Related
Does it really help to have a screen protector on STR? My nook is always inside a case, and always have some finger smudges on the screen, which does not interfere with reading the screen content.
Would it make the screen harder to use, such as in a resistive screen? I know it has IR technology, not resistive lcd, but it is good to know...
I have a screen protector, because I have cats and dogs who're lurking around my nook, and I'd hate to see them scratch the screen. I'm not using any case for it. The film does not affect the touch sensitivity in any way...
thanks for the info, emarusceac.
I can see dogs and cats and stuff being a problem. I just have an old NC sleeve laying around that works. If you can stand the wait, ebay is cheap Turns out the NC and NST width is the same...
emarusceac,
what sort of screen protector are you using?
Hi mh127,
I'm using a basic anti-glare screen film from ebay.
The nst is the first touch screen I have not used one on.
It is perfect now, the matte should hide small scratches, it gets used more lightly than phones/tablets, it is light (less damage if dropped), and it is cheap!
I am going to buy one.
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
emarusceac said:
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
Click to expand...
Click to collapse
I ordered one. Was concerned that it would be tough to apply because of the high frame around the screen. Any tips how to apply well? You use a credit card to smooth the film down over the screen?
Oh one more thing. Has anyone tried removing one? Does it change or damage the screen in any way?
I have had several different screen protectors on my NST and none of them caused any damage when I removed them. I would note though that I have read that you must not apply a screen protector to the Glowlight, something about the built in screen protector and its light guide properties. I would also point out the one reason my NST has had multiple screen protectors is because they are so hard to apply without getting bubbles/lint between the screen and the film. The film I have on now I finally got applied without any bubbles/lint in the reading area, so it will hopefully be on there for a while. Make sure you are working in a CLEAN area and take great pains to get it lined up straight before actually applying it to the screen.
The NST doesn't need a screen protector, it really wont do much for the device, but if you really feel like spending the money for it go ahead.
The NSTG already has a protector built in, putting an extra one on would be like putting on an extra pair of latex gloves. It'll offer a little more protection, but it can get to be quite frustrating in terms of lost control. It's advised not to bother with a protector for the NSTG.
Personally unless you know you're going to have your NST in reach of creatures with claws, or lose objects with sharp edges the protective screen will do little for you. Even in those cases it's possible the screen would merely lessen the damage done rather than prevent it out right.
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Xadious said:
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Click to expand...
Click to collapse
They claim there is one, I claim they lie as there is no visible edge of one. If there was you wouldn't get the light flares from minor scratches. Adding one may protect the screen but no idea what it would do to the light guide properties of the screen. If you ever have to remove it I'd worry what would happen to the light guide layer.
Because gadgets capabilities/sppecs increase rapidly & prices drop fast too, unless it's expensive I forget about screen protectors if the device is cheapish (got mine cheap) & if it will be outdated in a couple of years. Specially if it's not an outdoor device like my phone. Or if the protector hampers speed / functionality to some degree. Also personally I rarely scratch tab screens unless it's a phone, my phones/tabs all have protectors put on from day one, but not doing my NTSG. YMMV.
Just put a plastic tub on top of my phone by accident, was nothing in it so there was no weight in it. Then I looked at my phone and now there are really fine scratches, you cant feel them with your finger nails and has to be good lighting but they are there. I've seen people try to scratch this glass with keys and knifes, yet laying a plastic box on it has caused minor scratches.
I have to believe there is some sort of coating on the glass, probably oleophobic, that is showing these scratches. The only thing that can scratch glass is something harder than glass on the Mohs scale. And plastic certainly isn't one of them. That being said, it still sucks and makes the phone look bad. I wonder if the coating can be removed...
Apparently you can re-coat it but probably a specialist job and doubt you'll find many company's doing it for at least a few years.
To me it is just ridiculous to go through all that research and development to create a scratch proof glass then coat it with a substance that is easily scratched. It kind of defeats the purposes doesn't it?
You can buff scratches out.
how and what with ?
I'm getting more and more concerned about this "new and improved" GG2. I have had incredibles with no case and throw it around left and right with no screen cracks and barely scuffs.
I wouldn't try buffing them out if I were you. I read that one xda member tried this on his phone and stuffed it up completely.
Ok I've decided the Samsung galaxy S3 glass is useless. My dad works in a double glazing factory which is dusty and full things that could scratch his HTC sensation screen, yet his phone is scratch free. Mine I never put it anywhere other then my pocket except for the one miss hap. Yet my phone has acquired more screen scratches. It's so irritation, they are not deep they are only noticeable in full sunlight when the screen is clear from finger prints.
