Related
Guys I'm looking for a real original htc touch screen, till now I've found only clones. I tried them 2 times, and differently than the original one, when I dropped the phone with the clones 2 times on 2 I immediately broke the touch screen. Instead when I dropped the phone with the original one I had no problem at all.
The clones just suck...
Do you know where to find the real original touch screen?
http://cgi.ebay.co.uk/GENUINE-HTC-T...UK_Mobiles_Accessories_RL&hash=item2eb0678ba3
supplied me genuine lcds & digitizers for a variaty of HTC & Nokia devices.
Big part with final result on Diamond 2 is correct bonding of digitizer, non solid setting adhesive should be used & full bonding around the edges must be achieved.
Solid setting adhesives transfer shock without any absorbtion & non bonded areas flex & resonate causing potential fracture points.
Of course ****e quality chinese copy parts play a big roll in problem repairs too ...
Actually I bought exactly the new touch screen from that seller. And that touch screen wasn't the original though.
You can see that it's not an original one looking at the zoom bar. It's shorter that the origial one. The genuine one gose from edge to edge, instead the clone one is smaller. And the overall colour is different. I can post pictures of both original one and clone one.
Anyway what do you mean by solid setting adeseive??
Just put in a PayPal claim for non delivery & get your money back. recently got LCD & digitixer for 2 Diamond repairs, both parts were original. If sent you copies do them over, get your money back & give them some nasty feed back.
No hard solid adhesives should be used, needs to be soft rubber type glue to help absorb & stop shock loads transfering to digitizer.
Ok here is a picture where you can see the difference between the original and the one bought from that seller. Is yours similar to the one marked original or to the one marked clone?
http://img98.imageshack.us/img98/2456/touchscreen.jpg
One marked original, markings are light & the - & + icons run almost in-line with edges of screen.
Also back lighting bleeds through too much on cheap copy digitizers.
They supplied you a non genuine part so screw them over big time.
I live in Asia & by my digitizers & LCDs from UK as all our local parts suppliers sell china spare parts of supposing different quality pending on how much you are willing to pay ! Quality of almost all chinese digitizers & LCDs are simply ****e & not worth the postage stamp & do nothing but pollute the environment with manufacturing waste & a product that is waste as soon as removed from packaging.
Sorry to thread hi-jack but iv'e been looking for this answer everywhere and everywhere says what type of adhesive to use but no one gives a specific make-brand or link to buy any .
I was looking at buying a full case from the same seller as my phones current case is looking a little worn out and although the digitizer is perfect and is falling out i dare say when i try to get it off it will smash into a million little pieces so i'll order the full set. But my question remains what is the best type of glue to use who makes it and where can i get it from?
Oh and would be handy to hear if you have any tips or experiences using it.
Thanks
Digitizers, don't buy here, go there!
I too ordered 2 digitizers from E-cell; both were fakes!! They won't go into any discussion with me, they just told me to send them back. They KNOW that is crap there selling and advertise it as genuine...
BE AWARE DON'T BUY THERE, IT IS A WASTE OF TIME AND MONEY.
Yesterday 2 new digitizers arrived. I ordered them on ebay at:
Service Parts UK
Sarfraz Arif
10 sunny bank grove
Bradford
West Yorkshire
BD37DJ
United Kingdom
They work perfectly, this guy has 100% positive feedback on ebay. So if you want a good replacement, try it.
Digitizer glued to LCD?
I contacted a repair man and told me it's a waste of time buying replacement digitizer as the orginal is stuck onto the LCD and you risk damaging the LCD if you attempt to remove it.
Is this true or is he scaring me off in doing the job myself.
Also I read that you need adhesive tape is this true?
If refering to Diamond2, LCD is not bonded any any way to digitizer.
Digitizer is bonded to alloy front chassis only.
This is one of the easiest HTC models to strip & repair, LCD or digitizer can be fitted individually no question.
