Dear Senior members,
I am new user of Gene 100( New) verified from both method SPLcheck ,Olipro and Orefkow Method and found that It's new gene n udated it's SPL..
Then i update my WM6 Rom to Sumit's Pro User ROM ( WM 6.1 for both Old and New Gene).
It worked fine.
The by mistake I click the file gene_hspl.exe ( The file using for Updating SPL for Old gene).
immediatly My phone got off.
i tried a lot to switch on it .
then I push cam key with soft reset key, then my phone on in boot loader mode with SPL 1.10.olip
and
ONBL 1.17.0000
Now i am Not able to update to my SPL again.
and Phone is not working, What should i do now..?
Should i Update SPL again or anything else.
I tried to update Newer ROM ,But message come with Error(300) Please get newer Update Utility for ur phone.
Kindly Solve out my Problem
ur device is still under warranty period??
Try to unbrick again from orefkov method if it works GREAT! otherwise take ur device to service center and dont tell him about cracking and just tell him that it automatically switched off...
dont try anything without suggestions of other GENE forum members..just ask them too what to do..?
If you are getting to Bootloader with olip spl. orefkov method should work. BTW, How did your Gene work with both Old and New Gene ROMs???
AND WHY DO YOU NEED TO POST THE SAME QUERY WITHIN FOUR MINITUES?
IF YOU ARE IN SUCH A HURRY, BEST PLACE IS THE SERVICE CENTRE.
Addicted2xda said:
If you are getting to Bootloader with olip spl. orefkov method should work. BTW, How did your Gene work with both Old and New Gene ROMs???
AND WHY DO YOU NEED TO POST THE SAME QUERY WITHIN FOUR MINITUES?
IF YOU ARE IN SUCH A HURRY, BEST PLACE IS THE SERVICE CENTRE.
Click to expand...
Click to collapse
cool down addicted...he is just embarrassed....
vikas _khatri1981 said:
Dear Senior members,
I am new user of Gene 100( New) verified from both method SPLcheck ,Olipro and Orefkow Method and found that It's new gene n udated it's SPL..
Then i update my WM6 Rom to Sumit's Pro User ROM ( WM 6.1 for both Old and New Gene).
It worked fine.
The by mistake I click the file gene_hspl.exe ( The file using for Updating SPL for Old gene).
immediatly My phone got off.
i tried a lot to switch on it .
then I push cam key with soft reset key, then my phone on in boot loader mode with SPL 1.10.olip
and
ONBL 1.17.0000
Now i am Not able to update to my SPL again.
and Phone is not working, What should i do now..?
Should i Update SPL again or anything else.
I tried to update Newer ROM ,But message come with Error(300) Please get newer Update Utility for ur phone.
Kindly Solve out my Problem
Click to expand...
Click to collapse
jsut update ur spl by using spl for new gene.
this will do
Related
I have HT7 Phone it bricks during upgrading the SPL because it had WM5 and I went to install WM6
I can boot the Phone in Recovery Mode ( Holding the Camera Button and Boot ). Three Color Screen and I can communicate with the phone through the MTTY but during installing the Update it says ERROR 300
is there anyway to get the phone alive again ?
Thanks for your Help
** I have Kaiser and it's not mine , it was belong to my friend and I damaged his phone
PS : Phone is out of warranty and there is no service center here , also I can't use the JTAG Method
jafer mainly error 300 comes in when you are using wrong rom update utility... atleast in my case...after running spl pgm from phone and mtty program make sure you run the rom update utility inside the spl folder before running the rom update utility inside the rom folder... hope this helps.. and make sure that the rom is for old gene...
which spl its nowing at the tricolor screen now... oref or olipro?
which spl its showing at the tricolor screen now... oref or olipro?
ONBL 1.10.0000
SPL 1.07.oref
Thank you
Could you please explain more , where to get those files
I got Unbricker from here
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Thank you again
Question : when TriColor Launched can I re-flash the original firmware ? i don't know what to do now
Please look at the stickey, krazy has made quite a good tutorial about flashing etc and has all the tools hyperlinked. LoL
Hi Thanks but please don't refer me to reads topics , because i've already read all of them
The Phone is HT7 , during the upgrade it bricks , I used the " Orefkov " but it seems it only works for new Phones
Anyway by no I can Boot the Phone in Tri Color Mode but when i try to upgrade a rom it says ERORR 300
is there any way to BOOT the Phone through the SD Card ? I already had the same issue with another phone , I boot the phone with SDCard and it became alive again !!
But I don't know the Instructions for this GENO Crappy Phone
try removing the SD card and update the ROM. BTW as far as i know oref Is for new Gene. post a query on the right thread and ankit or krazy or any proficient member will definitely help you out. or you may pm basha for help.
Problem with SPL
--------------------------------------------------------------------------------
Dear Senior members,
I am new user of Gene 100( New) verified from both method SPLcheck ,Olipro and Orefkow Method and found that It's new gene n udated it's SPL..
Then i update my WM6 Rom to Sumit's Pro User ROM ( WM 6.1 for both Old and New Gene).
It worked fine.
The by mistake I click the file gene_hspl.exe ( The file using for Updating SPL for Old gene).
immediatly My phone got off.
i tried a lot to switch on it .
then I push cam key with soft reset key, then my phone on in boot loader mode with SPL 1.10.olip
and
ONBL 1.17.0000
Now i am Not able to update to my SPL again.
and Phone is not working, What should i do now..?
Should i Update SPL again or anything else.
I tried to update Newer ROM ,But message come with Error(300) Please get newer Update Utility for ur phone.
