Related
Hay all,
Does anyone know of a seller that does Screen protector that actualy fit?
The one that came with the phone was slightly too big an was causing air bubbles on the screen as it over lapped on to the outter case
Thanks.
http://cgi.ebay.co.uk/CP-SCREEN-PRO...h=item220391548743&_trksid=p4634.c0.m14.l1262
Or
http://cgi.ebay.co.uk/CP-FULL-BODY-...h=item280331549647&_trksid=p4634.c0.m14.l1262
I have the first one - fits well and does the trick. I have just ordered the second one so the rear and sides of the device have protection.
Pricey, but lifetime guarantee and made of a cool material.
Good customer service too.
Have had Martin Fields for quite a while now.
http://www.martinfields.co.uk/dis_product.asp?model=HTC_HDTouch&modeln=Touch%20HD&prod_type=screen
It fits really well, I almost can't tell that it's on besides for two whitish lines at the left and right edges of the screen but it's under my silicon jacket so I see none of that =)
hi,
search the forum, this is a popular topic. i agree the htc protector is a little too big, i have also tried the Brando anti-glare, which is a little short top to bottom. a cheap ebay alternative was a good fit, but too shiny, prone to fingerprints.
I got the EXiM SPOC one from ebay, its the exact size but only problem is it doesn't have a hole for camera.
No sticky touch, smooth and washable/reusable. Very good, always had EXiM, never been dissapointed.
You can also try www.purplemoo.com they only produced fitting protectors. Very good customer service.
I have just bought this from ebay
I spent a couple of frustrtaing minutes trying to fit the one that came with the phone
Has anyone used the wet application type (eg the Clear Protector mentioned above)? I've bought one of these but the idea of putting water on my device fills me with dread, especially as there's a big hole in the facia for the microphone. This seems like lunacy!
I bought an InvisiShield screen protector, not whole body, came with rubber squegee and spray.
Spray your hands, peel of protector, spray film not phone, place on and squegee off. Left in airing cupboard overnight, and you cannot notice its even on there. THe only thing I did was wipe of the front with a damp cloth as the spray stopped your fingers running smoothy over it.
As a testiment to it, I dropped my Touch, bounced twice... body has a couple of minor scratches but they stop where the protector starts... would recommend!
nicelad_uk said:
I got the EXiM SPOC one from ebay, its the exact size but only problem is it doesn't have a hole for camera.
No sticky touch, smooth and washable/reusable. Very good, always had EXiM, never been dissapointed.
Click to expand...
Click to collapse
Man i bought this EXiM SPOC and what a load of ****!
The worse screen protector i've ever used. It is so easily scratched and whenever i drag the stylus across the screen, it leaves marks on the screen.
A cheap 99 cent screen protector on eBay that i bought for my mums Omnia is better quality.
AVOID at all cost.
This is EXIMs claim.
"Ultra Anti-Scratch
•Enjoy stylus writing on your PDA. EXiM® has properly sheltered it for you.
EXiM® Screen Protectors could last for a long period of time without affecting its smoothness and transparency because of the stiffness of the raw material used. Anti-Scratch Coating is applied on top of the PET Film surface to further increase the durability. Different hardness of coatings are used in different types of EXiM® Screen Protectors to best meet different needs and applications."
My ass, it scratched without me doing anything. One small drag on the screen protector makes marks.
http://cgi.ebay.com.au/CP-FULL-BODY...|240:1318|301:1|293:1|294:50#ebayphotohosting
Is this yellow or is it displayed as such to show what it does?
It seems it's for the whole device rather than just the screen.
adrianlee188 said:
http://cgi.ebay.com.au/CP-FULL-BODY...|240:1318|301:1|293:1|294:50#ebayphotohosting
Is this yellow or is it displayed as such to show what it does?
It seems it's for the whole device rather than just the screen.
Click to expand...
Click to collapse
Did you read it or just look at the pic?
Q: Why is Clear Protector pictures shown in color?
