hi friends
i have htc p3400 old.it was working good.i flashed it many times with different roms.by mistake one day i hspl it with oref.oref was only for new gene.and unfortunately it was bricked.did not power on.only tricolour screen appears in bootloader mode showing spl oref instead of olip.plzzzzzzz help what to do know
thx to all members
how is your mobile now.,. I too did the same mistake.,. Mine htc p3400 is also dead.,. Did you got any solution for that.,. this is my mail id [email protected] please send your reply to that id.,. please dont mind.,. thank you.,.
try this
have u ever used mtty software......
use mtty software to recover ur hspl..........search with "gene_unbricker"
here is link"http://forum.xda-developers.com/attachment.php?attachmentid=70167&d=1202801854"
i have downloaded it.,. what is the next step.,.
nithin_bablu said:
i have downloaded it.,. what is the next step.,.
Click to expand...
Click to collapse
1. Unpack all in some folder.
2. Press and HOLD "Camera" button and turn on device.
3. If you see 3-colored screen, release "Camera" button, else try again.
4. Kill ActiveSync on computer - Press Ctrl+Shift+Esc, found "wcescomm.exe"
process and terminate it.
5. Connect USB-cable to device.
(In the left bottom corner of the screen to appear the text "USB")
6. Run mtty1_42.exe programm, and press button "USB".
7. In the opened window type the text:
set 32 1
Press Enter. (You must type this text by hand, not copy/paste)
8. After you will see answer from device in window.
9. Type in window that text:
ls boot.bin (for "ls"----this is small L,mot capital i)
Press and HOLD "Camera" button, and press Enter.
10. After a while the device screen becomes white.
Wait 2-3 second, and release "Camera" button.
11. Close mtty programm.
12.there r 2 folders,"for old gene" & "for new gene"---u have old gene,so copy that .nbh file in gene_unbriker folder.
13. Run RomUpdateUtility.exe programm and follow her instruction.
14.after that install Operating System u like......
reply me with ur gene working OKKKKKKK
i tried but nothing happened dude.,.
tell me exactly about spl......u have old gene na....?tell me exactly what u did......?
yes mine is old gene and i tried new gene (0ref) method to upgrade.,.
then i think u have only 2 options.......
1--if u have warrenty,go to nearest R T Outsourcing
2--try gene h-jtag method...
will u explain me what is that h-jtag method.,.
1. Remove the battery, SIM card and SD Card of your phone and press the Power key for 20 seconds to draw out any residual power from the phone.
2. Replace the battery but not the SIM and SD card, and don't start the phone yet. Press and hold the Camera button and then press the Power button or Soft Reset button. Phone will come to boot loader mode (tricolor screen) and SPL 1.10.Olip will be displayed.
3. Connect the USB cable. The text USB will appear on the bottom of the screen.
4. On PC, go to the folder Orefkov in the folder extracted in step 1 and run the Mtty1_42.exe. Press the button "USB" in the window that opened.
5. In the window that opened, type the following command (don't use copy paste please) and press enter:
Code:
set 32 1
You'll see a response from phone.
6. Type the following command BUT DON'T PRESS ENTER YET:
Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I.
Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
8. Now on the splash screen you'll see the info with updated SPL version. The version of SPL will be 1.07.Oref.
Congrats! you have successfully patched your SPL.
search the forum for h-jtag for htc....
plz read the 2nd page of this thread......
http://forum.xda-developers.com/show...=524267&page=2
i think definately it will solve ur problem......
Related
I need to upgrade the SPL on my SPV C550 now that I have unlocked it (trying to install WM6)
Do I have to buy a mini SD card reader or can I use tools to do this from my PC.
If so which tools please and briefly how.
Cheers
John
john72821 said:
I need to upgrade the SPL on my SPV C550 now that I have unlocked it (trying to install WM6)
Do I have to buy a mini SD card reader or can I use tools to do this from my PC.
If so which tools please and briefly how.
Cheers
John
Click to expand...
Click to collapse
Although a search would solve your problem here is a mini how to:
- you need to have ParchedRUU (this includes these files: EnterBootLoader.exe, Patched_RUU.exe, ROMUpdateUtility.exe, RUUGetInfo.exe and finaly your_bootloader_name.nbf) all in the same directory. The files are availabe on the net just google it.
- establish an activesync connection with USB, to do so have the phone in standby mode (no bootloader mode)
- when connected in activesync (green icon on taskbar) run the Patched_RUU.exe
- make sure you tick the boxes and the next button and that phone battery is greater than 50%
- in the final screen hit the update button, if the .nbf is in the same directory as the Patched_RUU it will load it automatically
- wait for 3 minutes, during this time you phone will enter bootloader mode, and a red bar will show the progress on the phone and the computer
you are all done
- mike
Cheers mate that did the job.