A sells guy at a samsung showroom was bragging about how strong the screen is by hitting it with his keys... I took the phone, angled it towards the light and I could clearly see deep scratches.
Glass being scratched only by harder elements is only a myth. Even dust can scratch it, just have a closer look at your car's windshield, it's probably full of scratches yet you never rub it with a diamond.
You must have sand or other fine particles in your pocket. Keys and such shouldn't be your biggest worry, most glass resists scratches from these. Sand and other fine particles is where you are screwed.
The Xperia S comes with a pre-applied shatter resistant screen protector.
Now the thing is I got a scratch on mine. Which kinda sucks. How easy is it to remove it and then replace it with a new exact same one?
I bought a pair of screen protectors. But they don't fit all around the screen like the shatter-resistant protector.
They cut out around the sensors, camera and speaker.
So. Any tips and tricks?
Screenshot of the bought screenprotectors:
http://db.tt/O2iOYjki
Well put another one like that, its almost impossible, already its a thread in here for that, how to remove it and the options for a new one
kekkle said:
The Xperia S comes with a pre-applied shatter resistant screen protector.
Now the thing is I got a scratch on mine. Which kinda sucks. How easy is it to remove it and then replace it with a new exact same one?
I bought a pair of screen protectors. But they don't fit all around the screen like the shatter-resistant protector.
They cut out around the sensors, camera and speaker.
So. Any tips and tricks?
Screenshot of the bought screenprotectors:
http://db.tt/O2iOYjki
Click to expand...
Click to collapse
That's because you're supposed to cover the anti-shatter sheet (which is not a screen protector just anti-shatter) with a screen protector that you can easily replace.
I just posted a thread in this same forum section about official Sony ones I got from Japan. But remember they are not the same as your anti-shatter sheet, you're supposed to put them on top of the anti-shatter sheet.
In terms of what they cover, they are the closest to the anti-shatter sheet as they cover all the sensors, the Sony ones just don't cover the camera and the earpiece.
If you order the Sony potector, you have two choices. You can either put it on top of the anti-shatter sheetand hope you wont be able to see the scratch anymore through this one or you can remove the anti-shatter sheet and place this one down alone. Its up to you.
I've already removed the sheet. It's now completely free of protection as I screwed up putting on the screen protector.
It's more sensitive dust and fingermarks now, but overall I'm happy. Will be placing a screen protector on it soon again when I get around to it.
Took mine off today. I seriously, repeat, seriously doubt that sheet can do ANYTHING. It peels off like regular screen protector, does not glue to the glass at all. Once you have a corner up it lasts less than a second to peel it off.
For some of you repeating what SONY want you to believe, carry on.
Sent from my LT26i using xda premium
richteralan said:
Took mine off today. I seriously, repeat, seriously doubt that sheet can do ANYTHING. It peels off like regular screen protector, does not glue to the glass at all. Once you have a corner up it lasts less than a second to peel it off.
For some of you repeating what SONY want you to believe, carry on.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
That's what I say. The screen is much better without it.
Should i remove the screen protector
I have Scractched My Sony Xperia S , and it kinds of irritates when there is more White ,, I heard and read that the factory applied screen Protector can be removed, the Question is , is it a screen Protector or a shatter Protector..
In the case i do remove it how do i clean the glass if there is any residue gum and will it affect the screen in any way... Should i Put on a New screen Protector Once i Remove the original Factory fitted one.
mrsatan said:
That's what I say. The screen is much better without it.
Click to expand...
Click to collapse
does Xperia U have the same screen shatter protector? mine is scratched in the second day, now I applied a screen protector over it
Sent from my ST25i using xda premium
Yes it is a shatter protector thick layer, I damaged mine too (Xperia P), I removed it and then applied a good quality screen protector, no residue no marks are left when the shatter protection is removed, hope this helps.
Sent from my LT22i using xda app-developers app
I had no idea the provided protectors had to go on top of the already applied one. Is it written in the manual/instructions?
Anyway, what is a good screen protector that can replace the shatter one to a good enough standard? I have scratches on mine, a rather large scuff over the front camera, making it unusable. So I suppose I could remove it and replace it with a protector?
Any recommendations?
It doesn't prevent shatter, i know that for a fact!
