Hi.
I need a motherboard for my dead Qtek9090.
Otherwise, if you have one working i`m also interested.
Please PM me or email to [email protected]
Thank you in advance!
i have an extra board for blue angel but the volume control and the reset button are not working anymore...interested?
I have an orange spv m2000 fully working I am not using. Make me an offer if you are in the UK
creso, can you contact with me via e-mail? ([email protected])
coz it seems that my pm can't reach you (smthg works wrong)
check ur mail..thankz
Related
Hi
I have one question may be its foolish to ask
Is it true that upgrading Qtek 1010 to WM 2003 will crush the main board cause am thinking in upgrading my ppc to WM 2003
what do u Suggest
Thanx
You think??!!
so far its been 6 month now and i upgraded my Qtek 1010 for 3 times and its running smoothly...
so again you think?
go ahead do it but please make sure you know what your doing...
:wink:
Thanx for answering me and encourgin me
actually i posted my Qtek Device Info on another post and somebody kindly told me that i have already wm2003
my device info
ROM Version:4.00.16 Eng
ROM Date : 07/10/03
Redio Version : 4.21.00
Protocol Version: 32S54
so Mr.ARZLEB do u suggest anything for making this qtek arabic enabled thanx alot
Qtek and crushed motherboards
The only way you'll crush your Qtek upgrading from Pocket PC 2002 to Windows Mobile aka Pocket PC 2003 is if you physically sit onto of the device while the upgrade is being processed. If you believe this, boy do I have some very cheap igloos in Alaska for you to buy!
raycarroll70
The only way you'll crush your Qtek upgrading from Pocket PC 2002 to Windows Mobile aka Pocket PC 2003 is if you physically sit onto of the device while the upgrade is being processed. If you believe this, boy do I have some very cheap igloos in Alaska for you to buy!
Click to expand...
Click to collapse
Hey man go easy on the new joiner with 4 posts... Any hot igloos for me?
Falconsql
so Mr.ARZLEB do u suggest anything for making this qtek arabic enabled thanx alot
Click to expand...
Click to collapse
Yes from the info you have posted you do have WM 2003. As for Arabic support you will find all the anwsers here:
http://forum.xda-developers.com/viewtopic.php?t=1861
http://www.pocketpc4arab.com
Enjoy
Thanx ARZLEB
Sorry for asking much
but the www.pocketpc4arab.com is not working with me is it with u
then the post u put contains beta arabization do u suggest me to use it and when i back up my rom on a MMc card can i use this card for another programs or i should leave it as a back up only
thanx
Falconsql
www.pocketpc4arab.com Seems down try this one:
http://www.ppcme.com
Actually i don't suggest to use Arabic in general this is my opinion as what to do its your decision.
As for the MMC i suggest when you back up your ROM it not to use it for any other thing even if you try the MMC would require format to be able to write on it anything else so that mean you will loose all the Backup data.
If you need anything else just keep asking till you get all the anwsers...
regards
Thanx Alot ARZLEB
first thanx alot i dont know if u r in lebanon now but if not i was in beirut before a couple of days ,it was great there
however i have a question
first foolishly i changed the clock in the upper bar from digital look into analog look like the watch on the wall how to make it again digital
then how to make the time apperas in 12h format on the today screen and not 24h i tried time setting in regional setting and i tried all the formats but nothing happened
thanx
first thanx alot i dont know if u r in lebanon now but if not i was in beirut before a couple of days ,it was great there
Click to expand...
Click to collapse
Your welcome anytime and yes i am in Lebanon now near the area we call DT (Down Town).
however i have a question
first foolishly i changed the clock in the upper bar from digital look into analog look like the watch on the wall how to make it again digital
Click to expand...
Click to collapse
Check the settings / clocks or setting / Regional Manager.
then how to make the time appears in 12h format on the today screen and not 24h i tried time setting in regional setting and i tried all the formats but nothing happened
thanx
Click to expand...
Click to collapse
Go to Settings then Regional settings and there change the English to English USA or English Australia.
Thanx ARZLEB
but the problem hasnt fixed
i still have the analog clock in the blue upper bad ,i want it to be digital as before if u have it digital just point on it and chose analog clock and u will not find any way to make digital agiain try that then i failed in makin my time format 12h
then do u have in lebanon Qtek1010 accessories
am looking for stylus
headset stero if u know prices would be good
thanx
Hello everybody! Please help me.... I purchaised 2 yers ago sx56 at ebay and unlock it by myself (special windows edition)
Everything was oke. But several days ago vibrate stop working... (((
Last week was very frosty in Siberia, around minus 43 in celsius. That is why i doesnt use pda out of warm buildings (on the frost pda become freezy, windows work incorrect and battery die very fast.
