Related
Hi guys,
I have a T-Mobile (Wallaby PW10B1). When I inserted a local SIM, it asked me the SIM Unlock code. Currently I don't have the serial cable. I just only have a USB cable to connect to the computer. It has a 32 MB mem card. Here is the specification:
Hardware: PW10B1
Platform: PocketPC 2003
ROM Version: 4.01.16.ENG
ROM Date: 02/04/04
Radio Version: 6.25.02
Protocol Version: 324e4
Can u please help me to Unlock the Pocket PC Phone Edition?
Thanx in advance
Berhane
Please can u help me to unlock the phone.
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
HTH
Stefan
Thanks LumpiStefan for your reply.
Currently I have only 32 MB SD card. I'll find a 64 MB SD card and try it
Berhane
Me Too...
I had almost exactly the same specs as berhane, except I had a 512 card. I installed the xda-special rom and it installed correctly I think ???
But my phone still says it's locked. Did I miss anything.
Here is what I did.......
Programme A did not work for me for some reason so I did the following steps.
1. downloaded xdatools and backed up my old rom.
2. ran osimagetool --register
3. ran osimagetool for source used NK.nbf in english directory for target I used xda SD card and copied the image to the card.
4. held down the on/off button and hit soft reset to get into bootloader
5. bootloader detected rom image and so I flashed rom
6. did a hard reset of xda
I now have the xda-developer special edition rom with the following specs
rom version: 3.17.03 ENG
rom date: 05/15/03
radio version: 6.25.02
protocol version: 324e4
but when I insert try turn the phone on it still asks for a sim unlock.
I had the sim in the xda when I flashed it was that the problem ???
berhane....I think you can get away with a 32meg card because the image is only 15meg in size but I'm not sure.
Re: Me Too...
jodahall said:
radio version: 6.25.02
Click to expand...
Click to collapse
Unlock tool didn´t work with this Radio Version. You have to downgrade it also....
jodahall said:
berhane....I think you can get away with a 32meg card because the image is only 15meg in size but I'm not sure.
Click to expand...
Click to collapse
Image is only compressed about 15 MB uncompressed itts 32,x MB.
Believe me. Flashed about 100 times a new ROM to a Wallaby device....
HTH
Stefan
Hey Guys,
When tried to execute the pnewbootloader command
i.e. c:\XDATools\pnewbootloader bootloader_v5_15.nb0
it prompts an error message " Unable to find flash info offset, cannot
disable bootloader write protect."
What can I do with this error meassage.
Here is my memory Information:
Total Main memory: 31.01 MB (32 MB)
Storage Card Memory: 29.14 MB (32 MB)
What can I do with this configuration
Thanx in advance
Berhane
Try this tools....
HTH
Stefan
Thanks HTH. It works with your new utility
now it goes one step
i.e.
C:\XDA\all-itsutils-050416>pnewbootloader.exe bootloader_v5_15.nb0
Copying C:\XDA\all-itsutils-050416\itsutils.dll to WCE:\windows\itsutils.dll
protection found at 8c0d60f8
but it doesn't say result: 00000000 00000000
Is it okay and continue with the rest of the procedure?
Thanks in advance
Berhane
Yes. You should be able to proceed with the rest of the procesure...
Stefan
Thanks stefan.
The boot loader is changed now. As I mentioned, I only have 32 MB and when I format the SD Memory, I can only use 30.5 MB and the the special ROM file size is 31.5 MB file. I 've got a 64 MB Memory (multimedia memory from Nokia 6230 Mobile) but my XDA didn't recognize the SD memory.
Anyways thank u very much Stefan, I'll find another SD memory and try it.
Berhane
You do not need to format the 32 meg sd card, xdatools will do its own format, I am sure I did an sd rom flash with 32 meg card in the past.
Thanx Cruisin-thru for your reply.
Can u tell me the procedure how to copy the ROM (NK.nbf) with the XDATools
Thanx in advance
Berhane
osiamgetool uses the xdatools in the Background. So just run this file...
Instructions are also available here:
ftp://xda:[email protected]/Wallaby/Tools/XDAtools_Manual.zip
Stefan
Thanx Setefan.
I 've got error message when I tried to copy the ROM image with XDATool.
First , I tried to copy the image file and starts copying, when the 'Time Left: 0:51' it pop ups with this error message.
