 said:
does it come up as HSPL on bootloader screen?
Tbh you might as well re-install HSPL as administrator.
Then re-download and checksum the leoimg.nbh.
Also check if the device sees the SD card and can read it in normal use in the ROM.
If in doubt, you can always install the stock ROM via the RUU app which HTC provide. that should overwrite HSPL.
Click to expand...
Click to collapse
I have flash my HD" with Stock HTC RUU ROM, but the SPL version has not changed
yeah re install hspl....did you back-up your official stock rom?
JAW$ said:
I have flash my HD" with Stock HTC RUU ROM, but the SPL version has not changed
Click to expand...
Click to collapse
did you flash it via sdcard then? if you did it should have overwritten..
if you are still struggling to get the file recognised flashing via the sdcard, then try another sdcard, such as the original 2gb one it came with..
Try plugging the device in to the mains. Sometimes does weird things for me... If it is, then unplug it and try again.
It also may work better with FAT (FAT16) rather than FAT32, but I have flashed ROMs from FAT32.
i sucessfully put my o2 ROM back on, ! i checked the SPL and even that went back to stock. flashed as you did, from the storage card! mmm!
JAW$ said:
1) Formatted my MicroSD with FAT32
[...]
I get the multi coloured screen but no instruction to flash rom. It just stays on that screen & nothing happens.
JAW$
Click to expand...
Click to collapse
I had the same thing. I eventually succeed after formatting my microSD INSIDE the device. Before I formated it in my notebook.
Try this way.
Segoy
Segoy said:
I had the same thing. I eventually succeed after formatting my microSD INSIDE the device. Before I formated it in my notebook.
Try this way.
Segoy
Click to expand...
Click to collapse
I followed Segoy's way.
It works!
THX mate
Segoy said:
I had the same thing. I eventually succeed after formatting my microSD INSIDE the device. Before I formated it in my notebook.
Try this way.
Segoy
Click to expand...
Click to collapse
What was your problem & what exactly did you do.
I have tried what you said but still can't get it to work.
Thanks
JAW$
Hi,
Could you tell what you exactly done & what rom you used. I really need to get this done for tomorrow as I have to send the phone off as I have sold it.
Please please explain in detail as I will do exactly what you done.
This has been lingering for a few days now & I have contacted numerous people without success.
Appreciate your help
JAW$
jaws
1 are you sure you are using the correct rom.you haven't said whether your phone is htc unlocked or provider rom locked.
2 you never answered the question as to how you were flashing, because you said that you flashed the wwe but hspl was still there, which can only mean you used usb, plus if your phone is provider locked then you need a different rom.
confirm you have the correct rom , format your sd card through the phone, copy over the ruu signed.nbh rename leoimg.nbh
reboot your phone holding down volume.
anything?
Hi
Does this procedure of getting back the spl makes HARD RESET ?
Thanks
kikoj said:
Hi
Does this procedure of getting back the spl makes HARD RESET ?
Thanks
Click to expand...
Click to collapse
yes
.....
samsamuel said:
jaws
1 are you sure you are using the correct rom.you haven't said whether your phone is htc unlocked or provider rom locked.
2 you never answered the question as to how you were flashing, because you said that you flashed the wwe but hspl was still there, which can only mean you used usb, plus if your phone is provider locked then you need a different rom.
confirm you have the correct rom , format your sd card through the phone, copy over the ruu signed.nbh rename leoimg.nbh
reboot your phone holding down volume.
anything?
Click to expand...
Click to collapse
The phone is unlocked & Simfree. When I flashed it with the WWE rom via USB.
Also I renamed the stock rom to leoimg.NBH & copied to root of memory card. I held down the Volume down button for three seconds & then pressed & held the power button. When I had it formatted as FAT32 nothing would happen, but when I flashed it with FAT16 I got a White loading screen & nothing happened after that.
I can get into the Hard Reset Screen.
What am I suppose to see on the screen.
Thanks
JAW$
JAW$ said:
The phone is unlocked & Simfree. When I flashed it with the WWE rom via USB.
Also I renamed the stock rom to leoimg.NBH & copied to root of memory card.
Thanks
JAW$
Click to expand...
Click to collapse
OK, just to confirm, you downloaded the wwe .exe file, you opened the exe with a zip program, extracted RUU_Signed.nhb, moved ruu-Signed.nbh to your sd card, which you had formatted IN THE PHONE and then you renamed ruu_sugned.nbh to leoimg.nbh
Then, phone off, , , press and hold vol down, tap power but contiune to hold vol down.
phone SHOULD boot into bootloader, and it should automatically discover there is a leoimg.nbh file on your sd card.
If it is the wrong image, you should get a failed instal, but if you phone does nothing at all then either the sd card is faulty, or teh sd card reader, or the nbh file.
just a thought, when you are renaming the ruu_signed.nbh to leoimg.nbh, you do have file extensions shown? becaue if you don't, then you could be renaming the nbh file to leoimg.nbh.nbh , , , you wouldn't be the first.
itoYo how did you do it?
