Related
Don't know if it's just a problem with my phone or if anyone else is experiencing this, but my phone is getting frequent bluetooth disconnects, and wifi is inop and gprs can only go to t-zones website. My wifi is my biggest concerns but I did a search and could not find anything similar to my problem, because I have a mac address, my wlan works as i can find and connect to networks, but when i try to access the web the wifi disconnects
and the page says it cannot be found bad server or something like that. Never had this problem with 3.5.7a so i am not sure if something get messed up with the last flash and now just acting up. Also am on radio 1.50. running schaps 3.54b. Help please as i need this phone for work!!
I had a similar problem and there is a cab fix you need to SEARCH. I cant remember where I found it but its on this site.
I've searched and found nothing. Oh yeah forgot to mention I'm on tmobile. And i've tried lurchs cab setting for tmobile does nothing. Also tried custel's proxy remover cab, does nothing. Anymore suggestions??
Okay so i flashed back to cacahutes rom and wifi and gprs is working again. But i like the setup of schaps rom can someone please tell me if there is some setting that cacahutes has that schaps doesnt?? I'm thinking its something in the registry that's getting corrupted. Don't know where to look!
I thought I saw a .cab file here somewhere that would allow you to bridge the 3G/EDGE connection to the WiFi connection so I can share my 3G over WiFi to laptop or whatever.
Anyone seen this? I cant remember the name, thought it was something like WMBridge or something.
Thanks
G
GuardianZX9 said:
I thought I saw a .cab file here somewhere that would allow you to bridge the 3G/EDGE connection to the WiFi connection so I can share my 3G over WiFi to laptop or whatever.
Anyone seen this? I cant remember the name, thought it was something like WMBridge or something.
Thanks
G
Click to expand...
Click to collapse
internet connection sharing will allow you to share your 3G over bluetooth or USB to your laptop !!
and now that I think about it you can almost certainly go through the arduous and difficult task of getting activesync to connect over an adhoc wifi connection, once that is done you will be able to use the phone as a 3G modem for your laptop.
ice_coffee said:
and now that I think about it you can almost certainly go through the arduous and difficult task of getting activesync to connect over an adhoc wifi connection, once that is done you will be able to use the phone as a 3G modem for your laptop.
Click to expand...
Click to collapse
u can do it tht way but its hard, and requires a registry hack, which to be fair doesnt work all that well, disconns after a couple of mins at best, bluetooth is the way to go if u want wireless connecton, although i use the lead for security, u can use the 3g conn as a modem, but then if u like us use tmob wb and walk then u cnt use ur data package.
hope this helps
Peter
The app is called wmWifiRouter. Looks like they just came out with a new version the 10th. Forget bluetooth, its not secured at all, and only lets you share with one device. With wmwifirouter you can share with many. See the link below.
http://forum.xda-developers.com/showthread.php?t=341398
excellent that is exactly what I was looking for, I will play with it today and see if I can get it to work.
Thanks
G
Should be a simple matter of copying the exe to your device and running it. It takes care of all the registry settings, starting up Internet Sharing, keeping the connection alive, and with the latest version you can even put the unit to sleep and your connection will stay alive. About the only thing it doesn't do is set up a peer-to-peer profile with a fixed IP address, but the thread above walks you through that. Make sure you set the profile to use WPA encryption (NOT WEP or 'open') and set a password.
techntrek said:
The app is called wmWifiRouter. Looks like they just came out with a new version the 10th. Forget bluetooth, its not secured at all, and only lets you share with one device. With wmwifirouter you can share with many. See the link below.
http://forum.xda-developers.com/showthread.php?t=341398
Click to expand...
Click to collapse
I finally got around to trying this and have had no luck. I followed the directions as best as I could tell. Anyone verify if this works on the Athena? I used to have the method set up manually but hadn't set it up again since updating to AP3.0. This would be much handier... if works!
wgary said:
I finally got around to trying this and have had no luck. I followed the directions as best as I could tell. Anyone verify if this works on the Athena? I used to have the method set up manually but hadn't set it up again since updating to AP3.0. This would be much handier... if works!
