i searched the forum for 4 days tioo have a clear solution for thos 2 niki100 i recieved the stuck at the operator logo tim from brazil i dont know what my clients did to them but apears the they try to play over upgrading any way im looking for reflashing the same rom to have them back a life again.
i tested many thread posted here buy members i downlaoded many rom that never works with this kind of problem but when i found the mtty command task 2a then boot one of them turnd with a white screen but stell enter boot mode well for peopole how like to help me the spl on the boot mode is
spl 1.21
R 1.58.21.26
G 25.65.30.04H
D 1.35
VENDOR ID TIM BRAZIL
PLEAS GUYS I NEED TO SLEEP ANY HELP FROM EXPERTS WELL BE GOOD AND USEFULL
REGrds to alll
I need this original rom as well, not possibile download from oficial site....Serial number not acepted!!
Phone stuck on operator logo...cant hard spl!!!
is it any of these...
http://shipped-roms.com/shipped/Nike/
DT
Cant see mine R 1.58.21.26....anyway thx!!
theres other way to revive my Niki?
edcentec said:
Cant see mine R 1.58.21.26....anyway thx!!
theres other way to revive my Niki?
Click to expand...
Click to collapse
These are possibly updated versions of your area's stock ROM, the 1.58 radio would be a version 1 ROM, where the 1.65 radio are the version 2 ROMs.
Does it have Hard SPL installed? If not, see if it will install it, then you can install any ROM.
There are other things that can be tried using MTTY, but I am no expert on that - there is a thread on it though.
DT
Could you tell us what you did, I mean did you already tried a hard reset or something simular, and which rom you where using when the phone freeze.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings -‑ the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
To perform a hard reset
1. Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the left side of your device.
2. Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:
3. Release the TALK and END buttons, and then press ENTER on your device.
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, hard reset or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.
Click to expand...
Click to collapse
Greetz,
Related
Here's something weird...
I have an early model PH10A XDA II...
was on ROM 0.81.00 USA
Radio: 1.05.09
Protocol: 1337.10b
Date 8-11-03
I'm trying to upgrade it to the latest i-mate ROM.
I have gotten to the point where it says "The current software is now being erased....the update should take 30 minutes." but the first time...it gave me an error and it asked me to reboot the device and try again...since then...
....it stays there for hours with no update, no errors, or feedback of any kind. All I get on the RUULog.log is "17:24:10 Connection with USB"..then nothing happens...
I have tried re-boots, hard boots, taking the battery out and waiting a few mins, making sure the battery is charged, I'm on XP and the latest Activesync 3.7.1, also I kill the wces...exe. app and still sits there..
I have tried the O2 version, the UK-02-version, himalayaupgradeut_197.exe...all to no avail...
Any other things I should attempt? I'm bootloader 0.23....
I'm still scouring the groups to see if anyone had this problem..
thanks!
re:Weird problem with early model HTC XDA II with 0.23 btldr
Thanks to these posts I can safely say I found a partial solution that works. From other similar posting, it seems the early bootloader 0.23 was a pre-release demo and not for public consumption...so this USB upgrade process does not work for this version.
What worked for me using this bootloader version was a combination of the posting here http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=93&PN=1 - using their choice #3.
1. Download ROM 1[1].72 SD.rar (ROM 1.72)
2. Extract ROM 1[1].72 SD.rar with WinRAR, you will find two files; ntrw.exe and ROM.nb1
3. Put them in any folder; say c:\ROM\
4. Go to DOS command and the folder contains the files
5. Type C:\ROM>ntrw write ROM.nb1 E: (Assume your card reader drive is E as shown in the below figure. Wait until finish writing the rom.
6. Put SD card into your XDAII, go to bootloader mode (Power + Reset + Directional Pad) and follow instruction on your device screen.
However, for this bootloader it definitely wanted a RAW formatted SD card, not a card formatted by XP/2000 card readers. I also tried other devices format Treo 600, etc...but what did the trick was to do a save to SD command using the USB/Serial program ROMUPDATE.exe located somewhere on this board.
This allowed the card to work with the bootloader...
Once this was done...I was able to insert the card on the card reader (and get an error - ingnore since it was raw format)...and type step #5.
Once this was done I was able to boot the device again.
To note..most of the solutions posted here work for public release bootloaders above 1.0...but this was an early release bootloader...and this is how you get this one to work. NOT using USB.
