Related
Ok so I bought a clear case here And while working, I was inspired by A black and silver Ford GT sitting in our shop. Here are the results.
that looks pretty good. may i ask where did you buy your case.
eBay
You can buy it from eBay a seller "e2" in Hong Kong, but shipping just about a full month. I bought 2 and am using none of them. They are garbage because the holders (places where plastic pieces stickout) will scratch your phone no matter what. Overtime, the places where the case is held on the phone will be pressed leaving the paint on the phone depressed and scratched. Otherwise it will protect the phone real good.
GQ8125 said:
You can buy it from eBay a seller "e2" in Hong Kong, but shipping just about a full month. I bought 2 and am using none of them. They are garbage because the holders (places where plastic pieces stickout) will scratch your phone no matter what. Overtime, the places where the case is held on the phone will be pressed leaving the paint on the phone depressed and scratched. Otherwise it will protect the phone real good.
Click to expand...
Click to collapse
They are not the highest in quality, and it took ten days shipping. But it sounds like you need to trim the "flash" around the tabs, you can also cut the tabs off and use little pieces of 2-sided tape, which will solve all of your mentioned problems.. for less than $5.00 and you can paint 'em any color you want, I ain't complaining!
http://cgi.ebay.com/Crystal-clear-c...ryZ48677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
VERY NICE PIMP! Very nice indeeed. an affortable and less dodgy way to do it
What paint you used? And sorry if I am blind, but you painted the cases you bought, not the phone itself, right ?
And BTW, looks ...WOOW
Nice job!
that reminds me of a friend of mine who once owned one of the cheapest polish cars (http://en.wikipedia.org/wiki/Polski_Fiat_125p) and painted id in similar way (actually he made quite lot of modding inside as well, including chrome-metallic parts that resembled washing machine in a way
oh well, there's been a lot of fun with this piece of junk... and the guy's nickname is still "Viper" ;]
oh yeah. i forgot to mention i like this mod a lot, looks very cool!!
anichillus said:
What paint you used? And sorry if I am blind, but you painted the cases you bought, not the phone itself, right ?
And BTW, looks ...WOOW
Nice job!
Click to expand...
Click to collapse
I am a Developmental Marketing Technician for Ford Motor Co. I pulled the "Paint Codes" from the door of the GT in the Third Picture. And used PPg enamel paint. I think any paint will work?! And yes I painted the inside. I screwed up the stripes (they should be wider and closer together). But I was in a hurry, I did it on my lunch hour, and still had time to eat! The paint looks really good!! The clear Plastic makes it look like a super thick clear-coat!! I spent a little time on a bench buffer with it. But the paint will never scratch, because it is inside!!
[HINT]
Oh yeah, a little Tip if you decide to try!!! After spraying the inside, no matter how well you mask it, you will end up with a mist of paint on the outside. A little polishing compound and a soft rag removes it like magic!!
Here is a Link to a picture of the case without the phone
congratulations
anione knows if this clear case exist for i- mate k-jam or qtek 9100??
COGRATULATION AGAIN YOU GIVE ME A GREAT IDEA
badbert said:
They are not the highest in quality, and it took ten days shipping. But it sounds like you need to trim the "flash" around the tabs, you can also cut the tabs off and use little pieces of 2-sided tape, which will solve all of your mentioned problems.. for less than $5.00 and you can paint 'em any color you want, I ain't complaining!
http://cgi.ebay.com/Crystal-clear-c...ryZ48677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Pardon my poor language.. but what do you mean by "flash"?
Just dropped my phone a few hours ago and extremely upset... Luckily it was in its case but a coupla corners still got damaged
I was about to purchase a replacement housing but seeing this post, this would be a much cheaper alternative... Just gotta think of a theme now and find an artist...
Do you know if anyone sells it without that circle on the back?
Tsuioku said:
Pardon my poor language.. but what do you mean by "flash"?
Just dropped my phone a few hours ago and extremely upset... Luckily it was in its case but a coupla corners still got damaged
I was about to purchase a replacement housing but seeing this post, this would be a much cheaper alternative... Just gotta think of a theme now and find an artist...
Do you know if anyone sells it without that circle on the back?
Click to expand...