Click to expand...
Click to collapse
Powell,
Why not build this into AP 4.0 ROM?
eaglesteve said:
Powell,
Why not build this into AP 4.0 ROM?
Click to expand...
Click to collapse
i was trying for 3.0 actually but couldnt get it to work at time bc of confusing instructions. i will though in 4.0 100%
I verify that it works with the Athena and it works great. Let me know if your having trouble. I've been using it everyday now with no problems.
Pawel062 said:
i was trying for 3.0 actually but couldnt get it to work at time bc of confusing instructions. i will though in 4.0 100%
Click to expand...
Click to collapse
The directions are confusing because the newer method was grafted onto the same thread as the older method. So it's hard to tell what's what. I put about an hour into this but made no progress. The exe file doesn't appear to do anything on the Athena...
MWillis561 said:
I verify that it works with the Athena and it works great. Let me know if your having trouble. I've been using it everyday now with no problems.
Click to expand...
Click to collapse
Sorry, just saw your response as I wrote mine. Here is what I did:
1. set up an ad hoc network on my Athena. IP address 192.168.0.1 (another place saide 192.168.0.7--tried both)
2. Set up on my client (MacBook Pro). A connection was established.
3. Ran the exe file -- nothing happened. One comment said to deactivate the network before running. I did this in various degrees with no success.
4. Also opened up the Internet Sharing applet and tried to connect manually -- "USB cable is not connected."
Clearly I'm missing something here. It would be very handy to have this capability. Can you clarify??
Not sure why you are having a problem - I unzipped the zip, transfered the exe to the athena and it ran on the first try after first setting up the ad-hoc wifi connection (settings, connections, wi-fi, network adapters tab, IEEE..., use specific IP address in the 192.168.x.x range; then go to the other tab and set up an ad-hoc connection).
I had an even worse experience. Everytime I ran the exe, my Athena locked up, needing a complete reset each time.
I gave up in the end .
I have got other methods to work using Mortscipts, but it does seem like something that would be well worth someones time sorting out for the good of us all.
Have you tried the latest version of wmWifiRouter? The developer released a new version of it earlier this month. Its on version 0.8 now.
Hi all
i am having problems internet sharing. i have an unlimited data plan and my mogul was connecting my laptop yesterday. it has just stopped and i cant get it back! anyone else having the same or suggestions?
thanks in advance.
me to
Same exact thing i have reflashed reinstalled changed adhoc network names everything even reg usb connection have gotten it to say internet was good but wouldnt actually transfer my only question is if you are on the new gps radio and rom because the issue started a couple hours after i went to new rom i am wondering if sprint built in some way of checking on tethering into new radio and rom if so this sucks and i dont want gps anymore
I have dcd's 2.2.0 with 3.27 radio. I do not know why it has happened. I cant seem to find solutions anywhere.
I had issues with this after awhile as well...I think it may be Verizon killing tethering access from their side of things....
I solved it by buying a copy of PDANet...
Works like a charm and even better than the standard tethering methods.
does pda net work with wifi and i have sprint and last but not least hopefully we dont get charged
Well I just got a trial of PDAnet and it works. I am going to do a speed test to see what I am getting. Hopefully no charges with sprint.
KiwiPike said:
Hi all
i am having problems internet sharing. i have an unlimited data plan and my mogul was connecting my laptop yesterday. it has just stopped and i cant get it back! anyone else having the same or suggestions?
thanks in advance.
Click to expand...
Click to collapse
are you able to connect w/ activesync??? i cant even sync my contacts
I am having the same problem with my touch also I just tried connecting with internet sharing yesterday it says connected and the laptop gets an ip and connects but it won't go anywhere on the internet not sure why this is happening
Same here...it will conect but won't do anything
I am able to connect with activesync. I had to make sure that i had enable/use USB connections checked. I reinstalled activesync and restarted the pc and softrest my ppc and I have not had a problem since. I was unable to get anything using internet sharing, but I am on my laptop right now using pdanet. Ran a speed test and getting 1.1MB/sec down 532kb/sec up.
what i dont understand is if this is related to the new rom or if sprint just started trying to do something so it disabled the regular internet sharing and also want to know if pda net works wirelessly
I just tried to tether with my Mogul on Sprint; it seems to be working without issue. I used the internet sharing app on the Mogul.