If you take care with disembly & be gentle with all ribbons it will be simple.
some common sense & previous experience comes in handy de-bonding & rebonding digitizer but its far from scary.
Adhesive tape is not the best option but perhaps the simplest.
I used a tiger brand u30 adhesive, black in colour & sets rubbery so act as a good shock absorber. advantage of adhesive bonding is better full radius bonding resulting in a more shock & direct impact resistant digitizer.
plapic said:
I contacted a repair man and told me it's a waste of time buying replacement digitizer as the orginal is stuck onto the LCD and you risk damaging the LCD if you attempt to remove it.
Is this true or is he scaring me off in doing the job myself.
Also I read that you need adhesive tape is this true?
Click to expand...
Click to collapse
I have replaced mine 4 times. Used 3m black rubbery adhesive tape.
If you where my neighbour i would have changed it for faster than you could drink a cup of coffee
It's a bit tricky to find god digitizers on Ebay.
This is one of the best I bought. The backside should look like the one in this auction.
There's allot of rubbish digitizers on ebay.
http://cgi.ebay.co.uk/LCD-Touch-Scr...Parts_Tools&hash=item414fee51b4#ht_2380wt_987
Sticky situation
@Mr B
Where do you buy this tiger brand u30 black adhesive? I googled it and found no results.
Also if I ever needed to replace the digitizer again will it be easy to remove if it had u30 adhesive on it?.
Mister B said:
If refering to Diamond2, LCD is not bonded any any way to digitizer.
Digitizer is bonded to alloy front chassis only.
This is one of the easiest HTC models to strip & repair, LCD or digitizer can be fitted individually no question.
If you take care with disembly & be gentle with all ribbons it will be simple.
some common sense & previous experience comes in handy de-bonding & rebonding digitizer but its far from scary.
Adhesive tape is not the best option but perhaps the simplest.
I used a tiger brand u30 adhesive, black in colour & sets rubbery so act as a good shock absorber. advantage of adhesive bonding is better full radius bonding resulting in a more shock & direct impact resistant digitizer.
Click to expand...
Click to collapse
ebay
@Lasker1
I bought this Touch Screen Digitizer For HTC Touch Diamond 2 II T5353 and waiting for it to arrive. It was the only one I could find within my own local ebay listing that looks to have the right full length zoom guide at the bottom. Come over for a cuppa.
Lasker1 said:
I have replaced mine 4 times. Used 3m black rubbery adhesive tape.
If you where my neighbour i would have changed it for faster than you could drink a cup of coffee
It's a bit tricky to find god digitizers on Ebay.
This is one of the best I bought. The backside should look like the one in this auction.
There's allot of rubbish digitizers on ebay.
http://cgi.ebay.co.uk/LCD-Touch-Scr...Parts_Tools&hash=item414fee51b4#ht_2380wt_987
Click to expand...
Click to collapse
plapic said:
@Mr B
Where do you buy this tiger brand u30 black adhesive? I googled it and found no results.
Also if I ever needed to replace the digitizer again will it be easy to remove if it had u30 adhesive on it?.
Click to expand...
Click to collapse
Fortune IT hardware shop BKK. No done a second replacement yet but tested adhesive prior to using it for assembly & it should be quite easy to clean to about 90%.
Tape is the simplest but varies in adhesive strength & can result in digitizer being not flush fitting & not evenly bonded resulting in easy failure with impact loads.
Also most people who use tape end up doing second replacement.
Ruud van Beek said:
I too ordered 2 digitizers from E-cell; both were fakes!! They won't go into any discussion with me, they just told me to send them back. They KNOW that is crap there selling and advertise it as genuine...
BE AWARE DON'T BUY THERE, IT IS A WASTE OF TIME AND MONEY.
Yesterday 2 new digitizers arrived. I ordered them on ebay at:
Service Parts UK
Sarfraz Arif
10 sunny bank grove
Bradford
West Yorkshire
BD37DJ
United Kingdom
They work perfectly, this guy has 100% positive feedback on ebay. So if you want a good replacement, try it.