Click to collapse
Flash means when a plastic piece is cast, a small amount of plastic is left over that needs to be trimmed, or it could leave a jagged edge.
The circle on the back gives it a stable base when you lay the phone down...
could you share the gt theme?
inneyeseakay said:
could you share the gt theme?
Click to expand...
Click to collapse
Sorry I missed your post hope you enjoy it!!
man, why dont they sell these cases in the stores?????
that's a pretty damn good job, nice work!!
My wizzard 's casing is pretty beat up due to me dropping it, just laying it down on concrete, etc. I'm really thinking about actually sanding and 'polishing' the body of it to make it more shiny/get rid of scratches....and then buy a hardcase to go over that...
Wow... tahts the nicest case i've ever seen. Nice job... you should resell your case... =]
I did the same thing(well, solid black). It looks awsome from the front, but I cant get the back to really fit to the phone. I don't know if its my phone or if I just got a bad case.
I think I would have a little trouble returning it painted black though!
for those of you who like to drop your phone in the toilet:
Completely submerged phone in water
http://www.youtube.com/watch?feature=player_embedded&v=7Ama47RGdL4
http://www.youtube.com/watch?feature=player_embedded&v=Ln0daAowdJI
Only a few devices are supported now but as they get started I'm sure they'll include more phones...this thing is amazing, I would pay to have my phone water proofed for around 60 dollars is what is listed on their site.
www.liquipel.com
http://www.liquipel.com/liquipel/
wish they had it for our phones, hopefully soon , wonder if i can call them and see if they can do our phone!!!
I was gonna send my mytouch 4g to them, but then I got the Amaze... now I gotta wait... One thing that's good is that I have a backup phone once I send my phone to them.
I just don't see how that's possible if they don't cover the ports that give access to the inside of the phone.
Considering our ports on our phone lead right into our battery cover and all of our internal components.
nguyendqh said:
I just don't see how that's possible if they don't cover the ports that give access to the inside of the phone.
Considering our ports on our phone lead right into our battery cover and all of our internal components.
Click to expand...
Click to collapse
nano technology, gets everywhere in the phone....1/1000 as thick as human hair.
seansk said:
nano technology, gets everywhere in the phone....1/1000 as thick as human hair.
Click to expand...
Click to collapse
What do you think though? Legit? Doable?
Guess we won't know til we can test it. Lol.
nguyendqh said:
What do you think though? Legit? Doable?
Guess we won't know til we can test it. Lol.
Click to expand...
Click to collapse
its legit, but I don't know if they'll do our phones yet, there's only a small list, iphone a a bunch of HTC's like evo, but not our phone yet, if we call them maybe they'll do it...I don't see why not.
This technology has been in the works for a while. I remember reading about it and seeing videos of it in action a while back, like at least 5 years ago. I'm super excited to see that it's finally coming around!
It's basically a spray, or a vapor, or a liquid itself, that they spray on or dunk the electronics in. It coats literally EVERYTHING inside it. Imagine dipping your phone in thick paint and letting it dry. Same concept but this is a nano thin layer of a clear substance that repels water. Amazing stuff.
I'm definitely going to give it a shot if their site ever loads and I can find out how much it costs. Haha
danielelias said:
This technology has been in the works for a while. I remember reading about it and seeing videos of it in action a while back, like at least 5 years ago. I'm super excited to see that it's finally coming around!
It's basically a spray, or a vapor, or a liquid itself, that they spray on or dunk the electronics in. It coats literally EVERYTHING inside it. Imagine dipping your phone in thick paint and letting it dry. Same concept but this is a nano thin layer of a clear substance that repels water. Amazing stuff.
I'm definitely going to give it a shot if their site ever loads and I can find out how much it costs. Haha
Click to expand...
