Related
Hi Guys,
Just to let you all know that Brodit have released the following TyTn Holders:
Passive Holders, both portrait 848690 and landscape 848691 (with keyboard exposed)
Active holders -Portrait 968690 & Landscape 968691 inc. cig lighter charger
Molex Active holders - portrait 971690 & Landscape 971691- using Molex hardwired open cables for fixed installations and powering GPS units with Molex adapter lead.
To view & buy etc, just type the code into the search box at:
www.dsldevelopments.com
Thanks all,
Bryson
Hi Guys,
Had a lot of questions regarding the Brodit holders for the network carrier variants of the HTC TyTn, and what the Brodit TyTn holders fit:
the range for the HTC TyTn fit the folowing devices:
HTC Hermes - SPV M3100, MDA Vario II, HTC TyTN, XDA Trion, Dopod 838 Pro, i-mate JASJAM and Dopod CHT 9000.
At present we only have the holders available by Brodit listed under the HTC TyTn name, but if yours is one of the above, then the TyTn holders on www.dsldevelopments.com should fit!
Hope that helps all,
Cheers,
How do you put the tytn in the horizontal holder? Does it just slide down? Do you have to connect the cable manually? Is it possible to hook up external speaker/mic with this holder or is it for charging only?
Tony K. said:
How do you put the tytn in the horizontal holder? Does it just slide down? Do you have to connect the cable manually? Is it possible to hook up external speaker/mic with this holder or is it for charging only?
Click to expand...
Click to collapse
Hi Tony K,
Yes you just slide it down into the holder. Yes you have to place the cable in manually for the Horizontal holders (codes ending in ***961) the Portrait versions slid in and dock onto the usb connector (codes ending ***960)
As with all USB devices from HTC it only charges, you need a bluetooth carkit like a parrot kit to get the full benefits of a phone kit in your car, ie additinal mic and audio out through your speakers,
Many Thanks
Bryson
I use the vertical brodit holder with plug for lighter connector. It works great and holds the Tytn securly in place.
i keep on getting dns error when im trying to view ur page. maybey work filter
Has anybody seen a car holder for the HTC Touch HD? Not the univeral ones which fit for a lot of different devices. I mean holders like the ones from Richter or Brodit.
I couldn't find any touch hd specific ... looks like these vendors are slow with expending their product portfolio!
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
so youbuy the holder bit (as you have linked), whats the other part youhave to buy (apart from the phone )
Brodit car holders are here
Hi there,
The holders for our Touch HD's have arrived at the Brodit-site:
http://www.brodit.com/?main=searchb...owModell=D0B8AFF1-0D4C-403F-AF24-7CBF0151CE61
I don't know about other countries/suppliers, but in the neterlands, www.pdaplus.nl says the will have them in 1-2 weeks...
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Can you also use this holder in landscape mode?
Philosoma said:
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Click to expand...
Click to collapse
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
They also offer a 3-in-1, with:
- Mini USB for charging
- 3,5 mm audion for sound out
- HTC Ext USB for original headset
Surely, if it only attaches to ExtUSB the 3.5mm and the ExtUSB for headset won't work? Connecting a HTC Headset from Polaris certainly fails on HD ExtUSB...
rickgillyon said:
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
Click to expand...
Click to collapse
Found them this morning, but 60 quid for the molex one? Bloody hell.. Getting the lighter socket one and will rewire it myself I think.
Hi,
Brodit relesed their holder series for Touch HD.
www.brodit.se
They are great and I use them for a while now.
Can be used in landscape
nf0 said:
Can you also use this holder in landscape mode?
Click to expand...
Click to collapse
If you buy the "tilt swivel" version; you can.
The opening to slide it in will remain on the short side, so if you tilt the holder 90 degrees the phone is held by the upper and lower side and the left OR right side (with the usb-plug).
I have had several holders from brodit for my HTC phones and the phone is always held so tight (without scratching!) that you won't have to worry that the phone will slide out sideways when in landscape-position.
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
I've used a Brodit Proclip on my last three cars, brilliant fit every time, latest is over the vent. Recommended.
galaxys said:
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
Click to expand...
Click to collapse
Yes, I normaly use proclip over the vent so that I'll have the phone near to me and in clear view.
Brodit has amazing produts made of very good and solid plastic. Not like some low cost holders that you might find.
But I think it all depends on the car you have. Brodit normaly has several sugestions to place the proclip, so I think they have it for everyone taste.
Jbs_Israel said:
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
Click to expand...
Click to collapse
I've upgraded from a HTC Trinity (which came with Herbert Richter car mount) and this works very well with the Touch HD - it's a slightly tighter fit, but very stable and allows the car charger to fit easily. Thought some people may find this useful at least as a stopgap until the proper Touch HD one is available
Hi,
What about a good holder that attaches to your windscreen? The Brodit ones are all very well but what happens if you are using a different car? Say if you go abroad and get a hire car, will the brodit holder be able to transfer?
the previously mentioned: Herbert Richter car mount uses a sucker. i am trying to decide between that and the brodit. Herbert Richter car mount isnt out yet for the HD.
Do either of them allow you to use it in landscape as well?