Sent from my LT26i using Tapatalk 2
Thats probably why it's not called a shatter preventor protector
Sent from my ST25i using xda app-developers app
How easily can the screen without the preapplied protector be scratched? Just from carrying in a jeans pocket?
Should I apply a screenprotector if I remove the original one?
Gesendet von meinem LT26i
The screen of the Xperia S is pretty scratch proof. Like really proof. The shatter-resistant protector on the other hand gets scratched in no time.
kekkle said:
The screen of the Xperia S is pretty scratch proof. Like really proof. The shatter-resistant protector on the other hand gets scratched in no time.
Click to expand...
Click to collapse
This.
Sent from my LT26i using xda premium
Yeah if I put my face up to the screen during direct sunlight I can just make out tiny scratches. Some of them are not permanent and some clearly are. The screen has been very good vs heavy scratches, but still gets light scratches like every other phone screen I have had. If you were to put a screen protector on you wouldnt even notice the scratches. Light scratches will always happen and it doesnt really bother me unless I can see them.
Edit: I did receive a free Spigen screen protector so I will try it out and see if I like it or not just for the hell of it. Generally though I prefer the naked screen and even my old hero with gorilla glass 1 came through just fine except for the minute almost imperceptible scraches.
Folks, Gorilla Glass is a marketing ploy. It doesn't offer any real scratch resistance over normal glass, but the compound it's made of makes it less likely to shatter (two different things). When it comes to scratch resistance, you're looking at the Mohs scale.
Mohs scale of mineral hardness - Wikipedia, the free encyclopedia
You may be more familiar with this than you think. Diamond is a 10, the hardest substance known to man. Diamond can only be scratched by another diamond or a laser.
Glass has a rating of 6-7, depending on the hardness of the glass. Plastic is a 3-4.
If you take your keys over a glass screen (or a glass window), touch it to the surface, and rub with a little pressure (just enough to gain a degree of resistance), you WILL NOT scratch the glass. I've even scared the crap out of someone by hacking at my Zune HD's screen with a carbon-steel steak knife, and not a scratch.
So what will cause you to scratch your glass screen? Two things;
-a softer material (like metal) and force, not resistance. Yes, if you slam something into the screen, it may very well get a small crack, small enough that we see it as a scratch. Because, while glass is very scratch resistant, it easily shatters. It's force that gives us those small "scratches."
-dirt/sand - Sand (quartz sand, specifically) is an active ingredient in glass. If you get small particles of sand or other types of dirt on the screen and then wipe it off with your shirt (or even a microfiber cloth), you can develop small scratches in your screen. The most annoying is those who wipe with a circular motion, as it leaves rings in the screen. Want to avoid this? Take a SMALL amount of Endust for Electronics and a paper towel and gently wipe off the screen. The liquid will act as a buffer between the screen and the dirt. Then, take a microfiber cloth (those little eyeglass cleaning cloths that come with screen protectors) and wipe off the residue left by the Endust and any pieces of the paper towel.
When you use a quality screen protector (SGP, Clarivu, Martin Fields), you're putting a plastic overlay over the phone. While this will scratch more easily than the glass screen, if applied correctly, it acts as a shock absorber, thus making it harder for the screen to shatter. It protects from scratches by taking the scratches itself, and it protects from shattering by absorbing the force of the blow.
The wet applications like the Invisible Shield are so thin that they don't noticeably increase shatter resistance. They'll just keep the screen together when shattered. The Invisible Shield is harder to scratch though, making it so that you don't have to replace it as often (it looks nicer longer than a normal plastic screen protector). Basically, it protects from scratches by deflecting them, but doesn't offer any real shock absorption.
Gorilla glass claims a hardness of 9 on Mohs scale which is utter bs. It realistically has a hardness of about 7-7.5 max. Normal glass can range from 6-7.2 depending on the type. Diamond is 10 and Sapphire is 9 which is what the make high end watch faces out of but is damn expensive. If Gorilla Glass was a 9 then they would use it for the watch faces since it is much much cheaper. I have a Citizen watch that has sapphire and the face is scratched as **** because I have had it for 12 years.
Remember as long as the scratches are the insanely small type caused by sand grains and such, you can easily get some special polish and buff those right out. The one nice thing about our screens not having oleophobic coating is you dont have to worry about damaging the coating when you polish it.
The best way for a manufacturer to reduce scratches is to put a chin on the phone like the Hero had. This way the phone screen never touches the ground.
When I got the phone I thought that the phone had one screen protector installed and that the other one in the packge was spare. How wrong I was. Now the shatter-resistant protector is full of small scrathes, even tough I haven't had keys or anything else on the same pocket. I've had the phone for about three months now.