Click to collapse
costs 60 dollars, but they don't list amaze as one of the phones they support, I'm going to call them right now see if they can do it.
seems cool. waiting for the amaze to be one day available
I have seen some other companies doing the same thing, except with car windshields. It's like a high-tech rainex. Very cool, didnt thing it would be out for phones this soon, but that's incredible! I wonder if you will be able to remove the housing on your phone after it get's sprayed with this stuff, and it still be waterproof upon putting it back together. like nguy said earlier it has to seal off the ports, and dis-assembling it would definitely break this seal.
youngunner-2 said:
I have seen some other companies doing the same thing, except with car windshields. It's like a high-tech rainex. Very cool, didnt thing it would be out for phones this soon, but that's incredible! I wonder if you will be able to remove the housing on your phone after it get's sprayed with this stuff, and it still be waterproof upon putting it back together. like nguy said earlier it has to seal off the ports, and dis-assembling it would definitely break this seal.
Click to expand...
Click to collapse
Yes you can, they did this with and HTC device and there's a video of it on their website on the bottom. you can take off the back, the battery, heck you can dissasseble put it in water and put it back, IT WILL STILL WORK. This nano spray goes into every SINGLE CREVICE OF YOUR PHONE. it is nano technology!!
Sound or heating issues ?
xManMythLegend said:
Sound or heating issues ?
Click to expand...
Click to collapse
This does not affect the phone in any way...its nano...search nano and see how small it is, 1 nanometer = 1.0 × 10-6 millimeters, its at least 1 millionth of a millimeter or smaller... you can see on a ruller how big a millimeter is. does that answer your questions, if won't affect anything, just repel water. if it doesn't affect the conductance between the battery and the phone, it really wont' affect anything else...but call and ask them, i'm sure you'll get the same answer
another video
http://www.youtube.com/watch?feature=player_embedded&v=7Ama47RGdL4
I am guessing that all this does is protect the electronic components from shorting out or corroding if they are exposed to liquids. I also assume that if you submerge the phone, it will still sink and fill with water and you will still get water under the screen and have to dry it out, etc.
Finally, and I didn't read their web site, but does the process void the warranty?
I watched a couple videos on this tested on the iphone and thunderbolt and it did work. i wouldnt want to test it unless i had a backup or something. it would be safe to have just cause though
tedya said:
I am guessing that all this does is protect the electronic components from shorting out or corroding if they are exposed to liquids. I also assume that if you submerge the phone, it will still sink and fill with water and you will still get water under the screen and have to dry it out, etc.
Finally, and I didn't read their web site, but does the process void the warranty?
Click to expand...
Click to collapse
what does this have to do with warranty? how would HTC know?
seansk said:
what does this have to do with warranty? how would HTC know?
Click to expand...
Click to collapse
I asked about the warranty because I had not seen the video on how this is applied to the phone. I have since seen that. So, if that is how it is applied, every phone should be supported soon.
Believe me, I am the same way; How would HTC know? I guess I am just not convinced that the $60 application is worth it. With any phone, i see it as paying $60 for this application, something other than water damage occurs and I get the phone replaced. If I understand this right, now I have to get this application done again for another $60 because my replacement is a different phone.
If not already, this company should be selling their technology to the OEM. I think the Moto Droid Razr already has this or something similar.
I know many of you will disagree, but this is just plain "gimmicky". I would only consider this if I didn't pay for monthly insurance. I am 10x more likely to drop and break the phone than I am to get water damage. I think most people are.
According to their own terms of use, they only warrant/guarantee that they will apply the coating, not that it will work.
Does anyone reading here work at a cell phone store who can say what the most common reason for a replacement is? I'd be curious.
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.
Okay guys. As you all know, you can't paint aluminum. Spending a bit of time on Oakley forum, it dawned on me that you can duracoat or cerakote a phone. I have a gold a 2017u that is begging for a refinish. I hate gold, but love this phone. Just curious whether anyone has attempted such or if I will be the first monkey launched into space. Just had my X metal XX refinished and would love the gold to be gone. If we had a hardware modding section, I'd post there. Lol.
What about the antenna bands? Fingerprint reader? What about the plastic speaker covers? Most people, including me, are going to tell you that it's just not worth it. This is especially true if it's just for a color change and not to cover scratches. I actually just bought a gold A7 because I think they look nicer in a case than the grey ones do. I'm normally one for subdued colors but in this case the color of the phone is just an accent color. If you do it, pick a color that isn't offered to make it interesting and post the pictures here.
kitcostantino said:
Okay guys. As you all know, you can't paint aluminum. Spending a bit of time on Oakley forum, it dawned on me that you can duracoat or cerakote a phone. I have a gold a 2017u that is begging for a refinish. I hate gold, but love this phone. Just curious whether anyone has attempted such or if I will be the first monkey launched into space. Just had my X metal XX refinished and would love the gold to be gone. If we had a hardware modding section, I'd post there. Lol.
