Related
ok it's the official dutch t mobile rom but with a few things added :-
windows messenger 10.6
htc home plugin
htc audiomanager
htc album
htc x button v2
schaps 12 button comm manager
schaps advanced config tool
battery meter
total commander
kaiser 3g dialler
ftouchflo a4 - (this is not the cube just a version of touchflo)
and i left all the t mobile network settings in there too.
your phone needs to be super CID, and hard spl is also a good choice as nobody wants to be the proud owner of a brick, all the programs needed to do this can be found on this wonderful site, this will only flash your operating system not your boot splashes.
This is the first time i have attempted at cooking\customising a rom so it may be a bit unstable
had a bit of trouble configuring the ftouchflo so got it working by doing this -
soft reset
open the windows menu then go to - instellingen - systeem - scherm
then realign the screen
then got to your programs menu and start the ftouchflo and calibrate it, this should get it running
FIRSTLY a big thank you to all the people who run, moderate and all who have contributed to this web site, without their knowledge, insight and patience it would not have been possible to learn how create this rom..!
the download link is:-
http://rapidshare.com/files/67380306/cloggyrom1.exe.html
as i've seen in : http://forum.xda-developers.com/showthread.php?t=358704
everyone in commenting about bug(the camera wont work, failed to flash,etc)
so i made this thread to help nhocbanme monitor the bug that occured in his ROM
make the report format as follows:
----------------------------------
1. HP iPAQ version : rw6828,rw6818 or rw6815
2. ROM from nhocbanme that is used : 1.1, 1.2 , 1.3, or 1.4
3. Bugs found : camera not working, or some application that's installed wont work(list the name of the application),etc
4. Suggestion : change the keyboard color into default, or add SRSWOW,etc
----------------------------------
this way nhocbanme and all of us user of his ROM could evaluate it and decide which is the best.
dj_kopral said:
as i've seen in : http://forum.xda-developers.com/showthread.php?t=358704
everyone in commenting about bug(the camera wont work, failed to flash,etc)
so i made this thread to help nhocbanme monitor the bug that occured in his ROM
make the report format as follows:
----------------------------------
1. HP iPAQ version : rw6828,rw6818 or rw6815
2. ROM from nhocbanme that is used : 1.1, 1.2 , 1.3, or 1.4
3. Bugs found : camera not working, or some application that's installed wont work(list the name of the application),etc
4. Suggestion : change the keyboard color into default, or add SRSWOW,etc
----------------------------------
this way nhocbanme and all of us user of his ROM could evaluate it and decide which is the best.
Click to expand...
Click to collapse
Thanks bro so much!!!!
I'll try to make best ROM
1. HP iPAQ version : rw6828
2. ROM used : nhocbanme's 1.4
3. Bugs found : Camera screen flickers. Autoconfiguration does not apply my MMS & GPRS settings. System volume is still soft compared to other ROMs.
4. Suggestion : Implement the battery drain improvement like homers's ROM.
Side note : My device unable to power up from standby randomly after flashing to WM6 rom. Any rw6828 users out there having the same issue as me ? I suspect is the activesync auto run during device standby. I've applied the fake server tweak but still the same.
cwwang16 said:
1. HP iPAQ version : rw6828
2. ROM used : nhocbanme's 1.4
3. Bugs found : Camera screen flickers. Autoconfiguration does not apply my MMS & GPRS settings. System volume is still soft compared to other ROMs.
4. Suggestion : Implement the battery drain improvement like homers's ROM.
Side note : My device unable to power up from standby randomly after flashing to WM6 rom. Any rw6828 users out there having the same issue as me ? I suspect is the activesync auto run during device standby. I've applied the fake server tweak but still the same.
Click to expand...
Click to collapse
OK, i'll do it
That was a nice and quick reply from you .