I'm using DCDs 2.2.6 ROM.
Try #1
i'm not an expert but for what its worth this worked for me when i had that problem...
Solution #1
Open internet explorer in ppc
Open internet sharing
Connect phone to pc
Solution #2
You will need a reg editor
goto HKLM/Comm/InternetSharing
and delete Extension with the data tag as rilphone.dll
restart the phone and enjoy...
but please make sure u back ur registry up or remember this post to go back to it so if its messed up u can place that value back and FYI its a REG_SZ type value.
Solution #3
Try #2 then #1
AtOMiiX
-CiiO kUrWa
PDA Net will work with any method you can connect to Activesync with...
I have never tried to get it to sync via Wifi...
And didn't have a lot of success with Bluetooth either...
PDA Net also works with WMDC. All it really requires is for the phone to be connected to sync and it will work.
zaxdude said:
I just tried to tether with my Mogul on Sprint; it seems to be working without issue. I used the internet sharing app on the Mogul.
I'm using DCDs 2.2.6 ROM.
Click to expand...
Click to collapse
the problem is stay connected for a couple hrs and see if you can keep connecting
mastachillz said:
the problem is stay connected for a couple hrs and see if you can keep connecting
Click to expand...
Click to collapse
I wouldn't be a good person to test this out then....I don't think I ever tether for a couple of hours at a time...
atomiix said:
i'm not an expert but for what its worth this worked for me when i had that problem...
Solution #1
Open internet explorer in ppc
Open internet sharing
Connect phone to pc
Solution #2
You will need a reg editor
goto HKLM/Comm/InternetSharing
and delete Extension with the data tag as rilphone.dll
restart the phone and enjoy...
but please make sure u back ur registry up or remember this post to go back to it so if its messed up u can place that value back and FYI its a REG_SZ type value.
Solution #3
Try #2 then #1
AtOMiiX
-CiiO kUrWa
Click to expand...
Click to collapse
dcd rom already has this deleted
you have to close activesync for wmwifirouter that seems to be working and i changed max cm retry to 5 from 0 in the registry key referred to before
nevermind something weird going on if i start a secured connection in my browser then i can stay on that site if i switch to the adhoc connection but i cant even go to google. ex log on to xda and switch to wmwifiroyter and keep browsing posting whatever but cant go to any other site.
i think this is a win 6.1 issue only
Try a differant computer, I can tether just fine with my laptop, but I have problems tethering with my decktop pc. It might be a windows XP issue
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
I've also tried a few registry edits, and used all variations of modem scripts, and got all the dialup info from verizon directly (so I know it was right ) but could not get dialup to work either. Usually not detecting a carrier, other times lockups.
I truely want to get the bluetooth-PAN working again as it did on my tilt. Anyone have this working on the MAc with a XV6800 on verizon?
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Cycomachead said:
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Click to expand...
Click to collapse
As mentioned, I have tried a ton of different methods to try and use the data connection, from using dialup settings, to trying to get the Bluetooth Pan working. I've removed and re-paired the device from my mac, flashed roms, hacked away at the registry a ton of times. Nothing seems to give so far.
I've got one more suggestion, found here: http://forum.xda-developers.com/showpost.php?p=1794133&postcount=29
I'm going to give this a shot tomorrow and will let you know how it goes.
Eponymous069 said:
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
Click to expand...
Click to collapse
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
thetaz01 said:
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
Click to expand...
Click to collapse
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Eponymous069 said:
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Click to expand...
Click to collapse
hey, ok great, i just downloaded the file, Just one question..
The file i downloaded has about a page of Reg Key changes, you didnt mention that in your "thngs to do"
Just want to see if i am to make all those changes or not.
thanks
So, your problem is in getting the internet connection to work and not connecting it to the mac, right? Does your mac recognize the phone as a modem?