ITWriteSDCard: The system cannot write to the specified device
Writing osimage: The system cannot write to the specified device
ITWriteSDCard: The system cannot write to the specified device
Is it b/c of the shortage of Capacity of the SD card . (I 've only 32 MB)?
Any Idea?
Thanx in advance
Berhane
Hi guys,
My MDA has only 32 MB Internal memory and 32 MB SD card. With this configuration, am I able to do the flashing process?
Thanks
Berhane
berhane said:
My MDA has only 32 MB Internal memory and 32 MB SD card. With this configuration, am I able to do the flashing process?
Click to expand...
Click to collapse
32 MB internal are no problem. But i'm nearly 100% sure, that your SD-Card have to be bigger.
My smallest one is 64 MB, so i can't test it.
But i've tried a backup of the Magician device, that has 64 MB internal Memory. Backup with 64 MB SD-Card didn't work. Got an error, that there isn't enough space. So i would assume it's the same with the Wallaby and 32 MB SD-Card.
You're Error Message you've got writing to SD-Card comes from that problem.
I would suggest to buy or lent a bigger SD-Card and use this for flashing....
64 MB Cards costs about 10 Euro......
HTH
Stefan
Thank you very much stefan.
I'll try to find a 64 MB SD Card.
Is there any ROM image which is less than 32 MB. (i.e. 15 MB) which has less software just to check.
Thanks you again stefan
Berhane
No. ROM-size is fixed to 32 MB. This depends on the hardware of the device.
Tho Original ROMs, that have the free space, so that we can add our own software in it, have also 32 MB....
Stefan
Thank you very very very much stefan and the rest of the team
I have successfully unlocked my mobile.
I have one question for u.
How can I upgrade the Windows from Special XDA ROM Edition to newer version (i.e. tested and well working with MDA) mobiles
Thanks again
Just the same procedure.
You can do it by flashing via SD-Card (safest way) or using the exe-File.
In my opinion the best ROM to use is the 4.01.12....
Stefan
Hi i recently updated the roms through O2 site everything is fine just i cant seem to install programs ie tomtom or any other cab files???!! can anyone help me. All it does is shows the installation screen with the spinning redblueyellowgreen box and thats it. Im confused why its not doing anything.
Kidd
Rom Ver 2.21.4.1 WWE
Rom Date 3/9/06
Radio Version 02.07.10
Protocol Ver 413.1.03
ExtRom Ver 2.21.4.101
The ROM is screwed up..
try reflashing..
its the memory card. Just brought it from ebay 4gb unbranded. I used a old 512mb card and its fine with that. Its when you activate programs on the card it stops and starts. I already formated the card with windows fat32 that didnt work and the panasonic formatting program. It did work for abit but not anymore. Please help
kidd78 said:
its the memory card. Just brought it from ebay 4gb unbranded. I used a old 512mb card and its fine with that. Its when you activate programs on the card it stops and starts. I already formated the card with windows fat32 that didnt work and the panasonic formatting program. It did work for abit but not anymore. Please help
Click to expand...
Click to collapse
Not sure, but you can try research on the highest capacity a Wizard can take. And, take note of possible scam on high cap unbranded memory cards. E.g. try copying full 4GB contents into the card, just to make sure it is now a scam card.
ok copied up to 3.88 gb of mp3s so its pretty much a 4gb. I stuck the mini sd into a old pda Acer N30 (adapted) and it seems to work fine. Seems like the card is the problem as i have no problems using my old 512mb mini sd. Apparently its a samsung card. Im really stumped.
I recently started having problems in my new Startrek and a with a very new 2GB sandisk microSD.
The phone sometimes can't see the contents of the card Images,Songs..etc .it shows only the thumbnails and file names ,but when i try to open ,edit,rename ..etc
any content of the storage card it gives "UNKOWN ERROR" with a random code.
I have to reboot "soft Reset" for the phone to correctly see the card contents .afer a few minutes , the problem comes back again .
i tried to use different memory cards, anothe 1 Gb microSD card ,and 256 mb microSd Card . But NoWay .. the same Issue ..
Notes :
1- i had installed the latest official rom again on the device .
2- My memory is a fat32 system .
Anyone else faced this problem .. ? any Solutions ?
Please Mates , try to help me ASAP as u can . if it's a Manufacturing issue , i will try to return the device back to the company.
