I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?
I noticed today when i woke up i cannot press the right side of the screen and get any kind of response. It is only about a thumbs with of the right edge but this prevents me from being able to hit send on text messages on the default messaging app and also on go sms as the send buttons are in the same general location. Is my phone just FUBAR or is there some way i can resolve the issue. Have tried power cycling and thats about it. I guess i need to know if this is a software issue or a hardware issue and if there is any way to find out and fix the problem.
I've been having the same issue actually. In the bottom right corner, anyway.
Like when I go to attach a picture to a text message, I have to hit the text box first so the paperclip button is out of the corner. I've also had some trouble unlocking with the camera or touching it from the Navbar, where it's positioned in the bottom right corner. :/
Murasakiii said:
I've been having the same issue actually. In the bottom right corner, anyway.
Like when I go to attach a picture to a text message, I have to hit the text box first so the paperclip button is out of the corner. I've also had some trouble unlocking with the camera or touching it from the Navbar, where it's positioned in the bottom right corner. :/
Click to expand...
Click to collapse
I have similar issues with that when my phone is plugged in. And my acreen often locks up kinda with the last image on the screen being the only thing you see until you reset.
Ciloteille said:
I have similar issues with that when my phone is plugged in. And my acreen often locks up kinda with the last image on the screen being the only thing you see until you reset.
Click to expand...
Click to collapse
I don't think I've had an image stuck to my screen yet. I have this problem even if it isn't plugged in, which is really strange. Not sure why it's so unresponsive, takes several tries to unlock/select.
And kudos for being in Portland too! :good:
Have either of you found a consistent way around the problem or a way to resolve it? Also are you running the phone in the base state that you bought it in or is it rooted / unlocked?
I just tested my phone, by opening the browser to google.com (mostly white background), all around the edge of the screen. And I can see feedback animations for all my touches around the edge of the screen. So I don't think there is any problem with the touch digitizer, at least on my phone. Phone is still stock, rooted and TWRP.
I have touch animation when I touch the bottom right corner on the lockscreen, but it doesn't always drag/ripple out. Sometimes it acts like I've pulled my finger off so I have to do it again.
Rooted, unlocked, stock.
After touch responsiveness got increasingly worse i contacted AT&T and they are sending me a free replacement since these issues seem to be covered under the one year warranty. Just throwing that out there in case anyone else gets as frustrated with the problem as I have and cant find a permanent fix.
I can confirm that I am having very similar problems... it is getting worse.
I am stock rooted and unlocked.
It is getting harder and harder to press things, fling actions (like scrolling through a list) hardly move a thing.
I just installed a multitouch visualizer and whenever I have 2 fingers on the screen and then go to cross them (start with fingers in opposite corners, move one up and the other down until they pass each other in the middle) it actually loses both fingers and then sometimes only one pops up again on the screen.
Can anybody try an app like this Play Store Link.
I've had similar results with 2 other multitouch testers.
Is it my phone, or everybody's?
----EDIT-----
Figured I would install the Base ROM (7.0>7.3) because either it was a software issue and maybe the ROM would fix it, of it was a hardware issue (I really didn't think it should be acting like that) and I would try to get it replaced.
The Base ROM fixed my issue (for now, fingers crossed).
Now using a multitouch visualizer, the contact points are always seen, even when the fingers cross.
Don't know what caused it, but it was software (at least for me).
----EDIT----
Just plugged in the charger again... now the touchscreen is acting strange again... this phone does strange things when plugged in...
I've recently been dealing with a frustrating problem. When touching the capacitive buttons, I have to touch slightly above the back, home, and menu symbols in order to get a response; touching the symbols directly yields no response. Originally I thought it may be the ROM but that is not the case as I get the same results when I boot into recovery and touch the buttons. Is the digitizer going bad or are all of the EVO LTE's like this and I just never paid it any attention? The phone has no physical damage or water damage to it. I'm half tempted to take it to Sprint and get it replaced but I'm running
hardware rev 0003
S-OFF (LazyPanda)
hboot 1.12.2222
....and don't want to give that up...
Everything else as far as the touch screen works fine, it just seems like the buttons have become misaligned. Is there an app to check or calibrate the buttons?
My wife has had her 920 for all of 40 days and dropped it yesterday (they are slippery as a bar of soap). The screen cracked diagonally across the lower left hand corner, disabling the touch (the display still works) in that area along with the back and start buttons. Without one or the other of those two buttons, the phone is practically unusable; you have to power cycle between anything you want to do. As an interim solution, I was wondering if it was possible to reassign - through the registry - the camera button to provide either the "back" or "start" command? This would at least make the phone usable until we figure out how to get it fixed or replaced. Thoughts? Peace. Thanks.
Due to damage done to the LCD of my S II I had to replace it. So I did that and I noticed two very serious issues. The first being the unresponsive touch buttons to the bottom right and left of the device. They were also not illuminated, there was also no evidence to suggest they were not connected correctly.
The second issues and by far the biggest is the unresponsiveness of the touch screen. When I enter my pin the first touch takes a few seconds to respond, then it proceeds to work as normal until the phone is unlocked. From that point whenever I try doing anything it behaves erratically. For example when I dial out it is painfully slow to respond to the inputs given to the touch screen.
Is there are way to address these issues and remedy them if so how could this be done.
Looks like a bad piece of hardware. Did you get the spare part from a trustworthy store? About the softkeys, you could check if the connector is connected correctly. As a workaround, you could use onscreen buttons.