Now the next task is ...how do I upgrade the bootloader?
pda t-mobile mda ph10a
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
removing SD card from device should solve your problem
pedjaar said:
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
Click to expand...
Click to collapse
for hard reset u need not to press the navigation key just press power and reset.
and if this does not help try reinstalling the rom in boot loder mode(serial 1.06).
Hi all,
Hope I may be of help to those who have GSM Error on their Wallabys. I have almost given up hope but I just searched the threads. This is basically what I did:
1. Download xda developers special rom and re-flash via sd card
2. Hard reset, press contact and calendar buttons (or a combination of both), volume button, and soft reset will bring you to the today homescreen (I cant remember exactly what buttons I pressed, I just pressed them all)
3. Re-boot phone, you will notice you still have no radio but you can now enter today homescreen (please take note the "start" menu is not there)
4. Align screen / stylus. You can do this by pressing Action Key then Calendar button.
5. Press Contact and Action Key (both) several times (I think around 20 times). You will hear clicking sound. This will bring out the "start" drop down menu. If it does not pop out, repeat again.
6. Download the correct RSU for your phone. Save into SD and copy to programs (same procedure as in wiki)
7. Run the RSU program, expect to fail at 1%. Re-boot. this time you will be able to active sync your phone again. (my wallaby did to my surprise)
8. I gave up on the RSU 4.16 (after countless tries) and I downloaded RSU 4.21 from xda-developers ftp (exe file) since I am now able to sync to my device.
9. Install RSU upgrade to your device, the phone will automatically re-boot.
10. Surprise! I was able to re-flash the RSU! (I think the problem is the RSU 4.16, try other 4.xx instead but be careful to use the correct version)
Now my Wallaby is up and running again! Thanks to xda-developers and Wiki and to Lumpi. There is no secret. I just did a lot of reading from the threads. It's all there. Good luck guys! Merry Christmas!
why ur wallaby resynched....
The reason it re-synched.... is because... when u go to the wallaby bootloader... and go into the GSM menu's (that allow u to tun off and on the gsm... and band tests... the key to it is there.... just reset those puppies at least 1nce.. then when u reset and boot... voila... it will sync,, but... I'm still stuck on that 1% error... rsu failed!! so.. wish me luck... oh.. btw.. when u get the 1% error it will not sync again until u repeat the process at the wallaby bootloader... so... any ideas anyone>> to get past the 1% error? I've read up and down ... searched left and right here... but no luck yet... I'm still trying what was posted here... so... wish me luck.... !!! oh... question what version is ur wallaby?? PW10A or B?
Re: why ur wallaby resynched....
r5pete said:
The reason it re-synched.... is because... when u go to the wallaby bootloader... and go into the GSM menu's (that allow u to tun off and on the gsm... and band tests... the key to it is there.... just reset those puppies at least 1nce.. then when u reset and boot... voila... it will sync,, but... I'm still stuck on that 1% error... rsu failed!! so.. wish me luck... oh.. btw.. when u get the 1% error it will not sync again until u repeat the process at the wallaby bootloader... so... any ideas anyone>> to get past the 1% error? I've read up and down ... searched left and right here... but no luck yet... I'm still trying what was posted here... so... wish me luck.... !!! oh... question what version is ur wallaby?? PW10A or B?
Click to expand...
Click to collapse
hello..
did you find a solution for 1% error? I have the same issue and I tried all night...and day...and nothing (
Reflash via SD
Hi morph751,
Firstly, thanks for this, I have now finally got my Wallaby back to a state where I can ActiveSync it, and actually run programs on the thing. Unfortunately, the RSUupgrade continually faults at the 1% mark both version 4.16 and version 4.21. The one step in your instructions that I did not follow, was the first "Download xda developers special rom and re-flash via sd card". The problem with doing this, is that when cold booting with the SD card in the slot the device simply hangs at the GSM Error screen. I have bootloader version 6.22, so I assumed this was due to the post 5.17 SD card locking. But the info and utility to bypass this doesn't seem to help either.
Is there something fundamental I am missing in terms of being able to boot the device into a mode that will allow me to flash it via SD?
By the way, when trying to flash the device via Program A, it fails with an error indicating that the power cable is not plugged into the device. The device is in the cradle, with USB connected and power connected to cradle.
