hi guys
i have Crony cn98 MID tablet (Chinese)
i deleted file bin from system folder by wrong
when i power up the tablet, restarting itself
what should i do to fix that problem
i have 2 tablets of this type
it means i can bring file bin
but how to put bin folder in the tablet?
i need help
no way to fix it ?
how to reinstall android os?
or install custom rom 4.0.3 from pc ?
for crony cn98
os : 4.0.3
kernel : 3.0.8+
no reply :crying:
I did some reading on your behalf, let's try to sort this out. Good news is you can't really brick A10 allwinner devices.
Ideally you would need the original firmware from the manufacturer (.img file) and flash it through livesuit. However, this firmware is no where to be found on their website, I would try to email the device maker to send you the firmware. The email is: [email protected]
1 . Acqure the firmware file from manufacturer
2. Download livesuit (http://www.mediafire.com/download.php?lawkcbqhbictar4).
Follow these Instructions to flash .img file through livesuite (I found them elsewhere):
3. Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe
4.Select the firmware
Click the cube to the far left to select the firmware .img file.
5. Turn off your tablet
6. Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.
7. Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
8. Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.
9. The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."
10. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
11. Congratulations! You have flashed the firmware.
If you are not able to acquire the original firmware from manufacturer, you can try to flash this one:
http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img (funbook pro m500, similar specs and running same processor)
thank u very very much
i do that all but this frimware is not compatible (it show me all thing black)
i still need frimware
i send email for [email protected] but no reply yet
Related
hi friends
i have htc p3400 old.it was working good.i flashed it many times with different roms.by mistake one day i hspl it with oref.oref was only for new gene.and unfortunately it was bricked.did not power on.only tricolour screen appears in bootloader mode showing spl oref instead of olip.plzzzzzzz help what to do know
thx to all members
how is your mobile now.,. I too did the same mistake.,. Mine htc p3400 is also dead.,. Did you got any solution for that.,. this is my mail id [email protected] please send your reply to that id.,. please dont mind.,. thank you.,.
try this
have u ever used mtty software......
use mtty software to recover ur hspl..........search with "gene_unbricker"
here is link"http://forum.xda-developers.com/attachment.php?attachmentid=70167&d=1202801854"
i have downloaded it.,. what is the next step.,.
nithin_bablu said:
i have downloaded it.,. what is the next step.,.
Click to expand...
Click to collapse
1. Unpack all in some folder.
2. Press and HOLD "Camera" button and turn on device.
3. If you see 3-colored screen, release "Camera" button, else try again.
4. Kill ActiveSync on computer - Press Ctrl+Shift+Esc, found "wcescomm.exe"
process and terminate it.
5. Connect USB-cable to device.
(In the left bottom corner of the screen to appear the text "USB")
6. Run mtty1_42.exe programm, and press button "USB".
7. In the opened window type the text:
set 32 1
Press Enter. (You must type this text by hand, not copy/paste)
8. After you will see answer from device in window.
9. Type in window that text:
ls boot.bin (for "ls"----this is small L,mot capital i)
Press and HOLD "Camera" button, and press Enter.
10. After a while the device screen becomes white.
Wait 2-3 second, and release "Camera" button.
11. Close mtty programm.
12.there r 2 folders,"for old gene" & "for new gene"---u have old gene,so copy that .nbh file in gene_unbriker folder.
13. Run RomUpdateUtility.exe programm and follow her instruction.
14.after that install Operating System u like......
reply me with ur gene working OKKKKKKK
i tried but nothing happened dude.,.
tell me exactly about spl......u have old gene na....?tell me exactly what u did......?
yes mine is old gene and i tried new gene (0ref) method to upgrade.,.
then i think u have only 2 options.......
1--if u have warrenty,go to nearest R T Outsourcing
2--try gene h-jtag method...
will u explain me what is that h-jtag method.,.
1. Remove the battery, SIM card and SD Card of your phone and press the Power key for 20 seconds to draw out any residual power from the phone.
2. Replace the battery but not the SIM and SD card, and don't start the phone yet. Press and hold the Camera button and then press the Power button or Soft Reset button. Phone will come to boot loader mode (tricolor screen) and SPL 1.10.Olip will be displayed.
3. Connect the USB cable. The text USB will appear on the bottom of the screen.
4. On PC, go to the folder Orefkov in the folder extracted in step 1 and run the Mtty1_42.exe. Press the button "USB" in the window that opened.
5. In the window that opened, type the following command (don't use copy paste please) and press enter:
Code:
set 32 1
You'll see a response from phone.
6. Type the following command BUT DON'T PRESS ENTER YET:
Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I.
Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
8. Now on the splash screen you'll see the info with updated SPL version. The version of SPL will be 1.07.Oref.
Congrats! you have successfully patched your SPL.
search the forum for h-jtag for htc....
plz read the 2nd page of this thread......
http://forum.xda-developers.com/show...=524267&page=2
i think definately it will solve ur problem......
I download this stock rom from this thread http://forum.xda-developers.com/showthread.php?t=1651794&page=2
Plz guide me how i flash this rom on my Galaxy Tab 10.1 Wifi P7510
There is only one file in the zip file with this name (P7510XEUKL2_P7510XXKL2_HOME.tar.md5) I select the PDA and push the start button, but very little progress bar shown on my tab then stopped, and not increase the progress for 1 hour. and the last message in the odin message box is "image.cache" then i reboot the tab and error comes "error occurred during boot" then i again start the tab by pressing the volume down + power button then it comes on the selection page for downloading mode and recovery mode. then i go to recovery and recover my backup.
now tell me which option I select, I mean, PDA, Bootloader, Phone or CSC.
yasirshafiq said:
I download this stock rom from this thread http://forum.xda-developers.com/showthread.php?t=1651794&page=2
Plz guide me how i flash this rom on my Galaxy Tab 10.1 Wifi P7510
There is only one file in the zip file with this name (P7510XEUKL2_P7510XXKL2_HOME.tar.md5) I select the PDA and push the start button, but very little progress bar shown on my tab then stopped, and not increase the progress for 1 hour. and the last message in the odin message box is "image.cache" then i reboot the tab and error comes "error occurred during boot" then i again start the tab by pressing the volume down + power button then it comes on the selection page for downloading mode and recovery mode. then i go to recovery and recover my backup.
now tell me which option I select, I mean, PDA, Bootloader, Phone or CSC.
Click to expand...
Click to collapse
Installation Guide
1) Make sure you have the drivers installed
2) Extract ur firmware it to get its content which would be a .tar
3) Download Odin3 v1.85. Then, extract it to get these two required files – Odin3 v1.85.exe and Odin3.ini. Do NOT delete the .ini file since it’s required too. When asked in step 6 below, open Odin by double clicking on the Odin3 v1.85.exe file.
4) Disconnect your tablet if it’s connected to PC. Power it off. Wait 5-6 seconds for vibration to confirm complete switch off.
5) Now, put the Galaxy Tab 10.1 tablet in Download Mode (also called Odin mode) — press and hold, until Samsung Galaxy logo appears — these keys together: Volume_DOWN + Power.
6) Wait till you a screen with options to boot into recovery or download (odin) mode.
7) Press Volume Up key to boot into download mode.
8) Open Odin (from step 3) — Odin3 v1.85.exe. Admin privileges would be required!
9) Connect your Galaxy tab 10.1 tablet to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. And you should also see COM port with a number in Yellow. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve the right drivers installed!
10) Select these files in Odin at respective tabs.
11) Click the PDA Tab, and select the big .tar file “P7510XEUKL2_P7510XXKL2_HOME.tar.md5″
Important! Make sure these 2 check-boxes are selected: Auto Reboot and F. Reset Time. Also, leave the Re-Partition check-box clear (blank), as we are only using a .tar file or PDA file to flash.
12) Double check everything said in step 11.
13) Now, hit the START button to begin the flashing process. When it finishes, your tablet will automatically reboot — and you can unplug the cable when Galaxy logo appears. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s red and with FAIL written over it, the process flashing process wasn’t successful, Try again, and take care to complete the whole process without any break whatsoever.
Hit Like If it helps..
How do you get the drivers that work when the Tab is booted to ODIN? I've tried everything I can find and have been unable to get the correct drivers installed.
akhil17kr said:
Installation Guide
1) Make sure you have the drivers installed
2) Extract ur firmware it to get its content which would be a .tar
3) Download Odin3 v1.85. Then, extract it to get these two required files – Odin3 v1.85.exe and Odin3.ini. Do NOT delete the .ini file since it’s required too. When asked in step 6 below, open Odin by double clicking on the Odin3 v1.85.exe file.
4) Disconnect your tablet if it’s connected to PC. Power it off. Wait 5-6 seconds for vibration to confirm complete switch off.
5) Now, put the Galaxy Tab 10.1 tablet in Download Mode (also called Odin mode) — press and hold, until Samsung Galaxy logo appears — these keys together: Volume_DOWN + Power.
6) Wait till you a screen with options to boot into recovery or download (odin) mode.
7) Press Volume Up key to boot into download mode.
8) Open Odin (from step 3) — Odin3 v1.85.exe. Admin privileges would be required!
