Related
Does anyone know the current bell mobility PRL? My phone seems to be stuck forever in roaming mode. I flashed DCD's bell ROM and my phone is constantly stuck in roaming mode and it shows the carrier as Sprint. Any ideas or do i need to re-program my phone?
origins81 said:
Does anyone know the current bell mobility PRL? My phone seems to be stuck forever in roaming mode. I flashed DCD's bell ROM and my phone is constantly stuck in roaming mode and it shows the carrier as Sprint. Any ideas or do i need to re-program my phone?
Click to expand...
Click to collapse
Check this site:
http://www.corolada.com/prl/
Bell PRL?
quantumforce1 said:
Check this site:
http://www.corolada.com/prl/
Click to expand...
Click to collapse
Yeah i took a look at it earlier, it's only american carriers
origins81 said:
Yeah i took a look at it earlier, it's only american carriers
Click to expand...
Click to collapse
Ahh -- sorry dude. Wish I could have helped.
If a Bell user with a working device has QPST installed on their PC, we could extract their PRL to share with everyone. (and i'd like a copy for my kitchen)
How do I extract the PRL? I haven't flashed the new rom yet and I'm a Bell Mobility user.
Cheers,
Tom
SUCCESS!!
So after hours of searching, it hit me like a ton of bricks....The PRL file has to within the stock rom
After that it was a case of looking up the current PRL
so here you go Bell users.... FLASH AWAY!!!
PS: Remember to delete the .txt extension before upgrading
I am a Bell user, and I flashed yesterday, but I don't think I had any issues with roaming. How can you tell if it's roaming?
The EV icon is replaced by the roaming triangle, normally the phone will warn you that you are in roaming mode if you get an incoming call or if your data connection is about to commence provided you have the roam guard settings set to ON
origins81 said:
Usually the EV icon is replaced by a dark triangle, pretty much after that the phone will constantly warn you that you are in roaming mode if you get an incoming call or if your data connection is about to commence provided you have the roam guard settings set to ON
Click to expand...
Click to collapse
Thank you, I don't think mine is roaming then. The phone will tell you with a verbal message (similiar to "The number is long distance. You will now....") prior to you answering it then?
Bell Mobility Users
Bell mobility users who flash the new sprint rom will need to update their radio with the above prl otherwise your phone will constantly roam
How can I help? I heard dcd is looking for a PRL to add to his 3.0 kitchen for Bell Canada. But you will have to guide me cuz I don't know how to extract the PRL. I tried ##228# but it just asks me for an unlock code...
dcd1182 said:
If a Bell user with a working device has QPST installed on their PC, we could extract their PRL to share with everyone. (and i'd like a copy for my kitchen)
Click to expand...
Click to collapse
How do you do that? you what to share how2 please! i have the program i only missing how2 extract the PRL. Cheers
I'm with telus and I just do the old *22803 thing and it updates my PRL for me...
The latest version of the PRL is already posted on the first page and i'm sure DCD already has it by now
I have a Bell Mobillity PPC6800 as well. I had updated it with the latest official ROM from UTStarcom's website. Am i at a certain risk because of this if i try to use this latest Sprint radio on it ? (and the DCD 3.01 as well ?)
Any Bell user that took the plunge yet ?
Adi
adisor19 said:
I have a Bell Mobillity PPC6800 as well. I had updated it with the latest official ROM from UTStarcom's website. Am i at a certain risk because of this if i try to use this latest Sprint radio on it ? (and the DCD 3.01 as well ?)
Any Bell user that took the plunge yet ?
Adi
Click to expand...
Click to collapse
Already flashed the new radio and built my own rom using DCD's 3.0.0 kitchen. Got a crapload of ram to boot, GPS picks up really quick, and haven't had any lock ups, still testing bluetooth but has been all positives. Granted you flash correctly, there is no risk involved and this place is littered with tutorials
Good luck...
http://rapidshare.com/files/99219142/DCD_3.0.1_Bell.exe
It seems there is a lot of work going on for the 6800. I'm unfortunate enough to own a 5050 and I'm having a hard time getting information. I know that it wasn't offered with bell for very long.
My main objective is to unlock the GPS receiver (why does bell disable this stuff!?) Can someone point me in the right direction?
Kessler said:
It seems there is a lot of work going on for the 6800. I'm unfortunate enough to own a 5050 and I'm having a hard time getting information. I know that it wasn't offered with bell for very long.
My main objective is to unlock the GPS receiver (why does bell disable this stuff!?) Can someone point me in the right direction?
Click to expand...
Click to collapse
HTC 5050 A.K.A. Falcon A.K.A. Wallaby, try here
http://forum.xda-developers.com/forumdisplay.php?f=268
origins81 said:
Already flashed the new radio and built my own rom using DCD's 3.0.0 kitchen. Got a crapload of ram to boot, GPS picks up really quick, and haven't had any lock ups, still testing bluetooth but has been all positives. Granted you flash correctly, there is no risk involved and this place is littered with tutorials
Good luck...
http://rapidshare.com/files/99219142/DCD_3.0.1_Bell.exe
Click to expand...
Click to collapse
Everywhere I look I see people talking about problems with different radio versions...copying certain IDS...and it's got me a bit concerned, I'd rather not brick anything.
Would you mind, in step form, telling us how you flashed yours with your custom dcd there?
I'd really appreciate it.
I would prefer this thread not become a "I am getting XYZ HELP!" thread, because it would be off topic. But I know it runs the risk of that because I would like to talk about the choice of Roms that XV6800 owners have used and the pros and cons of them.