OK, by folllowing the instructions at http://forum.xda-developers.com/showthread.php?t=245282, I have been able to sucessfully flash the device to XDA Developers special ROM image 1.2. But I still get Program B failing at 1%, using version 4.21. Has anyone managed to overcome this, if so how? Thanks in advance for any help.
My two weeks old Softbank X01HT PDA got stuck on its start up with Windows Mobile screen. All key clicks can be heard, but nothing is happening. When dialing from another phone, ringing tone can be heard but PDA shows nothing. Few days back I tried to install freeware called ScreenLock, but failed in registraition. I suspect whether it works.
Anyway I tried soft reset, but still stuck. CD & Manual received are in Japanese, hence I am helpless. What can I do?
I think you should perform a hard reset, But all your datas (phone book, installed applications ,...) would be lost.
Hold the 2 Softkeys and reset your device with stylus. follow the instructions and on your device and do a hard reset.
Hard Reset doesn't work
Dear BSBOYS
Hard reset does not work. still problem exists.
so, in this case you should provide detailed information about your device including IPL, SPL, your rom details .....
BTW, have you read the WIKI???
Thanks bsboys, It worked! Thanks a lot!!
Hi,
i flashed a rom 2 weeks ago, everything went well. yesterday i wanted to flash another os but before i could flash it, it seemed to get bricked. It stucks on the "HTC Splash" (not the WM6 Splash). I read a lot of threads and wiki threads but i don't unterstand anything! What i've to do to unbrick my phone? I tried to flash another rom but after 0% of flashing a error appears.... flashing with sd card doesn't work, too it changes to bootloader after the "Loading..." screen
i havent got hardspl or something...
please help!
UPDATE: i got the sd flashing to work... same thing but: now it stucks at the WM splash, not the t-mobile/htc one...
You need to find out what SPL you have (I'm guessing 2.03 but if you have 2.10 olipro then its got Hard SPl on it) and then do a search for "bricked SPL x.xx". You will probably find a HEAP of posts. However, some advice that seems to recover a small minority (sometimes with the "No GSM" error) -
1st thing to do is do a hard reset. Both softkeys and reset with stylus. Hold in all buttons until it asks if you want to reset to factory. Press "R" on the slideout keyboard and the "Space".
Hopefully this will fix. If it doesn't, Put it in bootloader, connect to pc (make sure "Allow USB Connection" Active Sync settings have been unticked) and run the SHIPPED STOCK ROM. This is the rom the Hermes came with originally. This MAY fix it otherwise you're in for some major reading and hair pulling.
If you should fix this then PLEASE, for the love of god, Hard SPL your Hermes before going into the wide world of flashing.....
Good Luck...
thanks i'll try it. hard reset causes kinda... nothing^^
i hope i can fix it otherwise i'll buy a touch pro
...but i think it doesn't work, because i flashed a shipped rom via sd card yesterday and the problem is still there... isn't there any way to put hard spl on my device, yet?
Try re-installing the stock rom again using sd card (if thatys how you did it last time), it could've been a bad flash. I've had those a couple of times myself. Just remember to install Hard SPL if you're successful as it makes it SOOOO much easier to recover from bad flashes.
Last thing to check would be if you have "bad blocks" using MTTY. If the boot sector has been stuffed up this may cause this problem. Do a search through the wiki, its been covered extensively...
Cheers...
okay i think my problem is solved: t-mobile replaced my device
first thing i'll do with my new device: HardSPL^^
anyhow thanks!
Upgrade successful but now stuck
I have a Three (au) Dopod 838 pro, which I upgraded from the original Windows Mobile 5 to the Three Windows Mobile 6.0 ROM. Unfortunately I didn't read up on this site first, I thought it would be straightforward since it was a ROM from the manufacturer and all, so I haven't Hard SSPL.
The upgrade reported as successful and my PC disconnected but the phone won't boot, it sticks at the Dopod screen with some numbers at the bottom. They are:
M 05 R 1.47.30.10
S 04 G 32.80.7020.20H
B 07 D 3.54
I have tried hard resetting, and returning the phone to bootloader and reflashing the same new ROM image, always with the same result.
On the bootloader, it says
HERM100
IPL-1.04
HERM100
SPL-2.03
Is there anything which can be done or is it a trip to the service centre (wherever that is)?
Just checking - Hard reset = both soft keys above the dialler closest to the lcd and reset with stylus. Hold in until it asks if you want to reset to factory. Press r on slideout keyboard then space.