Next I guess I get into boot loader mode and then use mmty.exe?
Any clues please on how to get into boot loader mode.
john72821 said:
Cheers mate that did the job.
Next I guess I get into boot loader mode and then use mmty.exe?
Any clues please on how to get into boot loader mode.
Click to expand...
Click to collapse
again search m8!
anw here it goes:
- go to active sync -> settngs -> disable USB connections
- switch off your phone, and while holding the camera button connect it to the USB, on the screen it will appear "Need UI upgrade? (0)" or something like that.. bottom line is press 0
- then phone enters bootloader mode. if on the lower bar i think it is the green bar it says hurricane and on the right UI then it is all good, if it says something like XIP or something then you have to switch it off and do the proccess from the begining with the camera button REMEMBER TO PRESS THE 0
- fire up the mtty.exe, remember put mtty.exe AND the bin in the C:\ directory. The only thing you need to change in the startup screen of mtty is the connection port change from com1 or something to usb and press ok
- press enter so the Cmd> shows on the blank terminal
- write without quotes "l c:\name_of_your_rom.bin" and hit enter. l is a small L short for load
- hopefully it will do the update, wait for ~10 mins and it will say that it is all done... depending on your rom you may have to change language and so...
hope this helped
- mike
Sorry to carry on a bit but I get this when I do what you suggested.
Cmd>l C:\wm6.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Ive Googled this and im sure ive unlocked my phone - but is that the same as unlocking the super CID?
i dont remember man, are we allowed to post links to other sites? anw follow this guy's tutorial it is allmost the same
http://karhoe.byethost33.com/content/view/35/1/
- mike
help..
need to flash phone from boot loader mode..no standby mode..how do i do that???
HELP!!!!!!!!!!!
Just follow my guide in the signature, but use huricane ROM instead, you need to get into the bootloader and enable AS USB mode, then run the RUU
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
DEAD SPV
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
Where I can find the latest SPL for C550?
Since post March 2008 GENEs got new SPL and lots of people have bricked there GENEs using orefcovs HSPL and due to some other reasons.
We need to find some solution and I will consider donation towards person who find proper solution.
There will be more people who willing to make some donation towards the solution.
Clever developers like Olipro, Pof, Jockyw2001, PLEASE look on to this.
We will consider donation for your valuable time and skills.
NOTE:
PLEASE REED FROM POST 40 FOR UNBRICK METHOD BY OREFCOV
IMPORTENT
AFTER YOU APPLIED UNBRICKER SUCCESSFULLY, DON'T EVER FLASH ANY SHIPPED ROM PACKAGES
TO modo.
Please sticky this
I dont have bricked Gene for test.
Can you enter to bootloader on bricked Gene? (Press and hold Camera button and turn on device)
Can device connect to computer via mtty?
orefkov said:
I dont have bricked Gene for test.
Can you enter to bootloader on bricked Gene? (Press and hold Camera button and turn on device)
Can device connect to computer via mtty?
Click to expand...
Click to collapse
I can go in to bootloader and it shows
ONBL 1.10.0000
SPL 1.10.Olip
I couldn't communicate via MTTY
I have tried 'set 14 0' and 'set 16 0'
nothing happen
Do you know correct commands for GENE on MTTY
hey all, I'm willing to try and help. PM me with your MSN address, or (preferred) come on IRC to #xda-devs on irc.freenode.net
for IRC you can use
- either java: http://java.freenode.net/ (just change the channel name to #xda-devs and the nickname to your forumname or similar)
- or you can download an irc client from mirc.com and connect using that.
thx cmonex ...
Try it.
Copy geneimg.nbh on your SD-Card
Insert card in device, press and HOLD Camera button, and turn device on.
If you see white screen whith countdown in bottom left corner of screen, press Power button.
Wait.
After you will see "Succees. Press any key".
Press Power button, and soft-reset device.
any brothers tried ??
I had bricked mine .. i am scared now
Try itself, will not be worse.
1) card need to be in FAT16 or FAT32 ??
2) empty card or card with content also ok ??
Format SD-Card as FAT32.
Put GENEIMG.nbh on SD-CARD.
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown in left-bottom corner of screen is appear, press "Power" button. Flashing is begin. After you will see "Success. Press any key". Do soft-reset.
But if you see 3-color screen, then you mast do magic with your SD-Card.
See http://forum.xda-developers.com/showthread.php?t=371147
orefkov said:
Try it.
Copy geneimg.nbh on your SD-Card
Insert card in device, press and HOLD Camera button, and turn device on.
