Related
ok my phone is HTC 8525, with WM 6.1 professional . It worked fine for 3 days then it start freezing , before it does that a blue background will appeare ,then it will not let me do anything at all . When I try to touch an icon, it will say something like invalid location or could not find target . I have to hard reset it. sometimes I have to reset it 4 or 5 times a day . , In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ? please help me I truly appricat it . In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ?
Hmmm, "the mini card will freeze the whole phone"??? Are you referring to the SD Storage Card? Do you have any volatile data stored on the card? Any Today Screen Applications?
If this is the case, try shutting off the phone and removing the card. Then place the card into a card reader, and plug it into your PC. Make a folder on the desktop of your PC, and COPY all the contents of the SD card to the folder.
Now, reformat the SD card in your PC, as FAT32, and default for all characteristics.
Once reformatted, copy all that stuff back onto the SD card from the temp folder on your desktop, making sure everything is returned to it's original locations. Pop the SD card back into your phone and see if it's fixed. Sometimes, corrupted space on the SD card will make the phone behave very badly. Hopefully, this procedure might fix it for you.
-pvs
Yes Sir, i apaologize , i was refering to the SD card . i am just tierd resetting the phone every 4 hrs . do you recomend any shops that can fix the soft -ware . i notices when i start the phone and i go to clean tmp it will say" 8 Fils and 4 folders of 656 Bytes cleard ! . then 5 hrs later the blue screen comes back
After doing what pvs said, and if you still have problems I'd check for bad blocks with MTTY... I would also ,after confirming no bad blocks, would flash a stock rom then reflash wm 6.1 and see if that helps... Cheers...
Wow , how to do all that if you dont mind me asking , actually i took the SD card out i am not in need for it at the moment . can you please help me to do what you said and i truly appreciat it , Great thanks for both of you gents
pvs already says what to do in his previous post...
To check for bad blocks follow this : http://forum.xda-developers.com/showthread.php?t=377389
To Flash a stock rom you need to know what carrier the phone was on. Download the wm6 update from their site and, Making sure you have Hard SPLed your phone, I suggest flashing via the sd card method. Its safer than flashing through pc.
Format sd card fat32. copy .nbh file of the stock rom (you may have to search for it) onto the sd card and rename to "hermimg.nbh". Put back in hermes and reset to bootloader (power button, OK button above flywheel and soft reset with stylus. Hold all buttons until it goes to tri-colour screen). It should recognise the os flash and load up a screen showing 1st boot screen, 2nd boot screen, gsm And os (or something like that as cooked roms don't generally have the gsm part). MAKE SURE YOU HAVE AT LEAST 50% BATTERY!!!!! Follow the prompts... I generally use the sd card method to flash ALL my roms so I don't have problems like usb disconnecting or pc rebooting/hanging or power failures.
Hope this helps you out, Cheers...
BASELABBAS ... Please describe what you are doing when you say that you are "HARD-RESETTING" several times a day. Are you:
1) poking the stylus into the hole at the base of the unit?
- or -
2) holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]?
If you are doing the first ... this is called a SOFT reset. The second is a HARD-RESET, and will wipe the phone clean of ANYTHING outside of what came with the ROM itself.
Since you have posted that you already removed the SD Card from the device, and can (for the time-being) live without it, I recommend you do an ACTUAL Hard Reset (backup anything you need to keep first) via step #2 above, and then be patient about installing any apps. I wouldn't do anything more than sync it up via ActiveSync with your contacts for the first few of days. If things start to go crazy without any third-party apps installed, then I would look into the steps that ultramag69 has suggested ... starting with a flash to a stock ROM.
WM6.1 has been a bit shaky on our Hermes thus far. Some people are getting good results, but a lot of others are having issues like you are describing. I would suspect that your ROM might not be a good match, before I'd suspect bad blocks at this point (and it's a bit easier to test for).
If the stock rom does better on your device, you can try flashing back up to a WM6.1 ROM after that. And if you haven't already, make sure that you have installed HARDSPL before doing any of this stuff.
Good luck,
-pvs
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]. I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
it looks like i need to update
this what is say
From :
Image Version : TNT.19199
to
image version 2.05.255.1
BASELABBAS said:
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR].
Click to expand...
Click to collapse
OK, well that's definitely a Hard Reset. So your WM6.1 Rom is acting flaky right aftwerwards, eh? I would say it's time to try a different ROM, as we've been discussing above.
BASELABBAS said:
I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
Click to expand...