Btw can you try to delete all folder with "xip" in their file name in SYS & OEM folder when make image on your next rom ? Maybe that could solve some Screen Of Death (SOD) issue. Just looked into some interesting post that someone in xda-developers found here :
http://forum.xda-developers.com/showthread.php?t=339792&page=6
1. HP iPAQ version : rw6815
2. ROM used : nhocbanme's 1.4b
3. Bugs found : Camera don´t work. Autoconfiguration does not apply my MMS & GPRS settings, so i can´t send or receive messages (portugal).
4. Suggestion : keep the apps from hp camera from wm5 original rom??!!??
hi ncohbanme,.
let me try to look at your xip, the SOD issue, might come from there,.
and i think you dont need to delete the xip folder, LangDB (it is used by anopther module, if you delete it, some module will not be able to search for it, then you'll have a bug)
can you upload your XIP.bin?
Actually, XIP folder isnt necessary in the kitchen (inside ROM folder), but you need one ROM file that have a new OS, and best XIP, inside the ROM folder,.
may it help you,.
----------------------------------
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.4
3. Bugs found :
after using wm5torage and when u use file explorer the SD card is not avaliable until u take out the card and put it back into the slot again.
4. Suggestion :
SRS WOW is functioning if you install Netv3.5.cab again(since i think the rom has already got net3.5 pre-installed),its strange because it says error installing at the end...but the SRS works after reinstalling netcfv3.5...
----------------------------------
1. HP iPAQ version : rw6815
2. ROM from nhocbanme that is used : 1.4
3. Bugs found : Cam doesnt work
4: Suggestion : Nothing \o/ the cam is crap anyway. Thnx!
nphix said:
1. HP iPAQ version : rw6815
2. ROM used : nhocbanme's 1.4b
3. Bugs found : Camera don´t work. Autoconfiguration does not apply my MMS & GPRS settings, so i can´t send or receive messages (portugal).
4. Suggestion : keep the apps from hp camera from wm5 original rom??!!??
Click to expand...
Click to collapse
i fond this rom http://rapidshare.com/files/78871669/biohazard.rar.html, from pda hack for rw6815, and i´ve flashed mine with this rom and the camera works just fine.
the camera app is the one from nhocbanme ver 1.04a for 68x8, and works great.
however my 6815 keeps freezing with this rom, it has many bugs
anyone help solve camera bug from nhocbanme ver 1.04b?
well, I am using a 6828 from Malaysia, does not have any prblem with the camera... and the camera seems having better lighting detection now anyway...
nphix said:
1. HP iPAQ version : rw6815
2. ROM used : nhocbanme's 1.4b
3. Bugs found : Camera don´t work. Autoconfiguration does not apply my MMS & GPRS settings, so i can´t send or receive messages (portugal).
4. Suggestion : keep the apps from hp camera from wm5 original rom??!!??
Click to expand...
Click to collapse
wm5storage works but when deativated must take off card
sim manager after saving contacts to sim they became unhnamed
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
3. Bugs found :
#1: USB ActiveSync disconnect in few minutes, Bluetooth ActiveSync works properly, however
#2: Some keyboard input methods do not work :-
touchpal - fail to startup
tengo thumb - nothing happens after installing
#3: PCM Keyboard (Built-in) does not work
4. Suggestion : Thx so much!
q_ware said:
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
3. Bugs found :
#1: USB ActiveSync disconnect in few minutes, Bluetooth ActiveSync works properly, however
#2: Some keyboard input methods do not work :-
touchpal - fail to startup
tengo thumb - nothing happens after installing
#3: PCM Keyboard (Built-in) does not work
4. Suggestion : Thx so much!
Click to expand...
Click to collapse
#1 I don't meet this problem, try to HardReset.
#2 I think have problem with SIP.
nhocbanme said:
#1 I don't meet this problem, try to HardReset.
#2 I think have problem with SIP.
Click to expand...
Click to collapse
It seems that it hangs at the windows mobile 6.1 screen (green) everytime after I do a hard-reset, but then the 'first start welcome screen' appears after I doing a soft reset
the problem in #1 is fixed after hard-resetting
thank you so much!
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
problem found
1 cannot change keyboard
2 camera work but some application use camera feature not work for hp model it can use with atom model
Thank .