If you see white screen whith countdown in bottom left corner of screen, press Power button.
Wait.
After you will see "Succees. Press any key".
Press Power button, and soft-reset device.
Click to expand...
Click to collapse
Didn't work
laramiller said:
Didn't work
Click to expand...
Click to collapse
Write more in detail, that occurs.
There was a white screen with an "Reading SD-Card content"?
not working
There was a white screen with an "Reading SD-Card content"?
no .. nothing
Бля, WRITE MORE DETAIL.
How not working?
Flashing not begin ?
Or erron on flashing process ?
Or dont boot after flashing?
leofungwai said:
There was a white screen with an "Reading SD-Card content"?
no .. nothing
Click to expand...
Click to collapse
Simple go in bootloader?
3-color mode?
yes bootloader mode
i tried 3 different brand card ....same same ..
Brand not important, important size of card.
Try 128 or 256 MB card, format in FAT32.
Or see http://forum.xda-developers.com/showthread.php?t=371147
kingston 256M X
Toshiba 512M X
sandisk 128M & 256M X
the wm5storage issue tried .. X
Try:
Go in bootloader.
Connect device to computer via USB.
Rename geneimg.nbh to ruu_signed.nbh and flash throught RUU.
i just flashed my rom to natf 4.0 and it says this beta software has concluded, and there is a white screen stuck on my fuze and it wont do anything, it wont even connect to active sync so i can re flash it i need help big time, phone not working, i run a business,i have no other phone, what can i do.
Did u HardSPL before flashing ? If not do so. See here
http://forum.xda-developers.com/showthread.php?t=448008
If yes u do not need Activesync, u can flash a ROM (NOT THE HARDSPL) from the SD Card as well
See:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Taken from this, thread
http://forum.xda-developers.com/showthread.php?t=448008
Did u try a Hard reset, this is mentioned in Step 10, just in the above instruction.
And last, Why did u take the 4.0, the ROM is at 4.7 according to
http://forum.xda-developers.com/showthread.php?t=469450
here
NEED niki100 Original vodafone Rom SPA or (ESP)
I can't find nothing
The phone is CID locked and no ROM
Tried sd update and nothing
"NIKI100"
SPL-1.16.0000
CPLD-4
marius_fl20 said:
NEED niki100 Original vodafone Rom SPA or (ESP)
I can't find nothing
The phone is CID locked and no ROM
Tried sd update and nothing
"NIKI100"
SPL-1.16.0000
CPLD-4
Click to expand...
Click to collapse
I only have a dumped version of RUU_Nike_Vodafone_ESN_1.31.164.09_Ship.exe , I'm not sure it will help you but at least you can give it a try, you can download the rom HERE
Goodluck
nop... is not working is stuck in 0%
But thanks anyway for being so fast
I was already afraid of that, can you tell me how you lost your rom ?
Greetz,
well i got it from someone (a friend )
hi said: "I wiped out something from windows folder"
after that the phone start only with vodaphone logo and stuck there.
so i tried with MTTY commands and format all "TASK 2A"(this is after 4-5 days of searching ROM's and other stuf for NIKI100) I manage to save the radio version .etc.
R 1.58.16.27
G 25.61.30.03W
D 1.31
m 04
b 04
If you know something about MTTY commands i am happy to know.
Besides this http://forum.xda-developers.com/wiki/index.php?title=Trinity_BootLoader#HTC_Trinity_BootLoader
thanks again..(sory about my english i am from Romania)
marius_fl20 said:
well i got it from someone (a friend )
hi said: "I wiped out something from windows folder"
after that the phone start only with vodaphone logo and stuck there.
so i tried with MTTY commands and format all "TASK 2A"(this is after 4-5 days of searching ROM's and other stuf for NIKI100) I manage to save the radio version .etc.
R 1.58.16.27
G 25.61.30.03W
D 1.31
m 04
b 04
If you know something about MTTY commands i am happy to know.
Besides this http://forum.xda-developers.com/wiki/index.php?title=Trinity_BootLoader#HTC_Trinity_BootLoader
thanks again..(sory about my english i am from Romania)
Click to expand...
Click to collapse
You better started HERE instead of using MTTY, it's harder to recover than to brick, most of the time people brick their device by using the command task 2a.
For now there are 2 options.
1. Perform a hardreset :
To perform a hard reset on a device that is not responding to input or not booting to Windows, first remove the back cover of the device. Hold the "call" and "end call" keys on the front of the device and reset the device by sticking the stylus into the small hole to the left side of the USB port. The device will ask for confirmation. To confirm, press the "Enter" key on the keypad. On some devices you need to press the "Action" key instead of "Enter".
The device will reboot and be reset to factory settings.