Click to collapse
No ... try Hard-SPL-V7.zip found at the bottom of THIS PAGE. I THINK you can flash it via the SD method if ActiveSync isn't working for you (if not, somebody please correct me). To do this, open the downloaded ZipFile with WinZip or WinRAR and copy the file inside named RUU_signed.nbh to your desktop. Rename it HERMIMG.NBH, and copy it to the root of your freshly reformatted (FAT32) Storage Card. Put the Storage Card into your device and press the side OK button and the power button simultaneously while resetting with the stylus until the tri-color screen appears and turns white. The device will find the HERMIMG.NBH file and offer to upgrade by pressing the Power Key. This will install HardSPL onto your device without the need for ActiveSync. You can also flash ROMs in this manner.
Again, good luck,
-pvs
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
ultramag69 said:
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
Click to expand...
Click to collapse
Thanks for checking me on that, Ultramag. I had a feeling there was something I was forgetting.
-pvs
Ok so first is first.. I did read the wiki and I have searched.. even posted in a rom 3.42.50 post (i think that was it) but no replies...
so in that other post I followed the instructions.... I used a 512mb micro sd and a 64mb micro sd....
jambrose said:
FROM THE TITAN WIKI:
Flashing a phone with a micro SD card
1. With a card reader on your PC, format a non-SDHC (<=2GB) microSD card into FAT32 (tested to work up to a 4KB cluster size)
(the default size for a 1 GB would not work, also if it takes only a few seconds to format
try formating with some other slot/device. A 1 GB took over a minute to format correctly)
To format your Card - Open a DOS box and type/copy and paste this: ( format ?: /FS:FAT32 /A:1024 )
Replace the ? with whatever your SD cards drive letter is... ie: f, h, I.... Mine is G....
2. Copy the ROM to flash (xxxxxxxx.nbh) to the root of the microSD
3. Rename the ROM xxxxxxx.nbh to TITAIMG.nbh
4. Insert your card.
5. Force into the boot loader with POWER-CAMERA-RESET
6. Follow the instructions and you'll quickly flash your Titan...
7. You may have to soft reset once it says the update is complete
(If you are using UC let the customizations run so it will read the SDConfig.txt file)
This will work to flash with an official ROM and radio, I think regardless of the boot loader you have installed. But ensure that you have the correct boot loader (olipro 2.40 for this GPS ROMs) installed for when you do eventually finish with your flashing and are ready to boot into the OS.
Click to expand...
Click to collapse
so i have been trying this for a while tonight.. cant get it to work...
I am getting the Loading... screen.. all grey but that is it...
512mb micro sd... TITAIMG.NBH file exists...
any ideas??
I did not install olipro 2.40... should I??
alot of views but that is it..... hmm...
ok I installed nueSPL-2.47
so now it says.,.
TITA100
SPL-2.47No2Chem Titan SPL EVT CPLD-9
still cant get it...
now trying to boot to upgrade the rom I get the reg, green, blue, white part of the screen... and it says serial....
can anyone help me???
it sounds to me like you have nueSPL installed correctly.
In the past I have had problems with formatting sd cards, the only reliable way I have found to format them so that they work for flashing roms is to use the nue format utility... it is up somewhere on nuerom.com
It will erase everything on your card, so back it up first
after the card has been formatted, copy the "TITAIMG.nbh" file to the root of the card
Put the card in your phone and reboot into bootloader mode
it should detect that there is a rom image on the card and ask you to press the power button to continue.
The flashing process takes about 1 minute to complete (so much faster than using activesync)
Once everything is done it will say something like "process complete", and then you soft reset and you are done
which rom are you trying to install?
mpenguin14 said:
which rom are you trying to install?
Click to expand...
Click to collapse
yeah was weird... on about the 12th try of doing so much... copy rom, format, etc... eventually got it...
so which rom....
now I am ready for recommendations on this...
Here is what I use my phone for..
1. Phone - duhhhhh
2. GPS - Big time use....
2.a. Speedometer for my pickup truck... gpsspeedometer.exe
2.b. iGuidance
3. few games
4. Sirius radio via wifi
I do not have a data plan.... was going to get one soon but just bought a 2008 silverado z-71 crew cab.. so car payment is a bit much... so dont want to fork out the extra on a data plan.....
I have to check again but I think this is the one im going for...
Titan M2D Round 4 ROM (DCD 3.2.6 and TouchFlo 2D)
my biggy was getting the radio upgraded more importantly for better GPS... however I have got it to sync yet.... well im inside the house and cant get it to sync... raining outside too....
TeleFragger said:
yeah was weird... on about the 12th try of doing so much... copy rom, format, etc... eventually got it...
so which rom....
now I am ready for recommendations on this...
...
I have to check again but I think this is the one im going for...