QUESTION... please tell me how can i check working of vibrate engine? Does anybody have a special program to test it???
Unpatient looking forward to hearing from u
Vadim.
If I were you I'd open my XDA and check if the vibration engine is still connected to the motherboard [I had once problem with not workin' wibration and this was the cause]
im a student from asia.i have dopod 838 pro,i bought it as second hand unit,initially it was great but after one month,give error report when i try to use camera;it is unableto start camera,unable to initialize camera,i did everything i can do,i flashed it using several roms,now i have wm6.5 rom.then i desided to open the phone for check hardware issues,i see near the back camera and flasher port there is oxidised area i tried to clean them with usint contact cleaner,then very small piece of mainboard circuit detached,i think probably it is resister or transister,i was hopeless ,i know i cant repair it.if any one have solution pls help me,i cant make video calls also,r there any trick can i make video call using front camera,if not where can i take mother board,what abt prices,if anyone like to sell or donate there spare mother board or can give advice please,let me my no is +94715319206,[email protected] tx lot pls save me, my phones all other functions work well.
Hello,
It seems that my xda lls it's not working anymore, so i need a new (or used but in good working condition).
I need also a battery and a charger.
Anyone can contact me at [email protected] if want's a private conversation.
Thanks in advance, Besmir
Hello,
It seems that my xda lls it's not working anymore, so i need a new (or used but in good working condition) MOTHERBOARD.
I need also a battery and a charger.
Anyone can contact me at [email protected] if wants a private conversation.
Thanks in advance, Besmir
p.s. Sory for my English...i'm not from England )
Hi All,
Unfortunately my young son got his hands on my TP & let it fall.
I am now getting a blank screen with an empty battery-type icon with a question mark inside it (see attached pic please) :crying:
Anybody know what is wrong with it plus what are the hopes of me finding a fix/replacement part etc?
By the way I have tried everything to see if it would work including a hard reset, full battery drain & battery re-charge but still get this Icon.
Any help would be greatly appreciated!
RCO20000 said:
Hi All,
Unfortunately my young son got his hands on my TP & let it fall.
I am now getting a blank screen with an empty battery-type icon with a question mark inside it (see attached pic please) :crying:
Anybody know what is wrong with it plus what are the hopes of me finding a fix/replacement part etc?
By the way I have tried everything to see if it would work including a hard reset, full battery drain & battery re-charge but still get this Icon.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Doesn't sound good. Here's a few links that might help:
http://forums.webosnation.com/hp-touchpad/310969-battery-icon-w-question-mark-researching.html
http://forums.webosnation.com/hp-to...ery-icon-after-disconnect-w-out-ejecting.html
Seems like there are a lot of various postings about the battery with question mark screen. Most seem to involve batteries that have died, and most involved sending the TP to HP for repair.
Good luck!
If it's not marked and still under warranty send it back to HP. Otherwise it sounds like a connection is broken from being dropped so at the very least you would need to have a look inside and see if it's anything obvious.
What happens when you connect it PC?
typo
Hi. Thanks for help folks.
It is marked ie small piece beside speaker broke off.
I will try and hook up to pc when I get home later ex work and see if it recognises .tp.
I never mentioned its ported with cm9 &I'm afraid to send back to hp (still under warranty) as they will find this out?
Also, I'm in Ireland.
RCO20000 said:
Hi. Thanks for help folks.
It is marked ie small piece beside speaker broke off.
I will try and hook up to pc when I get home later ex work and see if it recognises .tp.
I never mentioned its ported with cm9 &I'm afraid to send back to hp (still under warranty) as they will find this out?
Also, I'm in Ireland.
Click to expand...
Click to collapse
If you can't read any files and it is broken I doubt that they will be able to either which would mean they would send you a refurbished one ie newish. Worst case they find out and send it back unrepaired . I had one that may have had beer spilt over it and when I sent back and asked what was happening they said it was liquid damage and that I would get it back not fixed or a refurb . I got lucky .