My wishes and Regards,
Eng.Ghazall
that is hardware (Cingular 3125) problem
Oh Really !
are you sure my friend ?
Sorry , but can you tell me what is (Cingular 3125) " ?
Thank you So much my friend , So that i have To Get a new one "replace" from the Manufacturer ?
because it is dead..
Thank you so much Mr.Expert
My Regards.
Ghazall said:
Sorry , but can you tell me what is (Cingular 3125) " ?
Click to expand...
Click to collapse
Oh, sorry, i mean a StarTrek. Cingular 3125 is an american version of StarTrek.
btw, my brother have your problem with his startrek (with Kingston 2gb microsd card) too. thats hardware problem. But my startrek (with 2gb SanDisk microsd) works good.
Hi Erofich ,
thanks alot for your Nice reply ,
after reading too much threads and googling the problem , i discovered that this problem from the place of the memory stick "hardware problem"
so that i but a slim paper between the SIM card and the memory stick to press the memory into inside and make it stable in the place . i did that from 4 hours , and it is still Works Great Till now.
anyway , i will return back my device when i come back to my home country ..it's still under warrenty !
Thanks all Guys.
My Regards.
Thanks Ghazall, I put 1 small piece paper between memory and sim card, it's work well. till now my kingston 2gb memory card is readable.
Hi guys,
I bought a used Nike that worked very well with its Niki Project 2.1.3 ITA.
Suddenly, with no apparent reason, I can't see the micro SD from File Explorer anymore.
I tried to change ROM (Lilly 1.6.1 Manila, original HTC WM6, Niki Project again), radio (1.58, 1.65, 1.71), SPL (from 1.12 to 1.22), in any combination of those, but nothing. Moreover, I formatted the micro SD FAT 32 and FAT 16 on a PC, and tried different sizes of cards (from 256MB to 2GB) and manufacturers, but the micro SD peripheral seems definitely dead.
Please, help!
Thanks.
realtape said:
Hi guys,
I bought a used Nike that worked very well with its Niki Project 2.1.3 ITA.
Suddenly, with no apparent reason, I can't see the micro SD from File Explorer anymore.
I tried to change ROM (Lilly 1.6.1 Manila, original HTC WM6, Niki Project again), radio (1.58, 1.65, 1.71), SPL (from 1.12 to 1.22), in any combination of those, but nothing. Moreover, I formatted the micro SD FAT 32 and FAT 16 on a PC, and tried different sizes of cards (from 256MB to 2GB) and manufacturers, but the micro SD peripheral seems definitely dead.
Please, help!
Thanks.
Click to expand...
Click to collapse
Flash the official HTC WM6.1 ROM. It will give you the best idea if there is a fault or not. It will update the SPL to 1.22, radio to 1.65.28.25 and ROM to 6.1
Link:
http://www.4shared.com/account/file...2094051_Radio_NikeMR_1652825_signed_Ship.html
(re)flashed the official HTC 6.1, and also your Phoenix 2.41, both followed by a hard reset: micro SD still missing!
(BTW: I'll take Phoenix, that is fast and very nice!)
Have you tried formatting it in RescoExplorer?
realtape said:
(re)flashed the official HTC 6.1, and also your Phoenix 2.41, both followed by a hard reset: micro SD still missing!
(BTW: I'll take Phoenix, that is fast and very nice!)
Click to expand...
Click to collapse
After changing ROMS and MicroSD cards, and the SD card still missing, then this could be a hardware failure...
Hi All - I tried to make a goldcard for rooting my HTC Hero (Three UK with latest ROM) over the weekend, but had no luck - it seems the memory card I own (an 8gb Kingston card from ebay, so may be a fake) doesn't work.
Can anyone recommend a memory card brand & size that will *definitely* work for creating a goldcard?
Thanks for any help
The 2GB one that is packaged with the phone works fine.
harroguk said:
The 2GB one that is packaged with the phone works fine.
Click to expand...
Click to collapse
+1. The stock 2GB one is a known good one. Kingston 2GBs also supposedly work, but I can't personally vouch for it (never had to use one in anger- my phone came with HBOOT 004)
my stock sd doesnt work
I know it doesn't address the goldcard issue, but try these updated instructions to flash a custom recovery.
http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/
Follow the text instructions mainly - treat the video as a rough reference.