My two weeks old Softbank X01HT PDA got stuck on its start up with Windows Mobile screen. All key clicks can be heard, but nothing is happening. When dialing from another phone, ringing tone can be heard but PDA shows nothing. Few days back I tried to install freeware called ScreenLock, but failed in registraition. I suspect whether it works.
Anyway I tried soft reset, but still stuck. CD & Manual received are in Japanese, hence I am helpless. What can I do?
I think you should perform a hard reset, But all your datas (phone book, installed applications ,...) would be lost.
Hold the 2 Softkeys and reset your device with stylus. follow the instructions and on your device and do a hard reset.
Hard Reset doesn't work
Dear BSBOYS
Hard reset does not work. still problem exists.
so, in this case you should provide detailed information about your device including IPL, SPL, your rom details .....
BTW, have you read the WIKI???
Thanks bsboys, It worked! Thanks a lot!!
Related
Hello All,
Something freaky just happend. I was reading a thread about how someone was unable to access his Bootloader after a WM 2003 install and decided to go into Bootloader mode. No problems there, so I did a soft reset to get out of Bootloader mode and Boom! 'Tap here to set up your device' displayed amid the 'Bliss' background.
I had to setup the device from scratch. Luckily not all that much loss of software and I only lost one appointment which I still remember. Can you guys with WM 2003 try it and let me know your results? Please backup your data first!
Thanks
Yep same thing here! i tried it fater upgrading and its just like i did a hard reset...
:?
Same here! :shock:
BTW I'm using a US T-Mobile PPCPE.
Hey Guys.
Have a little problem with my xda. I want to upgrade to WM2003 via SD-Card-Method, but i can not enter the bootloader.
I hold the power button and make a soft reset, but the bootloader screen did not appears. It make only a normal soft reset....
Tried also after a hard reset, but that didn´t change anything.
Last Rom-Update worked via Bootloader.
I user a cooked kitchen rom 3.17.03 with RSU 4.21
Any one got infos how i can "repair" it?
Regards
Stefan
If I'm not mistaken XDAtools can be used to reload your boot loader.
Check out the below thread for more info.
http://xda-developers.com/forum/viewtopic.php?t=2189
Download:
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
HTH
you need the tool discussed in this thread:
http://xda-developers.com/forum/viewtopic.php?t=2079
Thanks to all your answers....
Tried to flash the Rom via Programm A, but i get an Error.
Now the device is out of order. No function any more.
Neither a soft nor a hard reset returns the function.
Screen is "black" and nothing happens.
I wll call my insurance tommorrow to get a new device...
:roll:
Thanks for help, hread can be closed...
Regards
Stefan
Hi,
i flashed a rom 2 weeks ago, everything went well. yesterday i wanted to flash another os but before i could flash it, it seemed to get bricked. It stucks on the "HTC Splash" (not the WM6 Splash). I read a lot of threads and wiki threads but i don't unterstand anything! What i've to do to unbrick my phone? I tried to flash another rom but after 0% of flashing a error appears.... flashing with sd card doesn't work, too it changes to bootloader after the "Loading..." screen
i havent got hardspl or something...
please help!
UPDATE: i got the sd flashing to work... same thing but: now it stucks at the WM splash, not the t-mobile/htc one...
You need to find out what SPL you have (I'm guessing 2.03 but if you have 2.10 olipro then its got Hard SPl on it) and then do a search for "bricked SPL x.xx". You will probably find a HEAP of posts. However, some advice that seems to recover a small minority (sometimes with the "No GSM" error) -
1st thing to do is do a hard reset. Both softkeys and reset with stylus. Hold in all buttons until it asks if you want to reset to factory. Press "R" on the slideout keyboard and the "Space".
Hopefully this will fix. If it doesn't, Put it in bootloader, connect to pc (make sure "Allow USB Connection" Active Sync settings have been unticked) and run the SHIPPED STOCK ROM. This is the rom the Hermes came with originally. This MAY fix it otherwise you're in for some major reading and hair pulling.
If you should fix this then PLEASE, for the love of god, Hard SPL your Hermes before going into the wide world of flashing.....
Good Luck...
thanks i'll try it. hard reset causes kinda... nothing^^
i hope i can fix it otherwise i'll buy a touch pro
...but i think it doesn't work, because i flashed a shipped rom via sd card yesterday and the problem is still there... isn't there any way to put hard spl on my device, yet?
