Today,
I use to connect Hero to my PC as everyday
but
Windows(Vista) show that "USB Device not recognize"...
I don't know why
I wondered that i never use "Safety Remove" as Flash Drive
I try...
Turn off USB Debugging
Uninstall ADB driver
Uninstall HTC Sync
Restart Hero and PC
Remove old Registry(cuz new problem)
First thing that i notice is after i modifed htc sync again i can use adb shell as usually
but i see some suggestion that i need to remove old registry of driver but for is like a "W*F with my USB"
I connect my hero again
Windows show "Composite Device => Failed to install driver" and "Unknow device is connected"
I don't know how to solve this problem.
I also try this on my Windows XP(same PC)
I need everyone help
Thank you
ouuu i know that problem...i have the same.....but i can`t find anywhere the answer.....can anybody help????
gahomaster said:
Today,
I use to connect Hero to my PC as everyday
but
Windows(Vista) show that "USB Device not recognize"...
I don't know why
I wondered that i never use "Safety Remove" as Flash Drive
I try...
Turn off USB Debugging
Uninstall ADB driver
Uninstall HTC Sync
Restart Hero and PC
Remove old Registry(cuz new problem)
First thing that i notice is after i modifed htc sync again i can use adb shell as usually
but i see some suggestion that i need to remove old registry of driver but for is like a "W*F with my USB"
I connect my hero again
Windows show "Composite Device => Failed to install driver" and "Unknow device is connected"
I don't know how to solve this problem.
I also try this on my Windows XP(same PC)
I need everyone help
Thank you
Click to expand...
Click to collapse
try system backup / system restore and remove your usb drivers then update/reinstall them , then try your hero again
Related
Hi,
Each times i use adb command to root my Hero, my computer (under Windows XP SP3) lose its connection with HTC Sync
and to recore it, i have to uninstall the HTC Driver (under windows Device Manager), then reboot my computer and then plug my HTC which is finally reconized by HTC Sync
Is there a way to use both adb and sync without having this problem??
Thanks.
Hi, I am looking for usb driver for viewpad 7 for using adb. Can anybody provide and link or pointers from where can I get the same.
Thanks,
Dang
There's no "real" driver...
Just connect your Viewpad 7 to your PC.
A window pops up where you can select "setup.exe" - select it.
Then a few drivers get installed (perhaps a restart is necessary)
Seems like the Viewpad 7 has a virtual drive which gets mounted when connecting it to a PC - it's shown up as virtual CD-drive for me under Windows XP and Windows 7.
PS: The drivers are also located on the virtual CD-drive in a directory.
Make sure you run the file from the virtual optical drive if you have autorun disabled.
Sent from my HTC Sensation Z710e using XDA App
plug youre viewpad in now youre pc see een cdrom right click and open use that adb.exe that one works
How to remove the virtual drive
I have already installed the drivers from this drive, but whenever I connect the device, the virtual CD-ROM drive still appears. Anyone know how to get rid of it?
LEGEND383 said:
I have already installed the drivers from this drive, but whenever I connect the device, the virtual CD-ROM drive still appears. Anyone know how to get rid of it?
Click to expand...
Click to collapse
I always open the Sync tool then (do nothing, no sync or so).
That's the only way my Windows 7 PC recognizes the tablet via ADB.
I have been doing that as well, but it's just annoying to have this extra drive that is of no use and just sits there taking up a drive letter.
Stupid question, ive never used adb, but does this mean i dont have to download it because already cames on that virtual drive, and so i only need to install it ?
Now i manage to install the drivers.
I go to the command line in windows and write :
adb usb
adb devices, and get this:
List of devices attached
FM6120420141
Then i do,
adb shell, and nothing happens.
Ive tried several commands and nothing works, what m i doing wrong here ?
Hi guys, i tried another pc with windows xp and everything worked perfect at first try. Thans for the help VPAD7, nice chating.
Bye all the other losers.
Hi VPAD7
Can you share the solution for "adb devices" not working on windows7? I am facing he same problem with my Viewpad7.
Thanks for your contribution to the forum.
---------- Post added at 12:45 AM ---------- Previous post was at 12:39 AM ----------
VPAD7 said:
Now i manage to install the drivers.
Could you share how did you manage to get drivers installed on windows7? I am also seeing same issue with viewpad7. I am trying to root it.
Click to expand...
