Hello all,
Picked up an unlocked version of the S740 from ebay, very nice
I have managed to get internet and email etc working but can't for the life of me get MMS to work. I do have the settings but it seems a bit more complex on a WM phone then I'm used to.
Just wondering if any other T-Mobile users of this device have got MMS to work, and if they have can you help me out?
Thanks.
I've managed to do this, so hope this helps.
1) Open Settings from the Start Menu
2) Choose, 0 More, 0 More, 5 MMS Setting
3) Select Menu (the right-sided action button thingy), 1 MMSC Settings
4) Menu, New, Give it a name (TMobile MMS is a good suggestion)
5) MMSC URL: http://mmsc.t-mobile.co.uk:8002
6) WAP Gateway: 149.254.201.135
7) Port: 8080
8) Connect via: The Internet
9) Max sending size: 300K
10) WAP Version: 2.0
11) Done (left-hand thingy button)
12) Set as default
13) Enjoy sending pictures responsibly
Good luck,
Smudge.
IT WORKS!!!!!
Haha many thanks mate, they were the last settings I needed to complete the phones set-up.
Cheers.
No probs. And YAY!
Related
Finally got a custom ROM on my phone, NFSFANs, and I must say I really like it, but for some reason I am unable to MMS. I looked through all the places i thought would be obvious settings, but i cant find anything
anyone else experience this?
same issue
i have been haveing the same issue on my touch pro, i dont see were to fix it when i try to send it starts to then says unable to send does any one know of a fix for this, i am useing Energy.HERMAN.23518.StandardM2.5_27.
use this
use this cab, it appears that messaging is still not ready for the new 2011 builds...
This will disable the HTC Messaging and take you back to the winmo messaging.
You also need the second cab to take your phone back to what sense2.1 used and it should work...
There is also a third file attached, that one you install by itself, you have to go to the "all messages" then you have to go to the menu>options>settings and put your settings.
Search on it a little more, If I find the full information again I will let you know. I read on it last night and got my wifes touch pro2 to mms again so this should work for you too...
Maybesz?
I beleive this may be what your after, these settings are carrier specfic in order to get MMS working
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1 Default Setting Cricket MMS and Change WAP default Port 1&2 to 8080 and WAP Default Time Out to 10000
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS Ensure Gateway Port is 8080 ISP is Cricket MMS, MmscURI is set to http://mms.mycricket.com/servlets/mms , Name is Cricket MMS, Ensure the next 4 settings WAP1RecvDefault Size, WAP1Send WAP2 Recv and WAP2 Send are set to 1024000 WAPType to 1 (WAPType to 1 Ensures WAP 2.0)
WspHeader Accept: application/vnd.wap.multipart.related
X-Cricket-MDN this is your 10digit cell number (this might say X-Verizon or X-Sprint Change the value name to X-Cricket-MDN) Value Data 555-555-5555 < of course put in your own phone number no dashes.
Under UI\Domain http://mms.mycricket.com/servlets/mms
Under UI\SizeLimit WAP1RecvLimit 1,2,3 set everything on that page (12 settings in all) 1024000 (this is part of your 1000K send and receive limit)
HKLM /software/arcsoft mms ua/config/UI
find EnableServerEdit and change it from 0 to 1
HKCU\Software\Microsoft\Windows\CurrentVersion\Int ernet Settings Where it says Connections, Delete that entire string Hold down stylus on Connections circle it and delete it, This is what keeps the MMS from sending. Bad thing is every time you open explorer it re-writes this registry. To solve that many of us have just used something else besides Explorer. Like Opera, Firefox Mobile or Skyfire.
You can still use these browsers without writing the Connections Value. If you don’t want to use anything but Explorer, you are going to have to go into this registry file and delete the Connections string every time to send MMS or until someone comes up with a registry hack to Auto delete this value every time you close IE …Close Regedit.