Click to expand...
Click to collapse
Hi.
Almost a 1 yeard old post but can you tell me the seller ID that sent you the digitizers or any other that you used to get good quality ones?
I really need it and most I found looks very low quality items.
Thanks.
Accidently stepped on my tablet and now the screen is cracked on the corner. Where can I find a screen replacement and is there a replacement tutorial?
Did you buy the tablet with a credit card? Some cards offer insurance for accidents like yours. You might qualify for a replacement.
webosb said:
Accidently stepped on my tablet and now the screen is cracked on the corner. Where can I find a screen replacement and is there a replacement tutorial?
Click to expand...
Click to collapse
A member has reported he same issue before. here is the thread
http://forum.xda-developers.com/showthread.php?t=894003
And he could not find a replacement screen. I guess that you should contact Viewsonic tech support to see what can they do or how much would they charge you?
festivus said:
Did you buy the tablet with a credit card? Some cards offer insurance for accidents like yours. You might qualify for a replacement.
Click to expand...
Click to collapse
i paid with my debit card. (I dont think my debit card gives me those protections)
@tyy10002 thanks for the link
If you cant find one anywhere else i would try a local glass store. A lot can cut to dimensions and maybe they couldd make one to custom fit our screens?
webosb said:
i paid with my debit card. (I dont think my debit card gives me those protections)
@tyy10002 thanks for the link
Click to expand...
Click to collapse
does you debit card have a visa or mc logo on it? (most do these days) If so you have the option of using it as a credit card or atm card even though both will withdraw funds from your bank account and to you it looks the same the two transactions are different. long tory short if you entered a pin at the pos then you're right you probably don't have those protections (I'd still check with your bank) but if you just swiped it and signed like you would with any other card than you should be covered.
I have a Cracked Glass Too!
I have a cracked glass on my GTablet as well. I ordered a replacement LCD screen B101AW06 V.1 10.1" WSVGA GLOSSY LCD SCREEN LED GLOSSY
and found out that I really don't need it now because the actual glass covering the LCD was the issue. So if anyone needs one, I will sell it to you what I paid $50 plus the shipping to you.
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it. Or, I would have to find a glass company that could possibly make me one. I asked to speak with someone in mgmt and was promised that he would call me back within 48hrs with a real solution, but I haven't heard from anyone yet. So it appears that I am stuck until someone can give me a replacment glass screen solution.
Anyone out there have a better solution to my issue?
I sympathize with you but I think you are doing it wrong...
vhecs said:
I have a cracked glass on my GTablet as well. I ordered a replacement LCD screen B101AW06 V.1 10.1" WSVGA GLOSSY LCD SCREEN LED GLOSSY
and found out that I really don't need it now because the actual glass covering the LCD was the issue. So if anyone needs one, I will sell it to you what I paid $50 plus the shipping to you.
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it. Or, I would have to find a glass company that could possibly make me one. I asked to speak with someone in mgmt and was promised that he would call me back within 48hrs with a real solution, but I haven't heard from anyone yet. So it appears that I am stuck until someone can give me a replacment glass screen solution.
Anyone out there have a better solution to my issue?
Click to expand...
Click to collapse
Help! I really need a glass screen replacement for my G-Tablet...... the new LCD I bought is basically useless because I don't really needed. I need the glass screen!
Well Vhecs, you answered your own question...
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it.
Click to expand...
Click to collapse
Shouldn't be to hard to figure out.
I have a similar problem... accidentally lost my grip, and now there's a crack radiating out from around where the camera is located. Thankfully most of the cracking over the LCD screen consists of large pieces, rather than tiny fragments that would tend to fall out.
Does anyone know if it's practical to try some sort of resin designed to infiltrate glass cracks?
I don't care about a perfect solution, but at least something to diminish the appearance of the cracks and make it less likely for the glass fragments to fall out would be great.
