Related
Hi all,
This is a small post regarding the silicone case that I got from ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170283532114
After 10 business days or a bit more, finaly I got it and have been using it for the past three days.
Originates from HongKong, the case fits the HD nicely. No saggyness or
extra space, you drop in the phone and it fits good.
The thickness is not extremley thick nor thin, I wouldn't count on it to break
a 6 feet fall, but it will definately help protect it from day to day small bumps and just throwing around.
Touching the silicone material itself feels strange, as my previous silicone case was more on the sticky side. This feels a bit more like human skin (more or less) although I feel that my fingers glide with ease on it, holding it with a grip and putting it on different surfaces usually tends to make it hold with a better grip.
Attached are images taken with the HD.
One small note about the cuts/opennings in the case:
- Turning on/off the screen needs a bit of getting used to since the button is cuvered now.
- No small hole for the LED indicator (which till now doesn't bother me)
I have also included an image to show the size of the package, it is just a bit bigger than the case it self, and they also included a free screen protector (which i'll save for later use if needed).
Enjoy...
Fadi
Why open a new topic...http://forum.xda-developers.com/showthread.php?t=436060
The silicon cases from ebay look all the same...
hmmm Just wanted to have something quickly available for people rather than dig through that thread's pages. (so not really a post post post thread)
Since i read a lot about some different cases thought I'd share my thoughts on this
particular one so that if dear readers would want to buy.
@ MODERATOR, please feel free to remove Post if you see required.
thanks
kokkie said:
Why open a new topic...http://forum.xda-developers.com/showthread.php?t=436060
The silicon cases from ebay look all the same...
Click to expand...
Click to collapse
The problem with that thread is that so many other different types of cases have been posted and discussed in there, so much so that the topic does not match the case anymore and the silicon is just one of the ten thousand cases discussed there
May I request that in this thread, we discuss this case and this case only? If we discuss the other case, it should be for comparision purposes only.
I also use the same silicon case as Fadik, and really love it.
Besides protecting the paint, it also acts as a soft cushion against small knocks. Unlike the invisible shield, which I think would not offer any protection against knocks.
It has very cleverly resolved the issue of power on button and volume control. You can use these control without exposing them to your finger. Therefore, I expect my device to remain new longer, even at those two places.
Fadik, mine does not have a hole to show the led though. This is the only minor flaw of the design. The invisible shield on the other hand, will not have problem showing the led.
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Thanks for the review! I bought the same case a few months ago, although it was advertised as for the Verizon Touch Pro 2. I was unaware they made one for the Tilt 2. Now I won't have to worry about it falling off randomly!
thsi case probably wouldnt work with invisible shield on too huh
Doinshots said:
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Click to expand...
Click to collapse
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
JJHiemenz said:
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Click to expand...
Click to collapse
Man, sorry you had so many issues. The PTT button is indeed covered, but she has had no issues with it at all (hers is remapped to toggle bluetooth on and off). The fit on the screen portion is *very* tight. Took some effort to get it installed properly.
Also, mine definitely said "Tilt 2" on the packaging.
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
sleze said:
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Click to expand...
Click to collapse
Nope, the PTT button still works perfectly under the cover. Does not get accidentally pressed and is responsive when you push it.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
Sounds like skinning/shielding your phone with GadgetShieldz might be the way to go. The GadgetShieldz does take a little time to install but it works. The protective film on the screen is easy to install and bubble free. It makes the phone non-slippery. It would not protect the phone like a case but it does prevent scratches. When installed, it adds very little weight and dimension to the phone.
Actually, there are other protective films/shields but I only have experience with GadgetShieldZ. It might work for you.
Boxwave Praetorian Crystal Slip for Tilt 2
orb3000 said:
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
I wish I'd seen your post sooner! Home Depot and Lowe's does indeed have something like that. I'm sure lots of hardware stores do. It's called Plasti-Dip. I have a can right here You can buy it as spray-on or dip/brush-on applications. I use it on mountain bike parts and tools for extra grip. I'm not positive how well it will stick to a slick plastic surface but it is an option.
BluEyedTiger said:
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
Click to expand...