A: It's shown for your viewing knowledge. Actual Clear Protector is Crystal Clear!
I picked up the realook protector, and love it. it covers the screen perfectly (really) and looks and feels like the original glass. problem is the verizon high gloss tpu case i bought for the phone last weekend causes the edges of the protector to lift up when the case is squeezed even slightly.
is anyone using the amzer case with a protector? does this work better?
http://www.amazon.com/gp/product/B00691RJ80/ref=oh_o04_s00_i01_details
tspderek said:
I picked up the realook protector, and love it. it covers the screen perfectly (really) and looks and feels like the original glass. problem is the verizon high gloss tpu case i bought for the phone last weekend causes the edges of the protector to lift up when the case is squeezed even slightly.
is anyone using the amzer case with a protector? does this work better?
http://www.amazon.com/gp/product/B00691RJ80/ref=oh_o04_s00_i01_details
Click to expand...
Click to collapse
This made me lol. This is one of the only reasons I don't use a tpu case on my phones. I know the cheaper ones usually don't wrap as tightly and don't go over the bezel as much, making it so they don't touch the edges of the screen protector. I've never tried that one but from what I remember the Diztronic ones don't mess the protector up.
Got this case yesterday and have been using it for a day now. I will leave it on for now. This case is similar to an Otterbox Defender Series. It is more stylish though. The corners are angled instead of thew typical rounded. This is a thicker/beefier case, so if thin is what you want this one is not for you.
It has a hard plastic inside that the phone goes into, with a built in screen protector. This protects the front and sides.
Then another piece that covers the back and sides again. With the back being plastic and sides a TPU material.
This case is great for those that need the extra protection. The sides have a good texture for great gripping. The built in screen protector is a plus. All buttons are easy to use. It also has a cover over the charging port and earphone port. The cutouts for the speaker, camera and sensors are all exceptional.
I left my Spigen Curved Crystal film screen protector on the phone when installing the case and the touch screen responsiveness is still fine.
I had this for my Note 5 and it was a great case. However I just order it and it's junk IMO. It's more thin the outer layer and doesn't offer a lot of cusion. I'm dissapointed with it. I loved it for the Note 5 but not this time. It's like they went cheap on it.
Does your Ebony Wood case make a pop noise like the case doesn't fit snug. I have that case on my phone with just the pre installed screen protector and in the bottom right corner the case isn't snug so if I put pressure on the phone it make a pop or click sound like it's moving in the case, I messaged 1p about this and they said it's cause I don't have the 3d screen protector I installed.
My question is does anyone have Ebony Wood case on their phone if yes, does it fit good without the 3d screen protector?
other than that & that really isn't a big deal the case look pretty good. it's the tightest case I ever had actually
Yup, not the ebony but another wood one and it creaks and pops
Edit: I have the 3d screen protector on. The creaking is the case. It did it when I didn't even have a screen protector on
Ebony wood case here with original screen protector, creeks too
No creaking here. Haven't used it since spigen came out.
It's not as snappy as day 1.. But for the thin case it is, made if wood.. I'm happy.
I'd imagine creaking would be to some degree normal as it is wood? Thin wood at that?
I cant find a good case for ROG 3 on flipkart of Amazon. Which case are you guys using? where did you buy it from??
I am using Lighting Armor case as I need to use the air trigger. If you do not care for the function of air triggers (dual & slide), can get IMAK case from aliexpress.
I'm also using the lighting armour , I like it ok it drains power but I still like it
I am using the average tpu case that is available for rog 3, i had to make cut out for the side mounted type c ports though
I'm using this: https://www.aliexpress.com/item/4001345047036.html?spm=a2g0s.9042311.0.0.5d6e4c4d4DwYCq
It's not perfect, but provides enough all around protection, the cutouts are in place.
The included tempered glass screen protector is of good quality, but the black border covers a few pixels on the sides.
It's pretty cheap, I can recommend buying it to protect your ROG Phone 3 - as I said, it's not perfect, but good enough.