Titan M2D Round 4 ROM (DCD 3.2.6 and TouchFlo 2D)
Click to expand...
Click to collapse
I am glad that you were able to get it working. I enjoy flashing different roms, but am not really a nit-picky user.
I fonally donated to no2chem today so that I can use his nueRom3-pre3, it is a pretty nice rom that gives you the option to disable your camera and get an extra 8 MB in free ram, I am also really liking the nueWifiSwitch. But like I said you have to donate to get the rom, and I have only been using it for 6 hours or so.
before that I was pretty much exclusively on a custom build of DCD 3.2.6, just a bare minimum rom, which I like because I flash quite often.
It does seem like people are liking the "Titan M2D Round 4 ROM" a lot. It looks pretty good, in fact it even includes a program that I made, Manilla 2D Customizer, which will let you tweak Manila 2D and apply some themes.
Good luck, and I hope flashing your rom via SD card goes a little bit smoother than your radio flash
Hi there
i had a Big Problem last night just for me
Now my Old Gene doesn't work with any computer ?? (( what do u mean ))
when i plug my device to any computer it recharge the battery only . nothing else
but before that lets say 5 min ago ,it was working like the Clock .
any advice ?
i tried to uninstall and install the latest of WMDC but nothing happened .
meanwhile , my father have the same one and it works perfectly .
one guy told me to flash any ROM from SD < How?
Please help me
Verify the usb cable. Sometimes it does not fit right in gene.
ramersonw said:
Verify the usb cable. Sometimes it does not fit right in gene.
Click to expand...
Click to collapse
thanks man for ur comment
by theway , how can i flash ROM from SD card ? can you help for this pls
still need help
I don't have the right way to flash via SD. I'm still looking for a solution that works well on all genes. But you could look in helgees's wm6.5 thread. Some users have succeeded in this method.
Apart from what Ramerson said, flashing for SD is required only if ROM is less than 55 MB in size which is the minimum size to flash from RUU for GENE.
krazy_about_technology said:
Apart from what Ramerson said, flashing for SD is required only if ROM is less than 55 MB in size which is the minimum size to flash from RUU for GENE.
Click to expand...
Click to collapse
Minimum size does not need less than 55 MB for old gene flashing form SD, when you cooking rom , Need ExtROM.nb size greater than or equal to 4M.
Sorry my poor English!
sm7s said:
Minimum size does not need less than 55 MB for old gene flashing form SD, when you cooking rom , Need ExtROM.nb size greater than or equal to 4M.
Sorry my poor English!
Click to expand...
Click to collapse
I didn't said that it needs to be 55 MB. I said if it is less than 55 MB, SD Card method must be used. And i use 4 MB extrom in all my roms but i can always flash from RUU.
Flashing Via SD card
Flashing Via SD card
Spl has to be patched first. Remove SIM also.
1. You need a 256 mb sd, format from pc to fat32.
2. copy GENEIMG.NBH to sd.Thereafter dont put it back in handset until step 5.(remember if u put it back and turn it on ,then folder for mail attachment and other things may come up.)
3. better do a hard reset before flashing.
4. switch off mobile ,thereafter people also advice to take out battery and press power button for about 20 sec to drain battery
5. put sd .,press camera button for 3 sec then press and hold power button untill white display.
6. After white display release both button.
7. U will be told to press power to start downloading
8. press power button ...then it will take some time, wait untill u r being told to press any key,press any key , thereafter press reset thats it
i just need help with upgrading my Radio. i am using the stock sprint radio (what ever the highest one is) and i want to get to .50 but i cant get there. i have tried the card way but i cant seem to get it to work. (i formatted it and wen to the boot loader and it did nothing.) so i want to get to the new radio by usb but have noclue how to go about it.
please help.
Switched said:
i just need help with upgrading my Radio. i am using the stock sprint radio (what ever the highest one is) and i want to get to .50 but i cant get there. i have tried the card way but i cant seem to get it to work. (i formatted it and wen to the boot loader and it did nothing.) so i want to get to the new radio by usb but have noclue how to go about it.
please help.
Click to expand...
Click to collapse
If the nbh file that you put on the sd card is not named to TITAIMG.nbh (not TITAIMG.NBH) then it will not work. NO caps on nbh.
I believe the file on download is all caps.
i did not do that so thanks for replying but it still did nothing. it just stays at the multi colored screen. do i have to wait till it starts or should it start right away.
Switched said:
i did not do that so thanks for replying but it still did nothing. it just stays at the multi colored screen. do i have to wait till it starts or should it start right away.
Click to expand...
Click to collapse
Maybe posting some more info on what you did would help.