You can buy a sucker for the Brodit too if you prefer (or additionally):
http://www.dsldevelopments.com/brodit/suctionDSL.asp
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
kerni said:
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
Click to expand...
Click to collapse
...until you want to use another car I suppose.
With my n560 I have been using a Brodit activ holder in combination with a Herbert Richter Mounting device for the window. Therefore you only have to buy an adapter-plate for approximately 5€.
It has been over the month for my HTC Diamond 2, I want to get full case for it and do what ever is possible with it to maximize it.
What do you recommend?
I was thinking invisible shield full body. What else would you add to this list?
A mini-usb adapter probably, mini-usb to 3.5mm.
AetieQ is right.. mini adapter is really useful!! i got 1.. how bout capcase??
I think invisible shield by ZAGG is the most important accessories too.I got the full body last month.It is the best case I have ever seen.
Mine would be the hard case or at least a cheap leather case..
this is what i've ordered from amazon few days ago:
Desktop cradle - there are many variations, mostly different in shape. Note that htc cradles cost about triple the time...
Air-vent mount holder - for those that don't like the whole stick of most widescreens .
ZAGG shield - ofcourse.
And a car charger.
krylovpro said:
this is what i've ordered from amazon few days ago:
Desktop cradle - there are many variations, mostly different in shape. Note that htc cradles cost about triple the time...
.
Click to expand...
Click to collapse
That link is for the Touch Diamond cradle, does it fit the TD2 ?
Am using the soft plastic body casings. I used to use the Silicone variants on my HTC touch but they stretch after a while and have to be replaced. They also trap alot of dirt. Just look up HTC Diamond 2 soft plastic cases on ebay, they are inexpensive and are excellent protection. I dropped my BRAND NEW TD2 yesterday and the casing protected the phone, not a ding or dent. That's my must have accessory!
MrGubby said:
That link is for the Touch Diamond cradle, does it fit the TD2 ?
Click to expand...
Click to collapse
DUH! I didn't notice that
But here's the TD2 version: http://www.amazon.co.uk/iTALKonline...4?ie=UTF8&s=electronics&qid=1253622044&sr=1-4
The car charger reminded me of something...
The other day I was leaving for school and noticed that my battery was almost out. So I remembered that I have a cheap USB-MP3-Stereo in my car so I grabbed the usb-cable from my computer and headed for the car. So I plug the other end on where the usb memory stick is usually in and the other end on my TD2. The phone prompted me on what mode to use so I selected the mass memory. As It turns out, I could recharge my phone at the same time I was blasting the songs on my phone out of the speakers. I was really impressed
My must-have accessories for my new HTC Pure would include the following:
--full body Zagg Skin
--Silicone body skin
--Carrying Case; my preference is a horizontal leather with both clip and belt loops
--Multiple USB to 3.5 mm adapters; keep one in the cars, on the motorcycle, wherever I may find myself. They're cheap and very useful
--Battery charger; either the rechargeable kind or the one that runs off a AAA battery that also doubles as a flashlight. I have both
--Several earphones; same idea as the USB adapters.
I have wired remote yet, just perfect. using my topaz as player without touching and turning the screen off... (using with pocket player)
Hi,
any cradle or car kit available?
please no universal holder like CU G100.
thx jürgen
I ask importer in my country, car holder will be avaible in 1 month from Brodit
CarComm has an active and a passive one available.
carcom vs brodit
so, the products are available.
i#m wondering about the hight space between the htc back and the holder by brodit.
the carcomm holder looks smaller.
what do you think?
and: the price difference between active and passive holder is 40€, lol. i think a car-usb-adapter for a few bugs is the better way ...
you're right, i ordered passive brodit for 21€, but it comes in 3 weeks.
http://obchod.sunnysoft.cz/zbozi/121PBR-511075/brodit-drzak-pasivni-htc-touch2.html
currently have the Brodit Passive holder with my HR Richter swivel, with all the Brodit holders I've been quite happy.
Looks decent and fits smoothly, it's worth getting it
E-bay, search T3333.
Great Car windshield holder whit nice price.
Take a look
pdahut.com / store/ product.php?productid=22192&cat=2794&page=1
(I can't post links yet)
hi i just purchased a touch diamond 2 .
Do somebody know if there is a bike/motorcycle holder mount that you can buy so it can fit my motorcycle on the handlebar?
I want to use the gps built-in my touch diamond 2 when im riding Any other ideas is welcome in this thread.
Hi,
Boxit waterproof case.
The D2 fits well and it still allows you to use the touch screen.
It is affected by sunlight though.
Regards
Case
okay not quite the answer i was looking for, but thanks anyway.
I have already found that one and it seems useful.
I guess i'll just have to use the car kit.
This one is for bikes, but you have to buy some krusell pouch.
Krusell bike holder
Krusell bike holder
okay thanks for the link but it just dosnt seem to be my kind of thing.
have used my diamond2 as a speedometer/tachometer + gps logging
it works like a charm behind the windscreen of the fairing.
also tried to capture a video but the camera isnt that good.. or the v-twin shackes things up a bit too much...
dont relay total on the phone - the tacho disapears when some one calls..