Hi itoYo i have the same problem have to return it to o2 and need to change it back to ROM 1.4 how did you do it? in very simple language please?
Mate, hold volume down and power buttons a bit longer
It will go from that tri-color screen to a procedure of installing
Ok i dunno what's happening but this is my situation: i'm using Android since august and had zero issues..this morning i tried to make a call but the touchscreen was unresponsive..i thought was an usual android freeze, so i made a soft reset and here's a big bad surprise..thouchscreen was STILL unresponsive even under winmo (artemis rom) ..any help before i do an sspl with stock rom and send it back claming my warranty??
patanello said:
Ok i dunno what's happening but this is my situation: i'm using Android since august and had zero issues..this morning i tried to make a call but the touchscreen was unresponsive..i thought was an usual android freeze, so i made a soft reset and here's a big bad surprise..thouchscreen was STILL unresponsive even under winmo (artemis rom) ..any help before i do an sspl with stock rom and send it back claming my warranty??
Click to expand...
Click to collapse
unfortunately, i have been part of 5 or so threads (even one i started) with the same problem. keys work but screen doesn't. i was able to flash roms but no help! had to return the phone/ send in under warranty.
sorry mate. think the touchscreen is dead.
jsmccabe78 said:
unfortunately, i have been part of 5 or so threads (even one i started) with the same problem. keys work but screen doesn't. i was able to flash roms but no help! had to return the phone/ send in under warranty.
sorry mate. think the touchscreen is dead.
Click to expand...
Click to collapse
thanks for your answer pal, think i'm gonna do the same..
sry if im being noob but, how do you flash the stock rom using sd card, with unresponssive screen touch..? =/
patanello said:
thanks for your answer pal, think i'm gonna do the same..
Click to expand...
Click to collapse
some of us were talking a bit back about ? if it was android. not sure; coincidence is not causation i guess. wish ya luck. the new phone i got (granted tis tmo us) is working great....though haven't put android back on. good luck!
nlmO_o said:
sry if im being noob but, how do you flash the stock rom using sd card, with unresponssive screen touch..? =/
Click to expand...
Click to collapse
same way you do with screen being responsive:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. If you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
from: http://forum.xda-developers.com/showthread.php?t=653614
i actually just flashed over usb.
thanks jsmccabe78, already flashed stock spl, radio and rom..in a couple hours i'll bring my phone to the customer care..let's wait..
btw i think android have something about it..dunno what..but i gotta a feeling it's because of it..
my hd2 is just came back from HTC and..it's not "my" hd2..they gave me a brand new one! dunno why but it's great!
Hi Experts,
I was trying to load a India official ROM on my UK Vodafone HD2, and it now always shows this ROM is not suitable for ur phone, please upgrade the correct ROM. The phone now only shows this message. I tried to load a Custom ROM through SD card. It installs but at the end when I press the reset button, it again displays the same message in RED.
Please help.
A beer from me if you get this one cracked for me.
Regards
Chirag
1st turn back on your previous stock ROM.
Than read/follow this:
http://forum.xda-developers.com/showthread.php?t=591314
Sorry, but how do I go back to my previous Stock ROM?
chishree said:
Sorry, but how do I go back to my previous Stock ROM?
Click to expand...
Click to collapse
1) download the correct stock ROM by using your S/N
2) Connect your device over ActiveSync
3) Run your downloaded file.
the phone isnt booting, cannot connect to active sync. it stucks at the message screen.
chishree said:
the phone isnt booting, cannot connect to active sync. it stucks at the message screen.
Click to expand...
Click to collapse
Try then to flash over SD
1) Prepares your SD (<8GB SD Card)
a) Format your SD by FAT322) Take the "RUU_signed.nbh" from your ship ROM and copy it to the SD card.
3) Rename the "RUU_signed.nbh" to "leoimg.nbh".
4) Reset the device while pressing the volume down button.
5) Follow the instructions on your screen.
so i have this ruu.exe from HTC with, how do i get the .nbh from it. ignore my foolishness here, as i m not much tech savvy.
chishree said:
so i have this ruu.exe from HTC with, how do i get the .nbh from it. ignore my foolishness here, as i m not much tech savvy.
Click to expand...
Click to collapse
No problem sir,
When you get the .exe From the ROM; right click on it and select extracting by (WinZip/WinRar/7Zip)
Then you will see a lot of files in it; just take out the "RUU_signed.nbh"
i'll try this, and if it works a beer comes ur way as a thanks from me.
Make attention to Download and use the UK Vodafone ROM!
Edit;
This was the latest one: ROM version:1.72.161.3
here comes your beer, enjoy.
Sorry but how much is the beer cost? let me know and i shall transfer to ur paypal.
chishree said:
here comes your beer, enjoy.
Sorry but how much is the beer cost? let me know and i shall transfer to ur paypal.
Click to expand...
Click to collapse
You are free sir, there is no minimum.
happy christmas.
3US$ in ur PayPal now, thanks once again
Hi,
Any idea on why my external speaker isnt working?
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.