Has anyone found a good working sport armband for the TP2?
its bad enough we get compared to that other phone, lets not go around looking like it.....................lol
get_ur_tilt_on said:
its bad enough we get compared to that other phone, lets not go around looking like it.....................lol
Click to expand...
Click to collapse
What? What does an armband have to do this looking like an iPhone. There are valid reason to want an armband. Running or going to the gym are time when an armband might be useful.
RojasTKD said:
What? What does an armband have to do this looking like an iPhone. There are valid reason to want an armband. Running or going to the gym are time when an armband might be useful.
Click to expand...
Click to collapse
I was going to make this exact comment, but I didn't know how useful it'd be to helping the OP(and me) find an armband for my phone.
renze69 said:
Has anyone found a good working sport armband for the TP2?
Click to expand...
Click to collapse
I use this one. Not bad, just got to wear your phone upside down since there is no hole at the bottom of this case:
http://www.onlytilt2.com/saomblarcaca.html
Good luck!
Crowdawg54 said:
I use this one. Not bad, just got to wear your phone upside down since there is no hole at the bottom of this case:
http://www.onlytilt2.com/saomblarcaca.html
Good luck!
Click to expand...
Click to collapse
Time to bring this thread back from the dead!
I have been looking for an armband for a while. Is that one good? It doesn't have a way to close at the top, couldn't the phone fall out?
I found that same case on eBay for $11 shipped.
http://cgi.ebay.com/BLACK-ARMBAND-P...wItemQQptZPDA_Accessories?hash=item2558426b9e
This phone is thicker then the iPhone by 4mm but could it fit in an iPhone case? I might swing by the store tomorrow and try sticking it in one.
Yes, the Tilt is tight in the sleeve. But I haven't had any issues with it falling out during my workouts, etc. I think the sleeve actually is an iPhone case, but I might be wrong. Sorry I couldn't be more help!
im looking for one that has another slot/compartment for cash. nothing too big, just a little slot.
I have been on the hunt for a armband that I can use that I don't have to take the bodyglove case off that I use. I have tried a few of the stores around my area and they are all made for iPhone and with the case on they are all just to small.
That armband on eBay looks great. Just worried about water getting in if it started to rain while running. Suppose I going at least hold it upside down if needed till I got home.
I think it makes sense putting it in upside down so you can glance down with it on your arm and read the screen if needed.
Now...any recommendations for some decent application that displays speed, distance run and tracks my route for uploading to Google Earth? Saves buying a Garmin 405!
aerotec said:
That armband on eBay looks great. Just worried about water getting in if it started to rain while running. Suppose I going at least hold it upside down if needed till I got home.
I think it makes sense putting it in upside down so you can glance down with it on your arm and read the screen if needed.
Now...any recommendations for some decent application that displays speed, distance run and tracks my route for uploading to Google Earth? Saves buying a Garmin 405!
Click to expand...
Click to collapse
Try Endomondo - it uploads automatically to its own site and you can extract the track info from there. Mine's been off a little bit with my TP2's GPS chip, but I don't know if that's the chip itself, the software, or the fact that I run with my phone in the pocket of my shorts.
Related
Hi
Does anyone know if there is someone that makes a bike (handelbars) holder for the Blackstone?
edit
I did find some on with google search, but does anyone have any experience??
yesterday, i have ordered this:
http://www.dantotec.de/shop/Richter...HD-T8282-Blackstone-100-inkl-Halteschale.html
now i have to wait for delivery
Please post your experience when you have tried it.
bike holder
Hi, I am interessted in a solid Bike holder too and was looking for the whole day. I found this in ebay germany, the producer is Haicom, tomorrow I will order.
I want to use it only in landscape mode and for me it looks appropriate for this. The only thing is that I don't trust the connection between the HTC cradle and the Handlebar attachment, so perhaps I have to stick it with instant glue, but all the other holders I saw don't have such big retaining clips in the cradle like this one.
also interested
Guys
I'm very interested in this too, looking forward to hearing experiences from you. I need to retire my Ortleib pouch!
my experience so far
The cradle i ordered is a little bit bigger then the touch hd and the connection between handlebar attachment and the cradle is a little bit unsteady like i thought but no problem. I sticked felt pads on it and its very very solid now, also a good method to avoid scratches. I've made a little video that you can see how solid this is now. So I think this is a good one only after you stick those felt pads.