1 sd card has to be 2g or less
2 formatted to FAT32 with 1024 allocation
3 nbh file has to be straight in root of card (inside NO folders)
4 name of nbh file is TITAIMG.nbh
5 enter bootloader and follow grey screen instructions(does not take long to start if everything is correct)(I have had to reenter bootloader while I was in bootloader before.)
Another question are you running stock rom as well with stock bootloader?
thanks agian for all the help. i really dont know if i am formatting it right cause i just do it by the copputer way. (opening my computer and right clicking going to format and hiiting format on FAT32) i have a 1gb card so it is not that so i will try. one thing, does it come up on the screen or do i have to have it connected to the computer?
oh and i am running a dcd ROM (3.2.6) with tthe latest stock radio from sprint.
thanks you for responding
Switched said:
thanks agian for all the help. i really dont know if i am formatting it right cause i just do it by the copputer way. (opening my computer and right clicking going to format and hiiting format on FAT32) i have a 1gb card so it is not that so i will try. one thing, does it come up on the screen or do i have to have it connected to the computer?
oh and i am running a dcd ROM (3.2.6) with tthe latest stock radio from sprint.
thanks you for responding
Click to expand...
Click to collapse
No usb hooked up to phone while flashing sd method. When you enter bootloader it will open a grey screen saying loading and then it will tell you to hit the power button to continue. When it is done it will say update complete and all you need to do then is hit the soft reset button. Don't forget to take the nbh file off card when done.
wow...that was fast. ahha. i will try this when i get home. now i am at school so i cant format it right now. but how do YOU format it. nto haow to but how you do it. thanks.
Switched said:
wow...that was fast. ahha. i will try this when i get home. now i am at school so i cant format it right now. but how do YOU format it. nto haow to but how you do it. thanks.
Click to expand...
Click to collapse
simply place the card in pc
In file explorer right click on that device and hit format.
It open a screen to let me set what I want.(fat, Fat32, ect.)
When I like my settings I hit start.
It is that simple.
good luck
so it will always do the 1024 allocation? cuase if not then i think that is my problem.
Switched said:
so it will always do the 1024 allocation? cuase if not then i think that is my problem.
Click to expand...
Click to collapse
I can change to what ever allocation I want before I hit start.
Can you not change that?
you must be using xp.
I do believe on xp FAT32 is defaulted to 1024 (but not sure)
mattsm said:
you must be using xp.
I do believe on xp FAT32 is defaulted to 1024 (but not sure)
Click to expand...
Click to collapse
yeah it just goes to the default which i cant shange so i would hope it is 1024 allocation.
sorry but i really need help with this. it just wont flash the new radio. i have a PNY 1gb card. also does the Justpctech 21501 Titan ROM 6.5 Rom need 3.42.50 radio? cause if not i want to just try to flash to that.
my HTC HD2 keep flashing on HTC green logo here's the thing i did before this happened:
1) after having hanged most of the time because of having full internal memory (holding power button "HARD RESET")
2) holding power button and enter into the 1-10 options i dont know what you guys call them but there is a 1-10 option and what i did was do the factory reset and ask me to wipe all the files and hit ok, and some running deleting and i dont know what to call them then it reboot then suddenly it just keep restarting on HTC green logo.
i actually go to the other shop that they said they can repair this kind of problem and i watch them on their computer they just keep searching and posting on the other site asking for help so i said to the technician, we're wasting both our time waiting for your help in the other sites so ask them can you give me back my phone pls. and here i am found the XDA forum so decided to register and look for your genius help i know you guys are pro when it comes to this kind of problem can someone help me pls this phone is all i got, got no money to buy another phone this is like a treasure to me since i dont have a job,
PLS PLS PLS help with this some say i need to reflash? i dont know how or what should i do.
Thanks in advance guys.
any comments is highly appreciated!
info
additional info
using android 2.3
T-Mobile
i read some forums that should i back up first before doing the factory reset using the 1-10 option i somehow factory reset without having a back up of it i thought its just ordinary factory reset
someone help me pls
i will give you any information that you needed in my HTC as long as you help me how to do it im totally noob.
I think you have a nand rom if so tr doing a clean install.
1. Flash a stock WM6.5 rom
2. Flash magldr (which i think u have) or BlackCLK (I personally prefer this for android on NAND and if not dualbooting)
3. Find a cool rom in the NAND section, Flash it and enjoy.
Let me know if you need more info.
reflash with stock rom t-mbole,
folow of procedure how to flash it,,.
Suhaib10 said:
I think you have a nand rom if so tr doing a clean install.