I'm pretty sure I've seen the following GPS enabled ROMS on the verizon phones: (in order of complexity)
1. Original leaked ROM
2. No2Chem's nueROM http://forum.ppcgeeks.com/showthread.php?t=17219
3. DCD's 2.3.2 http://forum.xda-developers.com/showthread.php?t=371314
4. nexvisions's http://forum.xda-developers.com/showthread.php?t=364043
This section is now expanded to include a longer list of relative information needed to prepair for this process:
I've seen the Easy update thread: (This thread flashes the unlocker and radio in a single step using a ROM installation designed ONLY for a Sprint phone. Some believe this is why ppl have the 15 minute delay before aquiring a signal.)
http://forum.ppcgeeks.com/showthread.phpHere ?t=17667
You can see documentation for DCD's update from a Verizon Customer here:
http://forum.xda-developers.com/showpost.php?p=1973238&postcount=536
Here are the stock roms for recovery purposes (Signed and sealed by Verizon -not rips)
http://forum.xda-developers.com/showpost.php?p=1845171&postcount=13
Here is an unlocker: (also includes exit bl; read the .bat file to learn a lot and get some useful CLI commands)
http://forum.ppcgeeks.com/showthread.php?t=9093
Here is the Titan relocker:
http://forum.ppcgeeks.com/showthread.php?p=125160
Radio ROM 3.27.00
http://forum.xda-developers.com/showthread.php?t=362563
"general flashing rule is to start device in bootloader mode first and then flash. Do NOT flash it while it is running WindowsMobile OS."
Here are the generic steps to peform a standard burn from stock (works for some but all numbers should be written down in preparation)
0. WRITE DOWN ALL INFO UNDER ##778
0.1 REMOVE YOUR MicroSD CARD NOW!!!
1. Flash 2.40 unlocker using the Titanunlocker.bat inside the rar file (all files should be extracted to a new directory)
2. Flash DCD 2.3.2 (or preferred rom) different roms will
3. Flash radio 3.27
4. after booting dial a *228 to get the latest programing
That's it. It should be that simple.
If you are stuck, you might just be in the boot loader, use this tool for Verizon phones only to exit the boot loader:
http://forum.ppcgeeks.com/showthread.php?t=9229
Here's how to recover when it is not:
1. Using a PC, format a microSD card to FAT32.
2. Using winrar or an unzipper, extract the *.nbh file from the ROM upgrade .exe.
3. Copy the *.nbh file to the formatted microSD card
4. Rename the file on the microSD card TITAIMG.nbh.
5. Insert the microSD card into the phone and reset into bootloader.
6. The phone will tell you to press the power button to flash the ROM; do so.
Going into bootloader mode: power, camera, reset all at once.
Hard reset: Press the two dot (bottom menu) keys and hit the reset button, release all after two seconds. (RUMOR: Leaving the SD card in the phone may result in the SD card content being wiped. I don't care to test the rumor.)
I've read loads of threads tonight. My problem is that most of this stuff is slanted to Sprint stuff. I'm creating this as a central place for Verizon update facts. I'd love to hear if things work or if things don't work.
I'm considering flashing my phone tomorrow, (didn't happen yet by choice) but will also be travelling starting that night. Obviously the smart thing to do would be do go without GPS on my adventures, but it would be soo cool to have it working for SxSW just for the geek factor. And that calls to me.
So, here are some of my myths and mythunderstandings:
1. Every Verizon customer who updates their radio has to call into verizon to re-authenticate their phone. But Verizon is pretty cool about that even if you say you were flashing your phone.
2. This is true even if you follow the steps in the easy guide and write everything down it tells you to write down because Verizon uses a GUID generated by the radio rom when it is used for the first time on your phone. Not all areas as of today not every area does this but most and soon all will. It depends upon where you are in their upgrade chains.
3. If you install Radio 3.27, you're a screwed verizon customer because resets (hard and soft) and power ons (?????) will no longer aquire a signal right away. You will be waiting for 15 minutes or longer before you can use your phone again and no one has a working solution to this for Verizon customers. This happens to EVERY verizon customer.
4. People have upgraded to the original leaked rom without a problem (and without that delay) and that allowed them to have working phones possibly because of one or all of the following:
a. It is signed by Verizon and you don't have to unlock your phone?
b. MAYBE it doesn't require the radio upgrade???? (FIRST REPLY STATES THE RADIO IS REQUIRED FOR ALL GPS ROMS)
c. Because it was built using only Verizon stuff it is missing whatever incompatible tool the other kitchens have in them????
d. Because it has WM 6.0 and 6.1 hasn't been tested with Verizon????
5. DCD's rom has all of the MS Office software as an installable option whereas No2Chem's excludes it. Don't know if this includes outlook or not.
6. Both of the Kitchens mentioned above will work with Verizon and they have options that allow you to choose Verizon as an install option branding your phone correctly.
So that is upgrading your verizon phone as I understand it. Am I off too far on anything? I've not seen reports of any bricks yet but I know that is always possible.
So who has tried what ROM and to what degree of success?
BrianLayman said:
I would prefer this thread not become a "I am getting XYZ HELP!" thread, because it would be off topic. But I know it runs the risk of that because I would like to talk about the choice of Roms that XV6800 owners have used and the pros and cons of them.
I'm pretty sure I've seen the following GPS enabled ROMS on the verizon phones:
1. Original leaked ROM
2. DCD 2.3.2 with 3.27 Radio upgrade
3. No2Chem
I've also seen the Easy update thread:
http://forum.ppcgeeks.com/showthread.php?t=17667
You can see documentation for DCD's update from a Verizon Customer here:
http://forum.xda-developers.com/showpost.php?p=1973238&postcount=536
I've read loads of threads tonight and my problem is that most of this stuff is slanted to Sprint stuff. I'm creating this as a central place for Verizon update facts. I'd love to hear if things work or if things don't work. I'm considering flashing my phone tomorrow, but will also be travelling starting that night. Obviously the smart thing to do would be do go without GPS on my adventures, but it would be soo cool to have it working for SxSW just for the geek factor and that calls to me.
So, here are some of my myths and mythunderstandings:
1. Everyone Verizon customer has to call into verizon to re-authenticate their phone. But Verizon is pretty cool about that even if you say you were flashing your phone.