Sweet it looks pretty sturdy.. If you can get it to stay in one place on the handel bars then thats the one for me
handle bars
I've mounted the cradle on my bicycle, it doesn't move from its place.
There is a rubber layer at the attachment.
Today i have received my bike holder (http://www.dantotec.de/shop/Richter...HD-T8282-Blackstone-100-inkl-Halteschale.html)
it looks realy safe (not testet in action)
i have "shaked" the holder with my touch hd over my bed and it dont pull out (i hope you know what i mean ^^)
and the size is very good, not too small and not too big "like a second skin"
in the package you get also 3 rubber for more security...
i think i can recommend this bike holder
i wait for this (cause its not in stock): http://www.dantotec.de/product_sear...417fff&query=HRI01686&x=30&y=17&channel=001_0
this product is recommended from the manufactorer, it should guarantee more stability...
I have combined this:
http://www.amazon.de/Motorradhalterung-für-Lenkstange-inkl-Schwanenhals/dp/B000RGVNK8/ref=pd_cp_ce_2
(I do not have the space for the HD directly over my handle so I needed some distance...)
with that:
http://www.amazon.de/HR-Klemmbacken...=sr_1_3?ie=UTF8&s=ce-de&qid=1274939042&sr=1-3
(Had this one already for my car.)
I did not buy them from amazon (I forgot where I got them), but they are original from HR.
Just an advice: The first time I used my device on the bike, I lost my stylus - it must have gotten loose due to some vibrations, and it was only on a paved bike path, not cross country-like vibrations...
So better remove your stylus or find some way to fix it.
I had the luck that it was on my way to work, and it waited for me to pick it up on my way back not far from my home...
The Whistler
Ebay is perfect for this stuff.
la3bna said:
Hi
Does anyone know if there is someone that makes a bike (handelbars) holder for the Blackstone?
edit
I did find some on with google search, but does anyone have any experience??
Click to expand...
Click to collapse
hello la3bmna
i have this one http://www.otterbox.com/pda-cases/1900-series/1900-series-pda-case/ is a cracking unit
jez
A cradle for a bike with exposed screen like that is asking for trouble. If you go over a bad road or bump etc it can become lose or if you are in a crash there is no protection. I found its safer to get one of them arm band phone protectors and strap it down. seems to work for me
A|ex said:
A cradle for a bike with exposed screen like that is asking for trouble. If you go over a bad road or bump etc it can become lose or if you are in a crash there is no protection. I found its safer to get one of them arm band phone protectors and strap it down. seems to work for me
Click to expand...
Click to collapse
learn how to ride a bike and dont crash and it cant come loose
jayjay101 said:
The cradle i ordered is a little bit bigger then the touch hd and the connection between handlebar attachment and the cradle is a little bit unsteady like i thought but no problem. I sticked felt pads on it and its very very solid now, also a good method to avoid scratches. I've made a little video that you can see how solid this is now. So I think this is a good one only after you stick those felt pads.
Click to expand...
Click to collapse
Wich clip did you order with your haicom Bike Holder? I cannt find a T8282 version?
I have ordered that bike holder for the HTC Touch HD (T8282), just take a look once again. It is definitly from Haicom for the Touch HD
... I found the designation for the clip its "HI-027"
jayjay101 said:
I have ordered that bike holder for the HTC Touch HD (T8282), just take a look once again. It is definitly from Haicom for the Touch HD
... I found the designation for the clip its "HI-027"
Click to expand...
Click to collapse
I can only find the carholder for the T8282, not the bikeholder.
Seems to me that no one sells this bike holder in Netherlands. Here is an ebay seller in Germany, you can order there if you don't mind.
http://cgi.ebay.de/Fahrradhalter-Ha...482571585&po=&ps=63&clkid=7404611744228772107
jayjay101 said:
Seems to me that no one sells this bike holder in Netherlands. Here is an ebay seller in Germany, you can order there if you don't mind.