This is a hard reset, not just using the stylus.
Otherwise, you have a LOT of reading material to go through with (maybe) no actual solution.
Cheers...
tried that
Thanks, but yes, I had tried that, a number of times. I think the phone will be going to a service centre today.
Dear Members,
I tried to upgrade my JasJam with "838Pro_HK_ENG_WM6_Upgrade_20070712"
Which worked with other JasJams (Many of my friends has it working).
On upgrading, it stucked on 11% saying Error [262]
I went through recovery, and it said remove the USB cable, remove the Battry, Return it, start the phone, connect the USB, and its recovered.
After that Its again stucked in 100% and the same senario is happening.
Please tell me is there any possibility to restore my phone working.
Its stuck now, and only the (Three color screen) is on the screen.
Hard reset, soft reset is not functioning, and the phone refused to show anything except the three color screen.
I searched the forum, but found no relative article, I am searching since two days your forum and I know that no other forums can help me in this as I was always getting my help from yours.
Thanks for your time.
HERM100
IPL-1.04
HERM100
SPL-1. 40. 0lopro
If you're using XP then untick "Allow USB Connection" in activesync.
Reset to bootloader on your Hermes, Hold power, OK button above flywheel and reset with stylus.You will get the same screen you have now but it won't be a f*&%ed up version of bootloader. Connect to PC by USB and Install Hard SPL V7, found here - http://forum.xda-developers.com/showthread.php?t=296722
After this, use the sd card method to install the ROM.
1. Format a 2Gb or less sd card FAT32. ?CFopy the .nbh file of the rom you want to it and rename to hermimg.nbh .
2. Insert into phone and reset to bootloader.
3 If you did everything right then follow the prompts...
Cheers...
Again problem!
Dear ultramag69,
Thank you for your fast reply.
I did (untick) that option in the ActiveSync.
And also did reset to the device by holding the Power + Ok (under the flywheel) with Stylus reset.
After that I downloaded "Hard SPL V7" and tried to update.
First of all, in the "Hard SPL V7" there was only the last option active, and there was down a checkbox also active, but when choosing the last option, checkbox bocomes like everything else disabled.
However, I got the erro 286
I felt like the Device disconnected from USB and reconnected again (Windows gave me the sound when you remove some USB device and you re-connect it again) :-|
I don't know what to do with this dead device now !
Thank you very very much for your time and help
Don't quote me on this as I suspect you need Hard SPL V7 but, as yo've tried things out and you're about to quit anyway, Try using the sd card to update the Stock rom, the rom that came on your Hermes, or updated version. It might let you do it if the CID matches.
I don't believe SPL 1.40 allowed you to flash ANY rom but it may let you re-install the stock rom BUT it must be the original carrier software it came with. If you had Telstra rom on it when you got it, it must be a telstra rom you flash. Make sure its for the right country too as some carriers are all over the world.
Cheers...
Hello ultramag69,
Thanks alot for your reply.
Having my i-mate dead, is really interesting.
I am trying to recover it up, Mine came with (HTC) logo when booting, and I did flushed it with Dopod.
But recently, the network stopped, and I asked some experts, they said it need new OS (They ment to re-flush the ROM).
I tried with the same Dopod that was successful before, and its now stucked on 11%.
I even downloaded the Telstra but the same, it stucked on 13%.
This is my entire story, and still I am trying to get it up.
Thanks alot for your helping. nice of you.
And for all who read my post, if they had such experience before, please help.
Hello ultramag69,
Thanks alot for your reply.
Having my i-mate dead, is really interesting.
I am trying to recover it up, Mine came with (HTC) logo when booting, and I did flushed it with Dopod.
But recently, the network stopped, and I asked some experts, they said it need new OS (They ment to re-flush the ROM).
I tried with the same Dopod that was successful before, and its now stucked on 11%.
I even downloaded the Telstra but the same, it stucked on 13%.
This is my entire story, and still I am trying to get it up.
Thanks alot for your helping. nice of you.
And for all who read my post, if they had such experience before, please help.
If you can, try to find the original SHIPPED STOCK ROM. It may be your Hermes won't be recoverable as the flash stopped in the radio rom part. Most people use a cooked rom as this has the radio rom part out.
I personally use the sd card method to flash my roms so there are no sync errors or accidents with my PC. But you need Hard SPL V7 installed to get that to work with any but the shipped rom.