2. This is true even if you follow the steps in the easy guide and write everything down it tells you to write down because Verizon uses a GUID generated by the radio rom when it is used for the first time on your phone. Not all areas as of today not every area does this but most and soon all will. It depends upon where you are in their upgrade chains.
3. If you install Radio 3.27, you're a screwed verizon customer because resets (hard and soft) and power ons (?????) will no longer aquire a signal right away. You will be waiting for 15 minutes or longer before you can use your phone again and no one has a working solution to this for Verizon customers. This happens to EVERY verizon customer.
4. People have upgraded to the original leaked rom without a problem (and without that delay) and that allowed them to have working phones possibly because of one or all of the following:
a. It is signed by Verizon and you don't have to unlock your phone?
b. MAYBE it doesn't require the radio upgrade????
c. Because it was built using only Verizon stuff it is missing whatever incompatible tool the other kitchens have in them????
d. Because it has WM 6.0 and 6.1 hasn't been tested with Verizon????
5. DCD's rom has all of the MS Office software as an installable option whereas No2Chem's excludes it. Don't know if this includes outlook or not.
6. Both of the Kitchens mentioned above will work with Verizon and they have options that allow you to choose Verizon as an install option branding your phone correctly.
So that is upgrading your verizon phone as I understand it. Am I off too far on anything? I've not seen reports of any bricks yet but I know that is always possible.
So who has tried what ROM and to what degree of success?
Click to expand...
Click to collapse
1. There are people who say they did not need to call verizon, but i did.
2. this is mostly true, some areas still use an akey but verizon will gladly give that to you, just tell them you did a hard reset.
3. the roms that work with GPS require the 3.27 radio... I had no delay with using the phone after any flash (i've done several) there is a delay for GPS to work the first time
4.a. original leaked rom was from sprint
4.b. the radio upgrade to 3.27 is required or GPS will not work and neither will any rom that is based on this radio
4.c. again original leaked rom is from sprint and contains no verizon stuff, dcd broke down the leaked rom and made available to everyone else
4.d. the titan or xv6800 shipped with 6.0 (6.1 to release soon for verizon, although i have it now)
5. the outlook portion of office is standard on all pocket pc phone
6. True...you must choose your carrier or you won't be able to connect to your towers properly
that being said, I use a rom built with dcd's kitchen and am very pleased, if you want one with lots of stuff you may want to try nexvisions rom
Hope this helps
rmancl said:
that being said, I use a rom built with dcd's kitchen and am very pleased, if you want one with lots of stuff you may want to try nexvisions rom
Hope this helps
Click to expand...
Click to collapse
Thanks rmacl! That helps a lot. Reading through a few hundred pages of facts for different versions mixed in with cries for help and resolved issues can make the process, for someone who thought a kitchen was a room till a very short time ago, pretty daunting no matter how tech savy they are they are.
I appreciate your help in solidifying the details.
I will then be upgrading my phone tomorrow. I plan on following the easy update post listed above exactly as it is written.
I saw one post of a person who had done the same thing EXCEPT that they took a break and installed SPL 2.40-olipro. They had the 15 minute pause in aquiring the signal. So, I am wondering if that is a contributing factor. I'm thinking that the "Sprint unofficial 3.16 Release" includes an upgraded boot the spl/bootloader.
If this is a bad plan, or if it is not how you did it successfully and you are willing to share the steps you followed, please let me know.
Thanks again for your help.
EDIT: nexvisions rom pretty closely matches my current config. And what I don't have from that rom I like. The rest of the stuff I have installed should be enabled when I run a sprite backup restore. Thanks for the suggestion
Just did this today-
I'm using NexVision's Hybrid ROM(version based on dcd's latest 2.3.1).
I did the following:
1. Update SPL app
2. Loaded above ROM
3. Loaded latest radio
4. *228 'ed to get programming
5. did IOTA for some reason
6. No outgoing calls. Could not authenticate. Had to call VZW and they got me going in a few minutes. (the MSL for my phone i got from GetSPC.exe didn't work)
So, bottom line- My 6800 is working just fine with NexVisions Hybrid right now.
Anything else you'd like to know?
I was up and running on a DCD 2.3.2 cooked ROM and 3.27 radio with issues acquiring signal. Some have implied that running the "Easy Guide" instructions on PPCGeeks would resolve the delay in acquiring signal issues.
I couldn't get the leaked 3.16 ROM loaded using the 1.06 Bootloader, so I loaded the 2.40 Bootloader and then successfully loaded the leaked 3.16.
This put my phone on Sprint. According to the guide, running DCDs ROM that I cooked using the kitchen would reset the phone to Verizon (by selecting Verizon as my carrier.) This didn't work. Right now my phone is running the DCD ROM, 3.27 radio, and I can't get into the PST to edit the MSID and MDN.
Guess I'm going stock and upgrading again.
Am I the only one or is the fact that this phone is carried by at least 2.5(sorry alltell) major carriers a problem. We get people, admittedly I almost was one, that flash their phones with roms for the wrong carrier and then wonder what's going on. One would hope that you could pick up a cdma phone and use it on a CDMA network but that's just not true. There are tons of documented and undocumented crap holes that deviate from the spec because of the ad-hoc hobbled together system that is the United States cellular system. I would suggest splitting sprint and verizon but that would further fragment an already super fragmented market.
I am not sure the state of your phone or how to go about fixing it but the easy guide does seem to be for sprint users and not for Verizon. There is yet to be an uprgrade sanctioned for us - I hear it's coming, but I heard that with the Samsung i730 - and it took 9 months to get from 'soon' to released.