Bit Banger said:
Well Vhecs, you answered your own question...
Shouldn't be to hard to figure out.
Click to expand...
Click to collapse
haha. LOL! What about the serial numbers?
vhecs said:
I have a cracked glass on my GTablet as well. I ordered a replacement LCD screen B101AW06 V.1 10.1" WSVGA GLOSSY LCD SCREEN LED GLOSSY
and found out that I really don't need it now because the actual glass covering the LCD was the issue. So if anyone needs one, I will sell it to you what I paid $50 plus the shipping to you.
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it. Or, I would have to find a glass company that could possibly make me one. I asked to speak with someone in mgmt and was promised that he would call me back within 48hrs with a real solution, but I haven't heard from anyone yet. So it appears that I am stuck until someone can give me a replacment glass screen solution.
Anyone out there have a better solution to my issue?
Click to expand...
Click to collapse
Do you still have the extra lcd screen?
Reckn said:
Do you still have the extra lcd screen?
Click to expand...
Click to collapse
You can get it for $63 shipped worldwide.
http://www.ebay.ca/itm/B101AW06-V-1...ultDomain_0&hash=item53e8c0eb33#ht_2497wt_905
I can't find any info on this, but it looks like it could be tricky to replace. I cracked my glass by dropping it onto stone, still works OK. You can pick up digitisers pretty cheap on ebay (£20 UK) but does anyone know how to replace? I read that they can be glued to the LCD?
Thanks
Google for the fixit website, if someone has done it there will be a tutorial, or you could follow the guide on here to upgrade your sd card....only because you have to take the phone fully apart. You need to check if the lcd is glued or like the iphone 4 resin. If they are a sealed unit you'd be better off getting the lcd/digitizer combo on ebay. trying to separate an lcd from the digitizer is asking for trouble imho.
I have ordered a digitiser, really hope the digitiser is not glued to the LCD, there is a big price difference. I'll let you know how I get on.
I bought a Mozart with wrecked digitizer and also want to repair it. The digitizer is on its way, so in a week i could tell you how difficult or maybe easy it is.
If you are faster, please post your experience.
I found this thread on xda.cn, and it seems that the lcd isnt glued on the digitizer, so lets hope so
hxxp://xxx.xda.cn/newshow.php?snid=2167
EDIT: sorry cantpost links, so must change the x's to t's and w's
I have got my digitiser now, looks brand new. Just need to find the time to replace, might upgrade the SD card at the same time.
Done
I did this with Andy's guide to help: http://lifeinthefastlaneok.wordpres...-7-mozart-sd-card-memory-upgrade/#comment-225
I used this guide to replace my digitiser (the glass) which I smashed. The good news is that the digitiser is not stuck to the LCD at all. I just bought a grade A digitiser off ebay for £20 which was pretty much perfect - glass was perfect with a couple of small marks on the back case, but basically like new.
There were a couple of differences to this guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
I now have a phone as good as new, I didn't replace the SD at the same time but probably will do at some point when I can stand loosing all my data.
Found time today to replace the digitizer. I also used Andy's videos for instruction. And it's really not that hard. Pretty easy for someones first mobile phone repair.
Well done, I would add for anyone else needing to do this, be very careful not to touch the inside of the digitiser or the LCD when you have it apart! Also have a glasses cloth handy for removing any dust particles just before you put it back together.
I do have one strange thing however - before I had intermittent issues where I could not slide the screen up when locked for 10 seconds or so. No I have a slightly different issue when unlocking - it doesn't always let me press on the right hand 3 numbers on the PIN screen! So it seems the unlocking issue some people have is due to a hardware issue. My digitiser was second hand so I might ask for a replacement, but I can change my pin so that it is not an issue.
My Mozart touch-screen hardly works at all plus my wife's Mozart has a cracked digitizer glass (still working fine).
