I installed 2005, and couldn't sych at all by AS4, everytime it tried to connect, i said looking for changes and then a protection fault, so I downgraded to wm2003se and active sych couldnt connect, I reinstalled AS 3.7 and then 3.8, but it can not run at all it just starts connecting, then stops and I can not show Activesynch window, it can not even explore the device
does anybody have a solution for this, or do I have to format and reinstall windows
yo medman
personally i think it was a bad mistake to upgrade to W2005. cause its still in the development phase and u wont find a lot of help from us users cause most of us are still waiting for a stable version to come out
looking at u'r situation
hard reset u'r PPC, do not connect u'r USB.....now install 3.8 MSYNC....... restrt u'r computer.....n then once rebooted......connect the USB cradle with u'r comp and put in u'r PPC...
it shld work now..
best of luck
sync problem...solved!
hey medman,
i don't see why every one is dissing wm2005, its a great rom!
but for the people who are having problems with connecting their device with wm2005 to ActiveSync 4.0 i figured out what is wrong:
if you connected your device to your computer before you installed the new
ActiveSync, it set your device with no driver, and even if you have the
ActiveSync driver now you computer allready recognised your device, so:
the solution is to delete the device setting under device manager of your
computer [start->control panel->system->hardware->device manager]
now with device manager open and with you ppc not connected:
go to the view tab and check "show hidden devices"
then look for the driver of the ppc most likely under the "Non-Plug and Play
Drivers" but if it is not there look around for the driver
when you find it, you went to delete it by right-clicking on the driver and
clicking uninstall
after you delete the old driver have ActiveSync running and place your ppc in the cradle, and the new driver should be installed by ActiveSync 4.0
if you need activesync 4.0 just tell me and i can give you my sight that i uploded as4.0 and wm2005 in a rar file, by the way...most answers are being found on this topic http://forum.xda-developers.com/viewtopic.php?t=18584&postdays=0&postorder=asc&start=0
re:
To rooschool: I did what u suggested but same...
To Destroyer7337:
I didn't connect the ppc before the active sych, I raid this topic before I tried wm2005, I took all the precautions u mentioned, but to no avail, any way I downgraded to 2003se bu I cannot synch with all versions of activesynch
Driver?
What is the name of the driver? I can't find anything in non plug and play and I'm not sure what I'm looking for.
Ryan
Hello.
Finally I finished the installation of w2k5 in my XDA II. But now I´ve got another problem... To syncronize the XDA II with the computer, it´s needed to use ActiveSync 4.0, but to installate it, it´s necesary the latests service pack at the windows of your system... This is the problem... which is the service pack that I exactly need? Cause i tried to install service pack 2, but I can´t ( everybody knows why I cant... my windows it´s... not so legal as Microsoft would...)
Please, some help!
SCSSSD.
sp2 is required as far as i know
SP 1 will also do...tats wat they say in their compatibility list, but not sure if sp1 should b updated or not, try installing the activesync n see
Ok. I finally did it upgrading to SP2. The problem was that my validation key was not correct ( everybody knows why ) but I found some ways to solve it
Now it works, I can syncronize it via Infrareds but I can´t do it via USB (I have wrote it down in a new post...)
Best Regards
im wondering if any1 has the cd that came with the t-mobile mda....the cd with the drivers and the activesync...if any1 has it please post it...in iso form...or just all the stuff that is on it...
CDs are generally useless IMO, I would recommend going to the Microsoft website to get the latest version of Activesync and your provider to download any official updates for your device.
Of course you wouldn't be here if you weren't interested in cooked ROMs.
well let me explain my problem...i have windows vista and cant update because it isnt compatible but i got a virtual pc and it sayes that i should use the cd...to get the drivers for the t-mobile mda...cuz i already have the activesync...buti need that installed...
killacam13 said:
well let me explain my problem...i have windows vista and cant update because it isnt compatible but i got a virtual pc and it sayes that i should use the cd...to get the drivers for the t-mobile mda...cuz i already have the activesync...buti need that installed...