Now go to your messages and click menu/MMS options and then click server and click add new. Add new or if you already have one called something else just click it and click edit...you need to change these settings to
Server Name Cricket
Gateway leave blank
Port Number 8080
Server address http://mms.mycricket.com/servlets/mms
Connect Via Cricket MMS
Sending limit (should be 1024000 if you changed these settings correctly in regedit)
Wap version Wap 2.0 (Wap 2.0 should be pre selected, if it is don’t touch it. If it keeps reverting back to 1.2 when you click close? Go back into regedit and select WapType 1 as mentioned previously, this forces it into WAP 2.0 without it MMS won’t work.) Now if you have more than 1 select the cricket one you just configured and hit set as default then go back to HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS and delete the other configuration, when you go back into settings CricKet should be the only one there and it should be default.
Start\Settings\Connections\Connections Under the General Tab Enter Cricket. Under the Modem Tab put in Cricket Mobile Web select modem to cellular line. Click next put in #777 to dial to Cricket, click next… User Name: [email protected] Password: cricket Domain: Leave Blank, click finish…under proxy settings, check these 2 boxes (this network connects to the internet, and this network uses a proxy server to connect to the internet) Proxy Server: wap.mycricket.com click advanced. The only thing with a value should be HTTP wap.mycricket.com:8080 the rest blank. Click ok and ok again, this ok should bring you back to the connections screen at the bottom click advanced. Click select networks. Under both drop downs select Cricket. Click Ok Go into Exceptions Click add new URL for each of the following settings you are going to need to click add new url again, these don’t all go under one “Add new URL” Block
*mms.mycricket.com/servlets/mms
*.mms.mycricket.com/servlets/mms
*mycricket.com/
*.mycricket.com/
*.mms.mycricket.com/
*mms.mycricket.com/
Then Soft Reset.
COPIED FROM http://forum.ppcgeeks.com/showthread.php?t=25859
no credit to myself
AHHH!!!! His reply makes better sense for your question then mine.
I bow to you oh gran masta!!!
Using Stephens 2.2 I was able to install apps from the market place.
I then did a couple of things, 1 was to install Universal Androot, the other was to configure my APN settings.
After that I'm unable to install anything from the Market (just paid for 2 apps as well).
Tried a few things, (clear cache, airplane mode etc) but nothing tried so far works, I suspect it could be wrong APN settings, can anyone post their O2 apn settings so I can double check?.
Can anyone suggest anything else to try (i did see a post saying to uninstall market updates from options, but can't find that app (the instructions were a bit vague so I could be missing something).
Thanks
There is a problem with the market either very slow at downloading or it wont download you just have to be patient and keep trying
You mean I've just factory reset my phone for nothing !!!!!!
Fill in adequate expletives here
lufc said:
There is a problem with the market either very slow at downloading or it wont download you just have to be patient and keep trying
Click to expand...
Click to collapse
I'm not sure quite how but I seem to have sorted it out, earlier it wouldn't download
using APN settings I found elsewhere, these were as follows (trying to help others),
----------------------------------------------------------
Name: O2 Internet
APN: mobile.o2.co.uk
username: vertigo
password: password
MCC:234
MNC 10
APN type: default (actually type in default, don't leave it blank)
All others remain as "not set".
2nd access point
Name: O2 MMS
APN: wap.o2.co.uk
proxy: http://wap.o2.co.uk
port:9201
username: o2wap
password: password
server: http://mmsc.mms.o2.co.uk:8002
mmsc: http://mmsc.mms.o2.co.uk:8002
mms proxy: 193.113.200.195
MMS port: 8080
MCC: 234
MNC: 10
APN type: mms
---------------------
Neither the phone's own connection or my home wifi connection would work, did a factory re-set, no APN's configured, setup wireless and downloaded three or four apps from market no problems.
Did a bit more configuring on the phone and then needed some more apps only this time they wouldn't download, same issue as before. No APN's configured yet.
Tried all sorts of the recommended fixes but no success.
Stopped wifi configured this APN :-
------------------------------------------------
Name o2
APN mobile.o2.co.uk
Username mobileweb
Password password
------------------------------------------------
I dont think I rebooted, but after enabling the connection and giving it a couple of minutes to settle, then trying a web page I went back to market and apps have downloaded since (5 apps).