Click to expand...
Click to collapse
jorisdekloris said:
I can only find the carholder for the T8282, not the bikeholder.
Click to expand...
Click to collapse
I bought a bikeholder at Saturn. They have several bikeholders from Hama and not expensive. Mine is even waterproof.
eddyve said:
I bought a bikeholder at Saturn. They have several bikeholders from Hama and not expensive. Mine is even waterproof.
Click to expand...
Click to collapse
I'll take a look in the Saturn.
jayjay101 said:
Seems to me that no one sells this bike holder in Netherlands. Here is an ebay seller in Germany, you can order there if you don't mind.
Click to expand...
Click to collapse
If i cant find one in the Saturn i'll order one from Germany.
Thanks for the both of you.
I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Thanks!
-J
CLIP
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
sjmoreno said:
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
Click to expand...
Click to collapse
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I think I read on his last email that he's got 120 CLIP cases coming in the next shipment.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Yeah, I heard that too about the magnets on the M1.
I am very happy with my CLIP case. In my opinion it is the only Apple quality accessory we have for the gTab at the moment. It's well worth the extra cash and I can't recommend it any better.
Thanks SJ! Exactly what I'm looking for. Appreciate the pic.
-J
StingRay_ said:
sj
...another forum thread said that magnets in that case cause the screen to freak out...
Click to expand...
Click to collapse
I tried moving a small (1/4" diameter x 1/8" thick disk) rare earth magnet near the screen of my GTab, and didn't see any effects. Has anyone else tried any experiments? How large is the magnet in the case?
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
ZebTheCalvinist said:
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
Click to expand...
Click to collapse
available now both black and white on AliExpress for $58 shipped, if you would rather spend the time waiting for it in transit from Asia rather than waiting for it to get restocked @ Steve.
Check the thread here.
insight76 said:
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
Click to expand...
Click to collapse
No. I looked into this a few weeks ago (don't remember where I posted that) and the Xoom and gTabs are different sizes. If I remember correctly the gTab was bigger/longer than the Xoom.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
As an M1 owner who's used it for a couple of weeks now, I can tell you that the magnet issue, like most things on the Internet, is blown way out of proportion. I use the tablet daily at work, have used it shopping for replacement flooring/furniture for our flooded gameroom, and sitting on the reclining sofa playing Angry Birds. I've never had a problem with the magnets reducing screen responsiveness or "freaking out". My only complaint is that over time, the GTab tends to settle further down in the case, half-hiding the camera and all but covering the ambient light sensor. If you don't plan on propping it up on a desk as often as I do, it makes a wonderful case.
M1 Case and G Tab Screen
I got an M1 case on Monday so I've had it for 3 days now. The fit, feel and look of the case are all excellent so far on mine, however, the it does mess with the screen. The longer it stays in the case the worse it gets. I have done tests in and out of the case, putting to sleep or not, rebooting or not and now have no doubt it is the case but I am not sure if its actually the magnets or not. It could just be the case itself touching the edges of the screen all day. In any case, (some pun intended) the longer it stays in the case, the harder you have to press the outside portions of the screen to get it to react. Mine eventually gets to the point where you cannot press hard enough to get the keys on the keyboard to function. When this happens I put it to sleep, pull it out of the case, wake it up and it works like new again. I will probably be investing in a black clip myself in the near future. This could just be a problem with my particular Gtab and it may not effect others at all but that is my short bit of experience with the M1 Case.
There's a few black clip cases in stock at it2steve's web store now.
WI Global Technology Case for GTablet - $16, delv'd
miatawnt2b said:
I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Click to expand...
Click to collapse
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
and before anyone asks...
yes, those are LED indicators by the back/menu/home/search buttons.
It's a custom mod which can be seen here
slsmag said:
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
Click to expand...
Click to collapse
It's WIT Global. I just ordered one for me. $15.99 shipped. It's coming from Hong Kong, so I wonder how long it will take.
merdely said:
It's coming from Hong Kong, so I wonder how long it will take.