Click to collapse
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
It's held up quiet nice...even with as much flashing I do (have to remove the bottom piece every time). I've figured out a great way to put it back on that's really fast and easy. Some people say it's difficult to get on. I think the top piece is the hard part but I've taken it off a few times and have no issues there either. It still fits good. If I remember, next time I take it off I'll shoot some pics of how I put it on and upload them.
Learic said:
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
Click to expand...
Click to collapse
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
BluEyedTiger said:
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
Click to expand...
Click to collapse
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Learic said:
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Click to expand...
Click to collapse
Yeah I got mine directly from boxwave. They have like 3 different models of that slip. Most of the adds I saw on Amazon and eBay claimed it would fit on 3 or 4 different TP2 models which I knew it wouldn't. I emailed boxwave about the pics in their online catalog because it didn't look like a Tilt 2 to me and they admitted it wasn't. They said they didn't have one for the pics. Which made sense I mean why spend that much just to get pics but they promised it would fit so I figured what the hell. The hard covers kinda suck.
Thanks for the replies, I guess I will go ahead and order it and see what happens.
I just got the unbranded version of this case off ebay (the seller's id was e-story).
It's not too bad on my unbranded TP2. It's slightly more difficult to slide out the keyboard, and when the screen is fully tilted, the top row of keys are slightly obscured, but nothing too major in my opinion.
I like that the case improves the grip of the phone, but I'm also rather concerned that the case will eventually melt under hotter conditions since the material feels rather gummy.
*Note i have not experienced whether the product lives up to its name or not. I only JUST placed it on my device. This is simply my first impression.
**I included pictures of my device compared to the back parts of the adhesive so you can fully grasp the wonderful "custom to fit" experience.
I just now got as close to perfection as i think i am going to get with placing my "custom to fit" screen protector onto my device. At very first glance i saw that their were going to be some slight imperfections. The random circle on the top right of the adhesive was a dead giveaway. The cut out they have for the top speaker and the bottom row of buttons is hardly CLOSE to the size it should be. It is much too big. I am not sure if it is clear enough in the pictures but their is excess adhesive on the sides. I figured they may be meant to fold down to protect a minuscule amount of siding. At first i could not get it to stick on the sides. But after giving it a few minutes to settle and let the application spray* dry, it seems to be holding. However, the border has really ugly bubbles from the very tony inlay of the front of the phone. The instructions say that MICRObubbles will disappear in their own after a couple days... i hardly find these MICRObubbles though. We will see. I think it is almost supposed to have a "melting" effect on the device. Like heated plastic sort of taking the proper shape over the device.
Now we move onto the back. You will see that i have been given 3 holes instead of 2. (2 being the camera lens and the button underneath). I have no idea what the third was meant for.... I can also forget about taking the backing off of my device as it is now sealed shut with the plastic invisible shield. This doesn't bother me that much since i rarely ever have to take the back out but i know their will be a day where i will need to.
All-in-all the product LOOKS promising still. The bottom line here that i would like to make is that i have NO idea what TouchPro2 they are basing this off of. but it is far from mine. Too far. I need to check but i am also fairly certain they ask for your provider too (in case the device is different than others)
I am also still wondering about the excess sides. it is very random in the back but they make no mention of needing to trim the shield.
*They give you a spray that you use on your fingertips and the adhesive so that a. you dont give it fingerprint smudges and b. it doesnt fully stick right away so that you can "slide" it into place. I found that "sliding" it around was impossible because it still stuck but it did not stick enough to the point i was unable to retry.
I really hope this means something to somebody. Had i read something like this before hand, i may have thought longer on buying the product. I will be sure to write more in the next few days. By the feel of the material on my phone, it seems like it could work really well.
I would also love to know other people's experience with this product and even maybe correct me if anything i complained about was just due to stupidity.
It very much looks like you bought Invisible Shield for the wrong Touch Pro 2 model.