Click to expand...
Click to collapse
Lol I can't count how many times I've been tempted to take a piece of sandpaper and at least get rid of the gold finish...
The good thing about the construction of this thing is that once you take it apart, only the FP reader and the camera lens remain there. I guess you can get the lens out with a little bit of pressure and take that gold ring off. The reader has a piece of what seems to be tape upon it, but you may as well leave it there. and having the two antenna lines of another color may even look nice
I really want to see the final product...
I'm torn between durabake and duracoat aerosol. I'm fairly confident that powered off, the 200 degrees f would not melt anything plastic on the phone. I wish I knew more about temperature tolerances. Also. I'm torn between primary red and nwu blue. The aerosol kit doesn't require baking, so likely that is a safer option.
Update: duracoat aerosol ordered.
kitcostantino said:
I'm torn between durabake and duracoat aerosol. I'm fairly confident that powered off, the 200 degrees f would not melt anything plastic on the phone. I wish I knew more about temperature tolerances. Also. I'm torn between primary red and nwu blue. The aerosol kit doesn't require baking, so likely that is a safer option.
Update: duracoat aerosol ordered.
Click to expand...
Click to collapse
Wait, you are dissembling the phone right? I vote blue but it's too late.
lol. yes. and i ordered the nwu blue.
honestly, i think it will be a great project. if it works, it will be the motivation to acquire a 64/128. (not too motivated on that presently bc of the hideous gold.) NWU blue should be worlds better than ghetto gold.
i plan to take the phone apart.
i plan to duracoat the speaker grills the same color. same thing on sim tray and the parts where the plastic antennae lines are. i honestly could pull off doing it w/o pulling it apart and taping/masking well considering it doesnt have to bake. but i feel like the pita of full disassembly may be worthwhile.
ive taken many many phones apart. so i am not squeamish there. i just am not certain that the fingerprint sensor and the sapphire glass on the camera are that hard to mask off. (eyes crappy slickwraps extras. lol)
edit: after watching this video:
, i *definitely* am disassembling. i am so stoked for a blue axon. i wish i could make a red decal to replace the logos.
kitcostantino said:
honestly, i think it will be a great project. if it works, it will be the motivation to acquire a 64/128. (not too motivated on that presently bc of the hideous gold.) NWU blue should be worlds better than ghetto gold.
i plan to take the phone apart.
i plan to duracoat the speaker grills the same color. same thing on sim tray and the parts where the plastic antennae lines are. i honestly could pull off doing it w/o pulling it apart and taping/masking well considering it doesnt have to bake. but i feel like the pita of full disassembly may be worthwhile.
ive taken many many phones apart. so i am not squeamish there. i just am not certain that the fingerprint sensor and the sapphire glass on the camera are that hard to mask off. (eyes crappy slickwraps extras. lol)
edit: after watching this video:
, i *definitely* am disassembling. i am so stoked for a blue axon. i wish i could make a red decal to replace the logos.
Click to expand...
Click to collapse
Well, I took apart my Moto G 2 and while these 2 phones are worlds apart in terms of build quality, all it took was a soft piece of wood and some force to get the camera lens to pop off. was riddled with scratches. Shouldn't be too hard to get this one off too, maybe with some heat.
You could use one of those crappy skins (only the camera one, anyways) to put on the backside lens if you can see the PCB through once you get the gold ring off, assuming you can't just paint it and put it again. I'm sure one of those brands can ship you only what you want, don't remember the name though
I guess you'll have to sand the whole body for the paint to stick to the aluminum and stay there with all the handling? If you can take some pictures of the sanded backside I'd be grateful, cause I think i'll just sand it, paint whatever's left and let it be
The FP sensor should be easy to modify, JerryRigEverything always scratches fp sensors with a blade (like you'd ever get to that point lol) abd they always keep working, so if you need to sand it so that the paint gets stuck to the plastic, you can. I don't even know what those paints are, they probably don't even import them here in Argentina. But from what I'm deducing they won't stick to plastic will they?