1. Flash a stock WM6.5 rom
2. Flash magldr (which i think u have) or BlackCLK (I personally prefer this for android on NAND and if not dualbooting)
3. Find a cool rom in the NAND section, Flash it and enjoy.
Let me know if you need more info.
Click to expand...
Click to collapse
THanks for your very helpful reply sorry for being noob what is stock WM6.5? magldr or BlackCLK? cool rom? I think you have a nand rom if so tr doing a clean install? what is TR? help me pls i need a step by step guide? i really appreciate your reply this means to me thanks.
Before you start READ THIS. The default os the HD2 comes with is known as Windows mobile 6.5. The developers at XDA have managed to make android work on this device using special secondary bootloaders which need to be flashed(installed) on the HD2.
There are two of them, one is MAGLDR made by cotulla which is the one you have i think (the numbers with options when it starts) the other is CLK which is open source. These bootloaders allow you to boot an Android rom (the os).
Before we start download and install Windows mobile device center on your PC. Once done follow the steps.
Step1 - WINDOWS MOBILE
a. First we are going to put the HD2's default os WM6.5 (THIS WILL ERASE EVERYTHING) Download this
b. Turn off your phone, hold the volume down and power button until it shows a screen with three colors (Bootloader).
c. Connect your phone to the PC (Where it says SERIAL on your phone it should change to USB) and run the file you downloaded in "a" and follow the instructions it says.
d. The phone will reboot after the process and boot the os.
Step 2 - secondary Bootloaders
Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on.
This where you have 2 options one is MAGLDR and the other is CLK (I prefer BlackCLK since you can easily congfiure it to modify the sizes of system and data without a PC). If you'd like magldr try this video it should help
BlackCLK - Download
a. Format an SD card and copy the LEOIMG.nbh from the zip to SD.
b. Put it in the HD2 and boot into the tri colored screen.
c. It should say something to flash it, follow what it says.
d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select
Since you have t-mobile you have enough storage space unlike european hd2
so we'll skip dataonEXT (basically moves data to a secondary partition on your sd) if you want it let me know.
INSTALLING android
a. Find a nice rom (os) in the android nand section since you were on 2.3 you can continue with it or try 4.2 (jellybean) rom Good fast roms are pixelfreaks, nexushd2(from tytung) or most of the older 2.3 roms.
b.1 Once you find one you like download it and copy it (the .zip file) to your sd and put it in your hd2.
b.2. Each rom has size requirements for system and cache (it says it on the thread for the rom).
c. GO to settings ---> resize partition set system and cache according to required by the rom save/apply it. go back format nand. then reboot
c. go to recovery, once loaded click install and choose your rom and follow the instructions it says.
d. reboot and you should be good to go.
Suhaib10 said:
Before you start READ THIS. The default os the HD2 comes with is known as Windows mobile 6.5. The developers at XDA have managed to make android work on this device using special secondary bootloaders which need to be flashed(installed) on the HD2.
There are two of them, one is MAGLDR made by cotulla which is the one you have i think (the numbers with options when it starts) the other is CLK which is open source. These bootloaders allow you to boot an Android rom (the os).
Before we start download and install Windows mobile device center on your PC. Once done follow the steps.
Step1 - WINDOWS MOBILE
a. First we are going to put the HD2's default os WM6.5 (THIS WILL ERASE EVERYTHING) Download this
b. Turn off your phone, hold the volume down and power button until it shows a screen with three colors (Bootloader).
c. Connect your phone to the PC (Where it says SERIAL on your phone it should change to USB) and run the file you downloaded in "a" and follow the instructions it says.
d. The phone will reboot after the process and boot the os.
Step 2 - secondary Bootloaders
Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on.
This where you have 2 options one is MAGLDR and the other is CLK (I prefer BlackCLK since you can easily congfiure it to modify the sizes of system and data without a PC). If you'd like magldr try this video it should help
BlackCLK - Download
a. Format an SD card and copy the LEOIMG.nbh from the zip to SD.
b. Put it in the HD2 and boot into the tri colored screen.
c. It should say something to flash it, follow what it says.
d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select
Since you have t-mobile you have enough storage space unlike european hd2
so we'll skip dataonEXT (basically moves data to a secondary partition on your sd) if you want it let me know.
INSTALLING android
a. Find a nice rom (os) in the android nand section since you were on 2.3 you can continue with it or try 4.2 (jellybean) rom Good fast roms are pixelfreaks, nexushd2(from tytung) or most of the older 2.3 roms.
b.1 Once you find one you like download it and copy it (the .zip file) to your sd and put it in your hd2.
b.2. Each rom has size requirements for system and cache (it says it on the thread for the rom).
c. GO to settings ---> resize partition set system and cache according to required by the rom save/apply it. go back format nand. then reboot
c. go to recovery, once loaded click install and choose your rom and follow the instructions it says.
d. reboot and you should be good to go.
