Hi,
I'm a french beginner and I tried to update my HTC x7500 to the radio v1.58.
At the screen of my PDA, it display "Loading...", and I can do nothing because the USB connection doesn't work anymore.
What Can I do?
I have already try a hard reset by press Volume down and reset and I have always the same message at the screen "Loading..."
Also I 've forgot to use "AthenaUnlocker.exe" before my upgrade.
Thanks,
Alex
I found the solution
I found the solution, I removed the battery and after a few minutes, I restart my PDA and do a hard reset.
Alex+
Related
Hi Guys,
I need help, I have done upgrades several times and am not new to the process. Today however something has gone wrong. Need your help to fix it. I downgraded from gullum VII to PV Temp and then did the upgrade to PDAVIET Transformer.
Upgrade failed and as per on screen instructions did a soft reset and repeated the process. It failed a second time. When I did a SOFT reset again the OS showed 6.6.666 in spite of the upgrade failing. After that the screen has gone blank.
I can go to the tri color bootloader screen, but the device does not connect to the computer. So I cant even down grade it to pv temp. what should i do. how to solve this
Can anybody help….please
Thanks in advance
prash1410 said:
Hi Guys,
I need help, I have done upgrades several times and am not new to the process. Today however something has gone wrong. Need your help to fix it. I downgraded from gullum VII to PV Temp and then did the upgrade to PDAVIET Transformer.
Upgrade failed and as per on screen instructions did a soft reset and repeated the process. It failed a second time. When I did a SOFT reset again the OS showed 6.6.666 in spite of the upgrade failing. After that the screen has gone blank.
I can go to the tri color bootloader screen, but the device does not connect to the computer. So I cant even down grade it to pv temp. what should i do. how to solve this
Can anybody help….please
Thanks in advance
Click to expand...
Click to collapse
The general method to connect to your PC when in bootloader is to DEactivate "Allow USB connection" in the conections settings of ActiveSync.
With that setting inactive, your device will be connected as an regular USB device instead as being redirected from within ActiveSync. This way the WM5 RUU can connect and you can try "Step1" again.
blank screen
rondol1 said:
The general method to connect to your PC when in bootloader is to DEactivate "Allow USB connection" in the conections settings of ActiveSync.
With that setting inactive, your device will be connected as an regular USB device instead as being redirected from within ActiveSync. This way the WM5 RUU can connect and you can try "Step1" again.
Click to expand...
Click to collapse
thanks rondol1
will try that and keep you posted
edit: thanks, problem solved
If anyone can help me I just brick my ameo. I download olipro unlocker followed steps had everything done but after i finished the 1step it wont boot up again its just dead. tried hard reset alot of times wont even go pass it . it just light green.Pls help
Can you enter the Bootloader mode?
Press Camera Button (completely) and hit the reset button at the same time.
i know yor problem press cambutton and powerbutton for at same time so you will come to the bootloader modus now plug in your usb cabel to your device and your computer now open the image of wm6 that you want to install the setup will find your ameo now
hope you will get it
good luck from germany and sorry my bad englisch
Thank you that Fixed it. I just panic but now the whole process was finished. from 1-3 now. thank you for the reply
please help.
I have the same probleme and i can´t enter the Bootloader mode.
remove sim and storage card then do as mosho said
ie press camera, comms button and reset button then restore original rom , then olipros program
as per the wiki
http://wiki.xda-developers.com/index.php?pagename=Athena_Resets
cant get into bootloader
hello,
i cant get into bootloader at all.
i removed the sim and the memory card, al i get is a short flash of red light t the joystick, and only if the device is connected to the power cable.
it doesnt charge, it does nothing. i tried really everything.
does anybody have an idea?
thanks
mike
try a service exchange at t-mobile. there seems to be something wrong with your device.
my ameo had no probs running olipros unlocker.
regards dieter
i used the unlocker with another ameo i bought, and it worked fine.
so i tried the same with the 2nd, and it crashed.
will they find out that i tried to unlock the device?
regatds
mike
ameo dead
Hi mikekarl
we have the same problem that happened to me today.
i have done it before with another ameo worked fine.
Now i cant get into bootloader or Hardreset.
and i cant try a service exchange because iam not t-mobile customer.
Pls help
My two weeks old Softbank X01HT PDA got stuck on its start up with Windows Mobile screen. All key clicks can be heard, but nothing is happening. When dialing from another phone, ringing tone can be heard but PDA shows nothing. Few days back I tried to install freeware called ScreenLock, but failed in registraition. I suspect whether it works.
Anyway I tried soft reset, but still stuck. CD & Manual received are in Japanese, hence I am helpless. What can I do?
I think you should perform a hard reset, But all your datas (phone book, installed applications ,...) would be lost.
Hold the 2 Softkeys and reset your device with stylus. follow the instructions and on your device and do a hard reset.
Hard Reset doesn't work
Dear BSBOYS
Hard reset does not work. still problem exists.
so, in this case you should provide detailed information about your device including IPL, SPL, your rom details .....
BTW, have you read the WIKI???
Thanks bsboys, It worked! Thanks a lot!!
Three days back,my SPV C550 suddenly hanged.I restart it by removing the battery.After reboot, it now only showing desktop with battery icon,signal strength indicator and the Unlock button(soft key) with Windows Mobile screen logo.I tried Hard reset, which cannot complete succeessfully.It also can't connect to Active Sync.
I also tried to flash the ROM from SD card,but it can't allow update because
my phone doesn't have a SuperCID.i unable to change CID because both SPV-Services and pdocread.exe need Active Sync connetion to work.
I searched all the forums,but didn't find any solution how to change CID without Active Sync.
Please help.
I had a similar problem with mine. The screen is the same as yours only varying with the sim card removed to a sim missing logo. Also mine makes the error/message noise repeatedly for a phew secoonds every half hour or so.
I just gave up in the end and admitted it was a brick
and the saga continues
Well the TyTn has died and I'm still waiting on a refund on a dodge wizard so its time to dig out the old SPVs I have a working Tornado (the right soft key has packed up thats a little annoying) so am trying to revive this hurricane.
I have linked some pictures of what is dose display and as you can see it will load into boot loader but due to not being ably to unlock it I cant flash any of the roms I have found.
I have been trying to fix this now for well bloody ages on and off but a good straight 12 hours just recently and to no avail.
In short I need a way to unlock the phone without active sync. The only way I can think of being able to do this is with some kind of specific software through boot loader
Any ideas?
HELP PLZ DEAD SPV c550 During WM6 Upgrade
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
Hello,
I made so many search in the forum to solve my problem,but it doesnt work.
I have Imate JamIN, I did so many upgrades, and it works with me.
The SPL is 2.G4.4PDA (Hard SPL)
I installed The RUU and upgrade to transformer 1.1, it use to be fine with me before, but now when i reset or hard reset the phone, the screen is blocked on Loading OS with windows vista Background. IS it because of the Hard SPL?
When i do reset, The screen fade to white and then it will reset, I dont know the problem
So now when i want to run The RUU again, an error 260 that am not connecting the cell to pc....
i wish it was the 3 colors, it wont be a problem
Is my Phone is dead?can i recover?how?
Thank You
Have you tried entering bootloader? Start up the device, hold the Comm Button and soft reset. That should get you to the bootloader screen at which you should be able to flash a ROM.
Thanks man,it works with me
Enjoy some more ROM flashing!