Try re-installing the stock rom again using sd card (if thatys how you did it last time), it could've been a bad flash. I've had those a couple of times myself. Just remember to install Hard SPL if you're successful as it makes it SOOOO much easier to recover from bad flashes.
Last thing to check would be if you have "bad blocks" using MTTY. If the boot sector has been stuffed up this may cause this problem. Do a search through the wiki, its been covered extensively...
Cheers...
okay i think my problem is solved: t-mobile replaced my device
first thing i'll do with my new device: HardSPL^^
anyhow thanks!
Upgrade successful but now stuck
I have a Three (au) Dopod 838 pro, which I upgraded from the original Windows Mobile 5 to the Three Windows Mobile 6.0 ROM. Unfortunately I didn't read up on this site first, I thought it would be straightforward since it was a ROM from the manufacturer and all, so I haven't Hard SSPL.
The upgrade reported as successful and my PC disconnected but the phone won't boot, it sticks at the Dopod screen with some numbers at the bottom. They are:
M 05 R 1.47.30.10
S 04 G 32.80.7020.20H
B 07 D 3.54
I have tried hard resetting, and returning the phone to bootloader and reflashing the same new ROM image, always with the same result.
On the bootloader, it says
HERM100
IPL-1.04
HERM100
SPL-2.03
Is there anything which can be done or is it a trip to the service centre (wherever that is)?
Just checking - Hard reset = both soft keys above the dialler closest to the lcd and reset with stylus. Hold in until it asks if you want to reset to factory. Press r on slideout keyboard then space.
This is a hard reset, not just using the stylus.
Otherwise, you have a LOT of reading material to go through with (maybe) no actual solution.
Cheers...
tried that
Thanks, but yes, I had tried that, a number of times. I think the phone will be going to a service centre today.
Hi,
I'm a french beginner and I tried to update my HTC x7500 to the radio v1.58.
At the screen of my PDA, it display "Loading...", and I can do nothing because the USB connection doesn't work anymore.
What Can I do?
I have already try a hard reset by press Volume down and reset and I have always the same message at the screen "Loading..."
Also I 've forgot to use "AthenaUnlocker.exe" before my upgrade.
Thanks,
Alex
I found the solution
I found the solution, I removed the battery and after a few minutes, I restart my PDA and do a hard reset.
Alex+
i searched the forum for 4 days tioo have a clear solution for thos 2 niki100 i recieved the stuck at the operator logo tim from brazil i dont know what my clients did to them but apears the they try to play over upgrading any way im looking for reflashing the same rom to have them back a life again.
i tested many thread posted here buy members i downlaoded many rom that never works with this kind of problem but when i found the mtty command task 2a then boot one of them turnd with a white screen but stell enter boot mode well for peopole how like to help me the spl on the boot mode is
spl 1.21
R 1.58.21.26
G 25.65.30.04H
D 1.35
VENDOR ID TIM BRAZIL
PLEAS GUYS I NEED TO SLEEP ANY HELP FROM EXPERTS WELL BE GOOD AND USEFULL
REGrds to alll
I need this original rom as well, not possibile download from oficial site....Serial number not acepted!!
Phone stuck on operator logo...cant hard spl!!!
is it any of these...
http://shipped-roms.com/shipped/Nike/
DT
Cant see mine R 1.58.21.26....anyway thx!!
theres other way to revive my Niki?
edcentec said:
Cant see mine R 1.58.21.26....anyway thx!!
theres other way to revive my Niki?
Click to expand...
Click to collapse
These are possibly updated versions of your area's stock ROM, the 1.58 radio would be a version 1 ROM, where the 1.65 radio are the version 2 ROMs.
Does it have Hard SPL installed? If not, see if it will install it, then you can install any ROM.
There are other things that can be tried using MTTY, but I am no expert on that - there is a thread on it though.
DT
Could you tell us what you did, I mean did you already tried a hard reset or something simular, and which rom you where using when the phone freeze.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings -‑ the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
To perform a hard reset
1. Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the left side of your device.
2. Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:
3. Release the TALK and END buttons, and then press ENTER on your device.
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, hard reset or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.
Click to expand...
Click to collapse
Greetz,