Also, I'd advise you to be real careful with the fabric thingy that covers the speakers. I broke one and lost the other one, so I have to clean the speakers with a magnet every once in a while... (workshop fills them up with iron dust). and something JerryRigEverything didn't mention on the disassemble video was that the power button is free-floating once you take it apart (it can't fall off though) and when I was putting the phone together the chassis somehow bent a little bit. Nothing critical but sure looks bad
Choose an username... said:
Well, I took apart my Moto G 2 and while these 2 phones are worlds apart in terms of build quality, all it took was a soft piece of wood and some force to get the camera lens to pop off. was riddled with scratches. Shouldn't be too hard to get this one off too, maybe with some heat.
You could use one of those crappy skins (only the camera one, anyways) to put on the backside lens if you can see the PCB through once you get the gold ring off, assuming you can't just paint it and put it again. I'm sure one of those brands can ship you only what you want, don't remember the name though
I guess you'll have to sand the whole body for the paint to stick to the aluminum and stay there with all the handling? If you can take some pictures of the sanded backside I'd be grateful, cause I think i'll just sand it, paint whatever's left and let it be
The FP sensor should be easy to modify, JerryRigEverything always scratches fp sensors with a blade (like you'd ever get to that point lol) abd they always keep working, so if you need to sand it so that the paint gets stuck to the plastic, you can. I don't even know what those paints are, they probably don't even import them here in Argentina. But from what I'm deducing they won't stick to plastic will they?
Also, I'd advise you to be real careful with the fabric thingy that covers the speakers. I broke one and lost the other one, so I have to clean the speakers with a magnet every once in a while... (workshop fills them up with iron dust). and something JerryRigEverything didn't mention on the disassemble video was that the power button is free-floating once you take it apart (it can't fall off though) and when I was putting the phone together the chassis somehow bent a little bit. Nothing critical but sure looks bad
Click to expand...
Click to collapse
From what i understand, Duracoat will bond to any material, so long as it is degreased and prepped (sanded in this scenario) . So plastic is in. (yay)
i plan to spray the buttons but i do not plan to remove them unless i have to. even the full disassembly is not that hard.
I dont necessarily plan to paint the fp sensor unless i know the finish will not impede functionality. Duracoat may break the functionality, so i might have to be creative. its funny you mention jerryrigeverything's video bc that was my proof of concept for being able to sand the sensor down to not gold color.
on my Droid Turbo, i used to cover the capacitive buttons with clear self adhesive vinyl before i covered the screen with a Skinomi Tech skin. I may just sand the sensor enough for it to no longer be gold and grab some clear self adhesive vinyl to color match, provided that does not break functionality.
as far as sanding/prepping, i plan to emulate the process used in the video here:
and i also plan to take pics and make instructions for the whole process.
The Axon 7 forums dont have any physical mod posts, so it will be nice to put one out there as it is the best device i have owned so far. I used to be a Moto man. but they lost me with the novelty of "mods" and Verizon making boot loaders permanently locked.
My Duracoat should be here by the 30th. i really wish i could buy another color midframe that isnt gold, but ZTE parts are a pain to find.
kitcostantino said:
My Duracoat should be here by the 30th. i really wish i could buy another color midframe that isnt gold, but ZTE parts are a pain to find.
Click to expand...
Click to collapse
Any news? I really wanna see that phone
lol. im watching a couple of 128/6 atm bc one can should do two. depending on how that pans out, i may be able to start on it this weekend.
no news yet. i missed out on the 128gb i was watching. honestly, the hardest part is gonna be having to use my Droid Turbo for a week while the Duracoat cures. fortunately, Turbo has some awesome devs. im still paranoid the midframe will chip easily on the sides, but even after i duracoat it, i will still use a case.
i also have to decide by what means to prep the surfaces. i figure a fine sandpaper, then the truestrip that came with the duracoat. masking the round parts is going to be a pita.
so in essence, its close, but im still deciding my plan of attack. after the holiday, i should be ready to start.
well, i have the turbo updated and im about to go pick up my sandpaper. the camera ring (if i cant find how to remove it) i am leaving gold. i had initially thought id sand the gold off of the camera, but its under the glass. ordered dbrand skins for the camera. if all works as planned, that is a compromise im willing to accept.
the plan as it stands: (commencing this evening)
1) Sand finish of back, sides, mid-frame after disassembly.