So silly me I took the plunge and ordered three cheap replacement digitizers via eBay (from Hong Hong). They arrived today and all are s**t useless.
When I opened the box I smelt the rat when I spied the HTC logo on each was blanked out on the outside of the plastic zip-lock bags (with what looked like black felt pen), plus each glass has minor blemishes/scratches. Comparing each with the digitizers I removed from my and my wife's phones, they have a different design of ribbon cable conductor layout plus there are indications the plastic moulding isn't as well finished in a couple of places. Either these are factory rejects or knock-off copies. Lesson learnt :-(
Anyway, I now need to buy genuine HTC parts.
Any pointers toward reliable sources appreciated, thanks.
KJ
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Can someone who as changed a screen on this phone using Andys guide, please tell me how easy or hard it was, and how long does it take??
And would be grateful if someone could give me a link to the correct digitizer for this phone....
I am in the UK and have been qouted 50 pounds at a phone shop for the to supply and fit screen...
Did you see my post?
There were a couple of differences to this (Andy's) guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
The most tricky thing for me was getting all the dust off the LCD and the digitsier, as soon as you get it apart things start sticking to it like crazy. Have a clean glasses cloth around.
It takes about an hour on your first go. The main thing is to get the orange ribbon cablle in fully, it can be tricky - you need to get a good grip on it (fold it a little) and push it home quite hard, otherwise you get it all back together and find it doesn't work.
I have had 2 dodgy screens off ebay, £50 sounds OK if it is a brand new original HTC screen.
Or just search for 'htc mozart digitiser' on ebayt there are loads.
hsclater said:
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Click to expand...
Click to collapse
Thank you for that. A close look at the ones I bought from china I'm sure now are removed from phones with faulty digitizers, then repackaged as new. One of the three had significant dust and dirt on the inside of the digitiser screen. I've requested a refund via PalPal disputes.
I've ordered some digitizers from ecell in the UK. I'm led to believe by them that these are genuine HTC factory supplied spares.
KJ
I just replaced my 4th screen (1 broke, 2 dodgy).
This one is perfect - as new condition and works perfectly, my last one was not responsive in some situations e.g. lock screen.
This is the one I got (UK)
http://www.ebay.co.uk/itm/130498971267?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Of course, your mileage may vary - some are probably good, some not. Replace it, if it doesn't work ask for another, etc.
My new digitizers arrived today from the uk. Horray they are genuine HTC spare parts properly packaged. The downside is they don't include the frame the glass sit in and is adhered to.
So I watched the official HTC Mozart disassembly video on youtube to see how to remove the existing digitizer glass from the frame - got it apart ok after heating the unit to soften the adhesives but it didn't come away entirely cleanly i.e some of the adhesive foam broke away and was left on the underside of the glass.
So... check on eBay and found sellers selling refurbished screen frames ready for a new glass to be attached.
Will update on progress once they arrive.
KJ
just ordered my digitiser today... wish me luck...lol
poolielad said:
just ordered my digitiser today... wish me luck...lol
Click to expand...
Click to collapse
Well I am now buzzing... have just changed my screen at it works perfect.....
£50 they wanted at the shop...it cost me £13....
Just to let you know how easy this is to do........If I can do it, anyone can..
Did anyone find a reliable supply in the end? I just cracked my digitiser so looking to replace it...
--edit--
Also, how much have others paid? Don't want to be ripped off for some sub-standard part.
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
fx.lagwagon said:
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
Click to expand...
Click to collapse
Mate, I had the same problem. However it seems no one was able to help me either.
I also purchased a digitizer from Ebay for my Mozart - the exact same inverted issue occurred with me. I wasn't able to find a solution.
I'm in Australia with a T8697 model. The digitizer I received from Ebay had a circle around the windows button at the bottom - This was not on my original screen.
In the end, I purchased a digitizer from an Australian business. Cost double the Ebay digitizer did, so I hope it works... Haven't received it yet, but I'll let you know when I put it in.
