Related
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
Sir,
can any one tell me how to restore my htc p3400i back to normal. i have a device HTC P3400i GENE100. i use a guide on this site of KRAZY_ABOUT i successfully install orefkov and after install that i upgrade my original ROM WM6.0 to cooked wm6.1 (by lemlon). after install the cook rom i get my device too slow so then i reinstall RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe i was really dont know it was for old gene. after install it my HTC is restart and not booting up and not going into bootloader mode and i tried evey combination of key (camera+power button or vol+cam+power or press both "-" button and insert batt.)to go in bootloader mode.... PLZ Help me i m suffer with this problem.
http://forum.xda-developers.com/showthread.php?t=506467
now only gene jtag method can help u !
search for gene_jtag_restore_revised and u will find
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
amolji said:
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
Click to expand...
Click to collapse
install a new ROM thats it
PRoblem solved
Even my device is bricked because of this ROM
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
amit_nikharge27 said:
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
Click to expand...
Click to collapse
hi amit,
i am also finding the solution for this. but now i m sure i have only last way to restore this with JTAG method, so i m collecting information about this JTAG method, if i able to restore my GENE with this i will definitely create a full guide for new bee who are struggling with this problem...
so keep u r eye on thread.....
bye....///
Hey hi, guru,
did u managed to restore your device using JTAG method.
could you please share me the steps if you have resolved it.
any one need information on j-tag.....?coz i recovered my lost gene b4 6 months ago using this j-tag.....so simple.....
Why do people go around flashing ROM's blindly?? :angry:
It is clearly mentioned everywhere i read not to flash original ROM's without removing the radio parts..
Please don't flash a rom who contains IPL, SPL or GSM. It will brick your device. Sometimes in a irreparable way.
People should pay more attention to everything mentioned here..
Hi rony_z367,
b4 8 months i lost my mobile due to upgrading spl,but it was in warranty...
now my gene is working fine with cooked roms but still i want to know about J-Tag.
sry abt my english
It is the process of recovering the memory addresses of ur ARM where u can directly connected to the respected hardware & re-program that h/w with ur given addresses.....but its so risky.....finaly ur addresse comes to 00....
Actually i didn't understand it completely..
but thx for info..
the pleasure is all mine.....thnx......
i have abig problem with my atome ,1st, bootloader it's dead already after i upgrade only OS ( not Exten, eboot,or radio) via SD card.but i can fix it by press
(camera+power on)in the same time with inserting battery,after it show MINI bootloader,then i try upgrade againe, but this only EXTENED rom.So it dead againe.and now i try as (camera+power on),(camera+reset) or anyway for fix,but it still dead.
so any body help.............
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
hi try this way
ShUvR0 said:
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
Click to expand...
Click to collapse
1st you must know that your divice dead or not?
try to understand this http://forum.xda-developers.com/wiki/index.php?title=Semi-Brick_symptom_ATOM_BRICK
2nd if you are sure that your divice dead try this
http://forum.xda-developers.com/wik...m_Exec,_Rover_G5,_Orsio_n725,_HP68xx_DeadBoot
Finally,the methode is very difficult to understand but you must know becuase its only one way to fix.Your divice is atome Ex so you have 2 way to do.Also you shoud be see my replyed too http://forum.xda-developers.com/showthread.php?t=336278&page=20
wish everything success but if not mail to me againe ill take some picture that i worked with my divice.
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
hi
ShUvR0 said:
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
Click to expand...
Click to collapse
Entering Bootloader Mode on Semi-Brick Atom
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader screen)
tried this yet?
Hello HD2 users!
My problem is: Im got new HD2, tryed to update it to android, im was do all steps, but now it wont boot at all!
Im can only boot it into HLSP colored screen, nothing then... Im tried to install new software, ORIGINAL from t-mobile, but it's always stuck at 0%...Tried many difrent things like: New Radio, Reinstall HSPL, Install Magldr, Soft reset,Hard Reset! Im always stuck at 0%!! Evet tast29 wont start at all!
When it stuck at 0% im turn my phone, but it wont boot again until im get my batery out for 5-10min...
Really, mi in love with this phone, im can't get phone in service, because im dont have warranty...
Everybody,help me... Real fix ( one man ho helps me to get my phone works) will get 15$ at paypal!
Thanks All!
Im will be active!
You may should put your Phone into the Bootloader, then reflash the HSPL, put it again in Bootloadermode and then try to flash an Custom Rom for your Phone.
Edit: You wrote T-Mobile Original Rom so do you may have the american Version of the HD2 and flashed the wrong thing ?
I hope I could help you.
Greetings by Myself5
Sent from my Galaxy S2.
....
Yes im have t-mobile HD2...im flashed HLSP3, now is completly dead.... im think my bateri is out, how to charge it?
Do you know someone who has an HD2 and would allow you to charge it ? If not put it on the charger and set it in bootloader. Normaly it should load then.
Sent from my GT-I9100 using xda premium
Galaxy3HELL said:
Hello HD2 users!
My problem is: Im got new HD2, tryed to update it to android, im was do all steps, but now it wont boot at all!
Im can only boot it into HLSP colored screen, nothing then... Im tried to install new software, ORIGINAL from t-mobile, but it's always stuck at 0%...Tried many difrent things like: New Radio, Reinstall HSPL, Install Magldr, Soft reset,Hard Reset! Im always stuck at 0%!! Evet tast29 wont start at all!
When it stuck at 0% im turn my phone, but it wont boot again until im get my batery out for 5-10min...
Really, mi in love with this phone, im can't get phone in service, because im dont have warranty...
Everybody,help me... Real fix ( one man ho helps me to get my phone works) will get 15$ at paypal!
Thanks All!
Im will be active!
Click to expand...
Click to collapse
I am having a similar problem. Whenever I try to update the ROM, the utility gets stuck at 0%. I've somehow managed to get to replace the 2.08 SPL to 3.03 and flash the stock ROM but even if I'm lucky enough for it to work, it still won't boot past the HTC logo.
Hey guys,
My phone was running fine and i just turned it off once. it didnt turn on, doesnt blink leds, or anything. it gets detected in my computer but it doesnt go to software mode and the lg tool doesnt detect it. any help suggestion is appreciated, i bought a new htc after that but still this was a given to me as a gift and i want to bring it back to life. any help is appreciated. i'll try them all
thanks!!
edit: now its getting detected and ejects itself every 4 seconds :/
model!!
what model is your l9?? need more information to help you, maybe I can upload a recovery from the stock rom but let me know your model, greetings!!