Click to expand...
Click to collapse
Thanks for your reply man i really really appreciate this, im gonna try this one my wife want to try the jellybean since its new :laugh: is jellybean a fast rom? anyway how do i know if the file is in correct hash or not corrupted? i read some forums some files are corrupted? what do you recommend me i would like a fast rom instead? does it need a 100% battery?
(Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on) *what should i do if not 2.08 HSPL?
what should i do to know the verison of my HSPL?
i think i should follow your instruction its because its easy to follow rather than the one you hyperlink in READ THIS, is it ok?
too many questions sorry i just wanted to be sure, thanks for your wonderful help god bless!
lloydchristian said:
Thanks for your reply man i really really appreciate this, im gonna try this one my wife want to try the jellybean since its new :laugh: is jellybean a fast rom? anyway how do i know if the file is in correct hash or not corrupted? i read some forums some files are corrupted? what do you recommend me i would like a fast rom instead? does it need a 100% battery?
(Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on) *what should i do if not 2.08 HSPL?
what should i do to know the verison of my HSPL?
i think i should follow your instruction its because its easy to follow rather than the one you hyperlink in READ THIS, is it ok?
too many questions sorry i just wanted to be sure, thanks for your wonderful help god bless!
Click to expand...
Click to collapse
If you do not have HSPL2.08 (most likely you'll have it since you already had MAGLDR) you should Flash HSPL 2.08
Well not quite sure which rom is the best but, i have tried Pixel freaks AOKP and Slim ROM, they both are 4.2.2 and were pretty good but you'll have to find one which suits you.
Suhaib10 said:
If you do not have HSPL2.08 (most likely you'll have it since you already had MAGLDR) you should Flash HSPL 2.08
Well not quite sure which rom is the best but, i have tried Pixel freaks AOKP and Slim ROM, they both are 4.2.2 and were pretty good but you'll have to find one which suits you.
Click to expand...
Click to collapse
sorry again i just want to be sure i dont want to mess my cellphone, i think i should follow your instructions its because its easy to follow rather than the one you hyperlink in READ THIS, is it ok?
is there a way to view what my current HSPL? i tried this one holding power button and volume down button this is how it shows
PB81120 HX-B3
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x40
so should i start now the process that you told me?
if i do this does it delete the amagldr?
and also d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select? (if i reach it'll say something cannot be found and go to menu? it means i did something bad? or its normal to reach on that scenario?)
The READ THIS part was for Basic Info.
Yeah your HSPL stuff seems fine
And yes it will remove MAGLDR and in the end youll eventually be using clk (latest one which i put the link for is CLK 1.5.x.) I dont think it'll matter that much since you aren't dual booting (WP7 and android) and have android on NAND(The phone itself). If you want to use MAGLDR over CLK follow the video and Not the CLK part
should i start now?
so should i start now the process that you told me?
i read the some info in clk does it auto configure by default?
"Changed some options under SETTINGS.
Added option to use inbuilt off-mode charging under SETTINGS/SET DEFAULT OFF-MODE CHARGING. From that menu you can select it (option USE INBUILT OFF-MODE CHARGING) and try it out.
If using inbuilt off-mode charging the device wakes up if you press POWER [button].
This is an experimental feature! Only tested with original battery and charger.
High Voltage (as measurement) is set to 4.2 V. Use at your own risk! Otherwise stick to the default way of charging (option USE RECOVERY'S OFF-MODE CHARGING).
Usb detection function changed (option under SETTINGS/ENABLE USB DETECTION). "USB" mark at the bottom of the screen if device connected to pc is replaced by turning led on/off if connected/disconnected.
Added some code as an experiment for a potential off-mode alarm application.
More info in this thread.
Warning : I didn't know java or how to use eclipse and make an android app. Seriously, I still don't. But after some days I managed to write this application mostly because I wanted to know if this idea was possible. So consider it as an example. Any criticism accepted. I just hope that someone may find it useful and make the best out of it."
i dont want to take the risk can you help me configure it to "ALL" default? i know you 're the one who can help me.
<in your previous post what do you mean by this?>
and also d. Once done reboot. it'll say something cannot be found and go to a menu. "if your reach it YAY". Volume keys to move and green key to select? (if i reach it'll say something cannot be found and go to menu? it means i did something bad? or its normal to reach on that scenario?)
thanks man each time you reply you educate me.
should i start now?