2) clean all with Tru Strip (included with Duracoat Aerosol kit).
3) duracoat 5 layers, heat flashing in between coats.
4) (hardest step) leave alone for a week and allow to cure.
I will add pics or a vid when and if time allows while im in the process.
Im using 3m Sandpaper and a sanding block i picked up from Walmart. totally forgot painters tape. back to the store i go. camera on Turbo pales in comparison to Axon 7, so bear with me in this process.
gold finish is thicker than anticipated. i cant get down to bare metal. might say screw it and go with what i got.
400 grit takes forever. camera flash is dead. i tore the black material under the fingerprint sensor. totally pulled the trigger too soon. gonna paint as is. eying broken ones on ebay. if all else goes well (prepped to duracoat atm) either i will live w/o flash and fingerprint sensor (bc of my own haste) or ill buy a grey A7. either way, this back will look great on another axon 7.
also, the gold on the camera lens is a sticker on the bottom side. popped out, and when i went to grab it, thats when the flash fell out.
its probably doomed to look like crap, but progress.
more
verdict: bad ideas ruined a great project. axon is dead. at least, locked in a boot loop. buttons are stuck. buying grey now. lol. lessons learned.
Try using a razor blade to scrape the inside edges of the button holes.
Nooooo!!!!
I have only had my phone for 2 weeks and I was sitting outside of Starbucks with my phone on my lap, and this yellow jacket bee kept flying around me. So I stood up to get away from it, while forgetting my phone was on my lap. CRASH! My V30 without a case falls off my lap about 20 inches down onto the cement.
It caused a small spider web crack in the corner of the back glass. One of then cracks extends to the camera lens area. On thr bright side the screen is fine and the camera lens is fine with no cracks. Plus its only mostly the corner thats cracked on the back. But still, it really really sucks since I just got this phone.
I know some of you are thinking I was stupid for not having a case. Maybe so, but keep in mind I pretty much never had cases on my 6P or my S7 Edge. I only dropped my 6P once real bad on a hard surface (fell out of pants with a smaller pocket while sitting) which only left a scuff on the edge with the display fine, and never once dropped my S7 on a hard surface in over a year with it. So I have always been super careful with my phones. Never dropping my phone in years that was a result of my clumsiness or carless.
I guess its just a matter of time though no matter how careful you are handling your phone. Its bound to fall somehow when its not your fault. Like sliding off a slippery surface, falling out of a small pocket, or similar. Anyways I called a local phone repair shop and the good news is the back glass is only $70-$75.
I don't think I am going to get it done just yet since the display is fine, camera lens is fine, and its only the corner of the back. But I probably will eventually before I resell the phone in 1-2 years. Anyways kind of disappointed a military certified phone cracked for such short fall. This is why I prefer metal backed phones so much more. Anyways hopefully this info of how easy it cracks and the cost to replace the back out there being pretty cheap helps some others out there.
*Puts case back on my V30*
Yeah, I watched a couple of videos on what happens to GG 4 & 5 with drop tests and decided mine would stay in a case. Added bonus of keeping finger prints off of the actual phone back and just on a plastic case.
I have several cases I've bought to put on my LG V30 when I actually buy the phone. You can buy very good cases for even a couple of dollars on ebay. I started the LG V30 cases thread, because most people don't know that.
You can even buy clear cases if you still want to show off the phone.
Cases for LG V30
https://forum.xda-developers.com/lg-v30/accessories/lg-v30-t3667430
Just putting that out there for people who still need a case. At those prices, order 2 or 3!
ChazzMatt said:
You can even buy clear cases if you still want to show off the phone.
Cases for LG V30
https://forum.xda-developers.com/lg-v30/accessories/lg-v30-t3667430
Just putting that out there for people who still need a case. At those prices, order 2 or 3!
Click to expand...