Sometimes I get a "Network Error" when starting and have to close market and try again but so far have managed to install 5 apps.
So, wifi connection sometimes works, which got me wondering :-
I read somewhere that Market uses different ports, is there a list of ports (will search after this) and do they sometimes switch ports, eg if there's a number of connections on one port do they switch to another (and this one is blocked by my firewall).
Do they blacklist certain IP's during busy times, eg server is really busy and I've downloaded apps for 20 minutes (really slow connection at home) so they block my IP ?.
In other words, is this deliberate in order to share overloaded bandwidth fairly ? rather than a problem with phones/settings themselves.
I had 1.6 on my X10 which was ATT branded. Since I was new to android and xda, I just followed a random tutorial of unbranding (or something) to get my phone to 2.1, because it was before the official att 2.1. I updated before I ever tried texting even on 1.6, so that may be the case, but I can't text at all right now. I thought maybe it was from screwing up during the 2.1 update. I'm trying to install the official 2.1 right now to try, but if that doesn't work, does anyone know how to fix this problem? I NEED texting
what do you mean texting doesn't work?
can you not send messages? Have you received any messages?
Need more details...
Sent from my x10 Platinum
I'll say as much as I can, but I'm a noob when it comes to phone so just ask if you need any more.
My contract lets me text, but when I try, it says "could not send". But I can receive them fine.
I have x10 2.1 unbranded right now, since maybe a year ago, used to have 1.6 att.
I think I rooted my phone... I should have, but not sure (lol)
I've never come across this problem before. But you might want to use flashtool to flash one of the custom roms skiing with the correct baseband. If you need help with this, send me a pm.
Sent from my x10 Platinum
nira007pwnz said:
I had 1.6 on my X10 which was ATT branded. Since I was new to android and xda, I just followed a random tutorial of unbranding (or something) to get my phone to 2.1, because it was before the official att 2.1. I updated before I ever tried texting even on 1.6, so that may be the case, but I can't text at all right now. I thought maybe it was from screwing up during the 2.1 update. I'm trying to install the official 2.1 right now to try, but if that doesn't work, does anyone know how to fix this problem? I NEED texting
Click to expand...
Click to collapse
You need to set up your wireless apn go to menu/settings/sony ericsson/settings download then wait a few you will see it flash on then go to back button/wireless & networks/mobile networks/network mode/gsm/wcdma preferred (click it)/access point name there shoud be two, one wireless/one mmsc. if for some reason you have three make sure that the top one (the house icon) is checked or you will be roaming.
Patricks_book said:
You need to set up your wireless apn go to menu/settings/sony ericsson/settings download then wait a few you will see it flash on then go to back button/wireless & networks/mobile networks/network mode/gsm/wcdma preferred (click it)/access point name there shoud be two, one wireless/one mmsc. if for some reason you have three make sure that the top one (the house icon) is checked or you will be roaming.
Click to expand...
Click to collapse
Okay well after clicking settings download, my only service provider is ATT. When I click that nothing happens for a while but then it ends up saying "Could not download settings. Retry?"
But while it's searching, I have 3 APNS, AT&T, ATT, and SEMC GPRS, which gets selected by default. After it says "Could not download settings. Retry?", all I'm left with is 2 APNs, ATT and AT&T. Both of which I put in manually.
I might just not know what you're saying, but i can't seem to make it work
Well try this these are my APNs in USA Calif. and ONLY change the settings i give you and the way they are (case sensitive) if your in this area if not find a friend an look at theirs.
Also you have to wait to see the 3G/H/or E. And maybe set the GSM/WCDMA Preferred first then download settings. You do not have to click it after it downloads it's just telling you that is your connection name. Then go to settings.
Do this first if your go to reset your APNs download or Manually
Delete the APNs you have now then go and do the settings again.
Menu/Wireless & Networks/Mobile Networks/Access Point Name/Click APN/Menu/Delete APN.