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
problem found
1.Bluetooth earpiece asnwer the call, the sound come out from the phone & not from the earpiece.
2.Cannot copy sim contacts to the phone. No Sim manger
HP Rw6828 ROM v1.5a wifi bug
after refresh this rom, everything comes right! however, i cannot connect to wifi AP with WPA-PSK TKIP. I'm sure the Key is correct, and can be used to make connection (I did tested on my laptop). How come this happen?
tltang13 said:
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
problem found
1.Bluetooth earpiece asnwer the call, the sound come out from the phone & not from the earpiece.
2.Cannot copy sim contacts to the phone. No Sim manger
Click to expand...
Click to collapse
#1 does not happen to me, I'm using Bluetooth Plantronics, it works perfectly fine
1.4 Bugs
HP RW6818
ROM Version 1.04 68x8
Working:
Camera, flash 5-10fps video, great nightmode
BT A2DP all working including BT Keyboard and Stereo BT
Bugs:
- WM5 Storage Card Bug (after deactivate SD not detected need to rem/ins)
- Video Capture (noisy video capture)
- Transcriber hangups (initial use of transcriber toolbar hangs the phone)
- Constant screen updates with the file explorer (always refreshing)
- Fast battery drain compared to wm5
- No full battery charge notification or indicator continuously charging
- Equalizer non-functional
Recommendations:
Please include LG Today Menu WITH Menu buttons
QuickMenu start menu replacement
HTC AGC controller (Hermes works, for HP's Automatic Gain Control)
Additional Frames for Camera (i could supply, around 7mb additional)
also UPX4PPC and all added apps should be compressed by UPX
READ THIS FIRST
Finally Working Bluetooth problem
For ATOM/ATOM PURE ONLY
Download link moved to post #2
Step by step upgrading
NOTE: These steps only apply if you have an ATOM/ATOM Pure.
Basically, there are three steps to flash a custom ROM to your ATOM.
1. Choose and download your choice of custom ROMs
2. Flash the custom ROM to your Atom using the Device Software Update Utility (DSSU)
3. Flash the custom ROM using MiniSD
Preparation
Backup your personal information using a program such as PIM Backup (freeware). Also make sure your phone has at least a 50% charge. You need M$ ActiveSync 4.5 for XP or Windows Mobile Device Center for VISTA and 7 to upgrade your device through PC.
Please read through this guide and download the all the necessary files beforehand. That way, you know exactly what you're getting into.
Choose and download your custom ROM
There are many, many custom ROMs out there for the Atom.
Look through the threads and find a ROM that you like. Custom ROMs differ in their preinstalled software, system settings, performance tweaks, and more.
ROMs usually come compressed in a .zip file. Extract the downloaded ROM file to somewhere on your hard drive temporarily in preparation for the next step.
Flash Custom ROM Using DSSU
Copy the custom ROM file (usually came with 6 files) to C:\WINDOWS\Temp folder you just extracted.
Once you've got everything hooked up correctly, run the Device Software Update Utility (DSSU).exe program inside of the C:\WINDOWS\Temp folder you just copied. Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
In case you can't update the ATOM in active mode, you may need to update by entering bootloader mode. Hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. Then connect your phone via USB cable to your computer.
Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
Flash Custom ROM Using MiniSD
*Not recommended
Here's the step how to flash your Atom using MiniSD.
1. Extract downloaded custom ROM to somewhere on your harddrive.
2. Cut first 12byte header of diskimage_Ver.nb0 using hex editor.
3. Rename diskimage_Ver.nb0 to diskimg.nb0
4. Rename ExtendedROM.img to extended.img
4. Copy both files diskimg.nb0 and extended.img to your miniSD
Now, hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. The Atom will flash the new ROM automaically. Once it done, setup the device and enjoy the new custom ROM.
Big thanks to HelloWorld, [email protected], Tj's and all atom tester...