VX6800 DCD2.3.1 Working great
Ok I am an engineer on the network and perhaps Murphy got me to be over prepared and so I had the least problems. Started stock, flashed 2.40 unlocker, flashed DCD 2.3.1, flashed radio 3.27, booted back up and worked perfectly. I did write down everything, and I do mean everything that could be gotten in the PST ( by the way, the MSL on Verizon units is 000000 and no GetMSL is required) so I did not need that. I called VZW data support and told them that I was about to do a hard reset and had heard that sometimes the A key got messed up, so he gave it to me up front just in case, and because I had it ready is why I suppose I did not need it either. My signal came up perfectly, my PRL and provisioning data did need a *228 option 1 to get it back in, my GPS came right up fast and accurate, could make and receive calls right away, MMS worked perfectly right away. The only problem that I have with the new ROM is that the 'box type' mini-usb to 3.5 mm adapter with the mini-usb pass thru does not work properly anymore, but my stock one and my pigtail adapters do work, so it is somthing in the adapter design. Also SelectRadio 4.02 drops out as if the data connection goes down and back up, but it does not. I look at the PPP data and it is perfect, and when I just put my channels in Resco Pocket Radio all is well.
Well, I'm a long experienced IT guy with a background of working in cellular....so I'm not exactly ignorant on the subject.
madman, I did the exact steps you did, with the exception of writing down every setting in the PST (just the MSID and MDN). Yet my phone takes 15-20 minutes to acquire signal. Was there anything you had to adjust besides the MSID and the MDN?
To complete my story from my last post, I was able to recover back to a VZW stock ROM and try again. Second time around I didn't let the Sprint cutomizations run. That fixed the problem of my phone being "Sprintized". However, it didn't help with my issues acquiring signal (which was the entire reason I went through this exercise.) BLAH.
Having 1 set of instruction for Sprint and Verizon is fine, but what we need is are people from each side working together on the documentation. Right now everything seems to be completed by Sprint users.
Geckotek said:
...
To complete my story from my last post, I was able to recover back to a VZW stock ROM and try again. Second time around I didn't let the Sprint cutomizations run. That fixed the problem of my phone being "Sprintized". However, it didn't help with my issues acquiring signal (which was the entire reason I went through this exercise.) BLAH.
Having 1 set of instruction for Sprint and Verizon is fine, but what we need is are people from each side working together on the documentation. Right now everything seems to be completed by Sprint users.
Click to expand...
Click to collapse
I'm willing to bet it's the fact that you used a sprint rom. Even though it said you weren't sprintized I bet there are still sprint ghosts in your phone. These things aren't well documented nor are they straight forward. I am sure that there is something in the sprint rom that is causing your problem (it's the only thing that is different from stories of people who have been successful)
ICLKennyG said:
I'm willing to bet it's the fact that you used a sprint rom. Even though it said you weren't sprintized I bet there are still sprint ghosts in your phone. These things aren't well documented nor are they straight forward. I am sure that there is something in the sprint rom that is causing your problem (it's the only thing that is different from stories of people who have been successful)
Click to expand...
Click to collapse
Well, what you are saying is basically what I've suspected all along. I think the 3.27 radio is basically a rip from a Sprint ROM...right?
This is why I am trying to get a VZW tech to review ALL of the PST settings with me. She was gonna call back, but stupid me, I think I reset my phone and missed her call. Grrrrrr
Geckotek said:
Well, what you are saying is basically what I've suspected all along. I think the 3.27 radio is basically a rip from a Sprint ROM...right?
This is why I am trying to get a VZW tech to review ALL of the PST settings with me. She was gonna call back, but stupid me, I think I reset my phone and missed her call. Grrrrrr
Click to expand...
Click to collapse
What I am saying is the Sprint Rom is for Sprint. The radio is a radio from what I can tell. It doesn't seem to be setup to be one company or another with the correct rom. However what you are doing is taking a rom that is built by another carrier for their network and trying to use it on your network. Use a verizon intended rom (Hint: not sprint) and the 3.27 radio and you should be fine.
One would hope that you could just strip the sprint part out of their roms and run it on the VZW network but we all know these devices are more hodgepodge then strict implementation of standards.
ICLKennyG said:
What I am saying is the Sprint Rom is for Sprint. The radio is a radio from what I can tell. It doesn't seem to be setup to be one company or another with the correct rom. However what you are doing is taking a rom that is built by another carrier for their network and trying to use it on your network. Use a verizon intended rom (Hint: not sprint) and the 3.27 radio and you should be fine.
One would hope that you could just strip the sprint part out of their roms and run it on the VZW network but we all know these devices are more hodgepodge then strict implementation of standards.
Click to expand...
Click to collapse
There is no Verizon intended ROM that I'm aware of that supports the 3.27 radio.
spreeway said:
J
6. No outgoing calls. Could not authenticate. Had to call VZW and they got me going in a few minutes. (the MSL for my phone i got from GetSPC.exe didn't work)
Click to expand...
Click to collapse
getspc.exe is for sprint only
the msl code for verizon is "000000" minus the "'s
I've added a bunch of info to the first post. I haven't had time to do the flash till now. After I pack tomorrow, I should be able to do it. Plus I wanted to have all my ducks in a row for this process. I'm now fairly confident I know most of the failure points in the process and how to recover from them... we'll see.
Geckotek said:
There is no Verizon intended ROM that I'm aware of that supports the 3.27 radio.
Click to expand...
Click to collapse
Ummmmm NexVision IS a verizon user and his ROM is most certainly built for verizon above others, sprint and alltel second. DCD also has an option in his kitchen for verizon. as for No2Chem... I havnt used his rom so I couldnt tell you for sure. But I assure you as I am alive and breathing, there are ROMs intended for the Big Red V, I know I use one and Love it. I messed up when I first flashed, but never had to call VZW about it, just reflashed to stock then tried again.
As stated, I used both DCD and NexVision and both activated, called and surfed on the network. If you have any specific questions, I will gladly field them, Specialy since I have insurance on the phone... If it hoses, i will break and replace it.
