Hi,
I made use of the below link in a process to upgrade to WM 6.
http://wiki.xda-developers.com/?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
I had succeeded in Hard SPL (now showing SPL as 2.21.olip)and tested whether it is CID LOCKED OR NOT.
It is still CID locked. Because when I tried Rom upgrade from WM 6 Crossbow version it is showing CID error.
In the above link, G4 safe ROMs are mentioned and I don't what versions are they and where to download. All what I have is crossbow , ppc versions and neither are working.
KINDLY, CAN ANYBODY TELL ME WHAT TO BE DONE AFTER THE PROCEDURE IN THE ABOVE LINK. PLEASE HELP ME......
Related
I have already read lots of threads about extended rom unlocker but i didn't find anyone that gives a real solution for this.
I've tried many "Extended Rom unlocker" and i couldn't unlock my rom yet.
Is there any solution for this?
If anyone has an "Extended Rom unlocker" file, it's possible to show the link from where i can download it...
Thanks.
Fred
What Rom you are use?
Some Custom Roms havent setup the EXT_ROM. Then you cant unlock them!! Unlocking is a Driver setting with enabled or disabled Writing Prodection and make them visible!
Read this -> http://www.mobilediskonchip.com/NR/...talling_TrueFFS_for_Win_CE_Rev47.pdf|Installi ng_TrueFFS_for_Win_CE_Rev4.7.pdf
NetrunnerAT said:
What Rom you are use?
Some Custom Roms havent setup the EXT_ROM. Then you cant unlock them!! Unlocking is a Driver setting with enabled or disabled Writing Prodection and make them visible!
Read this -> http://www.mobilediskonchip.com/NR/...talling_TrueFFS_for_Win_CE_Rev47.pdf|Installi ng_TrueFFS_for_Win_CE_Rev4.7.pdf
Click to expand...
Click to collapse
IPL: 2.10.0001
SPL: 2.10.0001
GSN: 02.07.20
OS: 2.10.7.24 PTG
EXTROM: 2.10.7.9330
ROM DATE: 2/9/06
PROTOCOL VERSION: 413.1.03
I would like to upgrade my ROM, or even update my device with WM6, but without unlocking it i can't.
I've already register at HTC site, but there is no offical ROM update for my Qtek S200 G4.
If it's possible to unlock the rom, where do i find an official rom update PTG?
Thanks.
I have the same problem, I cant load any new roms, or WM6, nothing except my default rom.
Please help, how can I unlock rom & load new one to my S200 G4 ?
Thank you
You must first unlock your SPL and then you can flash any ROM you like.
If the SPL ends in "1" the device is a G4 else is a G3.
I have attached the program for unlocking the SPL. I already used it, and now I am testing any ROM I like on my S200.
Just run "RomUpdateUtility..." after you sync your device. If after this procedure on your startup screen apears on SPL "4PDA" you solve the problem.
If you have any questions post them here.
ps:sorry about my english.
This work with W Vista???
I don't know. I didnt tested it on Vista.
hi
i have done the update and it shows 4pda on it, whats the next step to get a rom on it, can you give a short step by step guide and if possible a rom that i can download to try, or a link for roms, i really want the wm6.5, i find it complicated as you can only flash certain roms and a certain way, or is it the same way i have done this hardspl g4?
the radio version is 02.07.02
thanks
hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
mcupurdija said:
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
Click to expand...
Click to collapse
yes this should be notified properly ,also usb switch is missing in instructions too .
I just bought a used 8125. The device was suppose to be standard, but when it arrived it had WM 6.1 custom rom from newbie1221. I also noticed that it is a G4.
IPL 2.1.0001
SPL 2.1.01ip
So is it safe to assume the device is CID unlocked?
Is it safe to flash This Romas it doesn't include ipl/spl?
How will the UK radio work since I'm in the US? My current Radio version is 2.25.11
How can I tell if it's wwe?
It says it's WM 6.1 but I'm confused by this
5.2.19199 build 19199.1.0.0 (AKU 1.0 )
OS: 11.0.1.0 << as you know, 11.x.x.x is for TNT Series or based on
Click to expand...
Click to collapse
Does this mean it's not 6.1?