WM6.5
Build 28205
Mediafire Clean-New UI 04/23/2010
Build 21895
Mediafire Clean 04/15/2010
Mediafire Neo Shadow 04/15/2010
Build 23016
Mediafire Clean 02/15/2010
Mediafire Neo Shadow (Bluetooth not Working) 02/12/2010
WM6.1 latest WM6.1 Core OS
Build 21056
Mediafire Clean 03/08/2010
4Shared Mirror, thanks to Vincentshjuan
Build 21054
Mediafire Clean 02/19/2010
Upgrade instruction:
Download and execute downloaded file, if something goes wrong, extract it and copy all files to C:\Windows\temp.
If you already running wm61 or wm65 go for OS+ExtendedROM, for wm5 user go for ALL option.
Not expected for DONATION, but always appreciated it.
Thanks Glossy.....wow first one in line..........
Downloading now and will flash it later.....will update you from the try outs.
Good work though!
I'm wondering and really hope if this is very CLEAN, FAST & STABLE WM6.5 ROM in LOW BATTERY CONSUMPTIONS for O2 XDA Atom. Thanks before GlossyX1, you're the Atom ROM masterpiece too!
Wow! Great!
Thank you for this new build. Will try soon...
Have a try and gimme some report...
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
vincentshjuan said:
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
Click to expand...
Click to collapse
What do you mean by unlock the EXTENDEDRom? I use this ROM for several days and found no problem on my device. Now I uninstalled PersianBluetooth to save more memory.
Did you found another issue? Has anyone else try this ROM?
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
cwiggler said:
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
Click to expand...
Click to collapse
Waiting for your feed. I'm not tested yed to install SPB mobile, but there's no issue when I install another cab application. You have to try it by your self and give us a report. ATOM is QVGA device. thanks
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Add application
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
I mean WM6.5(this ROM)....
vincentshjuan said:
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Click to expand...
Click to collapse
I see, you can't unlock the EXTRom as it is configured automatically in a file named config.txt. So, every chef has configured it depend on what it is configured in config.txt to EXTRom. Another thing, don't ever use other EXTrom but what is it included on ROM package, it wont work.
For the Ring mode, I can set it as usual in ring mode. Just go to setting->sound and notification->incoming call. Not working??? Try this, set to ring and vibrate, restart and set to ring.
Bluetooth??? Need some magic
I just tried to install SPB 3.5 and it works as well
vincentshjuan said:
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
Click to expand...
Click to collapse
No you cant, while run standalone application (.exe) you wont see any shorcut because it not registered to registry and doesn't have any shortcut (lnk). You can try to build CAB file and set all shortcut in (initflash.txt) for eq to put TorchLight.exe then write it down Directory("\Windows\Start Menu\Programs\"):-File("Torch.lnk","\Windows\TorchLight.lnk"), it will show Torch on Start Menu->Programs
Try this to make a CAB file http://forum.xda-developers.com/showthread.php?t=400221
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
So bluetooth handfree is not working again
vincentshjuan said:
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
Click to expand...
Click to collapse
Thanks, glad to hear you'd loved the ROM.
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
cwiggler said:
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
Click to expand...
Click to collapse
It usual happen while atom run out of memory. My ROM preinstalled with PersianBluetooth, when you try to install custom home screen eq SPB then your screen goes white. Here is a tip for you: Try to remove PersianBlue and see what happen. I'm not recommended to use any custom Home Today screen because WM6.5 use more resource than you can expected.
dragon man said:
So bluetooth handfree is not working again
Click to expand...
Click to collapse
I don't have any bluetooth device, test it by your self and give me feedback.
Cheers...
Dragon,
Bluetooth handsfree is fine, working. Only issue is choose your bluetooth devie wisely as you can only add 2 bluetooth device only at the moment. So for me, luckily 2 is just enough, one for activesync and one for handfree(bluetooth). The reason is after you added the 2nd bluetooth device, you can't see add new device tap anymore.
Good luck....