If you're using MR1 I think you might need to hard reset and the soft reset right before the Verizon customizations run. You won't be able to run their apps but there won't be software to cripple the phone.
i have the same exact issue i have a new macbook pro and the bluetooth connects however the speed is slower then dial up it works perfectly however on bootcamp apple has to change the drivers
So more results.
I tried all the registry edits, (much easier with CD-Regedit so you can make the changes on your desktop) and now internet sharing does not even allow me to select a connection type, it had worked previously.
The only thing that was missing before I made the registry changes was that when I pair the phone, in the services listed, "Network Access Point" is not one of the listed services. My old phone has this service listed, and this is how I used it, where I started internet sharing on the phone, then selected the bluetooth device (phone) on the mac and selected: "Connect to Network) and it worked flawless.
Back to the drawing board. I'm going to try next to re-flash the MR1 rom and do as Cycomachead suggested and stop verizons customizations from happening.
bryanw17, what were the exact settings you used for dialup on the mac. The modem script used is probably the most important piece.
Number: #777
Username: Phonenumber (or [email protected]????)
Password: (We know this one, not sure if it's legal to post though)
Darn, I wish I could provide more help. It is indeed possible in Leopard, I had it going before I began flashing my phone - and I no longer have a data plan to test, otherwise I'd be using it a lot more!
aparently no one with a new macbook pro can get bluetooth pan to work. I have it connected however the drivers for the new macbook pro do not provide a good connection if you search the mac forums theyve been talking about it on there. I dont use a username n password however because i use the internet sharing app for the moment i am using wmwifirouter to connect online however my xv6800 doesnt charge at the same time for some reason so u can only use it till the battery dies
So some more results.
I installed ICS and all the registry edits. Then the internet Connection Sharing did not function at all. I verified the registry settings, all were fine. So no dice with me.
So back to the drawing board.
I installed a previous rom. DCD 3.2.6, and guess what? From initial flash of the phone and initial setup, no apps installed, no hacking, ICS runs and provides a network connection to my mac perfect. I also instantly notice when I pair it through bluetooth, it allows the option of "Access this device as a network port". And "Network Access point" is listed as an offered service.
I installed newer rom DCD 3.3.4, and the MR1 Rom. Neither have ICS installed initially. I can install the two files: intshare.dll and IntShrUI.exe into the windows directory without any reg edits, and then ICS works on the phone, but then pairing the phone to the Mac, and attempting to discover teh PAN service is unsuccessful. It only is discovered as a Dialup Access device, and not a "Network Access Point".
So, It appears I can get internet Sharing via Bluetooth PAN to function on the phone no matter which rom, but have not figure out how to tell the mac, or trick the mac, into thinking the "Network Access Point" service is available.
I have pulled completed registry dumps with CE-Regedit and compared the differences between the two, which there are quite a few, but not sure how to export these differences with the program so I can apply them to the other roms registry. I guess I might try a fukll backup and then restore to the new(er) rom and cross my fingers.
I'd stay with the 3.2.6 rom. and 3.42.50 Radio, with PRI 2.03, but I can only seem to make the GPS function successfully with the MR1 stock verizon rom.
Anybody want to take the two regs files compare, and see if they can find out where we can make the change to have the phone advertise the service "Network Access Point" when being paired to the mac or PC?
On one last note. I also tried the method of restoring the MR1 official rom, and then not allowing the customizations. ICS will function, but again, not advertising the service: "Network Access Point" when pairing, so it's not recognized as a valid networking method.
Where did you get those files (intshare.dll and IntShrUI.exe) to allow ICS via bluetooth?
Nevermind, I found it on PPCGeeks.
Don't know why DCD disabled the BT DUN on ICS.
I use Missing sync, and I turned on PAN then added my phone and it shoed it as a modem when I added it, but my BT connection is fairly Unrealible compared to the USB teather on Bootcamp
i was under the impression that bt pan has been whacked on macbook pro models starting from early 2008 on. anything earlier than that and it seems to work great. does anyone know why bt pan doesnt work on the newer machines and how to get it to work?
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.