Please be patient with me it's been a while since I've had WM device. The wiki helped me a lot.
Heya man, welcome to the fold....you can tell if your device has WM6.1 on it by going to START->Settings->System->About, and at the top is will say OS:Windows Mobile 5.0/6/6.1, depending on what you have. Since your IPL/SPL is already Olip'ed, then yes, your device IS indeed CID unlocked....but if you havent done so already, I would download the excellent Wizard Tool availible up here at XDA-Dev and SIM unlock your device aswell. To answer your other question, you should be fine with flashing a different rom, as long as it DOES NOT contain an Extended ROM partition OR IPL/SPL.
No, G4 is always CID locked, regardless you used HardSPL or not (HardSPL only tricks the RUU program, you can always check the CID lock status using WST)
Yes, it's safe to flash any ROMs that doesn't include IPL and SPL.
For the Radio, all Radio ROMs has support for all GSM modes supported by Wizard hardware, just try to see if it gives a better reception.
TNT roms are always WWE (you can see the screenshots, it is always WWE if it is an English ROM)
5.2.19xxx is WM6.1 ROM. TNT used its own versioning in ROM, so don't count on that.
So all that HardSPL'ing a device does is trick the RUU? Didnt know that, I thought that it actually "unlocked" the phone, like we do over in the excalibur forums lol
starkwong is absolutely correct and I endorse it!
Thanks for all the help. I downloaded WST it shows it was Sim unlocked but I have no way of testing. WST shows that the phone is HardSPL. When I try to flash any Roms I get a Error 300 message. So I used the RUU MUN worked perfectly. The phone is my wifes & she is very happy. Thanks again for all the help. The Wizard may be old but it runs great.
Could anyone provide me with info on how to downgrade to WM5? I need to do this for warranty purposes. The guide isn't online anymore for a few months at http://www.mrvanx.org/.
I would like to downgrade my wm6.1 to wm5 or wm6 (official roms T-mobile NL).
Thanks for your help
Since the guide to downgrade is still offline, I don't know how to handle.
I have searched the forums, but everyone keeps on linking to this guide of mrvanx.
I found this thread where mrvanx provides
this link to download SPL 1.10.oli. Since I understand I will first have to flash to 1.10 olipro before flashing the factory default SPL.
After I have used this I keep on getting ERROR [260] : UPDATE ERROR
Can anyone please tell me how I should downgrade my Device?
I have WM 6.1
Radio version: 1.54.07.00
And still 2.10 olipro
thx
I stuck there now.
No guide for downgrading to WM5,
My phone is dopod 838pro, and SPL now is 2.10 olipro
Anyone can tell me where to get it?
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
yes, you can
o0opaniko0o said:
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
Click to expand...
Click to collapse
hi, yes, you can flash a new rom, but first of all, read , read, read and then read again, the process is very simple once you have readed the faqs (stickies)
good luck !!!1
Thanx for your answer!
I´ve read the Wiki and the sticky´s in this forum, i´ve searcht for my IPL/SPL Build and read this topics too.
But i´m unsure.
In the past (when the Wizard was new for me) i´ve read that the IPL/SPL 3.08.0001 (AKU3) wasn´t possible to upgrade .
Now i can´t find anything about that but i´m unsure.
Then i´ve read about Soft an HardSPL Flash but what is the best for me?
I´ve read that SoftSPL was better if you have warranty on your phone but my phone havent any warranty because it´s to old.
Should i use HardSPL to permanently remove the CID lock (then i should use only G4Save Rom´s - Right?)?
So Steps i want to do now to upgrade my Wizard :
1 . G4 Hard SPl CID unlock
[Solution] G4 Hard SPL (CID unlock)
But this tutorial say´s (After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip) can the IPL 2.21.0001 boot the "old" AKU3 T-Mobile Germany Rom or must i update the rom with Mun's RUU imediatly?
2. I Update the rom with Mun's RUU after i´ve read this ROM Features, Ratings, Information and Program List topic to chose the best rom for me, G4 Safe only!?
Right or have i forgot some steps?
It´s done,
i´ve read some topics again and again und then i used the SoftSPL CID unlock and flash my wizard succesfull.
Thanx!