help, I accidentally formatted my sd card. After rebooting, I always get the message that the sd card is blank or has an unsupported file system. I have tried different ways of formatting (ext4, ext3, fat32, fat32+ ext3) but no success so far.
Anyone has a solution? I am using modaco 2.8
D
With Astro or similar first back up your applications,secondly go back to recovery and go to bottom to mount sd card so that you can copy backups folder to your pc.
Now reformatt and make partitions and remount sd card to copy modaco's rom and choose zip to update. I dont think there is easy way round.
So you are saying the only way to fix this is by reflashing?
BTW, if I have to flash anyways, do I need to setup a fat32 partition or can I format the entire card as ext4 (i don't use windows on my pc)
Without flash your applications may not work correctly but you can try.
I think just ext4 will not be enough because how are you going to transfer files and folder which needs fat32?
Your current ROM will have automatically put files in your sd card which got destroyed by accidental format.
Related
I am trying to create an sd-ext partiton so I can move applications and backup to that partition on my 4GB external SD card.
I've got ROM Manager 4.8.0.8 but when I select Partiton SD card it reboots and tries to reformat but I don't see anything on the Card just a LOST.DIR folder. I can't read the system messages when in Recovery mode cos it all happens so fast.
I tried via ADB and booted into recovery and selected the option to partition manually but still nothing. I reformatted the card with FAT32. Nothing.
Am I doing something wrong?
Just throwing something out there. Try rebooting into Clockwork Recovery. In CWR, go to Advanced -> Partition SD Card -> Select the size. If it doesn't work, it shouldn't reboot your device (If I remember correctly). Take a look at the log (Advanced -> Show log).
Hopefully this helps a bit.
Hmmm he's right,you have to flash cwm first.
If your device is not listed in rom manager,find cwm for your device on xda and connect your device to the pc in fastboot mode,extract the zip and copy recovery.zip to the folder where fastboot on your pc is and give the command:
fastboot flash recovery recovery.img
after flashing cwm,do as suggested
Also,you can partition it by downloading Easeus partition manager on your pc and choose the ext2 partition as the second one and a size of 512 mb is enough in most cases
go into CWM and select advanced thn move onto partition SD card
it would ask u how much space to partition after that select swap size as 642 or above and wait for few minutes.... remember tot ake a backup of ur SD card as all the data would be cleared while partitioning
Thanks. The first problem was that the latest version of ClockworkMod Recovery 4.2 doesn't see my external SD card. No idea why. I used the 3.2 version which does see the external card and formatted the card first (after backing up!!). Then Advanced Partition SD card but I get a message saying : "Too many people have bricked their devices by doing this. Therefore this feature has been disabled."
I tried another Recovery Manager - Rogue Recovery and that showed messages saying it was formatting. I rebooted but when I looked at the SD card - nothing. However, I downloaded Easeus partition manager (looks good) and it showed that there is an sd-ext with a lost+found folder in it.
Is that normal? If yes then why didn't someone say that it would be invisible?!! If not, what happened?
Seems there are problems with the SD card. When I try to point TitaniumBackup to my SD card it sees the folders as Read Only. http://code.google.com/p/android/issues/detail?id=18559 and http://code.google.com/p/android/issues/detail?id=18501. It was obviously a bit silly to call internal storage the same name as an external SD card. HD as in hard drive (I know its not) would be better. Or just Storage or whatever. NO doubt people have been accidentally formatting their internal memory instead of the card and that's why it was disabled in Clockwork Recovery. And by the way I'm using the hacked Android 4 - so the problem is still there even in 4 (Ice Cream)
The easiest way to get sd card partitioned is using Mini Partition Tool on PC.
Dikirim dari WT19i gue pake xda premium
Now does cwm also do the ext partition? and if not what program would work well I have a 2gb sd card for my samsung admire and I want to make a ext partition so i can move some more files to it.And later get larger card up to 16gb and do the same.
Thanks,
Doug
Hi. Noob Android user here
So. I turned on usb storage and formatted the sd card from windows. I copied some files onto it and after i turned off usb storage it said "SD card is safe to remove" and i don't seem to be able to mount it back.
Thank you.
BobbyLoblaw said:
Hi. Noob Android user here
So. I turned on usb storage and formatted the sd card from windows. I copied some files onto it and after i turned off usb storage it said "SD card is safe to remove" and i don't seem to be able to mount it back.
Thank you.
Click to expand...
Click to collapse
try to format it thru phone
Tried that a couple of time and it didn't work. After a couple of reboots it worked now. Thanks.
Still got a question though.
What are the correct settings for formatting the sd card from windows?
Is it necessary to partition it from CWM? What are the correct setting for this?
LE: Ok. I got myself deeper in trouble. I managed to format the sd card from CWM. I mounted the sd card and copied update-cm-7.2.0-RC1-p500-signed.zip over. I wiped the phone's memory and tried to install CM7 and got the following error: "E: Can't open /sdcard/update-cm-7.2.0-RC1-p500-signed.zip (bad)". I also tried with update-oxygen-2.3.2-LGP500-KANG-signed_v2.6.zip but doesn't work either.
I was thinking of trying to partition the sd card from CWM but i'm afraid i will make it unable to mount back again and this time i got no android to format it from.
Also it seems that formatting the sd card from cwm doesn't really work. The files are still there though it says that it completed.
LE2: I managed to mount sd card from cwm and copied over a cwm backup folder i had in my computer. Takes a while to copy it like it really does something. But after i try to restore or remount usb storage the files aren't there anymore.
can you tell me why do you want to patition your sd card? do you want to create second partition (sd-ext) or what?
BobbyLoblaw said:
Tried that a couple of time and it didn't work. After a couple of reboots it worked now. Thanks.
Still got a question though.
What are the correct settings for formatting the sd card from windows?
Is it necessary to partition it from CWM? What are the correct setting for this?
LE: Ok. I got myself deeper in trouble. I managed to format the sd card from CWM. I mounted the sd card and copied update-cm-7.2.0-RC1-p500-signed.zip over. I wiped the phone's memory and tried to install CM7 and got the following error: "E: Can't open /sdcard/update-cm-7.2.0-RC1-p500-signed.zip (bad)". I also tried with update-oxygen-2.3.2-LGP500-KANG-signed_v2.6.zip but doesn't work either.
I was thinking of trying to partition the sd card from CWM but i'm afraid i will make it unable to mount back again and this time i got no android to format it from.
Also it seems that formatting the sd card from cwm doesn't really work. The files are still there though it says that it completed.
LE2: I managed to mount sd card from cwm and copied over a cwm backup folder i had in my computer. Takes a while to copy it like it really does something. But after i try to restore or remount usb storage the files aren't there anymore.
Click to expand...
Click to collapse
Just format your SDCARD from SETTINGS - STORAGE, after that proceed with the instalation of CM7 or whatever you want. Don't partition your SDCARD if you don't know how to do that and if you don't need partitioned SDCARD. It is not necessary to do that if you don't use an APPS2SD app, so don't waste your time with that.
I just partitioned my MicroSD card with MiniTool.
First Partition: FAT
Second Partition: Ext2
My laptop recognizes the card through card reader and I can see the two partitions in MiniTool, but my phone (HTC Explorer) does not recognize it. Any suggestions?
Unless you have flashed a custom kernel (or a custom ROM containing one, e.g. JaggyRom), you can only use FAT32 partitions.
But your phone won't "recognize" the second partition as such, it'll only be seen by certain apps and scripts (e.g. apps2SD scripts/apps, such as Link2SD).
Or did you mean the phone won't recognize the card at all? If so, that seems strange. Make sure the first partition is the FAT one, and it is a "primary" partition. Also try rebooting the phone while the card is inserted.
u need a custom rom...the device doesnt recognize use titanium backup it will show all partitions in startup screen...flash any custom rom.......
I've been having no trouble with flashing roms from my external sd card. I'm looking to completely wipe my phone (internal and external sd cards) to get a fresh install. I formatted my external sd card (via the phone). I then connected it to my PC, copied over my rom and a wipe tool no problem. My phone reads the SD card fine when it's booted up, can see the rom i've copied over.
When I re-boot into recovery mode with CWM-based Recovery (v6.0.1.4 - siyah), it says "E:can't mount/external_sd/" when I try to find my rom to flash.
I'm wondering if the problem is the siyah thing, it's not the kernal i'm using, if was installed on my phone with a rom I no longer use. That said, it wasn't an issue before I formatted my external SD card.
I've just updated CWM to ClockworkMod Touch 6.0.3.2 which has got rid of the Siyah version. I've also formatted the SD card again as i've read that formatting via the phone changes the file format to something cwm doesn't like. I did it via PC, it's formatted at exfat. Still made no difference, CWM won't read it.
Might be a silly question but did you go into "mounts and storage" I. Cwm and check the external sd card is mounted?
Sent from my GT-I9300 using Tapatalk 2
I have tried that. It didn't work, it would give the same error. I have managed to get it to be read in CWM, I downloaded the ROM manager tool, used that to put a partition on the SD card. Then I was able to format the card via CWM. I've not had a chance to put my ROM back on the SD card and retry. One thing is, when I booted up the phone after formatting the card in CWM, the phone shows it as blank or has an unsupported file system, saying it needs to be formatted. I wonder why there is a conflict?
I needed to format the sd card on my pc, it needed to be fat32. All sorted now
Escy said:
I needed to format the sd card on my pc, it needed to be fat32. All sorted now
Click to expand...
Click to collapse
If you really want exFAT, try Philz recovery linked in my signature. It is CWM but with loads of great extra features (including exFAT support).
I actually thought that exFAT support meant it can format in exFAT. I find it odd that exFAT is the native format that Samsung uses but CWM doesn't support it.
Personally I use FAT32 myself as my main computer is Linux and exFAT is too microsofty for it to recognise.
I've installed that and re-formatted my SD card into whatever Samsung uses (think it's exfat) as fat32 was making windows explorer slow and crash prone
sup guys am having a problem with my samsung galaxy s3,via E:can't something related to mount format.............i mount for mated ,anyone who know how i can fix it?
Still looking for some insight and/or answers on this one...please help if u can!! Thanks!!
Phone details:
Metro PCS LGMS769
Android v 4.1.2
ROM LGMS769e (stock)
I have finally partitioned my SD card (16GB) successfully using MiniTool Partition Wizard tool. I created two FAT 32 partions (G=11.75GB DATA and *.=2.87 APPS). I had problems when creating an EXT2 partition...Link2SD wouldn't recognize it or mount the card.
Was able to successfully mount the card after creating 2 FAT32 partitions so I went with that for now. Several questions though...
1) I was unable to actually move to SDcard using "native App2SD method" with an error telling me that App2SD not supported by my device because it has a primary external storage which is emulated from the internal storage. Instead had to link the app in order to move its files to the card. What does this mean and why can't I physically move? Also, what is actually happening when I create links?
2) Apps appeared to be on the external card afterward when I went to System/storage and reviewed space usage. I could not, however tell whether they were on the DATA or the APPS partition from File Manager OR after taking the card out and looking at it from my PC. There were a couple of l directories created (LGBackup and LOST.DIR) but all appeared to be empty. WHY?
3) After dismounting and taking the card out to explore on PC and then putting card back in the phone it was remounted automatically however all apps are now taking up space on my internal drive and external storage is completely. Also, all my home screen widget configs are empty with all listed under "APPS" utility. Can anyone explain what's going on and how to correct?
THANKS!!
Q: about how you recoverd sd partition from EXT2 to fat32
jakman50 said:
Phone details:
Metro PCS LGMS769
Android v 4.1.2
ROM LGMS769e (stock)
I have finally partitioned my SD card (16GB) successfully using MiniTool Partition Wizard tool. I created two FAT 32 partions (G=11.75GB DATA and *.=2.87 APPS). I had problems when creating an EXT2 partition...Link2SD wouldn't recognize it or mount the card.
Was able to successfully mount the card after creating 2 FAT32 partitions so I went with that for now. Several questions though...
1) I was unable to actually move to SDcard using "native App2SD method" with an error telling me that App2SD not supported by my device because it has a primary external storage which is emulated from the internal storage. Instead had to link the app in order to move its files to the card. What does this mean and why can't I physically move? Also, what is actually happening when I create links?