Click to expand...
Click to collapse
Mine arrived in just about 2 weeks.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Hmmm been using the M1 for a few weeks now. Never noticed this magnet issue. I know magnets can mess with hard drives but never heard of it messing with an LCD. Doesn't the ipad 2 smart cover have like 70 magnets?
EDIT: Looked it up, 31 magnets.
Okay, so let me start with saying: I already have a case. Its the solo studio iPad/eReader jacket in black and blue. I LOVE it. BUT its not functional with the use in the lap or laying in bed as how i would like it to be. So, I have looked on electroniccrap.com and saw some pleasing cases.
I need help with deciding which would be a better buy.
White Clip Case OR The FUSE in gray
I am leaning more towards the clip case because I don't need very much protection because I pretty much never drop anything (I am obsessively way too careful when it comes to new electronics), but i do use a laptop case when traveling and stuff.
Tell me the pros and cons of either or, or just both!
Please help me T_T
jjkoolj8282 said:
Okay, so let me start with saying: I already have a case. Its the solo studio iPad/eReader jacket in black and blue. I LOVE it. BUT its not functional with the use in the lap or laying in bed as how i would like it to be. So, I have looked on electroniccrap.com and saw some pleasing cases.
I need help with deciding which would be a better buy.
White Clip Case OR The FUSE in gray
I am leaning more towards the clip case because I don't need very much protection because I pretty much never drop anything (I am obsessively way too careful when it comes to new electronics), but i do use a laptop case when traveling and stuff.
Tell me the pros and cons of either or, or just both!
Please help me T_T
Click to expand...
Click to collapse
CLIP and FUSE both the better.. CLIP is better if you are traveling usually.
xjarl said:
CLIP and FUSE both the better.. CLIP is better if you are traveling usually.
Click to expand...
Click to collapse
thanks i dont usually travel, but when i do i use the laptop case. And I think im going to get the clip case as long as it will fold completely back so i can read in bed or anywhere else without having that annoying flap, flapping around .
jjkoolj8282 said:
thanks i dont usually travel, but when i do i use the laptop case. And I think im going to get the clip case as long as it will fold completely back so i can read in bed or anywhere else without having that annoying flap, flapping around .
Click to expand...
Click to collapse
one of the features I personally like about the clip is that when you do fold it all the way back the main clip (the one used to hold it closed) makes it easier to hold on to.
I'm not a big reader but I do use it for the forums. Plus you can rotate it to use that clip in either hand. of course, laziness used effectively breeds efficiency
...sent from my 'un-stock' g2x
I love the look of the red / black and white/black Seidio Active, but I've read that it's not grippy.. so that if I put it on the car dash and take a turn, it might be sliding all over.. It's a minor point, but important to me.. I don't drive enough to buy a car dock, so I'm skipping that option...
Any suggestions for a rugged case that won't slide, or has anyone actually used the Active on their dashboard with non-sliding results?
Thanks..!
namebrandon said:
I love the look of the red / black and white/black Seidio Active, but I've read that it's not grippy.. so that if I put it on the car dash and take a turn, it might be sliding all over.. It's a minor point, but important to me.. I don't drive enough to buy a car dock, so I'm skipping that option...
Any suggestions for a rugged case that won't slide, or has anyone actually used the Active on their dashboard with non-sliding results?
Thanks..!
Click to expand...
Click to collapse
Because I love the Seido Active so much myself, I would recommend something like this for your dash. Pretty cheap and has some good reviews.
Thanks! That's perfect, I was getting frustrated because that Active case was perfect in every way, except that.. I think it's a great solution.
Now to find the place with the cheapest Active Combo set.. Gotta have my holster!
namebrandon said:
Thanks! That's perfect, I was getting frustrated because that Active case was perfect in every way, except that.. I think it's a great solution.
Now to find the place with the cheapest Active Combo set.. Gotta have my holster!
Click to expand...
Click to collapse
This one seems to be the cheapest Yeah, I wouldn't want to use any other case. I've seen those sticky pads at Office Depot and Radio Shack if you don't want to order it from Amazon, also.