Click to expand...
Click to collapse
Get ActiveSync direct from Microsoft. It will install the USB drivers needed to sync with all supported PDAs and SmartPhones. You don't need anything else... besides Outlook to sync the contacts, etc.
ok ty ill retry
vista's activesync is build it, dont worry about it, it should just automatically install the nessesary stuff
mda cd tmobile
..i found it....may be a little late...still interested
Hi mates
Im new in sgs2, i want to install all drivers without useing kies
i download samsung_drivers but the phone not detected on odin!
can any1 here help me to do that ?
THANKS
Install Kies for USB drivers .
jje
i know that, but i cant install that.
setup want to download .net framwork... and i dont have high speed internet connections
Try this: http://forum.xda-developers.com/showthread.php?t=961956
Its from the i9000 forums but it's the same usb drivers. It's the one i use, and always have a copy of it on my sdcard to install anywhere.
Let me know if the link on that post works, I'm not able to verify as mediafire is blocked at the office.
I have the i9000 drivers but nor works
Try this link, it's what I used, so I stored it in my Dropbox for easy access anywhere
Here you go
Hi xda,
I am glad to be here and to know this site, almost for masters! (which I am not)
Guys, I just want to know if anyone have or had my same issue with the bluetooth when I connect my HTC HD2 to my PC for listening the music, same like in the car.
No matter which ROM I installed, T-Mobile 3.14, Custom or any stock I can't connect via Stereo Audio to my pc.
I can transfer files, I can navigate into my HD2 via bluetooth BUT when I try to connect via Stereo Audio it fail, please see the attachment.
I also can't use audio via Hands-free, practically I do everything but without Stereo Audio.
I already installed update for my bluetooth on my PC.
I try to fix this problem all month and I realized the problem are the drivers on my phone (or ViceVersa ), because if I use Android with my HTC HD2 it works.
I use most of the time WM 6.5 and I want to connect to my car stereo or PC via bluetooth to listening the music but I have this problem.
Nothing helped me jet and I do not find any fix of any kind so my question is if there is any fix for this problem?
Please help, I appriciate if some one can help me.
Thankx.
..no solution? :crying:
No fix at all? Why?
:crying:
Uhaaa, Uhaaa, uhaaaaaa :crying:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Mister B said:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Click to expand...
Click to collapse
oh, Mister B, I start to like you!
This issue was wrote some where and few people know about it but nobody said how to fix this.
I used my old HTC Diamond 2 via bluetooth to listening music on my laptop with speakers but somehow with HD2 it is impossible, and supposed to be "newer" than diamond.
I can connect stereo audio with my HD2 after run Android, so basicly this issue is some driver or something like that in my ROM.
To be sure I also tried Stock ROM and 3 different ROM and All of them have this issue. I just don't know where to look.
I can live with this but I can't believe there is no fix for this, that's why I can't slipping in the night!
Let me know.
Cheers.
I just want to say this, I use all the time Windows Mobile 6.5 and sometime Android, so I will be glad if this issue will be solved on my WM6.5......
Problem with HD2 BT was mainly due to change of BT stack manufacturer thus a few new driver issues that never really got worked out fully.
Once I got some time free & am at my work PC I will run through it & see what results I get.
I'm on WM6.5.3 as in signature ...
Well I put work on hold & had a play, works fine for me on 6.5.3 & windows 7 Notebook with built in BT module.
I got same initial issue as you with 1 driver error, I tried correcting from device manger by checking windows update with no result & then manually searched whole of C:\ drive for driver with no result.
I then looked in folder with our HD2 files (company using over 20 HD2s at present) & found Bluetooth driver zip file.
unzipped them to desktop & went back into device manager & manually searched driver, got disc option & choose inf file on desktop & it installed fine.
reconnected bluetooth between HD2 & Notebook via bluetooth options on HD2 & selected stereo audio & then tested by selecting some music to play on my HD2 ...
