Just trying to find out if anybody has been able to install the iconic faceted "Diamond" style back and replace the flat back on the Verizon Touch Pro. Does it fit?
I was thinking of buying one off ebay.
Searching around I was only able to learn it wasnt compatible with the Sprint model because of slight body diffrences. The Verizon model however, does feature the sharper square corners.
I can tell you for sure that the Verizon Diamond cover Will Not work on the Verizon Touch Pro. The squares are the same, but it isn't thick enough (extra thickness from the keyboard on the touch pro.)
I tried this when my Touch Pro touch screen broke, they let me use a new Diamond temporarily until a Touch Pro became available for warranty replacement.
Related
I have been searching on eBay for a silicone case, crystal case and much needed new Touch Screen (Not the LCD, just my digitizer is well scratched).
Now when i examine closely the crystal case for the Cruise the ear speaker is in a different position and my o2 XDA Obrit 2 is more rounded, and different shape screen.
Can anyone point out listings for these that would definately fit the Black Orbit 2, you know the o2 branded phone with the rounded edges.?
I desperately need a screen if anyone has to sell.
and the cases of course,
cheers.
(Even if u stumble across this forum in6mths from now, and u have these 4 sale or know where i can get, please PM me cos chances are I will still be looking, as I buy/repair/sell these phones and always need rare parts!)
but need now!
thx
I've got a rubber case like this http://cgi.ebay.co.uk/Black-silicone-case-LCD-protector-for-HTC-Touch-Cruise_W0QQitemZ120439495919QQcmdZViewItemQQptZUK_MobilePhones_MobilePhonesCasesPouches?hash=item1c0ac0dcef&_trksid=p3286.c0.m14&_trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 works fine for me.The digitizer is it like this http://cgi.ebay.co.uk/Touch-Screen-Digitizer-Glass-Len-for-O2-XDA-Orbit-2-II_W0QQitemZ300320151559QQcmdZViewItemQQptZUK_Computing_LaptopAccessories_RL?hash=item45ec79d807&_trksid=p3286.c0.m14&_trkparms=65:12|66:2|39:1|72:1683|293:1|294:50 look at the ear speaker is it cut out i made the mistake and bought a touch cruise one just look for the o2 xda ones the touch cruise wont fit.
http://cgi.ebay.co.uk/Touch-Screen-Digitizer-Glass-Len-for-O2-XDA-Orbit-2-II_W0QQitemZ300320151559QQcmdZViewItemQQptZUK_Computing_LaptopAccessories_RL?hash=item45ec79d807&_trksid=p3286.c0.m14&_trkparms=65:12|66:2|39:1|72:1683|293:1|294:50
Thats the exact item I bought about 3 weeks ago !!
How wierd is that LOL
The reason I ask is because I personally prefer the aesthetics on the Euro Touch Pro 2. Also, I don't want that stupid flap sticking out on the side of my Touch Pro 2. The Euro Touch Pro 2 battery cover doesn't have the ugly flap. I dont swap 2 million SD cards on my phone anyway so all the flap does is get in the way. My T-Mobile Wing does that all day long. The flap for the MicroSD gets stuck or comes out when putting the Wing back into it's case or when I slide my hand on the side of the phone.
Yes, I know the only real way to tell is if you actually try it (I will get my chance August 12th. I have a friend with a Euro Touch Pro 2 so I will try the battery cover swap, then find somewhere online to buy a Euro Touch Pro 2 battery cover), but does anyone know more than just "dimensions" of the phone. Anything like actual locking points on the back of the T-Mobile Touch Pro 2, etc?
Well, discovered a solution on Ebay. Replace the entire casing for the USDM Touch Pro 2. Hopefully this works. Then I can get something close to the Euro Touch Pro 2, if not better. (Won't get confused for being an iPhone all the time!!!)
You knew it was coming. I'm looking to buy a Touch Pro 2 on T-mobile usa contract. However, I'm not a huge fan of what T-mobile has done to the phone. Can anyone here confirm whether the housing differences are cosmetic or not?