Those grippers hold really well. I tested it once and it could almost hold my old phone at a 90 degree angle. I just cut a strip the width of the phone and put it somewhere... no need for the whole pad.
The whole pad would be nice cause if u got extra **** theirs more room
Sent from my ADR6425LVW using XDA App
Any recommendations? I have only found one made for the N6 but there maybe one fit for the note series our iPhone 6+ that will work.
This is what I found: http://www.amazon.com/dp/B00OHFHOZ8/ref=cm_sw_r_udp_awd_.WRCub1FY0X05
It's not an armband but i'm a large fan of the flip belt. It has no problem holding my iPhone plus, and i was able to keep using my current case.
http://www.amazon.com/dp/B00JF9DWWU...olid=C0LWKVFSITDN&coliid=I2RQDRRU6DVILU&psc=1
V1ViD said:
It's not an armband but i'm a large fan of the flip belt. It has no problem holding my iPhone plus, and i was able to keep using my current case.
http://www.amazon.com/dp/B00JF9DWWU...olid=C0LWKVFSITDN&coliid=I2RQDRRU6DVILU&psc=1
Click to expand...
Click to collapse
Interesting. Do you run with it? Do you track your runs if you do, and is it accurate? Otherwise, for less than $10 the arm band in the OP looks decent to me.
fictionoid said:
Any recommendations? I have only found one made for the N6 but there maybe one fit for the note series our iPhone 6+ that will work.
This is what I found: http://www.amazon.com/dp/B00OHFHOZ8/ref=cm_sw_r_udp_awd_.WRCub1FY0X05
Click to expand...
Click to collapse
i ordered this one and it will arrive soon. I will come back and report in when it does. I like the hard case design because my experience with the pouches is pretty mediocre
rufflez2010 said:
Interesting. Do you run with it? Do you track your runs if you do, and is it accurate? Otherwise, for less than $10 the arm band in the OP looks decent to me.
Click to expand...
Click to collapse
I have not ran with it yet, too big to keep in the pocket and don't care for the idea of holding out.
fictionoid said:
I have not ran with it yet, too big to keep in the pocket and don't care for the idea of holding out.
Click to expand...
Click to collapse
Thanks for the info. I just ordered the running armband. I like the design of it better than the generic one I have for my Note II
Another Belt- based option.: http://www.amazon.com/SPIbelt-Small...e=UTF8&qid=1416851897&sr=1-1&keywords=spibelt
I grabbed one of these from a Running store a while back and have used it with my Galaxy S II (T989), Nexus 4, and now my Nexus 6. The nexus 6 is a bit of a tight fit but it works perfectly and does not fall down so long as you tighten the band correctly and have it above your hips, and not on them. I pair this with a cheaper BT stereo headset while running because I can't stand cords at all while working up a sweat.
rufflez2010 said:
Interesting. Do you run with it? Do you track your runs if you do, and is it accurate? Otherwise, for less than $10 the arm band in the OP looks decent to me.
Click to expand...
Click to collapse
I do run with it and it does track my runs rather accurately.
Just came across interesting alternative to running arm band: http://www.amazon.com/dp/B00PUO6KCI?psc=1. Ordering right away, hope it will go well.
krups said:
Just came across interesting alternative to running arm band: http://www.amazon.com/dp/B00PUO6KCI?psc=1. Ordering right away, hope it will go well.
Click to expand...
Click to collapse
@krups I'm curious about this one too. Please report back on how well it stays attached to your pants/shorts. Thanks!
Froryrory said:
@krups I'm curious about this one too. Please report back on how well it stays attached to your pants/shorts. Thanks!
Click to expand...
Click to collapse
Just had a 3 miles run with running buddy 6+. It attaches very well with my track pants. Nexus 6 snugs nicely (seems like it will fit well with snap on case) and do not bounce while running. It do feel awkward mainly due to how big phone is. I think will get used to in a while. Its definitely better than arm bands. Attached few pictures.