Launching my first rom flashing...
blksprk said:
Ummmmm NexVision IS a verizon user and his ROM is most certainly built for verizon above others, sprint and alltel second. DCD also has an option in his kitchen for verizon. as for No2Chem... I havnt used his rom so I couldnt tell you for sure. But I assure you as I am alive and breathing, there are ROMs intended for the Big Red V, I know I use one and Love it. I messed up when I first flashed, but never had to call VZW about it, just reflashed to stock then tried again.
As stated, I used both DCD and NexVision and both activated, called and surfed on the network. If you have any specific questions, I will gladly field them, Specialy since I have insurance on the phone... If it hoses, i will break and replace it.
Click to expand...
Click to collapse
Ummmmmm, you completely missed the point.
So is there any word when Verizon will release an update similar to what we are able to do with the new ROMs and Radio?
I mean if it's going to be a month away, I may just, if it's going to be 3 months or forever then I guess I'll have to try it.
It seems either it works perfect, or it doesn't, and some people don't need to enter in an akey? Interesting...
I went from a stock XV6800 (Verizon) to the 2.40 unlocker, the 3.27 radio and a ROM built off of DCD's 2.3.2 kitchen. I did not need to record *any* of the phone's programming info. After flashing, *228 successfully set up the phone and I was able to start making/receiving calls.
"3. If you install Radio 3.27, you're a screwed verizon customer because resets (hard and soft) and power ons (?????) will no longer aquire a signal right away. You will be waiting for 15 minutes or longer before you can use your phone again and no one has a working solution to this for Verizon customers. This happens to EVERY verizon customer."
This seems not to be true, because I'm a Verizon customer and it didn't happen for me. I get both a cell and data signal right away on either reset (soft, anyway; haven't had to try hard yet) or power-on.
I'm a happy camper so far, with the only glitch being one unexplained soft reset one morning while the phone was waking up to execute an alarm. The phone reset instead and the alarm sounded when it came back up. Hasn't happened again since.
rmancl said:
getspc.exe is for sprint only...
Click to expand...
Click to collapse
No, I can verify that it works for Telus as well.
I cannot get my new phone to get a signal after the following:
1. 2.4 unlocker (Hard-spl-mfg.exe)
2. Sprint Rom (RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship.exe)
3. DCD Rom (DCD_3.0.1_Verizon.exe)
I believe I followed all of the instructions and upgraded my XV6800 from stock to DCD 3.01. When I finally get booted up I can never get a signal acquired. I can dial *22802 and let it connect and then I get a signal, but even then I get an error about the #777 internet access, so something is wrong. I new A-Keys and made sure all of my info was written down and correct.
Is there a way to start over from stock? Can I relock and put the stock Verizon on and try again?
Help!
did you.....
When you ran in the Sprint ROM did you let the customization run ? If so then there is the problem, as it overwrites verizon parms with the sprint. That can be fixed by getting the VZW PRL and running it in with the EPST, then set your home SID/NID also in EPST, then you should have VZW signal and not roaming, then a *228 should reprovision the rest. If you did not write down your info before you flashed then you missed a step.
I was under the assumption that the Sprint customizations don't run until I tap the welcome screen which I did not. I immediately installed DCD 3.01. I'm returning it to stock to see if I can get a signal then starting over.
Where can I get the VZW PRL? I will search now.
ok then they did not run
well I guess they did not run but maybe your PRL and provisioning data got wiped, MSID, MID, SID/NID, you know that stuff. There are stock VZW ROM images out there but my methode would fix it safer and easier as I am sure that the signal issue is a missing or wrong PRL. Go into EPST (##778) and select 'view' and then look at PRL which should show 50989 or somthing close as that is the current VZW PRL, a different number would be someone elses overwritten on yours, blank is no PRL which is also badd. then look at SID/NID where the first set should be populated. If you fix just these 2 things then you should get back on VZW signal and be able to provision it. Going with a full restore is like crushing and reconstituting your car when it only needs a wash and the ash trays emptied. If you do still want to though, the stock images do exist here.
I relocked and put the Verizon stock back on and went through the setup procedures and the phone works great back at stock.
I started the update over.
Installed the Unlocker.
Installed Sprint ROM. No customizations allowed.
Installed DCD 3.01
Signal does not acquire but will after 15 minutes or so and all is fine. As soon as I soft-reset.. no signal. The PRL is the 50989 the latest. All of my MSID and other numbers match.
Maybe it's the DCD 3.01. I don't know where to find 3.0.0.
I'll keep searching. Thanks madman34 for your help!!!!
I've noticed that after waiting for the signal 15 minutes, everything works wonderfully. I've tried changing the MIP MODE over and over but that hasn't worked.
Anyone with DCD 3.01 and the new Sprint ROM Radio able to get a signal without waiting 15 minutes?
HELP!
Yep, I get signal within 3 seconds.... Not sure what the issue is with your phone....? I am currently a Verizon user....
I am a Verizon user with DCD's 3.0.1 and upon soft reset get a signal within 2-3 seconds.
Hi guys, just to let you know I'm in the same boat at the OP with a Verizon phone and No2Chem's 5055. I'll start a new thread with a more descriptive title and see if we can get some additional help.
KeithGP said:
I relocked and put the Verizon stock back on and went through the setup procedures and the phone works great back at stock.
I started the update over.
Installed the Unlocker.
Installed Sprint ROM. No customizations allowed.
Installed DCD 3.01
Signal does not acquire but will after 15 minutes or so and all is fine. As soon as I soft-reset.. no signal. The PRL is the 50989 the latest. All of my MSID and other numbers match.
Maybe it's the DCD 3.01. I don't know where to find 3.0.0.
I'll keep searching. Thanks madman34 for your help!!!!
Click to expand...
Click to collapse
Did you try the *22802 and hanging up? Geckotek mentioned that as a fix to the problem.
I also found that the customizations tried to run after installing DCD 3.0.1, did you let those run?