I'm fairly certain that the innards are the same across the board, but the T-mobile version doesn't have the same rounded edges that the htc version does. The corners are more pronounced for t-mobile. I'd hate to spend 50-80 bucks on a housing and have it not fit.
Any help would be greatly appreciated. I have a T-mobile G1 now, and I'm looking to get back to WM. Android just isn't as 'open source' as I had originally imagined.
I think it's possible. All the buttons are in the right place and it seems silly to change the innards of the phone.
The only problem is that with the HTC version, you'll have an empty hole for the forward facing camera.
I'm not sure if the glass cover is the same size, it appears bigger on the TMO version than the HTC version, just my opinion.
I like my Tmo TP2, but I wish it wasn't brown. It's actually a pretty attractive package, I thought brown would be super fuglie, but I would much rather have the stock HTC black and silver... or something else, all black perhaps.
Now that I took a closer look at the original HTC version, it's come to my attention that there isn't a soft reset button on the side of the phone. Only the hole for the secondary microphone used for the speaker phone.
It could be hidden under the battery case because the HTC battery case covers the sides of the phone whereas the T-Mobile verson only covers the back. It sort of makes sense because the T-Mobile version gives easy access to the SD slot so I don't see why they wouldn't do the same for a soft reset button.
This is all merely speculation. If somebody could confirm that there IS a soft reset button on the HTC version hidden beneath the battery cover, I'd consider taking the hit and buying a replacement HTC case for a swap.
Hi, just to confirm there is a soft reset button hidden under the battery cover (unbranded HTC). It's about 1cm below the mic hole and slightly to the left if that helps.
d0s said:
Hi, just to confirm there is a soft reset button hidden under the battery cover (unbranded HTC). It's about 1cm below the mic hole and slightly to the left if that helps.
Click to expand...
Click to collapse
It helps greatly. This goes to show that the internals on the T-Mobile version are exactly the same as the unbranded HTC version. Doing a case swap should, theoretically, fit just fine.
Now to find a sub $50 replacement case lol.
nevermind. didn't read right
Sdcard slot is on the side for T-Mo, I read that Unlocked or OEM TP2 have it behind the battery.
SD card slot on OEM TP2 is behind the battery cover but it appears to be in the same spot as the TMO version. The chassis of the OEM vs TMO version looks slightly different, hopefully not too different.
At any rate, you would have to buy the full housing for the OEM AND the digitizer screen to convert a TMO TP2, in my opinion because the two screens are different sizes.
Anyone tried this yet
I'm wondering the same thing too, I have found many housing, even the original silver one but it seems like it needs a new screen (since the HTC one has a bigger screen plate than the Tmobile it appears)
+ the back where the speaker is for the tmobile is part of the inner phone built, which might interfere with the full silver plating of the HTC original. So from pure speculation of the build, I believe it will not work...
But I have msged several members on this issue and awaiting their reply to see if they have tried it and succeeded
jehlinger said:
SD card slot on OEM TP2 is behind the battery cover but it appears to be in the same spot as the TMO version. The chassis of the OEM vs TMO version looks slightly different, hopefully not too different.
At any rate, you would have to buy the full housing for the OEM AND the digitizer screen to convert a TMO TP2, in my opinion because the two screens are different sizes.
Click to expand...
Click to collapse
No they're not. Both phones have 3.7" screens. The only difference is the housing and the keyboard. The TMOUS version has the ALT key first, then the CTRL key whereas the unbranded HTC version has the CTRL key first, then the ALT key.
All the other buttons are in the exact same position. Like I said before, I'd love to be the guinea pig, but not for $80.
The T-Mobile version has tapered edges ( corners ) compared to the OEM version. Not sure if this would pose a problem or not. Might just be cosmetic.
source: http://www.engadgetmobile.com/2009/08/12/t-mobile-touch-pro2-review/
It is not the same
Htc can call it the Rhodium or whatever, When the maual was leaked codename TUNGSTEN.
There are not the same, you can not change it to look like the other Touch Pro 2.
This device will be outdated in less than 6 months.
Devices getting ready for Winows 7.