I was running yesterday with the Google Nexus 6 Easy Fitting Sport Case and Armband Combo from SUPCASE.
I'm really happy with the armband. It holds the Nexus 6 perfectly in place.
Xaraxx said:
I was running yesterday with the Google Nexus 6 Easy Fitting Sport Case and Armband Combo from SUPCASE.
I'm really happy with the armband. It holds the Nexus 6 perfectly in place.
Click to expand...
Click to collapse
Does the rubber case part of the armband easily come off or is it pretty tight on the phone? I was thinking about getting this one.
On the front the case covers all the non-display area. The Phone sits tight in the case. To get the phone out I always pull on an edge on the bottem (2nd photo). So I have no problems to get the phone out of the case. The whole case consits of rubber.
Xaraxx said:
On the front the case covers all the non-display area. The Phone sits tight in the case. To get the phone out I always pull on an edge on the bottem (2nd photo). So I have no problems to get the phone out of the case. The whole case consits of rubber.
Click to expand...
Click to collapse
Awesome. Thanks for the detailed reply and photos. Looks like I'll be purchasing one then!
I've always used TuneBelt. I went through AB86 for the Galaxy Nexus, then AB88 for the Nexus 5 (I had to order the AB88 from Germany because it was not available in the UK at the time).
As again, the TuneBelt is not available in the UK yet, I found this one on Amazon and gave it a try as it was so cheap http://www.amazon.co.uk/gp/product/B00QV6849G?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00 although knowing it was going to be crap.
Well, it's not completely crap, but you get what you pay for, no surprise, and it's too tight. It came with the cardboard insert for the Note 4. It's even tight for the Note 4! (tried with my son's)
So I just went ahead and ordered the AB92 from the Netherlands http://www.ipodhoes.nl/tune-belt-ab92-sport-armband.html
I probably won't be using it as armband at the gym as the phone is so big for my arm it looks ridiculous , but it's still more protection than just the case and with BT earphones I don't need it on me but I like to be able to see the screen for the HR monitor (with a pouch style it would not be possible).
I'll post pics when it arrives.
gr4ce said:
So I just went ahead and ordered the AB92 from the Netherlands http://www.ipodhoes.nl/tune-belt-ab92-sport-armband.html
Click to expand...
Click to collapse
Following from my post above, I have just received the TuneBelt and here are the pics (lots so I'm linking to my G+ post).
https://plus.google.com/u/0/photos/+GraceCarlyle/albums/6112691355079402545
I'm using a Spigen SlimArmour case which is still quite big and it fits very well, it would even take a bigger case.
If you don't use a case, it might be a bit too big, maybe the AB91 would be best.
fictionoid said:
Any recommendations? I have only found one made for the N6 but there maybe one fit for the note series our iPhone 6+ that will work.
This is what I found: http://www.amazon.com/dp/B00OHFHOZ8/ref=cm_sw_r_udp_awd_.WRCub1FY0X05
Click to expand...
Click to collapse
Just received this myself. I thought it was a case but its just a flimsy rubber .
Sent from my Nexus 6 using Tapatalk
gr4ce said:
Following from my post above, I have just received the TuneBelt and here are the pics (lots so I'm linking to my G+ post).
https://plus.google.com/u/0/photos/+GraceCarlyle/albums/6112691355079402545
I'm using a Spigen SlimArmour case which is still quite big and it fits very well, it would even take a bigger case.
If you don't use a case, it might be a bit too big, maybe the AB91 would be best.
Click to expand...
Click to collapse
awesome! im getting my nexus 6 this week and i already have my seidio case for it. this is perfect! 16" max so looks like i gotta get the extender (i hate having to spend more money!). so i take it the headphone ports won't work, but i guess i can use my bluetooth headset instead
http://www.amazon.com/Armband-iPhone-Plus-5-5-display/dp/B00NMWWIJY/ref=pd_cp_cps_2
is this the one? looks like it's a little cheaper than their actual site, and i do have to buy the extension piece as well, so if i can save a few bucks here and there that would be great
I have the same one that xaraxx posted and love it
Sent from my Nexus 6 using Tapatalk