9) Connect your Galaxy tab 10.1 tablet to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. And you should also see COM port with a number in Yellow. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve the right drivers installed!
10) Select these files in Odin at respective tabs.
11) Click the PDA Tab, and select the big .tar file “P7510XEUKL2_P7510XXKL2_HOME.tar.md5″
Important! Make sure these 2 check-boxes are selected: Auto Reboot and F. Reset Time. Also, leave the Re-Partition check-box clear (blank), as we are only using a .tar file or PDA file to flash.
12) Double check everything said in step 11.
13) Now, hit the START button to begin the flashing process. When it finishes, your tablet will automatically reboot — and you can unplug the cable when Galaxy logo appears. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s red and with FAIL written over it, the process flashing process wasn’t successful, Try again, and take care to complete the whole process without any break whatsoever.
Hit Like If it helps..
Click to expand...
Click to collapse
Thanks
@akhil17kr thanks for your help.
caseym said:
How do you get the drivers that work when the Tab is booted to ODIN? I've tried everything I can find and have been unable to get the correct drivers installed.
Click to expand...
Click to collapse
Install Kies and it should install the drivers. I'm pretty sure you can download them from samsung.com too. But when you use odin make sure that Kies is completely closed (even check in processes in task manager) or odin won't work
Sent from my GT-I9100 using xda premium
Has anybody found a link to any custom or stock firmware for this tablet?
I have a small annoying issue that I am sure could be fixed with a flash, the back button randomly stops working until I reboot.
The baby Einstein on their 800 number thought a factory reset would fix it, then that using the software button was a good enough solution and had no clue about tablets in general. Through Support e-mail they were heading towards wanting me to ship the tablet back rather than supply a link to firmware. I explained to them it doesn't appear to be hardware related as it is random, and reboot fixes it.
im looking for the same firmware man, i have mine bricked :S
How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)
gmrastaman said:
im looking for the same firmware man, i have mine bricked :S
Click to expand...
Click to collapse
There is already a different thread on here with the information, but here is how I have personally done it......
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831
ROM for Zeki TB753b
Do you happen to have the Rom for the TB753b (JB 4.1.1)? I have soft bricked my mom's tablet, and need the rom so I can flash it, and hopefully get her tablet back in working order.
Zeki TBD753B stock rom
I am generally good at finding stuff, but I too can not find the stock rom for the tbd753b 7" zeki tab. Any help would be much appreciated. Thank You
need build.prop
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
dragonfriend0013 said:
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
Click to expand...
Click to collapse
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Got it working
vindicato said:
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Click to expand...
Click to collapse
I was finally able to get access to it through ADB and reset the permissions on the file. all is good now. I do still have problems with the screen "double tapping" though and have not figured out how to fix it. Does yours do the same thing.
The only problem I seem to have is that top left hand corner. Sometimes you have to tap that location a couple of times if that's what you mean
Sent from my TBD753B using Tapatalk 4
---------- Post added at 06:42 PM ---------- Previous post was at 06:37 PM ----------
That and updating my Super su binary...
Sent from my TBD753B using Tapatalk 4
please give the firmware for tb753b
please give the firmware for tb753b. for Livesuit.exe
ROM for TAB ZEKI tbdc1093b
any have de rom for this tab? ZEKI tbdc1093b
fallen links , FID: BN TB782B
Can someone help me? I need this rom , my tablet is brick
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831[/QUOTE]
So I bought this cheap tablet off of ebay and after about a week I connected it into the charger and forgot to unplug it.. Only next morning I saw and when I disconnected it it had turned off. So I turned it on and it was stuck in the newsmy logo and wasn't booting up.
There was nothing on the internet, but somehow I got it working again and for everybody's sake I'm posting what I did here.
First off, even though there are some references that this has allwinner A10 inside, ITS NOT. you will brick this if you flash an allwinner variant kernal.
If you are one of those brave souls who flashed on a allwinner kernals and bricked the thing, you would not be able to go to download mode even. Here is the steps to flash a fresh rom that would resolve most of issues:
1. Download driver pack from the attachment of this post
2. Download RKBatchTool here: http://www.x-drivers.com/catalog/fl...s_electronics/models/rk_batch_tool/27576.html..
3. Now turn off your tablet. If it doesn't turn off press a needle head into the reset pinhole and hold it for 5 seconds
4. Open device manager from your computer
5. Then hold the power on button and volume up(that is the one closer to power button) until it turns on. It'll boot your tab in download mode. After the green robot icon appears connect it to the computer by carefully monitoring device manager of computer
*** If you have flashed an allwinner or other rockchip kernal based ROM earlier and do not go in to download mode or no new device installation in your PC there's a real possibility your download mode combination may have changed. Turn it off by pressing needle to reset pinhole. Then turn off and connect it to PC. Then turn it on and then while in boot screen hold volume up. if not try similar procedure by holding volume down or back buttons. If you see driver installation in the PC and nothing in the tablets screen, thats fine. You can continue with the flasing
6. The driver installation probably will fail. Identify which device that is newly added to the device manager.
7. Right click on the device -> Update Driver. Then manually select -> Have disk then give rockusb file from drivers you just downloaded(if your system is 64-bits use files in amd-64 folder)
8. Then select RK29 as the device and update the driver
9. Now extract and run RKBatchTool and you must see under connected devices button #1 highlighted in green
10. Download official ROM here: http://220.168.57.227:1949/cunchu/20120312T3youhuaruanj.rar
There are other ROMs for T3 here as well. But this is the only thing that works
11. Extract it and give its update.img file path to RKBatchTool FW Path
12. Hit Restore
13. Wait few minutes for flash to complete
14. Then the tab will restart once or twice and will start booting up. This process should take maybe 5 minutes or more. Be patient
15. Then it'll finally boot.
I will post a Jelly Bean ROM for this tab here as soon as I cook one
Comments are much appreciated
Thank you! Thank you! Thank you!
Was searching for a guide to get my brothers Newsmy Newpad T3 up and running.
Thank you for this guide. will definitely try it out and leave a feedback.
P.S. Jellybean sounds interesting.
OK. After spending two days I finally got it to detect the Newsmy Newpad T3.
I had to install Android SDK for the USB drivers. (Don't know if it detected from that.)
Then downloaded super one click root. Found the android drivers in it, and when it asked which driver you want to install I gave "Android Composite" not sure but something in those lines.
Successfully rooted it.
Then off the tab and connect the USB cable, press power and volume up (one that is near the power) and when the tab boots
If it asked for drivers please do same as above
Now run the firmware installer provided inside the update.img folder that you downloaded from the original post by suki300me step 10. It is in Chinese and the first option is to change it to English found on the bottom screen.
If everything is set your tab will be in a black screen only thing you know is that it is on is the sound windows 7 makes when the phone is connected to it. Choose the udate .img file and press upgrade.
It will run up to 3-4 stages and will say data copy error. Remove the cable and press power, it will star installing ICS give it few minutes and you are done.
It took me many attempts so don't give up if it didn't work on your first try. Hope this helps someone.
Boot
Hi
I get one newsmy t3 tablet from my friend. The only problem the system is never loaded (stuck at the boot). I try the power+volume up but just the black screen appaers. Btw only turns on when its plugged. Please give me some tips.
hello! I have a tablet "energy Smailo 9.7" and can not access recovery mode. I tried all combinations of buttons "Volume + / - and Power Button" but nothing works. The back has a little button that must be pressed with a toothpick to reset. Can someone help me to get into download mode / recovery mode? thank you .
sorry for my englis i ussed google translate 1:laugh:
You can boot into recovery via adb, forum.xda-developers.com/showthread.php?t=1853159 . Though, please be careful and only use this as a last resort.
smailo hard reset
for a smailo web energy 7 how to do a hard reset?
please I need help with that because my tablet is stick at android logo and I can not use it.
How to rewrite firmware to smilo energy tab 7
Here's the way:
Install Pheonix suite 5(last version)
Download firmware from here :i can't put the link here, search on internet nuclear 6225 firmware download(XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210)
In pc suite press firmware select the file
Press upgrade
Close tablet
Press long volume
Connect to pc with micro usb cable
Press power shortly about several times, till the tablet is recognized to pc
After that the soft will be replaced(do not select full format)
When is finished the tablet will restart, will appear an error, but after that she will work
robert Hard&Soft Targu NT said:
Here's the way:
Install Pheonix suite 5(last version)
Download firmware from here :i can't put the link here, search on internet nuclear 6225 firmware download(XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210)
In pc suite press firmware select the file
Press upgrade
Close tablet
Press long volume
Connect to pc with micro usb cable
Ps. I used this FW: XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210
Press power shortly about several times, till the tablet is recognized to pc
After that the soft will be replaced(do not select full format)
When is finished the tablet will restart, will appear an error, but after that she will work
Click to expand...
Click to collapse
The firmware installs, but the touch very often is unresponsive and sometime when i press on something, it presses something else.
I mention thta the touch was working fine before firmware update. I needed to flash another firmware because of the "too many pattern attempts"
We could use some another software for this tablet?
Ps. I used XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210