Not that serious.
might be outdated in six months, but I doubt there will be a 2100/1700 device available with Windows 7 anytime soon.
Also, the manual might be codenamed TUNGSTEN, but when I had put it in bootloader before loading HSPL, it said "RHOD210" in bootloader with no reference to TUNGSTEN.
I just might try this. I know a guy who is pretty good with phone mods, but I will have to replace the faceplate as well. As in kable's link showing the generic TP2 and T-mobile version side-by-side the faceplates are different sizes. So it's going to be about a $120 mod plus labor.
G1 now getting WM update check it out
I see this thread is a bit dated, but has anyone actaully attempted this conversion yet? I see the housings for sale on CNN.cn and ebay, but doesn't look like it would be an exact fit with the T-mobile version considering the more rounded edges on the front rim of HTC housings.
Just wondering if anyone has actually gone through with it, and could fill me in on all that is necessary.
InGeNeTiCs said:
You knew it was coming. I'm looking to buy a Touch Pro 2 on T-mobile usa contract. However, I'm not a huge fan of what T-mobile has done to the phone. Can anyone here confirm whether the housing differences are cosmetic or not?
I'm fairly certain that the innards are the same across the board, but the T-mobile version doesn't have the same rounded edges that the htc version does. The corners are more pronounced for t-mobile. I'd hate to spend 50-80 bucks on a housing and have it not fit.
Any help would be greatly appreciated. I have a T-mobile G1 now, and I'm looking to get back to WM. Android just isn't as 'open source' as I had originally imagined.
Click to expand...
Click to collapse
if you ever change yours out, i would definately, jump on your old case. i love the bronze colour. im not digging the AT&T scheme. if you swap out the keyboard hit me up, that's what i really am wanting.
I want to switch it myself.I do not like how it looks and also ProClip does not have a car mount holder for the T-mob TP2.
The only reason I got it is the 3g.
Did somebody succeed in replacing the covers?
Just saw this on ebay...Im a fan of housing and facia. But i know %98 of TP2 owner right now dont wanna touch the Hardware section of the phone.( for customizing)
It Just nice too see that we can tweak not only whats inside but also the outside too... Im just hoping for a nice fit and high quality. Its too early to tell how good this housing is but i wanna know soon.
http://cgi.ebay.co.uk/ORIGINAL-HTC-...s_JN?hash=item4cea1e075a&_trksid=p3286.c0.m14
I also noticed that a couple days ago but they only offer red and blue right now. I'm not savy enough but I think it's a cool options
For that, did you know how to dismount the TP2 ?
Looks like not really easy to operate at first glance...
You get a screwdriver with it ... just find all the screws and replace!
wait few months... dismantling this phone will be on youtube!
I noticed those when I bought my TP2 last week... to bad they are only red and blue. I would be down for black, or maybe a nice dark green. They look nice from the photo. I don't like taking apart slider phones... PITA
The Wing wasn't so bad. I did the whole thing solo since my brother broke his screen and there weren't any dismantling guides available yet. It's easier than you think... just don't force anything and keep a sharp eye open for screws.
The only problem with swapping the case for a T-Mobile version is that you have to keep the T-Mobile keyboard. The layout is unique to T-Mobile and the HTC version (as well as other carriers) vary from model to model.
freakingwilly said:
The Wing wasn't so bad. I did the whole thing solo since my brother broke his screen and there weren't any dismantling guides available yet. It's easier than you think... just don't force anything and keep a sharp eye open for screws.
The only problem with swapping the case for a T-Mobile version is that you have to keep the T-Mobile keyboard. The layout is unique to T-Mobile and the HTC version (as well as other carriers) vary from model to model.
Click to expand...