Menu/Wireless & Networks/Mobile Networks/Access Point Name/Menu/New APN/ In put settings Menu/Save
If you get something wrong when your in the APN just go to Menu/Discard
First one Wireless
Name: ATT
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMC: 310
MNC: 410
APN type: default,supl (that is a coma , )
In put settings Menu/Save
Second one sms/mms
Name: ATT
APN: wap.cingular
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
In put settings Menu/Save
Patricks_book said:
Well try this these are my APNs in USA Calif. and ONLY change the settings i give you and the way they are (case sensitive) if your in this area if not find a friend an look at theirs.
Also you have to wait to see the 3G/H/or E. And maybe set the GSM/WCDMA Preferred first then download settings. You do not have to click it after it downloads it's just telling you that is your connection name. Then go to settings.
Do this first if your go to reset your APNs download or Manually
Delete the APNs you have now then go and do the settings again.
Menu/Wireless & Networks/Mobile Networks/Access Point Name/Click APN/Menu/Delete APN.
Menu/Wireless & Networks/Mobile Networks/Access Point Name/Menu/New APN/ In put settings Menu/Save
If you get something wrong when your in the APN just go to Menu/Discard
First one Wireless
Name: ATT
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMC: 310
MNC: 410
APN type: default,supl (that is a coma , )
In put settings Menu/Save
Second one sms/mms
Name: ATT
APN: wap.cingular
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
In put settings Menu/Save
Click to expand...
Click to collapse
Not sure if I'm doing anything wrong, but it didn't seem to work. What I did was delete my APNs, input yours exactly like that (and left everything else blank), and then settings download. Still didn't work I have H connection, and it does "connect", but even when I go on my browser, it says the url is blocked or something. I don't know what I did different but before this the browser worked fine, just texting wouldn't work. What about that [email protected] thing? I remember something about that. When I put those in, my browser worked fine.
Also one more thing. While trying to fix it, I thought I might as well update to 2.3 if I unbranded it already. But before that, when I was in 2.1, the text would instantly return with "could not send". Now, when I try to text, it says "sending" for a couple minutes and then after that says "could not send" again.
No do not Download settings again, you just put them in then Menu/save.
By downloading settings after you ether wiped the settings you just put in Or you have like to-many apns an your phone is freaking out trying too find the right ones.
But ya I would update the rom. An "I" would use Wolfs rom mo better faster.
Just watch the video can you can't go wrong then try the steps to setup your Apns
Also if you have a friend on the same network just look at his settings.
How to:
http://forum.xda-developers.com/showthread.php?t=1192988
How to Video: Thanks to BluechipJ
http://www.youtube.com/watch?v=zHBYJW2verg&feature=channel_video_title
xRecovery 0.3 GBready.zip: http://www.mediafire.com/?pnpvpg3cj4gvf0n
How to:
http://forum.xda-developers.com/showthread.php?t=859571
Parts/Apps File:
http://www.mediafire.com/?4khhnle8lyysp
For Att Compatible Phones:
Find below the values needed to update your device data settings to be able to send MMS* and connect to the Internet via your Browser:
1. CREATE A NEW APN (ACCESS POINT NAME). ENTER ONLY THE SETTINGS LISTED BELOW:
FIELD SETTINGS
NAME straight talk
APN att.mvno
PROXY proxy.mvno.tracfone.com
PORT 80
MMSC http://mmsc.cingular.com
MMS PROXY 66.209.11.33
MMS PORT 80
2. SELECT THE APN YOU JUST CREATED.
3. DELETE THE OLD APN FROM YOUR PHONE IF POSSIBLE.
Tmobile Compatible settings
FIELD SMARTPHONE SETTINGS ALL OTHER PHONES
NAME straight talk straight talk
APN wap.tracfone wap.tracfone
PROXY leave blank 216.155.165.40
PORT 8080 8080
MMSC http://mms.tracfone.com http://mms.tracfone.com
MMS PROXY leave blank 216.155.165.40
MMS PORT leave blank 8080
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
That's the settings I use for straight talk, works great. I get 4g just about everywhere here in pa. Mms works great too. I've had straight talk for a year and a half on at&t. Can't complain. If you use alot of cell data they will throttle you slow, but I'm usually close to wifi. I've heard 2GB then they slow you down.