2. Try Frankenkaiser, see this post.
Succes buddy
since I got your post i am working.
The problem is the commands are only for kaiser bootloader
and i am trying to get my phone in "dload" mode like here http://forum.xda-developers.com/archive/index.php/t-394584.html
but in MTTY doesn't accep command "setboot 1"
to write the security unlock commands
it my bee a chance with this "FrankenKaiser"
ouhhh !!!!
the command are not the same for niki100(or spl 1.16.0000)(at least not all of them)
this is why i formatted my device
i was trying commands and ...opppss....ther goes my ROM
and it didn't work HARD RESET in the fist place
marius_fl20 said:
since I got your post i am working.
The problem is the commands are only for kaiser bootloader
and i am trying to get my phone in "dload" mode like here http://forum.xda-developers.com/archive/index.php/t-394584.html
but in MTTY doesn't accep command "setboot 1"
to write the security unlock commands
it my bee a chance with this "FrankenKaiser"
ouhhh !!!!
the command are not the same for niki100(or spl 1.16.0000)(at least not all of them)
this is why i formatted my device
i was trying commands and ...opppss....ther goes my ROM
Click to expand...
Click to collapse
marius_fl20 said:
and it didn't work HARD RESET in the fist place
Click to expand...
Click to collapse
I think the biggest problem is that your device wasn't unlocked before you bricked it, can you tell me what your device is doing now are is it complete dead.
Regards,
1.normal start - it vibrate and then white screen and stop here.
2.boot loader mode - pressing camera button + pwr button, no problem here.
3.hard reset - pressing send(green) button + end(red) button + pwr button
(no problem)it enter ok (this operation will delete.....)
butt after i press action key (not enter) "restore complete press
SEND to restart"
After i press send it vibrate and then white screen
marius_fl20 said:
1.normal start - it vibrate and then white screen and stop here.
2.boot loader mode - pressing camera button + pwr button, no problem here.
3.hard reset - pressing send(green) button + end(red) button + pwr button
(no problem)it enter ok (this operation will delete.....)
butt after i press action key (not enter) "restore complete press
SEND to restart"
After i press send it vibrate and then white screen
Click to expand...
Click to collapse
Ok, your phone is doing more than mine, I also had a white screen and try to flash the original rom, that didn't work so I tried the wwe 2.16 version and it started flashing but stops at 69%, now I have an Upgrade ROM code error in my bootloader, the biggest problem with your phone is that you don't have an hardspl, now I'm reading this post.
I'll keep you informed when I found something.
Regards,
I don't understand the commands from "FrankenKaiser"
For example what shoukd i type in instead of "/dev/com1"
What is my pot No (usb)
What should i see in CMD window
And what is it with "Replug USB cable now!"
Thanks for not leaving alone!
It looks like they have it (the rom)
But i can not register.
Can you give it a try .
http://www.htcspain.com/roms-touch-dual-60/roms-oficiales-5085/
please!!!!
marius_fl20 said:
It looks like they have it (the rom)
But i can not register.
Can you give it a try .
http://www.htcspain.com/roms-touch-dual-60/roms-oficiales-5085/
please!!!!
Click to expand...
Click to collapse
Ok I'll gonna give it a try and keep you informed.
hi guys
i have Crony cn98 MID tablet (Chinese)
i deleted file bin from system folder by wrong
when i power up the tablet, restarting itself
what should i do to fix that problem
i have 2 tablets of this type
it means i can bring file bin
but how to put bin folder in the tablet?
i need help
no way to fix it ?
how to reinstall android os?
or install custom rom 4.0.3 from pc ?
for crony cn98
os : 4.0.3
kernel : 3.0.8+
no reply :crying:
I did some reading on your behalf, let's try to sort this out. Good news is you can't really brick A10 allwinner devices.
Ideally you would need the original firmware from the manufacturer (.img file) and flash it through livesuit. However, this firmware is no where to be found on their website, I would try to email the device maker to send you the firmware. The email is: [email protected]
1 . Acqure the firmware file from manufacturer
2. Download livesuit (http://www.mediafire.com/download.php?lawkcbqhbictar4).
Follow these Instructions to flash .img file through livesuite (I found them elsewhere):
3. Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe
4.Select the firmware
Click the cube to the far left to select the firmware .img file.
5. Turn off your tablet
6. Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.
7. Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
8. Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.
9. The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."
10. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
11. Congratulations! You have flashed the firmware.
If you are not able to acquire the original firmware from manufacturer, you can try to flash this one:
http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img (funbook pro m500, similar specs and running same processor)
thank u very very much
i do that all but this frimware is not compatible (it show me all thing black)
i still need frimware
i send email for [email protected] but no reply yet