DON'T try flashing anything but the shipped rom or you will loose all chances of recovering your Hermes.
The only other suggestion would be to flash the SHIPPED RADIO ROM, but you need to know what radio it was before you flashed it with the dopod rom.
Unfortunately the radio rom is the Achilles heel of our phone series. Any problems during flashing of that means we pretty much end up with a brick 99% of the time. Most people are stuck and the rest seem to have limited success reflashing the radio. AVERY small percentage get it working with no trouble, but its a REALLY small amount of people.
Good luck, Make sure you flash with the SHIPPED STOCK ROM to improve your chances of success.
Cheers...
Ultramag69, Thanks alot for your consideration.
Flusching using SD card didn't success with SPL V7.
I formatted my MicroSD card, 2GB with Fat32 FS.
After that I copied the file that came with the zip archive (RUU_signed.nbh) and renamed as required: (herming.nbh).
And I put it in my i-mate, and holded the (Power + OK under flyweel) then restarted using the stylus, It showed me the tri-color screen, then it shows (Loading...) with Gray background screen (Which is normally the flusching screen) but it returned to the tri-color screen.
Any suggestions to get this SPL V7 installed successfully ?
I tried with all my (.nbh) files that I have downloaded from all sources, but its the same screen.
I think something is really wrong with me i-mate, should I take it to some Hard-ware service center ? and what can be damaged and need to be replaced in such cases ?
I am very excited in getting it working again.
Thanks alot.
Cheers...
I had bricked my Hermes a couple o' times, because of a rom I cooked half-way ( LOL ). Each time I had to flash back to the stock rom as suggested. Don't lose hope, cuz there's some people who will tell you just to accept it as bricked. You could also take the sucker apart and use jtags to flash. Most types of bricks can be solved when it comes to the Hermes. There's a thread somewhere that polled the different types of bricks, and except for radio bricks, most can be solved. If you unbrick it try 6.5 .... !!! My rom is cooked all the way now
Arwany, did you run the SSPL.exe file in the sd card instructions for Hard SPL found on page 116, post 1160 of the Hard SPL thread? You need a version of Soft SPL (SSPL) to flash using the sd card as the CID must be bypassed. The reason we Hard SPL our Hermes is because its safer. Its worthwhile flashing the SPL using unsafe SSPL (even if you use the pc you have Soft SPL installed) as its a short flash, flashing a rom (especially stock roms with the radio rom inside) is a riskier and longer flash.
Cheers...
I had the same problem.. All you have to do is establish a connection with Actisync, then run the Updater. There will be 3 colors on your Screen, sont worry, just wait 10-15 min and your should be done with the setup.
Want to help
Arwany said:
Ultramag69, Thanks alot for your consideration.
Flusching using SD card........ with the zip archive (RUU_signed.nbh) and renamed as required: (herming.nbh).
And I put it in my i-mate..........
Click to expand...
Click to collapse
Hi,Just to tell You that I've noticed a little spelling mistake.You've written "herming.nbh" But it should be "Hermimg.nbh".
Not the 1st person to make that mistake, and probably won't be the last.....
Hi All,
Yeah, that worked out for me, I could successfully flush my JasJam with that.
Thanks for your reply.
I am still facing problem when trying to flush with other OS, its always stuck on the GSM line.
I am using the SD flush method.
Any suggestions ?
THank s alot for your help!
If you have the no GSM problem the only way to, maybe, fix is to flash the original SHIPPED STOCK ROM, or the original radio rom. Flashing anything else may result in a permanent brick...
If it doesn't succeed then, sorry, its not repairable. Can be used as a PDA but not as a phone ever again.
Cheers...
Thansks Ultramag69, for all the helps, It solved my main problem.
You also Ekonkar, your comments was so helpful.
I will try to do some hardware repairing in some Mobile shop, they may get it up again !
To fix it will cost more than to get a new device... They'll tell you they can't fix it or it needs a new mainboard. Will still cost you for this nugget of info. My advice, buy a Hermes off ebay, either working or not. If its not, make sure its screen related problem cos you have the parts to fix... Unless your screen has gone bung too...
Cheers...
I gave it to the repairing guy, he replaced the GSM item and its up and running now for only 20$.
Prost :-D
Sweet, You should post where and what country so others in the same situation might be able to get their Hermes up & running.