Sent from my PantechP9070 using xda app-developers app
Bushmaster78FS said:
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
Click to expand...
Click to collapse
I'm getting 1.3Mbps down and 657 Kbps up. Pretty happy with it.
To the last poster, I thought Straight Talk didn't offer LTE coverage?! If it did, it'd be an even more amazing deal than I had thought it was!
My data works fine. Got like 6mbps this morn but my MMS wont send for ****. Using an Xperia Ion
Pantech Pocket ATT - Straight Talk MMS Settings
The Pantech Pocket needs to have the Straight Talk APN data loaded to TWO locations.
Both Phone APN and Wap APN need to be setup with the Straight Talk APN settings.
Straight Talk makes it sound like you only need to enter the information in one location.
You need to enter the information in Phone APN and Wap APN, if you want MMS to work!
APN name: Straight Talk
APN: att.mvno
Proxy: Straight Talk value
Port: 80
MMSC: Straight Talk value
MMS Proxy: 66.209.11.33
MMS Port: 80
My Pantech Pocket is running flawlessly on Straight Talk now. MMS is 100% functional. The pictures are getting through. I'm getting 5Mbps download speed and 1Mbps upload speed.
My Pantech burst uses only one apn. On gingerbread and ice cream sandwich. I don't run proxy but the rest of the settings I put in and works good. Seems faster tried it. 40kbps proxy vs 4000kbps no proxy. Not sure why. Any ideas?
Sent from my PantechP9070 using xda app-developers app
HOLY SH!T!!!
I just put in the settings Bushmaster78FS posted and I am now on TRUE 4G with ST. 6Mbps!!! ITS FASTER THAN MY WORKS WIFI BY 3X!!!
AMAZING!!! THANKS BUSHMASTER!
Nice
Thanks for the settings you posted Bushmaster.
The settings provided are the first ones I have used and successfully got both data and mms working with only one APN.
Using Samsung Galaxy S III.
1. My phone is unocked and compatible on both AT&T networks and T-Mobile right now i am using an blue AT&T sim and i am thinking to make the move to T-Mobile network. Do you think i can use the same AT&T compatible sim and just change the APN setting to T-Mobile and have it work on the T-Mobile network or so i have to buy a sim?
2. I heard that you can get a free sim by buying a free phone and just using it on your phone but other people say that those sims are lock to those phones. Which is true?
3. I see that Straight talk sells cheap GSM phones and my GF has her phone on T-Mobile so can i buy one of the ST phones and swap it to use on T-Mobile or are the locked and can they be unlocked?
I just switched from the default straight talk apn to the ones bushmaster posted. I went from 1 mbps to 4.8 on a Nexus 4.
Bushmaster78FS said:
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
Click to expand...
Click to collapse
hey, so i been messing around a bit with everything and i think i found one that is faster: for
username: [email protected]
password: CINGULAR1
apn type: default,supl,mms,hipri
all others are the same i just added these and i feel (maybe placebo effect) its faster like almost 1.5mb.
the username n password i got from the att apn and hipri i guess means high priorty connection. need conformation tho works with n4
APn for Straight Talk on Pantech Breeze 3
shinb said:
hey, so i been messing around a bit with everything and i think i found one that is faster: for
username: [email protected]
password: CINGULAR1
apn type: default,supl,mms,hipri
all others are the same i just added these and i feel (maybe placebo effect) its faster like almost 1.5mb.
the username n password i got from the att apn and hipri i guess means high priorty connection. need conformation tho works with n4
Click to expand...
Click to collapse
I have a unlocked AT&T Pantech Breeze 3 with a Straight Talk sim in it. Am unable to access the web. All my settings still go to AT&T.
Does anyone know the correct APN settings?