It looks like you have the one for the unlocked/unbranded model:
http://www.zagg.com/invisibleshield/htc-touch-pro-2-cases-screen-protectors-covers-skins-shields.php
When in fact you want the T-Mobile model.
http://www.zagg.com/invisibleshield/htc-touch-pro-2-t-mobile-cases-screen-protectors-covers-skins-shields.php
It looks like the shape of your T-Mob branded TP2 is actually quite different from the unbranded version. The shape of the shield is therefore quite different between the models, based on the pictures on the Zagg website. Also, the layout of the battery cover is totally different, which is why the cutouts on the shield don't match your battery cover. This also accounts for the 3rd small hole on this piece. In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Not to be mean but it's really obvious that it wasn't made for a T-Mobile Touch Pro2 and you should have known that it wasn't the right one.
Just going to the Touch Pro2 forums you can see that there's different versions of the device and ours is usually always referred as the "T-Mobile Touch Pro2" when being specific.
The cover does seem worth buying though.
Yeah i just inquired about it. I did buy the T-Mobile one and they just sent the wrong one.
redpoint73 said:
In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Click to expand...
Click to collapse
Oddly, the Tilt2 had little holes in the back case in the same spot, despite the fact that it is just the battery sitting behind the holes. I always figured it was just a way to give water quick access to the battery compartment to turn that little strip pink incase we ever dropped it somewhere damp...
Does anyone have experience with this case? I know it covers the mic (I plan to drill a little hole).
I just received mine today and I must say I'm very impressed by the quality of the mold they used. Meterial seems top notch. Love this case so far, they also included the new screen protector which is a plus. Ill get pictures up ASAP. I would definetly recommend this case to anyone with an s2.
Sent from my SAMSUNG-SGH-I777 using xda premium
Pictures would be great! I also have a white one on the way, hopefully as I placed an order over the weekend. I intended on modding the thing to get rid/fill in the antenna hole if I ever find the time, too (or find out if it really bothers me that much).
Ok, whats the deal with the corner cutout? I've seen this on several different cases. Does the international version have some sort of pullout antenna?
Case looks nice and classy but for what they are charging they should be offering a case that's specific to the AT&T model.
I recall reading that the corner cutouts are originally for Korean model phones. The antenna was in that area for those phones.
I really like it. It's a nice mix of hard and soft materials. It's flexible, which is nice because it makes removing the case fairly easy (for those of you who want to access the phone's back cover to hot swap batteries).
For the most part, the case feels pretty smooth, which makes getting it out of the pocket an easy process (I previously used the casemate pop case and the rubber sides made it fairly annoying to pull the phone out of the pocket). The case definitely adds more grip to the phone, but overall, it still is a little bit on the slippery side. On the continuum of "slippery vs. grippy" I'd say it's a pretty good balance, but I wouldn't mind it being a little more grippy.
Even though the case is made for the international GS2, it still fits well on the AT&T SG2. The noise-cancelling mic is covered by the case, but I have not had any problems as a result of this. However, you might come into problems if you are trying to use the phone in a noisy environment. I'm a little bothered by the corner cutout for the antennae (for the international SG2) since it really leaves that corner unprotected if the phone happened to fall right on that corner. Then again, i'm just going to take my chances that i'm not going to drop my phone on that exact corner.
The case still keeps the phone very thin and sleek. Also, the case has these tiny sparkle dots that show up on the back of the case, which give off a cool effect when reflecting light. Some may say, they make the case look a little feminine, but I personally don't think they do. In all honesty, you can't even really notice them unless you look close at the case and in the right lighting.
I got the yellow ultra capsule. I've heard one person say that these cases are prone for showing up finger smudges, but at least with my yellow one, finger smudges have not been a problem.
The case covers the volume and power keys. They are still pressable and work fine, but the buttons aren't as sensitive as they are without the case. However, this difference is really negligible for me. Overall, hardware buttons work fine.
I really liked the Body Glove Mirage cases that were made for the Samsung Captivate and the Infuse. In my opinion, this case is just as good as those cases.
can you guys post some pictures? want to see how much it adds to the thickness of the phone.
it does look good from their website though..
Sorry on the delay for the pictures guys, let me know if you need any certain perspectives on some more pictures.
djoutrages said:
Sorry on the delay for the pictures guys, let me know if you need any certain perspectives on some more pictures.
Click to expand...
Click to collapse
what does the unprotected corner look like with that case?