Click to collapse
Yeah I already have a case, I just didn't have it on because I don't really like having one. I got it on now though. Ita a slim fitting case by Lumion. I never heard of this case company before but I really like it. I'm probably going to give the Spigen Crystal case a try too.
AndroidPurity said:
Yeah I already have a case, I just didn't have it on because I don't really like having one. I got it on now though. Ita a slim fitting case by Lumion. I never heard of this case company before but I really like it. I'm probably going to give the Spigen Crystal case a try too.
Click to expand...
Click to collapse
I'm very sorry for your accident. Ugh.
At least you know it can be repaired easily.
If the glass is still smooth, you can always put a skin over it.
This is one concern causing me pause in my purchase. Why there can't be a nice carbon fiber replacement back for this phone, I don't know. Motorola had a good idea going with the "design your own phone" during the Droid Turbo / Turbo 2 days, they just gave up on it too early.
Nay Tyzon said:
This is one concern causing me pause in my purchase. Why there can't be a nice carbon fiber replacement back for this phone, I don't know
Click to expand...
Click to collapse
b'cause it's not waterproof, or your can't glue it like glass
Billy Madison said:
b'cause it's not waterproof, or your can't glue it like glass
Click to expand...
Click to collapse
That's the beauty of carbon fiber composites. The resin it's molded in is waterproof, gluing is about the only way to attach it to anything, it can be built up as thick as needed to create a reliable sealing edge or stiffness to the back. And it's radio transparent, so no issue with wireless charging. It can be textured, to make it more grippy.
The ccf aesthetic isn't for everyone, I get that, but it would be great as an option, and would be completely workable.
That is a bummer that it cracked. I am super impressed by the strength of this device though, my embarrassing story about it. Bought a new TV for my living room, decided I needed to take my old TV down to the basement and thought I could wrangle the 60" TV by myself, took two steps down and slipped, fell super hard all the way down the stairs with my phone in my back pocket. Huge bruises on my back, butt, arm and legs, the phone I was positive was a goner. Took it out of the case and to my amazement not a scratch and the glass looks perfect, however there is a size-able dent on one side of the phone and it is pushing the screen out. Everything works perfect and like I said, it did not crack at all, I am not a small guy, between me and the TV it took a 300 lb hit on the edge of a step and then several more hits down the stairs.
Of course I went to T-Mobile and they laughed and said "We can't take a bent phone back" luckily I am still in the 14 days grace period and will be adding insurance so I can get a replacement. It works, but is a little annoying to use this way. And to end the story on a high note, I did save the TV, did not let go of it!
Circledog said:
That is a bummer that it cracked. I am super impressed by the strength of this device though, my embarrassing story about it. Bought a new TV for my living room, decided I needed to take my old TV down to the basement and thought I could wrangle the 60" TV by myself, took two steps down and slipped, fell super hard all the way down the stairs with my phone in my back pocket. Huge bruises on my back, butt, arm and legs, the phone I was positive was a goner. Took it out of the case and to my amazement not a scratch and the glass looks perfect, however there is a size-able dent on one side of the phone and it is pushing the screen out. Everything works perfect and like I said, it did not crack at all, I am not a small guy, between me and the TV it took a 300 lb hit on the edge of a step and then several more hits down the stairs.
Of course I went to T-Mobile and they laughed and said "We can't take a bent phone back" luckily I am still in the 14 days grace period and will be adding insurance so I can get a replacement. It works, but is a little annoying to use this way. And to end the story on a high note, I did save the TV, did not let go of it!
Click to expand...
Click to collapse
A quick and healthy recovery!
My wife had dropped her v30 TWICE already in a week... Both times it luckily hit a corner and no glass cracked or scratched. Just a scuff on the metal of each bottom corner. So damn lucky with that so far... her case finally showed up the day after the second drop.
AndroidPurity said:
Nooooo!!!!
I have only had my phone for 2 weeks and I was sitting outside of Starbucks with my phone on my lap, and this yellow jacket bee kept flying around me. So I stood up to get away from it, while forgetting my phone was on my lap. CRASH! My V30 without a case falls off my lap about 20 inches down onto the cement.