Post back here if you can or can't read the file system.
sstar said:
If you can't read any files and it is broken I doubt that they will be able to either which would mean they would send you a refurbished one ie newish. Worst case they find out and send it back unrepaired . I had one that may have had beer spilt over it and when I sent back and asked what was happening they said it was liquid damage and that I would get it back not fixed or a refurb . I got lucky .
Post back here if you can or can't read the file system.
Click to expand...
Click to collapse
ok,
I connected TP to my PC & got the "found new hardware" message & then it searches for quite a while for the drivers - which eventually fails after a long search (see attached pic). I have the novacom, web os & cm7 & cm9 files already on my pc but it failed to find the fore-mentioned drivers?
I also attach a pic of the crack/piece broke off at the lhs speaker (at bottom of TP)
I bought the TP in Argos on 26/8/11 & have a copy of receipt, however I never registered it with HP but I'm sure it is still in the "warranty period"?
Any ideas?
further update.....
Hi again & thanks for your time, patience & help......
I tried it a 2nd time (pressing other volume control button, home button & power) & the same "Found new hardware" message came up, but this time it looked for Palm driver too.
Again it failed to find both drivers - please see attached pic
RCO20000 said:
ok,
I connected TP to my PC & got the "found new hardware" message & then it searches for quite a while for the drivers - which eventually fails after a long search (see attached pic). I have the novacom, web os & cm7 & cm9 files already on my pc but it failed to find the fore-mentioned drivers?
I also attach a pic of the crack/piece broke off at the lhs speaker (at bottom of TP)
I bought the TP in Argos on 26/8/11 & have a copy of receipt, however I never registered it with HP but I'm sure it is still in the "warranty period"?
Any ideas?
Click to expand...
Click to collapse
Well we all know that the tablets suffer from cracks by the speakers , headphone and USB jacks so I am sure this is something that happened ages ago .
With the hp connected to your computer in the start menu type in disc management and when that pops up select it . This will show your c drive and any other drives connected to it ,ie the hp if it can see it .*
What do you see if its just your c drive fine , if it shows the hp as well what is it saying about the partition ?
sstar said:
Well we all know that the tablets suffer from cracks by the speakers , headphone and USB jacks so I am sure this is something that happened ages ago .
With the hp connected to your computer in the start menu type in disc management and when that pops up select it . This will show your c drive and any other drives connected to it ,ie the hp if it can see it .*
What do you see if its just your c drive fine , if it shows the hp as well what is it saying about the partition ?
Click to expand...
Click to collapse
ok,
On my Vista PC, I searched on the start menu both "disc management" & "disk management" & they gave me a load of search results (word & text documents, email messages etc from the C:\ drive) but nothing else i.e. no HP
I'm going to try & send back to HP & if I get a replacement refurb then I will be delighted.
Did you get on to HP in UK/Europe or had you to go through the USA? I don't know which to try etc
RCO20000 said:
ok,
On my Vista PC, I searched on the start menu both "disc management" & "disk management" & they gave me a load of search results (word & text documents, email messages etc from the C:\ drive) but nothing else i.e. no HP
I'm going to try & send back to HP & if I get a replacement refurb then I will be delighted.
Did you get on to HP in UK/Europe or had you to go through the USA? I don't know which to try etc
Click to expand...
Click to collapse
Uk / call centre pm sent .
---------- Post added at 10:52 PM ---------- Previous post was at 10:36 PM ----------
Uk Phone #0207 660 0950 for HP repair/technical support which is the department you need.
Call if you want me talk through how to open disc management.
regards
Saul
sstar said:
Uk / call centre pm sent .
---------- Post added at 10:52 PM ---------- Previous post was at 10:36 PM ----------
Uk Phone #0207 660 0950 for HP repair/technical support which is the department you need.
Call if you want me talk through how to open disc management.
regards
Saul
Click to expand...
Click to collapse
Thanks Saul,
I'm off work tomorrow & will call that number.
Thank you for your advice & help, it's greatly appreciated.
Hi Saul,
HP finally came back to me i.e. they sent me back a reconditioned TP which works beautifully and they also repaired the crack too.
I'm very happy & thank you once again for your help & advice :good:
RCO20000 said:
Hi Saul,
HP finally came back to me i.e. they sent me back a reconditioned TP which works beautifully and they also repaired the crack too.
I'm very happy & thank you once again for your help & advice :good:
Click to expand...
Click to collapse
Great news I am really pleased for you, no crack as you got a reconditioned one which should also give you an extra 3 months warranty , which hopefully you won't need .
All the best :good: