hi all
i can't upgrade my radio any help plz i had found thread but i can't do it in right way
Your device must CID Unlocked. You can do this with HardSPL, USPL or SSPL
Rataplan said:
Your device must CID Unlocked. You can do this with HardSPL, USPL or SSPL
Click to expand...
Click to collapse
i had installed sspl & hardspl but when i try to install any radio it freez at 99%
my radio is 1.58.21.23 wm 6.1 what can i do
Flash the last official rom:
http://rapidshare.de/files/41219609..._Radio_NikeMR_1.65.29.22_signed_Ship.exe.html
sorry for late , i works with me now i had wm6.5 on my mobile and all function work , thank u
sorry for late , i works with me now i had wm6.5 on my mobile and all function work , thank u
Related
I read in wiki "Bootloader 1.06 and 1.09 do not have 'rtask' command, this means: you will not be able to do radio upgrade only on your Hermes, you will stay always with the Radio version contained on the ROM you flash"
Does that mean that my Tytn i can upgrade just all completed ROM?
I try to install just radio rom, i have error 114.
May i install a "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10 _108 _Test.exe" ??? in my Tytn?
My IPL is 1.00 and SPL 1.06
Thnks.
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Don't flash the entire new roms or you will be losing the ability to change your radio roms.
nugift said:
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Click to expand...
Click to collapse
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
dodadent said:
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
Click to expand...
Click to collapse
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
nugift said:
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
Click to expand...
Click to collapse
Thnks man, a lot.
Everything is going OK.
Thnk you very much again.
hi everyone
i have imate k-jam. could i download rom 6.5 from this site.is it g3 or g4.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
k-jam is a WIZARD, go to WIZARD rom development section. also for any type of queries, post ur queries in wizard rom development section.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
how can i upgrade to 6.5 please help me
ultramag69 said:
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
Click to expand...
Click to collapse
what is brick how can i get it
rockonhell said:
what is brick how can i get it
Click to expand...
Click to collapse
A brick=paperweight
just flash something that doesn't belong on the hermes (like wrong radio, or rom built for different device), and POOF! you have yourself a nice fancy brick!
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!
Hi,
Is it always necessary to cid unlock a device (G4) for WM6 flashing?
Because I read that there is currently no way doing this for free... or?
Thanks.
Megabug said:
Hi,
Is it always necessary to cid unlock a device (G4) for WM6 flashing?
Because I read that there is currently no way doing this for free... or?
Thanks.
Click to expand...
Click to collapse
Read the wiki at first. You don´t have to unlock for flashing, but to downgrade your prophet to a special version. Then you can flash some of the versions you prefer.
Schaeferreiner said:
Read the wiki at first. You don´t have to unlock for flashing, but to downgrade your prophet to a special version. Then you can flash some of the versions you prefer.
Click to expand...
Click to collapse
CID lock has nothing to do with the OS. you can upgrade/downgrade your OS with CID lock phone. on the other hand you can not dowgrade your IPL/SPL if your phone is CID lock. ( don't change IPL/SPL if you don't know what they are)
Yes, before I can upgrade to WM6 it should be AKU2.2 ... Which software version is it when I look at device information?
so, if i have a g4 model with wm5, can i upgrade with the PDAViet 4.0.0.0.6 Touch? i've been reading wiki, but... there are always some kind of a fear to do the things for the first time...
thank's wiki's masters!
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
skunknet said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
JumpSPL only works once, you have to run it prior to every Rom uopgrade you want to do.
The "New WM6 Upgrade Guide" is based on an other method, namely HardSPL instead of JumpSPL. The advantage is that HardSPL stays resident (until you flash another SPL) so you don't have to bother again with the SPL issue every time you want to flash.
So, if you are aquainted en comfortable with the way you did your first upgrade: Run JumpSPL first and the RUU afterwards, do it again with your new upgrade attempt. The result is the same, it's only one step more to execute.
Try~~
skunknet;1806937 said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
HERE:
http://forum.xda -developers.com /showthread.php?t=353547
enjoy ~~~
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
skunknet said:
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
Click to expand...
Click to collapse
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Sorry...
rondol1 said:
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Click to expand...
Click to collapse
Sorry for the broken link in the previous post
Please have a look here:-...
http://forum.xda-developers.com/showthread.php?t=353547
hope it helps~~ ^_^
Many thanx guys ...
i've upgrade successfully my G4 device to WM6 ....
I've upgrade to Prophet Touch VIII using jumpspl ....
Many thanx at all for information ....
OK, newb question. Not yet done a ROM update on a phone and wanna make sure im doing it right before cooking my phone.. Searched for a basic guide like this on forum as to how things work, and what is compatible, but couldnt find.
Touch Dual - NIKI100 ..
Old Radio i know.. RUU Nike Radio 1.58.16.27
ROM 1.31.710.11
ROM DATE 11/16/07
Protocol ver 25.61.30.03H
From what ive read on the forums, Im guessing ive gotta do the below.. Correct me if im wrong..
1. Phone has gotta be unlocked.. Using Niki SuperCID and Security Unlocker... How to tell if it is unlocked before i do this?
2. Nike SSPL, USPL and HardSPL .. Gotta run this on phone.. Or do i gotta do this before the unlock? .. And which one to use?
Following info on this link.. - http://forum.xda-developers.com/showthread.php?t=355730
3. Use this radio update when flashing.. RUU Nike Radio 1.58.16.27.. from this link? - http://forum.xda-developers.com/showthread.php?t=369502
- Im guessing you always have to use something compatible with the radio, therefore gotta use the right one, otherwise wont work?
4. Choose a ROM to add.. which is the best WM6.1 ROM to use?
- From what i can see, the ROM is slightly flexible, and customised to what someone needs, and isnt entirely hardware/model dependant?
beanmeister said:
OK, newb question. Not yet done a ROM update on a phone and wanna make sure im doing it right before cooking my phone.
1. Phone has gotta be unlocked.. Using Niki SuperCID and Security Unlocker... How to tell if it is unlocked before i do this?
Click to expand...
Click to collapse
Correct. Slip another company's SIM chip in. If it is unlock, it will work.
2. Nike SSPL, USPL and HardSPL .. Gotta run this on phone.. Or do i gotta do this before the unlock? .. And which one to use?
Click to expand...
Click to collapse
Unlock phone first before this.
SSPL first. That prepares the phone to accept another bootloader (either USPL or HardSPL). HardSPL just means it is write protected.
3. Use this radio update when flashing.. RUU Nike Radio 1.58.16.27.. from this link?
4. Choose a ROM to add.. which is the best WM6.1 ROM to use?
Click to expand...
Click to collapse
3 & 4 is dependent on ROM chosen. The author will advise you of which radio is needed for their ROM in their thread.
If you intend to flash HTC WM6.1 ROM, then the radio and SPL is also included in the flash. You can skip 2 above in this case. This ROM also needs SPL 1.22 or HardSPL 1.22 to work. If you have HardSPL 1.15 or HardSPL 1.16, then flashing this ROM will cause radio problems (phone or camera not working or both) until you update the SPL to 1.22