Osteo said:
Hi guys, just to let you know I'm in the same boat at the OP with a Verizon phone and No2Chem's 5055. I'll start a new thread with a more descriptive title and see if we can get some additional help.
Click to expand...
Click to collapse
What city do you have service in?
I did try the *28802 and it didn't fix it for the N2C rom. Man, I'm getting depressed over this.... I'm in middle Tennessee (Cookeville), great cell coverage for both Sprint and Verizon.
Osteo said:
I did try the *28802 and it didn't fix it for the N2C rom. Man, I'm getting depressed over this.... I'm in middle Tennessee (Cookeville), great cell coverage for both Sprint and Verizon.
Click to expand...
Click to collapse
is your PRL 50989?
http://www.corolada.com/prl/
lllboredlll said:
is your PRL 50989?
http://www.corolada.com/prl/
Click to expand...
Click to collapse
I've gone back to stock so that's what it says now. During my 1st call to tech support they had me go over many of the EPST settings and I think that's what it said but I was so perturbed I don't recall. I'll try again (was thinking of trying DCD's most recent as he has carrier specific ROM's) and if I loose the radio, I'll check again. Thanks for the input....
Is the fundamental issue here that your installing a SPRINT rom on a VERIZON VX6800?
Why not try installing a VERIZON rom?
spreeway said:
Why not try installing a VERIZON rom?
Click to expand...
Click to collapse
If I wait for VZ to release a WM6.1 ROM with GPS I could be old and gray... I'll try DCD's most recent with VZ ROM and Sprint Radio tomorrow...
spreeway said:
Is the fundamental issue here that your installing a SPRINT rom on a VERIZON VX6800?
Why not try installing a VERIZON rom?
Click to expand...
Click to collapse
Spreeway, there is no such creature that enables RevA and GPS. These are enable by using the new sprint ROM (to upgrade the radio) and then a custom rom (DCD!) for verizon.
Quick update. Resolved. It was a prl issue, rolled back to an older prl and all is well. I guess I'll have to wait for an official rom from VZW to get the latest prl but all is working now.... How odd.
I am using 50989 with 3.0.1. Now that you're back to an older prl, dial *228 NOT *22802 and then press 2 at the prompt. Update the prl OTA and see if it works this time.
Tried and failed... Yesterday, once I figured out about the older PRL, I upgraded and called for a new A key. Tech support updated the A key on their side and he had me run *228 option one and when it rebooted I had no signal. I checked the PRL and it was 51020! They must have just released a new one... Rolled back with the tech on the line, didn't need a new A key and all is well since.
I still can't figure out why any of the Nationwide PRL's drop my signal but as my plan has coast to coast no roaming, I think if I get outside of my home zone it should still pick up towers (I hope but I dont travel much).
Also, I can't figure out why I can't change the roaming options in the phone options. It currently has no check infront of 'Sprint only' or 'roam only' and if I check either I loose the cell radio. Very odd!
Talked to a VZ tech today who told me that if i was to activate to VZW and get a phone I could do an ESN change (he would force the ESN on the VZW network) with my Alltel PPC6800....
One catch he said I had to flash the phone with the VZW firmware before he could do it so he could be held liable for extra charge if the phone wasnt VZW compatiable, also he can not supply me with the flash kit.
Anyone have any ideas on this ?
chanderson said:
Talked to a VZ tech today who told me that if i was to activate to VZW and get a phone I could do an ESN change (he would force the ESN on the VZW network) with my Alltel PPC6800....
One catch he said I had to flash the phone with the VZW firmware before he could do it so he could be held liable for extra charge if the phone wasnt VZW compatiable, also he can not supply me with the flash kit.
Anyone have any ideas on this ?
Click to expand...
Click to collapse
Flash it, and then call him back. It not hard & works great.
flash the mr1 update. here's the wiki for flashing, recommend you read over that. you should however flash VZ's rom and have them program your phone before flashing any sort of custom rom.
DO NOT FLASH THE VZW MR1 ROM!
THis will lock down you GPS to be used only by VZ Navigator. Assuming that you care to have unlocked GPS.
Do you care about GPS?
Also need to know the ROM you have right now.
Go to System->Settings->About (?) and report what it says.
Flash To MR1 and use the Valhalla fix to unlock GPS. Or do like others said go to MR1 and then to a custom rom. Last choice is go to the Stock 6800 with no 6.1 and then go to a customer DCD rom after they authorize the phone. You have many choices.
Well since GPS wasnt really a factor to me i decided to go ahead and run the RUU_TITAN_VZW_WWE_3.57.605.1_RS_TITAN_3.37.75_OM_VZW_ShipFULL file from the HTC website and i got to 11% and got an error 294 Invalid Vendor ID
Do I need to unlock this phone first? makes sense but i didnt try first.
Also
Windows Mobile 6 Pro CE OS 5.2.1629 Build 18136.0.4.8
and
TITA100
SPL-2.07.0000
CPLD-9
instead of me getting frustrated and then drunk may i ask someone to layout the instructions they would follow to flash this alltel phone to the MR1 VZ flash...
All the reading is making my head hurt and i understand less and less the more i read
edit:: Ok 6 beers later i got the nerve up to use the Hard-SPL-MFG.exe and the RUU from the verizon site so far so good going monday to see about getting it turned on then i get to restore tomtom off of my sd card and follow the GPS fix and see if that works.