I read a lot of reviews about this case , but not a single review that pointed out a serious problem with this case.
after being so disappointed with it, I also reviews it on amazon .
This was a waste of money !!!
I bought this case cover so I'll have some peace of mind, not fearing that my tablet would fall and break .
I put it over the tablet and it looked great , it felt like it would defiantly keep my note pro 12.2 safe .
BUT, I started noticing that the screen became less responsive to the touch , AND also the pen started to put out some deformed lines.
Around the middle of the screen, strait lines that i drew with the pen became curved , i tried to draw a box and could not get the line strait until i moved the canvas to the side of the screen.
After reading what other reviewers said , I guessed this was something to do with the plastic screen protector part of the case.
So i removed the plastic cover, the screen became more responsive to the touch as before, BUT!!! it changed nothing for the stylus accuracy.
I started putting lines all over my screen and i found out a 1\4inch dead-spot around the home button , the pen could not draw in that area , it just carved around it. This curvature was going through to some extent all the way to the middle of the screen , and was the reason for the strait lines becoming curved .
I thought that maybe it was something with the home button.
IT was Not!
The problem was the strong magnet at the back of the case, the same magnet that holds the hide-away stand in place.
as soon as i completely removed the cover , things went back to normal , and i could draw strait lines once again.
I don't know if having a constant magnetic field could permanently harm my wacom digitizer in the screen.
But since i bought the tablet for art making , it was useless if it don't have good pen accuracy.
If you Buy this Cover for the note, and plan to use it with the s-pen, then forget about it !
AM I THE ONLY ONE WHICH THIS CASE THAT HAS THIS PROBLEM????
No, you're not. Most cases have this problem. In fact I was quite surprised to find that the Samsonite flipcover I bought recently didn't interfere with the Wacom sensors.
The magnetic field doesn't harm the Wacom digitizer. The problem is just that the Wacom digitizer also uses magnetics, and two magnets don't exactly work very well together.
There is no material that can block magnetic fields, so you can't solve it with a simple strip of fabric. (Although a strip of velvet or leather tends to help somewhat) You can try to cut out the magnet.
Something to know: There are two versions of magnetic systems in covers:
> The cheap, generic solution. Which is a single, relatively strong, magnet This causes problems with Wacom digitizers. It also causes problems with the tablets shutting off on their own for no reason.
> The more high-end brands use a different system, of a long magnetic strip or line. The overall magnetic strength is identical, but it is spread out enough so as to not interfere with the digitizers and sensors. My Samsonite apparently has this. (I emailed them.)
gonene1 said:
I read a lot of reviews about this case , but not a single review that pointed out a serious problem with this case.
after being so disappointed with it, I also reviews it on amazon .
Click to expand...
Click to collapse
gonene1 said:
The problem was the strong magnet at the back of the case, the same magnet that holds the hide-away stand in place.
as soon as i completely removed the cover , things went back to normal , and i could draw strait lines once again.
Click to expand...
Click to collapse
Actually, I asked an Amazon Q&A question about it and everyone who answered were too dumb to notice the magnet affecting the pen input. After I provided instructions to prove the problem exists, the price dropped from about $60 to $30. Man I don't get people. I am 100% sure everyone's Gumdrop has this issue, yet people are oblivious about it. Either they don't use the pen or they don't bother actually checking for the problem.
The question I asked:
http://www.amazon.com/forum/-/Tx26FDNR9NR3Y1F/ref=ask_dp_dpmw_al_hza?asin=B00IVEHYPG
After returning the Gumdrop, I bought an Otterbox and I am satisfied.
poetryrocksalot said:
The question I asked:
http://www.amazon.com/forum/-/Tx26FDNR9NR3Y1F/ref=ask_dp_dpmw_al_hza?asin=B00IVEHYPG
Click to expand...
Click to collapse
The last answer you received is:
"Not sure what issues your referenceing but we have been using this case for 3 months now with no issues at all, not even with the stylist."
Ronica Gomez
Me to never has a stylist for my tablet.
very strange what ppl where saying .
I guess most of them use the stylus as a finger replacement rather then a drawing tool.