What model Mozart do you own?
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
steber04 said:
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
Click to expand...
Click to collapse
No, do not waste your time attempting to separate the glass from the LCD, you WILL break the LCD.
You would come out a little bit cheaper ordering the glass and LCD assembly alone BUT it can be kind of a hassle sticking that part down.
Ordering it with the frame/housing is 100% how I recommend going about the screen repair for a G3 since it comes glued to the frame/housing... it's less of a hassle you'd have to worry about. Just transfer all of the internals to the new frame and you're golden.
However, I will recommend that you order the screen from the link I provided below... as the warranty on this screen will be good for 1 year, plus it's even a little cheaper. They are just currently back ordered until the 7th, but it's well worth it for a 1 year warranty.
Good luck.
https://www.wholesalegadgetparts.com/product.php?productid=23575&cat=2424&page=1
steber04 said:
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
Click to expand...
Click to collapse
you are right, the small parts include camera, lcd foam, speaker, and so on, my customer had bought the vs985 lcd here, you can take a look, hope this will help you
My screen had a crack in it i had a tmo g3 layn round that had a bad sim reader so i jus swaped the motherboard and bam no more crack in my screen
One hour ago, I accidentally broke my moto e gorilla glass! The touch is working fine, but the glass is shattered, my phone is already out of warranty and is rooted! Is there any way to change the gorilla glass? How much it will cost me just to change the front panel? I saw the front panel on this site > https://www.parts4repair.com/front-glass-for-motorola-moto-e-xt1021-black/ is it good? Should I repair it from local shop or give it to service centre? I know they cost 2500+ for replacement of glass and display, but I have only my front glass broken, the display digitizer is working fine! Should I buy the above glass and fix it on my own? I think I can fix it as I'm a electronics engineering student lol! Or should I give it service centre, I really don't wanna pay 2500+ for my 2 year old 7,000rs phone!
lionking5202 said:
One hour ago, I accidentally broke my moto e gorilla glass! The touch is working fine, but the glass is shattered, my phone is already out of warranty and is rooted! Is there any way to change the gorilla glass? How much it will cost me just to change the front panel? I saw the front panel on this site > https://www.parts4repair.com/front-glass-for-motorola-moto-e-xt1021-black/ is it good? Should I repair it from local shop or give it to service centre? I know they cost 2500+ for replacement of glass and display, but I have only my front glass broken, the display digitizer is working fine! Should I buy the above glass and fix it on my own? I think I can fix it as I'm a electronics engineering student lol! Or should I give it service centre, I really don't wanna pay 2500+ for my 2 year old 7,000rs phone!
Click to expand...
Click to collapse
Do not buy just the glass. I am 100% experienced regarding this thing. I have replaced my display assembly two times. I know very well about the structure of the display assembly. Firstly the glass, digitizer and the LCD are BONDED together. If you attempt separating them, you'll literally f**k up the LCD and digitizer. Even local shops won't be able to do it. It can only be done in the factory using automated machines which actually manufacture the display assembly.
Service center: NO. Don't go there. They will charge you nearly the price of a new phone!
Now you have two options. Either buy the display assembly (glass+digitizer+LCD) from here: http://www.ebay.in/itm/LCD-Display-...T1022-Black-/252415179667?hash=item3ac51dfb93
or
Buy the display assembly along with the side frame from here: http://www.ebay.in/itm/LCD-Display-...T1022-Black-/252415182326?hash=item3ac51e05f6
The display assembly is glued to the sideframe with a super strong adhesive. You can't separate the display from the frame without using a heat gun to melt the glue. If you do this, you'll also melt the sideframe and chrome grills partially, which will further f**k up the look of the phone. This is a really tough job so I would say don't do this or get this done (I already have got this done the first time I had to get a new display). Then you will have to fix the new display with special adhesive or double sided tape which is a very unclean job.