I have to go 3 places to do the setups.
# 1 Messaging > Settings > Multimedia > MMS Settings
There I can enter Profile Name: MMSC: Connection Type: Proxy Address:& Proxy Port.
Does anyone know the correct values to put in here?
# 2 My Stuff > Applications > Browser > Manage > Profiles
Profile Name : Home URL: Connection Type : Proxy Address: Proxy Port
# 3 Settings > Network Connectivity > Connection Name > APN : Primary & secondary DNS : Linger Time : Authentication: Username :
Password
Does anyone know the correct values that I need to put in here in order to get my phone to go to the web.
I ha ve voice mail, can call and text. Just not access the web. Can anyone help me here?:
slotalkinwoman said:
I have a unlocked AT&T Pantech Breeze 3 with a Straight Talk sim in it. Am unable to access the web. All my settings still go to AT&T.
Does anyone know the correct APN settings?
I have to go 3 places to do the setups.
# 1 Messaging > Settings > Multimedia > MMS Settings
There I can enter Profile Name: MMSC: Connection Type: Proxy Address:& Proxy Port.
Does anyone know the correct values to put in here?
# 2 My Stuff > Applications > Browser > Manage > Profiles
Profile Name : Home URL: Connection Type : Proxy Address: Proxy Port
# 3 Settings > Network Connectivity > Connection Name > APN : Primary & secondary DNS : Linger Time : Authentication: Username :
Password
Does anyone know the correct values that I need to put in here in order to get my phone to go to the web.
I ha ve voice mail, can call and text. Just not access the web. Can anyone help me here?:
Click to expand...
Click to collapse
absolutely works now i wonder if my AOSP roms will have working RIL...
nocoast said:
absolutely works now i wonder if my AOSP roms will have working RIL...
Click to expand...
Click to collapse
OK, nocoast. You said they absolutely work, would you mind sharing the values with me that you put in all those blanks so that mine will work too.Thanks.
anyone try these settings on S2 i9100 and see speed gains?
APN set, no data.
Hey gang, I've looked far-and-wide and haven't been able to locate a solution so, I throw myself on y'all's mercy and ask if anyone has a clue why I can't receive wireless data on my SGT AT&T GT-P1000.
I received my AT&T Straight Talk SIM the other day and porting the phone over was no issue. However, when I set up the APN I did not immediately reboot the phone due to some confusion about when the service actually transferred. Could this have affected my registration on the ST wireless network?
I've entered the APN settings precisely but, alas, still cannot connect to the wireless data. I really want to move over to ST, not only will it save me $30 a month whilst adding an "unlimited" data plan but, best of all, I'll get to tell AT&T to go pound sand.
Any help would be greatly appreciated.
did you add in the " http://"?
Does anybody now any way to unthrotte. Since we all now that ST throttle after 5gb. I called to ST customers service, they told me that unlimited data is only for navigation.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Hi,
I have an HTC Droid Incredible LTE and cannot send or receive MMS. I have Straight Talk on Tmo network, they were no help whatsoever. Phone, txt, and data all work. Interestingly (maybe related?) when wifi is on I still have the symbol of data going (it's an E with up/down arrows), so I don't actually know which it's using. However, even with wifi off I have data but no MMS regardless of wifi on or off. Preferred network is set to GSM/UMTS mode.
Current APN:
APN: wap.tracfone
Port: 8080 (tried with and without)
MMSC: http mms dot tracfone dot com
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,mms (also default,hipri without success).
I've tried installing Tweakker to auto set it, but somehow it's not compatible with my device & the play store won't let me get it. A different APN app says I'm on Tmo network. I've tried Tmo settings in the past and lost all data & txt. I've also tried Wireless Manager as recommended by another post here without success.
I've tried deleting all APNs in order to reboot & start fresh, but 1 always shows up again by default, similar to the one above. My phone is the default OS. I could give it to my husband to put a custom rom on it for me if absolutely necessary.
I know there are people here using this phone in a similar manner (that's why I got it). Any other things I can try?