Result was some rather loud music blasting out of the notebooks rather good Altec Lansing speakers & my Boss fully aware of my poor work ethics :-S
Couple of screen shots below & the bluetooth driver files in a zip archive.
May take a bit of messing around to get driver installed or perhaps deleting any current Bluetooth partnership & starting new but result should be worth it
Picture shows ActiveSync connected which it was via WMDC at time, I also tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Mister B said:
Well I put work on hold & had a play, works f...........
........................................ tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Click to expand...
Click to collapse
Sorry but this time I am unlacky.
I did like you said. First of all I uninstalled all bluetooth drivers and devices from my lap. I rebooted and the pc compleated the reinstall of basic bluetooth option with no error. So I put on desktop the zip file which you give me and I extract the driver to a folder. I connected the phone via bluetooth and like all the time I got the error of the peripherial drive missing. So via Device Manager I finded the Bluetooth Peripherial Device and I manually selected to Update the driver, Browse my computer, Let me pick up...., Have a disk, Install from disk, and I browse to the folder where I extract the driver from your zip and I can't install it. See the attachment.
I got Windows 7 with WMDC, my bluetooth hardware on laptop is Broadcom, my HD2 rum WM 6.5.
I don't know what is going on with this stuff.....
PS: I hope you do not risk your position at work to have fun with this stuff....
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Mister B said:
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Click to expand...
Click to collapse
Windows 7 32bit,
the WMDC is update already and work fine,
the manufacturer Broadcom webside do not update or fix the driver for my hardware Broadcom, I allredy did and I downloaded the app to update the Broadcom hardware and the app saing "We can't update your hardware" I said WHAT? F..k you! I read about this somewhere and the responsibility is the manufacturer of my laptop, SONY, so for all of them there is not any issue with this hardware bluetooth, and I think they are right.
.cat file is not on the list because when I serching for the driver, the only one which the hardware need is .inf, .inf is linked to .cat, if this link in your driver, which you give me, is broken or lost, I can't do anything about it. I got only this two files, .inf & .cat.
What I think, like I said few post before, is not the problem of my laptop (Sony Vaio FW21M) but is with the drivers into the HD2, because when I use Android no problem at all. If my laptop was the problem I will never connect anything via stereo audio via bluetooth.
Also you do not mentioned which ROM you using on you HD2, is not the same as mine so there will be the difference. The difference is into the ROMs.
Probably this issue have to be forced via registry or via .cab with some fix or driver but no luck at all at the moment and I can't believe is just ME.
PS: Thanks for help me anyway! I allredy clicked on thanks for you!
..and please, if you find something for my case, please, let me know ASAP!
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Mister B said:
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Click to expand...
Click to collapse
Well, my is much older, CRACING WM 6.5 OS 21889,
Ok, so this error during the installation is weird? or is a manual installation techniques isssue :angel:, so it's me.
Can you, pleasee, explain to me step by step how to do the update of the driver from your zip, pleasee...
I want try again, I can't give up! Perhaps I did something wrong.
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Mister B said:
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Click to expand...
Click to collapse
I did all what you said and all the same, my anti-virus is fine and the file still in the folder and also I put them in C:\,
Always the same error.
Few weeks ago I also saw the forum about this issue and I try to follow the instruction from the webside, same which you give me, but like many I do not have "Microsoft Corporation" on the list of drivers with "Windows Mobile-Based Device Support". (and I do not have AMD, but Intel)
And there is no highest update of WMDC 6.1, still all the same last version.
My drivers of my laptop much udated than now can't be.
Ok, I give up, this stupid Scientists and Engineers made Hi-End stuff whit issues and no solution for it.
We can't do nothing about it.
Problem solved!
If any one had and have right now this problem and need a solution this is the right place!!
I find the solution, was the Mobile Radio 2.15.xx.xx_x.
Yes, I solved the problem after months of pain and tests.
I downgrade the radio to 2.08.50.05 and all working now, from first play, even Android, amazing.
Thanks for all the support.