Click to collapse
It's really easy to swap cases. I had to replace the screen on my room mates Kaiser which is a slider tilt screen device as well. Took me 40 mins tops & I had to completely disassemble it. Will probably have to again soon. He broke his screen a second time lmao. The one thing I'll note though is for T-Mobile, the whole device is different basicly. The screen does have a tappered edge & the screen cover is bigger & the battery cover is a completely different design. the Stylus doesn't go through it. So, the T-Mobile wouldn't be completely changible. As for the keyboard, that can be changed via ROM. The HTC Kaiser has a different KB Layout than the AT&T Tilt, we just install a CAB to "fix" this as the ROM's are made for the HTC version. Also, the Sprint/Verizon/AT&T(From what I read) have Headphone Jacks. You could arguably use only part of the kit, but for $80-100+, I want one completely compatible with my device.
As for Colors, there's a full silver/full black/& black & orange version available. I wish they made them available in pieces so you could mix & match parts. For example the Battery covers.
Anyone knows whether a housing is available for the european version? Mine has some ugly scratches due to close contact with the asphalt Can't find a new housing though, only bezels... I need a new grey edge around the keyboard to which the battery cover is attached aswel. Is this even possible?
Luckily, the keyboard, screen and batt cover are still intact, and the phone is still functioning properly. It is now protected by a plastic rubberized case and a screenprotector.
Help would be very welcome!
I'm thinking about giving this a try to replace the screwed up button layout that ATT provided. If I can just swap the buttons and the remap the keys with a cab file I'm thinking I can get the QWERTY keyboard back to it's original form.
Anyone else tried this?
Jon
Tried going to the link but it appears to have been "removed".....anywhere else?
This one is working for me.
http://cgi.ebay.com/HTC-TOUCH-PRO-2-T7373-OEM-RED-FULL-HOUSING-KEYBOARD-US_W0QQitemZ350292809157QQcmdZViewItemQQptZPDA_Accessories?hash=item518f1415c5
Lets focus on getting everyone behind this one thread - maybe we can get someone to confirm! Thanks! http://forum.xda-developers.com/showthread.php?t=547632&page=4
Schmurtz1968 said:
For that, did you know how to dismount the TP2 ?
Looks like not really easy to operate at first glance...
Click to expand...
Click to collapse
Dismantling HTC Touch PRO2, HTC Rhodium in pictures...
The above dismantling link has been in the XDA-Wiki for several months now.
So what? If someone asks a question and I can help, I sure will. Or should I be an smartass and tell it's around here, use the search... Maybe it's your thing, not mine.
i'd like to try to replace the bezel on the screen-part, it's got little wholes and even a completely crushed section.. but according to the link you'll have to disassemble the whole keyboard-part in order to do that.. isnt there an easier way to replace the bezel??
just wanted to let everyone know that I have the black/blue case from ebay china. It took 3 weeks but I finally have it.
After taking apart my g1 and 90% housing conversion from white to black. I accidentally cut one of the ribbons off and broke the phone. So im a little scared to take apart this $400 phone. Didnt mind the g1 because there dirt cheap and easy to find another one.
If you all can gather some links and any guides I will probably convert my tmo tp2 to the new housing sunday mourning. unless someone can confirm that its extremly easy to switch housing.
Just an example of the g1 dissemble.
http://www.youtube.com/watch?v=3PdhXx3g9nU
ive been modding hardware since everyone had a nextel i730. ive seen alot of crappy poorly made housings in my days. usually the first and second generation batches of housings that come out are poorly cut, or made of brittle plastics. i would advise that when looking for housings(especially for expensive devices), that you get a 3rd generation housing and look on youtube for directions.
So excited.
I am trying to covert my T-mobile touch pro 2 soon. The full housing will arrive in 2 days. I dropped my precious on the pavement.... T-mobile housing is nowhere to be found so I bit the nail. Hopefull it's going to turn out awesome
Check this one for taking apart. flickr.com/photos/[email protected]/sets/72157621828152091/
Hi there!
I've a T-Mobile Touch Pro 2 that is quite beat up & I want to replace the whole housing.
Problem is where I'm living right now, the T-Mobile housing costs double of the standard Touch Pro 2 housing.
Is it possible to fit the motherboard, flex cable & LCD panel of the T-Mobile onto a HTC Touch Pro 2 casing with the power button?
I would need the touch screen & call/navigation buttons as well.
Please advise me if you know anything about this.
Thanks!
Konker