Thanks for the advice
Just an update
Just wanted to update everyone that VZ swapped my Alltel PPC over with no questions. They told us (me and the tech) to dial *228 and choose opt. 3 and the system activated no problem....maybe this is verizon getting ready for the Open Equipment Policy???? I dunno but it sure made my life a little easier...just got the dreaded PPP 11 Error now no help for that
edit:: So the tech that swapped my equipment an hour ago called me back from the store ( I work at Radioshack and VZ is four doors down so we are friends) to come and get my phone that the PPP 11 Error will be fixed tomorrow when a higher teir is at work that for SOME REASON ed(hehehe) the VZW system didnt recognize the ESN as a PPC and the Data Session was Hung somewhere. Everything else is working calling in and out and reg sms txt is sending just no Data till tomorrow
!!!!!!QUESTION for anyone who reads this....I just got to thinking this is something that should be on the Wiki for people with data problems mainly with all the Number porting,,,on the PPP usernames should it be
your MDN or MSID @vzw3g.com ???? because for some of us that is two different numbers
so what is the update on this because I can get the alltel version for like 50 while the vzw is twice as much not to mention the alltel version looks better.
It is a whole lot of work to try to get the phone on. And there are no guarantees
so even though Verizon is a parent company of Alltel I just can't flash it with Verizon rom and then get it activated on VZW?
I have a PPC6800 flashed with one of Ryan's Alltel 6.5 ROMS (Great job Ryan!). The phone worked great in my home area after the flash, but I'm currently on vacation and cannot get a EVDO signal in Orlando! I get decent signal for voice in most places, but really just enought to make calls, lots of "can you hear me now" in the conversations. Verizons maps show that they cover this area completely so I went by the Verizon store to see if they could update the phone. The tech guy said that the phone was still really an Alltel phone and there was nothing that he could do. (he was kinda a jerk, didn't appear to even want to help) I use the data connection alot and have become very dependent on it to stay in touch with my office, but with my current 1x connection, email is about all it's good for.
My questions are:
Can I apply the Verizon version of the ROM to the phone without bricking it?
If not, is there something I can do myself to "update" to tap into Verizon's EVDO network?
Thanks for any help.
you can start by updating your prl *228 option 1 or 2 (dont remember)
GeLopez said:
you can start by updating your prl *228 option 1 or 2 (dont remember)
Click to expand...
Click to collapse
Yeah, I tried that, but since I'm already out of my home area, it doesn't work. All I get is "programming unsuccessful" or something like that.
Alltel's pda support is pretty good. Call in & get one of them on the line. They will try & make you do the *228 thing. Also check your setting for Home Only/Roam and see if that makes a difference at all.
dlundy said:
I have a PPC6800 flashed with one of Ryan's Alltel 6.5 ROMS (Great job Ryan!). The phone worked great in my home area after the flash, but I'm currently on vacation and cannot get a EVDO signal in Orlando! I get decent signal for voice in most places, but really just enought to make calls, lots of "can you hear me now" in the conversations. Verizons maps show that they cover this area completely so I went by the Verizon store to see if they could update the phone. The tech guy said that the phone was still really an Alltel phone and there was nothing that he could do. (he was kinda a jerk, didn't appear to even want to help) I use the data connection alot and have become very dependent on it to stay in touch with my office, but with my current 1x connection, email is about all it's good for.
My questions are:
Can I apply the Verizon version of the ROM to the phone without bricking it?
If not, is there something I can do myself to "update" to tap into Verizon's EVDO network?
Thanks for any help.
Click to expand...
Click to collapse
Lol WOW.. If your Carrier is Verizon why the heck would you flash my Alltel ROM?? WTF do you think its an Alltel ROM for?? Its not a stock ROM it is a Custom ROM meant to flash on any TITAN(mogul, ppc6800).. It is fully programmed (besides PST/QPST a user has to program that memory region of the phone themselves) for the Carrier..
What you should have done was take your "Alltel Branded" PPC6800 and flashed the olipro2.40 unlocked bootloader, then flash a Custom Verizon ROM, then flash a gps radio 3.35 and up, then hard reset and pull battery for a couple minutes. Make sure the phone is UNPLUGGED and boot it up. Now access PST and Program it for VERIZON, load your local Verizon PRL, and update the items so phone resets. When it boots back up you want to access DMR (diagnostic mode) and plug it into the computer and Program QPST for VERIZON, make sure everything is set for Verizon you have to do some searching.. Also make sure to do the GPS one tab last and write to phone while still in that TAB, do not leave the GPS one tab until after its completed. Now unplug the phone and open task manager and close DMR, now soft reset the phone. Keep it UNPLUGGED and when it boots up access the internet to set it up for the first time.
RyanMogul6800 said:
Lol WOW.. If your Carrier is Verizon why the heck would you flash my Alltel ROM?? WTF do you think its an Alltel ROM for?? Its not a stock ROM it is a Custom ROM meant to flash on any TITAN(mogul, ppc6800).. It is fully programmed (besides PST/QPST a user has to program that memory region of the phone themselves) for the Carrier..
What you should have done was take your "Alltel Branded" PPC6800 and flashed the olipro2.40 unlocked bootloader, then flash a Custom Verizon ROM, then flash a gps radio 3.35 and up, then hard reset and pull battery for a couple minutes. Make sure the phone is UNPLUGGED and boot it up. Now access PST and Program it for VERIZON, load your local Verizon PRL, and update the items so phone resets. When it boots back up you want to access DMR (diagnostic mode) and plug it into the computer and Program QPST for VERIZON, make sure everything is set for Verizon you have to do some searching.. Also make sure to do the GPS one tab last and write to phone while still in that TAB, do not leave the GPS one tab until after its completed. Now unplug the phone and open task manager and close DMR, now soft reset the phone. Keep it UNPLUGGED and when it boots up access the internet to set it up for the first time.
Click to expand...
Click to collapse
Ryan, I normally agree with you 100%, but I don't think that's the case here. I'm pretty sure he's an Alltel customer that is confused because of Verizon's recent purchase of Alltel.
Basically, Verizon is not going to be fully taking Alltel phones onto their network...ever. They are still Alltel phones. BUT there are new PRLs out there which will allow you to completely utilize the entire Verizon (and Sprint, too) tower structure.
So what he should do is still with the Alltel ROM. And because Alltel gives the 6800 their 3xxxx series PRLs and not the higher quality 4xxxx series, he needs to donwload the best PRL and update it manually.