Suhaib10 said:
Before you start READ THIS. The default os the HD2 comes with is known as Windows mobile 6.5. The developers at XDA have managed to make android work on this device using special secondary bootloaders which need to be flashed(installed) on the HD2.
There are two of them, one is MAGLDR made by cotulla which is the one you have i think (the numbers with options when it starts) the other is CLK which is open source. These bootloaders allow you to boot an Android rom (the os).
Before we start download and install Windows mobile device center on your PC. Once done follow the steps.
Step1 - WINDOWS MOBILE
a. First we are going to put the HD2's default os WM6.5 (THIS WILL ERASE EVERYTHING) Download this
b. Turn off your phone, hold the volume down and power button until it shows a screen with three colors (Bootloader).
c. Connect your phone to the PC (Where it says SERIAL on your phone it should change to USB) and run the file you downloaded in "a" and follow the instructions it says.
d. The phone will reboot after the process and boot the os.
Step 2 - secondary Bootloaders
Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on.
This where you have 2 options one is MAGLDR and the other is CLK (I prefer BlackCLK since you can easily congfiure it to modify the sizes of system and data without a PC). If you'd like magldr try this video it should help
BlackCLK - Download
a. Format an SD card and copy the LEOIMG.nbh from the zip to SD.
b. Put it in the HD2 and boot into the tri colored screen.
c. It should say something to flash it, follow what it says.
d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select
Since you have t-mobile you have enough storage space unlike european hd2
so we'll skip dataonEXT (basically moves data to a secondary partition on your sd) if you want it let me know.
INSTALLING android
a. Find a nice rom (os) in the android nand section since you were on 2.3 you can continue with it or try 4.2 (jellybean) rom Good fast roms are pixelfreaks, nexushd2(from tytung) or most of the older 2.3 roms.
b.1 Once you find one you like download it and copy it (the .zip file) to your sd and put it in your hd2.
b.2. Each rom has size requirements for system and cache (it says it on the thread for the rom).
c. GO to settings ---> resize partition set system and cache according to required by the rom save/apply it. go back format nand. then reboot
c. go to recovery, once loaded click install and choose your rom and follow the instructions it says.
d. reboot and you should be good to go.
Click to expand...
Click to collapse
i just want to ask which folder should i put the LEOIMG.nbh?
what format of sd card? fat32?
what version of clk that i shall download? stable, legacy or experimental?
which one should i download?
Quote:
cLK (source code)
Experimental
Stable
Legacy
Quote:
ppp wrappers (source code)
0.8b4
0.8b5
where do i download the new clk version?
thanks man
The default CLK settings are fine as they are, the only things you will need to change will be the the partition sizes (system and cache depending on the rom).
Put LEOIMG.nbh on the root not in any folders
Sdcard should be formatted FAT32
CLK Experimental (Although its pretty stable). The latest version is the one i have put the BlackCLK download link for.
Suhaib10 said:
The default CLK settings are fine as they are, the only things you will need to change will be the the partition sizes (system and cache depending on the rom).
Put LEOIMG.nbh on the root not in any folders
Sdcard should be formatted FAT32
CLK Experimental (Although its pretty stable). The latest version is the one i have put the BlackCLK download link for.
Click to expand...
Click to collapse
you mean just copy the LEOIMG.nbh in sd ok, just in the root of the sd what formating tools?
why do i need to change the partition size i read in forum the minimum is 220mb? is ok?
thank you bro
Just regular format the sd through windows fat32.
The Partition size thing is for the PHONE not the SD. Each rom requires different SYSTEM sizes, like for example even though the minimum is 220mb you might want to add more in case you plan on adding stuff to system like GAPPS (Google apps) or any mods.
The reason for this is because even though your phone has 1gb Storage internal you will need to tell it how much each part of it should be used by system, cache (some is used by the recovery) and the remaining will be DATA( where your installed apps go).
When you first put CLK it will have some other system size (150mb i think) set so you'll need to change it.
Sorry forgot this part in the main guide. But if you want to increase you storage you will need to partition your sd card in the recovery before you flash your rom. First partiton -Fat32 and second as partition as EXT4, the size of your EXT4 will be added to your phone and will be counted as internal storage and then while flashing the rom choose with DataonExt. If you dont really care about this just ignore this.
P.S. Ohh in the rom installation IF it asks for PPP or RMNET choose PPP, RMNET is only for MAGLDR.
Suhaib10 said:
Just regular format the sd through windows fat32.
The Partition size thing is for the PHONE not the SD. Each rom requires different SYSTEM sizes, like for example even though the minimum is 220mb you might want to add more in case you plan on adding stuff to system like GAPPS (Google apps) or any mods.