Hello,
with this Fix you have the oppinion to run the latest
phone canvas edition on the newest build
this fix works perfekt with build 23102...
i am establish after several hours and many many hardware-resets that only one file must be changed...
changelog version 3 fix:
source: build 28014
only "cprog.exe"
with this fix:
phone canvas shows incoming dial information
phone canvas display correct contact-information
problems occur sometimes:
cprog.exe crash sometimes, only solution: soft-reset
how to install this fix:
1. install version of phone canvas (tested with leo v4.2, works perfect)
2. end "cprog.exe" with fdc soft taskmanager
3. install "everal phone canvas fix 28014 v3.cab"
download v3:
http://www.mediafire.com/file/ynjkiedihkg/Everal Phone Canvas FIX 28014 V3.cab
So i call all resource-hackers to view the latest cprog.exe with this build for finding the difference....
thanks
everal
fix v3 is published...
I will test it when I get home and cook a new rom. Question though, can it be coocked normally or should it be installed after coocking??
in my oppinion i would it not cookin into the rom...
now i only update one file in v3, but sometimes the old "cprog.exe" will be crash, in this case only soft-reset can start "cprog.exe" again, may be other solutions ???
thanks i test it now
Hello,
I install the fix, but didn't work. I don't now, if I install the right dialer.
Look at the link below please.
http://forum.xda-developers.com/showpost.php?p=5708232&postcount=361
Thanks digidigi123
Very true.. it seems that the COM8 cprog is ok but it just works in one call.. then the cprog cant receive and cant do phone calls... weird but true...
so anybody has the cprog of a caller ID fixed phonecanvas?
thnks Everal your da Man, this works on my cooked lg ks20 with 6.5 23134!
thanks very much, it's work for me
Many thanks
everal said:
Hello,
with this Fix you have the oppinion to run the latest
phone canvas edition on the newest build
this fix works perfekt with build 23102...
i am establish after several hours and many many hardware-resets that only one file must be changed...
changelog version 3 fix:
source: build 28014
only "cprog.exe"
with this fix:
phone canvas shows incoming dial information
phone canvas display correct contact-information
problems occur sometimes:
cprog.exe crash sometimes, only solution: soft-reset
how to install this fix:
1. install version of phone canvas (tested with leo v4.2, works perfect)
2. end "cprog.exe" with fdc soft taskmanager
3. install "everal phone canvas fix 28014 v3.cab"
download v3:
http://www.mediafire.com/file/ynjkiedihkg/Everal Phone Canvas FIX 28014 V3.cab
So i call all resource-hackers to view the latest cprog.exe with this build for finding the difference....
thanks
everal
Click to expand...
Click to collapse
I had the same problem with a Toshiba TG01 running MIROM10 cooked ROM, SPB mobile shell combination. Caller did not show up. I used your fix in combination with this task manager http://www.dotfred.net/TaskMgr.htm
Realy nice because it p***ed me a lot not to see whom is calling me. Especially because I am using the phone both private and on business and not seeing whom is calling is anoying.
Thanks again.
Hi all!
I need a little help! I tried to install this fix above with no succsess! Of course I killed cprog.exe from processes. The cab can not install (error message), i unpacked the cprog.exe from it, and tried to copy it manually. Now I have 2 cprog.exe in my windows folder: CPROG.EXE and cprog.exe. I can't delete either of them and the call-id problem is still present.
What can I do to make this fix work?
Thanks in advance!
I downloaded the ROM from sunnysoft and language overlay. While the ROM is installed correctly, the problem I have with the overlay language. After installing the overlay do HR and then Raphael beautifully starts and joins the customization. Customization goes almost to the end (installed opera, black background, etc..) Unfortunately, at the very end of the installation stops: installing_htc_raphael_5in_eeu_5_05_401_1_vo3.cab and jams (maybe not quite ob activesync sees the phone and can sync with him)
I tried to upload the ROM HTC web site and effect the same
Has anyone any idea to install an overlay? I'm very anxious that that it was the original HTC soft pad with Polish
I found this files htc_raphael_5in_eeu_5_05_401_1_vo3.cab windows directory and tries to install it from your hand and now the best ... shows will get a message unable to install aplication. Please update your device ROM is the required version before trying again :-(