I ordered Martin Shields few days ago, and I'm going to replave the shatter-resistant protector with that.
I had Wrapsol on my Galaxy Note and was pretty satisfied with it, but unfortunately they don't make one for P. My wife has Zagg on her Galaxy S, but it's bit too stick for my taste.
I put a screen protector on today to test it with one and it was on for all of 30 seconds before I tore it off. I just cant stand the things. Perfect thing for me would be a fold over case but as I use my left hand for the phone, they all fold the wrong way.
The phone was completely unusable for me after removing the shatter protection. The glass itself is a sticky mess, even after wiping of the goo left from the shatter protection, fingerprints and dust stick like crazy and is a real chore to clean.
I bought a Steinhall crystal clear film and the phone is now smooooooth as butter. I absolutely love it.
revan17 said:
The phone was completely unusable for me after removing the shatter protection. The glass itself is a sticky mess, even after wiping of the goo left from the shatter protection, fingerprints and dust stick like crazy and is a real chore to clean.
I bought a Steinhall crystal clear film and the phone is now smooooooth as butter. I absolutely love it.
Click to expand...
Click to collapse
It gets better after a while. Mine is nice and smooth. I got a free spigen clear with my case but it didn't feel as good as bare glass.
Sent from hell using Xperia-S(atan)
---------- Post added at 12:59 AM ---------- Previous post was at 12:58 AM ----------
I can't stand the edge it adds by the bar on the bottom.
Sent from hell using Xperia-S(atan)
The trouble is that while the bottom and sides provides a nice grip, the top glass bevel edge protrudes over the side edge of the Spigen case.
Thus, unlike some other cases of my other phones, placing the phone face down (or even a mild drop from 1 inch height) causes the glass to touch hard surface.
Apart from full Otterbox, is there a rubber or silicone skin that would also provide a small lip OVER the glass face, not a complete 2nd screen protector or skin completely over the front glass ?
I have the Spigen Rugged Armor case. On the top and bottom of the phone, there is a lip so that if you lay the phone face down, it's being supported by those two lips. This is much like any case you'd find on a Galaxy S7 Edge.
I have the Spigen Neo Hybrid and the Liquid Crystal and both have a lip at the top and bottom that keeps the screen off the surface when you lay it screen down.
I have a Spigen Hybrid. Sides of the case allow me to use the phone's edges, but it has a lip at the top and bottom, that even with a glass protector on gives me enough clearance to place the phone on the table face down. And I do this all the time, as when you place the phone face down on a surface, the proximity sensor shuts down the screen until you lift the phone back up again.
I've always loved Spigen cases. But all of their V30 cases have reduced profiles on the front sides, I'm assuming due to the curved glass. Since the V30 doesn't have active edges (like the S8), I fail to see the benefit other than aesthetic. And of course there is less edge to help protect the screen in a fall. A lot of the V30 cases are designed this way, but not all of them. I'm using the Tech21 Evo Check, which has a raised lip all around the screen.
Spigen Rugged Armor case has lips to prevent screen from touching surfaces when placed face down. It is a really good case. Only drawback for me, which might be for cases in general for the V30, is the fact that any dust from your pocket will sit inside the lip at the bottom of the case.
This might just be mine but I've also found that there is a tiny slit at the bottom of the phone where dust and dirt can get into, its visible as well, makes the phone luck yucky at the bottom.
I'm at work now but will try and post a picture of what I mean later on.
Just in case anyone is thinking to remove the inner screen protector on their Find N2 (fold) - don't.
I am crying for days now after removing it, and I hope I can at least save the heart ache to other people.
The screen didn't break or anything, but two things happened:
1) Unlike the front screen, the glass surface under the inner screen is not very smooth. My fingers glide easily on the front screen with its protector removed, but there is some resistance on the naked inner screen; not as "oily". This is the smaller problem.
2) The crease is now VERY visible. What I didn't realize is that the original screen protector is a little matte, and it makes a great job deflecting lights reflections on both sides of the crease. With it removed, the surface is more glossy, and some light always finds its way to the crease, making it visible. If I look at the screen tilted away from me, I don't see it as much. But that's not a natural way of holding the screen.
Please think twice before removing it.
If there is someone who already removed it, and found a good aftermarket protector to apply, please share your experience.
I feel bad for you bud.. I haven't thought about removing mine but appreciate the heads up bro!