Using this one with a tempered glass in the front and a silicon film in the back
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Used to use the lighting armor case until the slippery uncovered aluminium side caused me to drop the phone yesterday, now the phone has a dent on the top right corner of the frame. Lighting armor has the best look of all the cases out there. Now using Zshow case which should prevent it from hitting the screen flat down if I ever drop it again. I'm lucky the phone didn't fall face down with the lighting armor case which would have guaranteed a cracked screen.
I have the imak tpu case too but it cause the tempered glass to lift.
Besides the tempered glass being lifted issue, what's your experience/ feedback regarding your IMAK TPU case (is it with extra corner protection)?
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
I'm getting the hydrogel film screen protectors - Hoping that screen lift is not an issue.....
What's your experience or opinion regarding the general damage/ drop protection with this case?
Quality, overall fitting & feel?
It will protect if dropping on the corners as well as face down. However dropping on the back might be a problem because the camera lens are protuting out (although the case cover the camera lens). Placing the phone on the table will also result in wobbly phone when using.
---------- Post added at 06:15 AM ---------- Previous post was at 06:13 AM ----------
Quality, would say it is better than those generic cheap tpu case (which has worse fit than imak), feel wise, it is slippery on the back.
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
It covers the side? The picture on amazon looks like it is an open side design. I don't see slapping that case will provide a good grip.
lornranger said:
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
Click to expand...
Click to collapse
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Davisk8 said:
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Click to expand...
Click to collapse
I am using Asus Original Screen Protector without antibacterial coating. The antibacterial protector is not available in my country. Great protector, no blocking of edge unlike the cheap china protector which has thick black borders and block the edges of the display.
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
Thanks for this, I did think about getting this over.
I'm using the magnetic flip case which is great, but no front lip so don't drop the thing like I did, broke my display as the screen protector didn't quite cover all of it and a tiny stone hit the outer edge.
Not the end though as I've bought another, and will get it repaired under insurance consider it a lesson learned.
￡2.32 23%OFF | Safety protective Glass for Asus Rog Phone 3 ZS661KS Oleophobic Screen Protector For ROG Phone 3 Strix Tempered Glass Film
https://a.aliexpress.com/_B0aeTT
This was with the rog case which in all honesty shouldn't come with it.
This is the protector, don't bother with it, I've another coming that has smooth edges, looks decent so will see.
Turns out the one I've ordered might be the same Asus sells.
￡1.59 | For Asus ROG Phone 3 Phone3 ZS661KS / Strix 6.59" 21D 9D Full Glue Cover Toughened Tempered Glass Film Screen Protector Guard
https://a.aliexpress.com/_B0iH9b
the lighting case but I installed a diy wireless charger because I have so many already laying around
[/COLOR]
elmor0 said:
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Click to expand...
Click to collapse
FEEDBACK
Took about 5 weeks to arrive (from China).
This IMAK case is good build quality and fit over all, could have been a bit more snug - the extra corner padding does not make it look slick, and I am not sure if it is worth it on balance.
There is a 2 mm lip all around the front panel to help with screen protection.
Cut-outs are spot on - including for air-triggers/ 3 mics/ heat vent/ side USB ports. No cut-out for SIM-tray though but it's better this way.
Camera module is fairly well protected.
No issues with air-trigger related squeeze gestures.
The Hydrogel clear gel screen protector had a ?extra notch cut-out just left of the front camera (?? why) but otherwise the rest of the dimensions were spot on. It came as a set of x2 in one pack, which was a nice surprise. Included a helpful set of instructions/ link to video.
I preferred it to be short by about 1 mm all around the edges to minimise the risk of "lift" when the case is compressed in pockets/ when using the squeeze gestures etc.
The touch feel is smooth and has a good response. Visibility through this screen film is fine; no glare issues. I prefer these type of gel screen protectors to glass.
Has anyone come across a case that doesn't need to be removed when connecting to the accessories (eg Twinview, Mobile Desktop Dock)?