It caused a small spider web crack in the corner of the back glass. One of then cracks extends to the camera lens area. On thr bright side the screen is fine and the camera lens is fine with no cracks. Plus its only mostly the corner thats cracked on the back. But still, it really really sucks since I just got this phone.
I know some of you are thinking I was stupid for not having a case. Maybe so, but keep in mind I pretty much never had cases on my 6P or my S7 Edge. I only dropped my 6P once real bad on a hard surface (fell out of pants with a smaller pocket while sitting) which only left a scuff on the edge with the display fine, and never once dropped my S7 on a hard surface in over a year with it. So I have always been super careful with my phones. Never dropping my phone in years that was a result of my clumsiness or carless.
I guess its just a matter of time though no matter how careful you are handling your phone. Its bound to fall somehow when its not your fault. Like sliding off a slippery surface, falling out of a small pocket, or similar. Anyways I called a local phone repair shop and the good news is the back glass is only $70-$75.
I don't think I am going to get it done just yet since the display is fine, camera lens is fine, and its only the corner of the back. But I probably will eventually before I resell the phone in 1-2 years. Anyways kind of disappointed a military certified phone cracked for such short fall. This is why I prefer metal backed phones so much more. Anyways hopefully this info of how easy it cracks and the cost to replace the back out there being pretty cheap helps some others out there.
*Puts case back on my V30*
Click to expand...
Click to collapse
Sorry to hear that. I couldn't stand using a cracked phone so I really feel ya.
Good luck with the repairs!
Sent from my LG-H932 using Tapatalk
NeutronBomb said:
My wife had dropped her v30 TWICE already in a week... Both times it luckily hit a corner and no glass cracked or scratched. Just a scuff on the metal of each bottom corner. So damn lucky with that so far... her case finally showed up the day after the second drop.
Click to expand...
Click to collapse
Whyyyy couldn't have mine done that?!
Actually I think the sides of this phone are super reinforced. Way more than more glass phones. I think mine just fell at the absolute worst angle that hit it just right. Just thankfully it was not the display!
psawjack said:
Sorry to hear that. I couldn't stand using a cracked phone so I really feel ya.
Good luck with the repairs!
Click to expand...
Click to collapse
Thanks! I also found the glass back is on Ebay for only about $18 and comes with the little tool to replace it. So I might just do that myself. I watched a video of how to take the back off.
I only have 2 worries if I do it myself.
1.) Making sure the new glass back seals on tight enough still be at least mostly water proof and
2.) Removing the finger print sensor from the old back to the new back. The video I watched doesnt show how to remove the finger print sensor. But once I find a video on someone removing and reattaching the finger print sensor, then I will pull the trigger for the $18 glass back.
So much for military certified durability :laugh: :crying:
Also you'll lose the ip68 rating by replacing that yourself most lowly just a heads up. Watch the video of Jerry rig everything. When he made a clear v30. Really good on how to open phone
Happened to one of the phones on my account. Fell about 3 feet on a wood floor and the back has a hairline crack. I'll skin it, put it in a case and be done with it.
Circledog said:
.......Of course I went to T-Mobile and they laughed and said "We can't take a bent phone back" luckily I am still in the 14 days grace period and will be adding insurance so I can get a replacement. It works, but is a little annoying to use this way. And to end the story on a high note, I did save the TV, did not let go of it!
Click to expand...
Click to collapse
That's quite a story! That should be in a V30 durability ad. Opening shot of the big dent and bulged screen with the phone speaking in "android voice" saying, "yeah, I took quite a beating, but you should see the other guy!" Then a fade in shot of you looking all sheepish and bruised from head to toe with a final fade out slow-mo reenactment of the fateful tussle.
stuartmc said:
That's quite a story! That should be in a V30 durability ad. Opening shot of the big dent and bulged screen with the phone speaking in "android voice" saying, "yeah, I took quite a beating, but you should see the other guy!" Then a fade in shot of you looking all sheepish and bruised from head to toe with a final fade out slow-mo reenactment of the fateful tussle.
Click to expand...
Click to collapse
Lol, love it, I will have to email LG!
Circledog said:
Lol, love it, I will have to email LG!
Click to expand...
Click to collapse
Do it! This is too good to pass over.