i tested the unlock htc niki 100 vodaphone spain in operation phone stoped in 95% .
I TESTED THE POWER PHONE ENTRE IN BOOT MODE
NIKI100
SPL1.16
CPLD4
I TESTED TO REPETE OPERATION NOT WORK STOPED IN 0%
I TESTED TO FLASH PHONE SAMME PROBLEMS
PLZ SOLUTION FOR SOLVED THE PROBLEMS
Read this:
http://forum.xda-developers.com/showthread.php?t=390606
Good-luck
Related
hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
i have a 9100 where i had installed wm6 ( all ok ) .After two days the phone didn´t go, it blocked to first step where there are the ipl spl gsm and os. then i thought to reflash it ( camera + power on ) but my pc restarted and the upgrade procedure were 25% , now the phone doesn´t go, the battery is perfect , i proved it by tester .
ps: sorry for my english
kkclaudio said:
i have a 9100 where i had installed wm6 ( all ok ) .After two days the phone didn´t go, it blocked to first step where there are the ipl spl gsm and os. then i thought to reflash it ( camera + power on ) but my pc restarted and the upgrade procedure were 25% , now the phone doesn´t go, the battery is perfect , i proved it by tester .
ps: sorry for my english
Click to expand...
Click to collapse
Which version is your phone,G3 or G4,how did you upgraded to wm6 ? Did you CID unlocked your phone, Is it stuck at Bootloaders (multicolor screen) ?
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
kanwalgee said:
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Click to expand...
Click to collapse
Plenty of people have done this before !
There is a sticky thread in this forum above your post
http://forum.xda-developers.com/showthread.php?t=405814
Whoops Sorry Jay, I didn't realise that kanwalgee had double posted
same answer anyway.
HTC P3400 is struck at start up screen.
It shows only >>
ONBL 1.07.000
SPL 1.0.7.00
OS 1.7.000
S/N starts with HT808FW and procured from India
It does not show the radio version..
Tried hard reset but does not go to reset mode..
Then tried flashing with RUU_Gene_hTC_Asia_India_1.17.720 shipped ROM but after 2% gets Invalid Vendor..
Even tried the gene unbricker by Orefkov (Matty Method), but no success..
Phone goes to bootloader mode by pressing Camara + Power On..
Need help >> Supporter come to rescue...
can u describe how/why the current situation occurred
Phone was getting restarted and then arrived at this condition...
has not been tapmered with any software...
it will be better to go to a service center instead
it seems to be hardware issue
Hello i need to flash my phone as it is in german swisscon but i managed to unlock it now its just german i used USLP and it shows blue-red-green screen wich shows niki100 USLP-4 but what ever software ROM i try to flash in it synces with PC shows the bootloader and then both PC and phone shows Loading bar 0-100% then it just resets and shows me recovery option on PC so no rom cant be flashed, thanks for reading if you know what may couse this please tell me
PS: its ELF Touch Dual niki 100 with 3G camers on front, i want to reflash it to English - its unlocked and can be used with any SIM