Kindly Solve out my Problem
__________________
Need of You
plz dont waste threads...
Hey Guys I have a HTC Gene p3400i previously i spoke to guys like sumit and Krazy also, first i had a motherboard series of HT8X, i somehow unlocked the CID using Orefkov method, but everything was fine oneday i flashed it with a Wrong Stock ROM and thats where the problm started, it got bricked i took it to service center the technicians were very helpful they changed the motherboard to a new one of HT8X series, i tried to unlock the CID/Change the SPL to either Olipro or Orefkov both didnt work when i tried with Olipro jumpspl method it says the Update Utility is invalid, when i tried with Orefkov mtty it says cant unlock the CID or basicaly it says cant place the SPL and finally i tried the Olipro HSPL method it goes to boot loader shows Olipro 1.10 in SPL but when i flash a Old gene ROM the RUU utility says or wants a new RUU i tried it around 5 times continously starting from monday to Friday and totally it got bricked for 5 times also, i took it again and again to service center the guys didnt hesitate they were really helpfull they unbricked it, i even asked would i get my previous motherboard they said its already been sent to HTC for Fault Repair.
Now the methods which i can't use:
1) Olipro HSPL (which again bricks)
2) the Orefkov mtty (which says cant place the spl)
3) the Olipro Jumpspl method which shows a Blank white screen but when try to update using RUU says requires new RUU
PLEASE HELP.....!! THIS HAS BECOME A CHALLENGE FOR ME>>>>>>>> I READ ABOUT THE SAME PROBLM IN THE FORUM BY NEW BEES ALSO PLZ HELP......!!
Now i m using the stock rom which came with gene,i added a lot applications i somehow managed to get touch control for scrolling and all everything ok.....but i miss the WM 6.5 style MENU, TASKBAR, FREE RAM and most of all the TITANIUM it was my favourite i was using Duron's WM 6.5 for new gene it was very cool...
Now i feel like crying i am addicted to WM 6.5 PLZ HELP...
Hey Guys I have a HTC Gene p3400i previously i spoke to guys like sumit and Krazy also, first i had a motherboard series of HT8X, i somehow unlocked the CID using Orefkov method, but everything was fine oneday i flashed it with a Wrong Stock ROM and thats where the problm started.
it got bricked i took it to service center the technicians were very helpful they changed the motherboard to a new one of HT8X series, i tried to unlock the CID/Change the SPL to either Olipro or Orefkov both didn't work when i tried with "Olipro jumpspl" method it says the Update Utility is invalid, when i tried with "Orefkov mtty" it says can't unlock the CID or basicaly it says cant place the SPL and finally i tried the "Olipro HSPL" method it goes to boot loader shows Olipro 1.10 in SPL but when i flash a Old gene ROM the RUU utility says or wants a new RUU.
I tried it around 5 times continously starting from monday to Friday and totally it got bricked for 5 times also, i took it again and again to service center the guys didnt hesitate they were really helpfull they unbricked it, i even asked would i get my previous motherboard they said its already been sent to HTC for Fault Repair.
Now the methods which i can't use:
1) Olipro HSPL (which again bricks)
2) the Orefkov mtty (which says cant place the spl)
3) the Olipro Jumpspl method which shows a Blank white screen but when try to update using RUU says requires new RUU
PLEASE HELP.....!! THIS HAS BECOME A CHALLENGE FOR ME>>>>>>>> I READ ABOUT THE SAME PROBLM IN THE FORUM BY NEWBIES ALSO PLZ HELP......!!
can you please let me know is it new gene or old gene?
ankuhadia said:
can you please let me know is it new gene or old gene?
Click to expand...
Click to collapse
yes previously before changing the motherboard it was HT8X series but was new gene now its same series but it is old gene....
Hey Guys I have a HTC Gene p3400i previously i spoke to guys like sumit and Krazy also, first i had a motherboard series of HT8X, i somehow unlocked the CID using Orefkov method, but everything was fine oneday i flashed it with a Wrong Stock ROM and thats where the problm started, it got bricked i took it to service center the technicians were very helpful they changed the motherboard to a new one of HT8X series, i tried to unlock the CID/Change the SPL to either Olipro or Orefkov both didnt work when i tried with Olipro jumpspl method it says the Update Utility is invalid, when i tried with Orefkov mtty it says cant unlock the CID or basicaly it says cant place the SPL and finally i tried the Olipro HSPL method it goes to boot loader shows Olipro 1.10 in SPL but when i flash a Old gene ROM the RUU utility says or wants a new RUU i tried it around 5 times continously starting from monday to Friday and totally it got bricked for 5 times also, i took it again and again to service center the guys didnt hesitate they were really helpfull they unbricked it, i even asked would i get my previous motherboard they said its already been sent to HTC for Fault Repair.
Now the methods which i can't use:
1) Olipro HSPL (which again bricks)
2) the Orefkov mtty (which says cant place the spl)
3) the Olipro Jumpspl method which shows a Blank white screen but when try to update using RUU says requires new RUU
PLEASE HELP.....!! THIS HAS BECOME A CHALLENGE FOR ME>>>>>>>> I READ ABOUT THE SAME PROBLM IN THE FORUM BY NEW BEES ALSO PLZ HELP......!!
Now i m using the stock rom which came with gene,i added a lot applications i somehow managed to get touch control for scrolling and all everything ok.....but i miss the WM 6.5 style MENU, TASKBAR, FREE RAM and most of all the TITANIUM it was my favourite i was using Duron's WM 6.5 for new gene it was very cool...
Now i feel like crying i am addicted to WM 6.5 PLZ HELP...