Now you are left with the option to buy display assembly along with frame. This is your best bet but the costliest option. You get the entire front half of your phone which is easy to replace. No need of gluing or ungluing anything. Just unscrew and screw in the new front half of the phone.
The links I gave above are from a highly trusted seller which sells 100% original product. I bought from them. They are selling 100% genuine product and the product I received is same as original.
When I had got the display replaced the 1st time, I got it done from a local shop (it was without frame) and the display was fine but not really as good as original and it was not gorilla glass. I used to miss the original so much.
Then 2nd time I bought from this seller, finally got back the original moto display! So buy without giving a second thought. Trust me.
I got it on 20% discount but that promotion has ended. You can use code EBAYHIKE06 for 6% discount.
I am from Mumbai. I am selling my Moto E parts -
Things which I am selling -
1. BATTERY
2. SCREEN
3. Everything Else except motherboard
Kailashk said:
I am from Mumbai. I am selling my Moto E parts -
Things which I am selling -
1. BATTERY
2. SCREEN
3. Everything Else except motherboard
Click to expand...
Click to collapse
I'm just curious. What would you do with the motherboard?
nilanko said:
Do not buy just the glass. I am 100% experienced regarding this thing. I have replaced my display assembly two times. I know very well about the structure of the display assembly. Firstly the glass, digitizer and the LCD are BONDED together. If you attempt separating them, you'll literally f**k up the LCD and digitizer. Even local shops won't be able to do it. It can only be done in the factory using automated machines which actually manufacture the display assembly.
Service center: NO. Don't go there. They will charge you nearly the price of a new phone!
Now you have two options. Either buy the display assembly (glass+digitizer+LCD) from here: http://www.ebay.in/itm/LCD-Display-...T1022-Black-/252415179667?hash=item3ac51dfb93
or
Buy the display assembly along with the side frame from here: http://www.ebay.in/itm/LCD-Display-...T1022-Black-/252415182326?hash=item3ac51e05f6
The display assembly is glued to the sideframe with a super strong adhesive. You can't separate the display from the frame without using a heat gun to melt the glue. If you do this, you'll also melt the sideframe and chrome grills partially, which will further f**k up the look of the phone. This is a really tough job so I would say don't do this or get this done (I already have got this done the first time I had to get a new display). Then you will have to fix the new display with special adhesive or double sided tape which is a very unclean job.
Now you are left with the option to buy display assembly along with frame. This is your best bet but the costliest option. You get the entire front half of your phone which is easy to replace. No need of gluing or ungluing anything. Just unscrew and screw in the new front half of the phone.
The links I gave above are from a highly trusted seller which sells 100% original product. I bought from them. They are selling 100% genuine product and the product I received is same as original.
When I had got the display replaced the 1st time, I got it done from a local shop (it was without frame) and the display was fine but not really as good as original and it was not gorilla glass. I used to miss the original so much.
Then 2nd time I bought from this seller, finally got back the original moto display! So buy without giving a second thought. Trust me.
I got it on 20% discount but that promotion has ended. You can use code EBAYHIKE06 for 6% discount.
Click to expand...
Click to collapse
thanks for the share, but there aren"t any remaining pieces available in both of the links any other link bro??
Kailashk said:
I am from Mumbai. I am selling my Moto E parts -
Things which I am selling -
1. BATTERY
2. SCREEN
3. Everything Else except motherboard
Click to expand...
Click to collapse
how much you will cost for display and a headphone jack? are these components in fine condition?
lionking5202 said:
how much you will cost for display and a headphone jack? are these components in fine condition?
Click to expand...
Click to collapse
Both components are working fine and are in good condition. If you are interested, Contact me on whatsapp : 8446515089
lionking5202 said:
thanks for the share, but there aren"t any remaining pieces available in both of the links any other link bro??
Click to expand...
Click to collapse
This is the seller's number: +919003890217
Contact him on whatsapp and ask him to relist the required item.