2) Apps appeared to be on the external card afterward when I went to System/storage and reviewed space usage. I could not, however tell whether they were on the DATA or the APPS partition from File Manager OR after taking the card out and looking at it from my PC. There were a couple of l directories created (LGBackup and LOST.DIR) but all appeared to be empty. WHY?
3) After dismounting and taking the card out to explore on PC and then putting card back in the phone it was remounted automatically however all apps are now taking up space on my internal drive and external storage is completely. Also, all my home screen widget configs are empty with all listed under "APPS" utility. Can anyone explain what's going on and how to correct?
THANKS!!
Click to expand...
Click to collapse
HI: I tried to partition a 32GB card an used EXT4 using the free Minitool Partition wizard. Now my Freelander Tab won't mount my card nor will
Windows-7 Pro allow me to copy my backup data to the card. I tried to re-partition but minitool doesn't recognize the partition. I tried the partition recovery mode but got no where now I have a bricked 32BG SD card. How do I recover my 32GB SD card?? I had no data on it as I backed up all of it to my Computer before I started. HELP PLEASE Dan Mericle Sr
SD Partitioning issues with MiniTool Wizard
danvidman said:
HI: I tried to partition a 32GB card an used EXT4 using the free Minitool Partition wizard. Now my Freelander Tab won't mount my card nor will
Windows-7 Pro allow me to copy my backup data to the card. I tried to re-partition but minitool doesn't recognize the partition. I tried the partition recovery mode but got no where now I have a bricked 32BG SD card. How do I recover my 32GB SD card?? I had no data on it as I backed up all of it to my Computer before I started. HELP PLEASE Dan Mericle Sr
Click to expand...
Click to collapse
Dan,
I don't think Windows would recognize a Linux partition...which is what EXT is. That's why u can't move data to that partition at this time. MiniTool doesn't even SEE your EXT partition?? If that's the case how do u know it's an EXT partition in the first place? Perhaps u could post an image of the MiniTool screen? If it CAN see the partition I would delete it and recreate it with at least a portion being FAT32.
Answer to Jakman50 Questions
jakman50 said:
Dan,
I don't think Windows would recognize a Linux partition...which is what EXT is. That's why u can't move data to that partition at this time. MiniTool doesn't even SEE your EXT partition?? If that's the case how do u know it's an EXT partition in the first place? Perhaps u could post an image of the MiniTool screen? If it CAN see the partition I would delete it and recreate it with at least a portion being FAT32.
Click to expand...
Click to collapse
jakman: Because when I Partitioned my 32GB SD Card I was reading a XDA thread that said to Partition it using Ext4 as being the best Partition to use. When I look at Minitool it shows the Partitions that says Disk 8 read only ( Capacity 5.00GB for 1st partition and 24.72FGB for 2nd partition, used GB's then under File System Ext4 for both partitions, Type Primary both partitions, Status None. ). When I Hi-Light partition-1 it comes up on the left side with Actions and Wizards. Under Wizards the Choices are Copy Partition Wizard, Copy Disk Wizard, Partition Recovery Wizard. No other Choices the task bar at the top is grayed out. When I Hi-Light one of the other drives it adds a whole bunch of choices like Format Partition - Show Partition Properties and other actions that I can take Etc. I tried Partition Recovery Wizard it just tells me what files that can be recoverd. the Delete Icon is Missing. So there is no way i can delete the partitions and choose FAT 16/32 File System. When I first Partitioned the card Ext2, Ext3, Ext4, Fat 16, & Fat 32 were the File Systems offered. So do you Know of another Partition App that might enable me to Delete the partition and set the File System to Fat 32 thats FREE or doesn't Cost to Much as I'm on a fixed Income. Ive search the Forums but no body seems to have had this problem in the past or they found a solution else where and didn't post there Solution. Thanks I hope maybe you or some on else might know of a solution and help me as I don't want to have to buy another 32GB SD Card. Dan Mericle Sr danvidman
can you use minitool partition wizard to recovery your 32gb card? You can use the function Recovery Partition to scan card. have you set the partition to primary after change its files system? maybe this is main reason why it cant be recognized.