The reason for this is because even though your phone has 1gb Storage internal you will need to tell it how much each part of it should be used by system, cache (some is used by the recovery) and the remaining will be DATA( where your installed apps go).
When you first put CLK it will have some other system size (150mb i think) set so you'll need to change it.
Sorry forgot this part in the main guide. But if you want to increase you storage you will need to partition your sd card in the recovery before you flash your rom. First partiton -Fat32 and second as partition as EXT4, the size of your EXT4 will be added to your phone and will be counted as internal storage and then while flashing the rom choose with DataonExt. If you dont really care about this just ignore this.
P.S. Ohh in the rom installation IF it asks for PPP or RMNET choose PPP, RMNET is only for MAGLDR.
Click to expand...
Click to collapse
oh ok thanks for this wonderful info.
you mean it is rooted automatically?
is it ok if im only using 2gb sd?
and what if i want to repartition the sd card anytime?
All hd2 roms are rooted.
2GB for what, DataonExt?(for data one ext to work youll need to have a second ext partition)
well its best to do it before installation and choose that option while installing the rom, if not you can do it after but it sometimes doesnt work with some roms. You can partition the sdcard later ( so with 2 gb youll want to make 1 gb ext and the remaining 1Gb will be your ext or whaterver is left), but then youl have to flash a dataonext zip (the v2).
But its best to do this before hand althought the best option for tmobile hd2's is just nand (without dataonext,, data onext is usually for EU hd2's since they have smaller storages.), also to use dataonext it needs a fast sdcard otherwise it can slightly slow down the rom(cause the apps will be running of the sd).
Suhaib10 said:
All hd2 roms are rooted.
2GB for what, DataonExt?(for data one ext to work youll need to have a second ext partition)
well its best to do it before installation and choose that option while installing the rom, if not you can do it after but it sometimes doesnt work with some roms. You can partition the sdcard later ( so with 2 gb youll want to make 1 gb ext and the remaining 1Gb will be your ext or whaterver is left), but then youl have to flash a dataonext zip (the v2).
But its best to do this before hand althought the best option for tmobile hd2's is just nand (without dataonext,, data onext is usually for EU hd2's since they have smaller storages.), also to use dataonext it needs a fast sdcard otherwise it can slightly slow down the rom(cause the apps will be running of the sd).
Click to expand...
Click to collapse
my phone has only 576mb (t-mobile) do i have to partition my phone also?
sd card 2 gb.
anyway if i use the partition right after i install the rom the 1 gb isa fat32 and the other 1 gb for ext? so my question is the rom will create the ext system file? because windows doesnt have ext.
so do i have to use this partition thing? its kinda complicated like y ou said im using t-mobile can i skip this partition? or it is necessary to install a rom?
additional info for my phone: sim locked, not yet unlock
can you also help me to sim unlock?
thanks man! God bless!
576mb is RAM which both T-mboile and EU hd2's have, the only difference is T-mobile has 1GB ROM/NAND (the storage) while EU has 512mb.
Just wondering you phone does say T-mobile and has a green call key and red end key right???
First off the phone partition thing is different compared to sd. For the phone look at the system size and cache size required for the rom and resize those in CLK.
Second you can skip the SD partitioning its not a highly required especially for t-mobile I just added that as an extra.
Third Try experimenting you'll never get anywhere if you dont try .
And i have no idea about simlock try googling it
Suhaib10 said:
576mb is RAM which both T-mboile and EU hd2's have, the only difference is T-mobile has 1GB ROM/NAND (the storage) while EU has 512mb.
Just wondering you phone does say T-mobile and has a green call key and red end key right???
First off the phone partition thing is different compared to sd. For the phone look at the system size and cache size required for the rom and resize those in CLK.
Second you can skip the SD partitioning its not a highly required especially for t-mobile I just added that as an extra.
Third Try experimenting you'll never get anywhere if you dont try .
And i have no idea about simlock try googling it
Click to expand...
Click to collapse
my phone it has a green call button to the left and red button to the right but when you turn on the HTC the loading screens are color pink stick together, then it goes to the something says 123456 go go go, then go to HTC queitly brilliant, htc green logo, (in my case it hangs in green logo) lets continue color pink Beats logo, then htc green logo then the regular home screen.
my phone has a t-mobile in front of the face plate near the small speaker when you make a call.
can i skip the dataonext? its kinda complicated
and one more thing after i install the stock rom will the HSPL 2.08 will be deleted?
Thank you very much! God bless!
ps. my internal storage is 500+ only not 1 gb, i dont know if its just locked but im pretty sure my internal memory 569 to be exact i dont know why.
Thanks. God bless!