Click to collapse
Solved driver issue on windows7
Hi,
I was facing issue in connecting viewpad7 to windows7 machine. Even synchronization steps were failing. Manuall attempt to run "adb.exe devices" were unable to detect the device. Here is my steps that I did for rooting the device with SuperOnceClick(SOC)1.7-
1. Initially driver were not detected/installed on windows7. Only CDROM displaying setup was displayed and clicking "Setup.exe" is not installing drivers. Copy the All files on computer and say folder name is "v7Setup".
2. To Install drivers, Connect Tablet/Phone to windows7, select "USB Tethering in tablet" (This is needed to detect devices by Windows7), in windows7:check the "Device Manager", it can show "Others" two devices: HSUSB & RNDIS. Update the driver for both devices from "v7setup/RUT/*" folders.
3. Now start SOC1.7 and select "rageagainstthecage" and click root. It may wait at "Running rageagainstthecage..." message in SOC log window. Then disconnect the Tablet after waiting for 1-2 minute and connect again after beep sound from windows7. Here, again I needed to install the drivers as mentioned in step2. SOC1.7 will proceed and finally in poup message, it will ask to "push su" files. And Done.
I'm having issues with my laptop detecting attached adb devices (Thunderbolt specifically). I can get my main computer to recognize/detect an adb device. I will then disconnect my phone from my main computer and plug it into my labtop, and yet my laptop will not recognized there's an adb device attached. Regardless of the following, i still can not get it to work on my laptop: Closing CDM, disconnecting the phone from the computer, plugin the phone back then pull up cmd (or pull up cmd and then plug in phone -ive tried every common sense trick there is).
Whats going on with my laptop that will not allow it/android sdk to recognize the device? How do I fix this?
PS in case it needs to be mentioned, yes i have USB Debugging selected (thats why i am able to get the one computer to recognize it).
never mind i'm an idiot, since i manually add the script in for the USB drivers i forgot to select where to pull the drivers from in device manager. Sorry about this post, please delete it.
Hi
Wondering how to set my new z5 in ptp mode, so i can use helium to transfer my userdata from games to new phone.
Im looking for that answer too, just bought z5c.
Hi, I just did a Helium Backup yesterday, you don't actually need the ptp connection. Go into the device manager and right click on "ADB device" (it has a yellow triangle icon on it) and reinstall driver from your pc, choosing "ADB interface". Then disconnect the device from the computer, close helium on the computer and reopen, then reconnect. The connection will establish. That was my experience, YMMV but fiddling a bit can help. I hope you succeed
The steps I did to enable PTP mode so I can use adb:
- plug the phone into the PC USD and install normal drivers
- install Helium backup app on the phone. Run Enable PTP from Helium. It will not work, but will pop an ADB unknown driver in your computers Device Manager
- Download Sony ADB drivers: http://developer.sonymobile.com/downloads/drivers/xperia-z5-compact-e5803-and-e5823-driver/ and then unzip
- in device manager, right click on ADB Device, Select update driver, select Search Location and point to the drivers unzipped in the step above. Make sure you include Search Subfolders. The driver will be detected and you can install it.
- In helium app, enable PTP
After this I could use ADB!
After doing this, my phone rebooted and then could not be seen by Windows. So there are no recognizable drivers for windows? Sony PC Companion re-install did not reinstate the drivers.
Anyone know how to fix?
Is there any way to access the internal storage through USB without using Huawei's HiSuite program?
I would expect standard mtp or ptp to work, but when I select those options, the only drive that shows up is the HiSuite install "cd".
Thanks in advance!
have you enabled USB debugging on your phone?
If not enable please enable it and try again
I've enabled debugging, but that doesn't change anything.
Surely I should be able to use MTP without needing to enable debugging?
ofcorse, its standart for every phone, but sometimes user dont instal drivers, so we see device, but not storage.
what pc version, mac you use?
on windows, copmuter, right click, device manager, connect phone with pc, there need to be yellow alert simbol, pres on it, instal drivers etc, ofcorse, if you instal hisuite, you shuldnt be problems to connect phone without instaling drivers, because hisuite install all needet things, but who knows, maybe for tohers not working things liek for me
Make sure the drivers are correctly installed for your phone.
In my case, an antivirus software update was causing the MTP driver to malfunction. The yellow caution icon was activated when I went to the 'Connect Phone with PC' tab in the Device Manager (Windows Explorer / This PC + right click / Manage). I opened the antivirus program and it asked me to restart the PC, which I did. After restarting the PC, I connected my phone and I was able to see it as a removable device (a.k.a. external device, a.k.a USB device) and transfer files through Windows Explorer as usual. So, basically, make sure all the Windows Updates and antivirus updates are 'updated'. Best of luck.