Here's a link to a page where you can download the latest PRL 40050. There are instructions on the page to show you how o install. The one change I've had to do is instead of simply ##775, I had to do ##775#.
http://www.the-answerman.com/sidlist/prl/index.asp
Good luck!
btonetbone said:
Ryan, I normally agree with you 100%, but I don't think that's the case here. I'm pretty sure he's an Alltel customer that is confused because of Verizon's recent purchase of Alltel.
Basically, Verizon is not going to be fully taking Alltel phones onto their network...ever. They are still Alltel phones. BUT there are new PRLs out there which will allow you to completely utilize the entire Verizon (and Sprint, too) tower structure.
So what he should do is still with the Alltel ROM. And because Alltel gives the 6800 their 3xxxx series PRLs and not the higher quality 4xxxx series, he needs to donwload the best PRL and update it manually.
Here's a link to a page where you can download the latest PRL 40050. There are instructions on the page to show you how o install. The one change I've had to do is instead of simply ##775, I had to do ##775#.
http://www.the-answerman.com/sidlist/prl/index.asp
Good luck!
Click to expand...
Click to collapse
Thanks for trying to clear things up but its still a little inconclusive. You said he is an Alltel Customer, you also said that Verizon bought Alltel.. Now remember he says he has a "Alltel Branded" TITAN.
If Verizon bought Alltel that means the Carrier Alltel still exists, it wasnt a merger correct?
Ok then, if he has a Alltel TITAN, and he is an Alltel Customer, with my Alltel ROM. Why even mention that VERIZON will not take Alltel phones onto their network??? You said he is an Alltel customer, and he has a Genuine Alltel TITAN, so he would be activating the Genuine Alltel TITAN on Alltel..
I was confused because of all this talk about Verizon maps, verizon store, etc.... I see what you mean about his PRL, so hopefully he updates to the 4xxxx series and his issues vanish. But wow what confusing posts..
Hopefully the Verizon, Alltel purchase doesnt affect my Alltel or Verizon ROMs from working properly. I wouldnt be suprised though..
I think the downloaded PRL should do the trick. I used to work for Alltels data support and they cannot help unless you are on network. If you are roaming on another carriers tower then nothing can be done to manually push a new prl through to the phone. I know from experience that Orlando/Kissimmee area is a tricky area. The issue is that Alltels PRLs are very crappy. There are towers in the area which will not incur you roaming charges, but for whatever reason, the phones will not choose to connect to. I forget the SID of the towers in the area which will get you 3-4 bars of EVDO coverage. What I have done before while I am there is to keep checking your phone to see if it picks up on those towers (it will from time to time). Go and check the current SID number and then set that as your home SID and put the phone in home only mode, which will lock you into those group of towers while you are in that area. Of course, if you leave the area you will want to set your phone back to your normal home SID and take the phone out of home only mode. Hopefully the PRL update via that download link above will help you, but if it doesn't then try this method. I will warn you that if you get the wrong tech on the phone and they try and help you update your phone, then they could make matters worst for you.
so, like i said on post #2 update your prl!!! by any means.
RyanMogul6800 said:
...I was confused because of all this talk about Verizon maps, verizon store, etc.... I see what you mean about his PRL, so hopefully he updates to the 4xxxx series and his issues vanish. But wow what confusing posts..
Hopefully the Verizon, Alltel purchase doesnt affect my Alltel or Verizon ROMs from working properly. I wouldnt be suprised though..
Click to expand...
Click to collapse
LOL, if my post was confusing it's because I'm pretty confused. I went to the Verizon store for several reasons.
I am out of my home area and the nearest Alltel Store is 75 miles away (Tampa,FL).
My Home Store is now a Verizon Store.
I recieved a letter telling me that I was now on the Verizon Network.
When I dial a wrong number I get a Verizon recording.
I heard that Verizon bought Alltel
When I got to the Verizon store, they told me
I was still an Alltel customer
Verizon doesn't carry a phone llike mine (PPC6800)
My phone was a pocket pc phone not a smart phone (yes that's what he said)
There was nothing he could do.
Call Alltel tech Support (he was kind enough to give me their number).
The Alltel guy, though courteous and seemingly genuine in his efforts to help, could not. He even mentioned that he had been in Orlando recently and had the same problem. His only recommendation was to take the battery out overnight so everything would clear and maybe when it reconnected it would update the PRLs.
My apologies for not being more clear.
On a positive note, I took btonetbone's advice and updated the PRL,(this is what I'd hoped the Verizon tech could do) and I am currently getting EVDO connection, at least the status indicator says so. I'm not getting a very good signal where I'm at so the speed is not great. 267 DOWN, 314 UP (oddly enough) on a Speakeasy speed test. I'll see how it works tomorrow when I can get a better signal and know more then.
Thanks to all who have responded, I understand things a little better now.
RyanMogul6800 said:
Lol WOW.. If your Carrier is Verizon why the heck would you flash my Alltel ROM?? WTF do you think its an Alltel ROM for?? Its not a stock ROM it is a Custom ROM meant to flash on any TITAN(mogul, ppc6800).. It is fully programmed (besides PST/QPST a user has to program that memory region of the phone themselves) for the Carrier..
What you should have done was take your "Alltel Branded" PPC6800 and flashed the olipro2.40 unlocked bootloader, then flash a Custom Verizon ROM...
Click to expand...
Click to collapse
Had the Alltel ROM not worked so well in my home area that's exactly what I would have done. Well.... It's exactly what I would have done after coming here and finding out how to do it.
Thanks for your hard work...
No problem I am glad you got it sorted out, those speeds are better than nothing at all so you are getting somewhere. Also I breezed by your compliments on my work but thanks for the compliments.
Members in general are great here, very knowledgeable and persistent. This is literally the best forum around.. Too bad they dont go the "thanks button" route though that would be magnificent.