Hi.
here is a Format failed solution to test for you guys.
It is a first Idea and not final. I'll write a script and repack it if it works.
Here is how to do it:
First you need the NoID RUU to flash the ROMs.
You can get it here: http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
Then you first have to flash the Charmer Aku 1 with the NoID RUU.
You can get the Aku 1 here: ftp://xda:[email protected]_1120223_11202110_11220_T-MobileUK_Ship.rar
After that you have to flash the Prophet Aku 2 with NoID too.
Get it here: http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
The final Step is to reflash the Aku 3 alst to flash with NoID.
Get it here: http://www.tm-phonedownloads.com/files/RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
After that all your Charmer should Format and boot again.
To flash a ROM with the NoID tool you have to copy the NK.nbf from the ROM folder to the NOID folder.
The Aku3 has to be extracted first. (Use WINRAR or SevenZIP and extrackt using context menu). Don't run it it won't extract it will start flashing!
Hope that works for all!
Hi, I tried to flash Charmer with AKU3 NOiD utility, but I stucked at this:
http://img268.imageshack.us/img268/1291/****y.png
I don't see, what I'm doing wrong. I added nk.nbf file to NOiD folder, that you have sent me and this showes me after I clik on update...
OK I read about the problem. Try the Aku3 in your Language or try the German one.
If both don't work I'mm make you a custom version of noptures WM6 with bootloader included so that you can use that to get the loader up again.
And next time don't read old howtos or read them to the end. In one post Vlodec says that CID unlock isn't needed.
You should have read that and all would be fine now.
Ok ChrBeck, i will smarter now...
And back to my Charmer. I tried German AKU3 but the same problem was shown...But it still work with AKU1, so It's not been absolutely damaged yet.
I tested the german Aku 3 here. When does the problem show up? After klicking sometimes or directly when opening the utility?
ChrBeck said:
I tested the german Aku 3 here. When does the problem show up? After klicking sometimes or directly when opening the utility?
Click to expand...
Click to collapse
When I open the noid utility, click next, next, the program starts searching my device. When it searches it, I click on "update" and the next page is "error [238] : File read" as i wrote in the last post.
Hi!
Try to copy all the files to C:/ ,so to the root directory.I read something about it years ago,it worth a try.
The readme file in the RUU says:
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
I can't see the logic of this sentence.If the ROM image is corrupt ON THE PHONE(????) then why should I download the RUU again?It's not clear for me,I hope it's just because I don't speak english too well.
So i tried this (copy all files from RUU to root of my pc), but noting has changed...still "File read"... Now I'm flashing AKU1 ROM to get device back working...
I have an idea. Try to flash vlodecks Rom with that NoID RUU I gave you.
If that works I'll build you a pachted WM6 with the SPL and so on in soon so that you can upgrade. Would you test that for me?
Thanks
ChrBeck said:
I have an idea. Try to flash vlodecks Rom with that NoID RUU I gave you.
If that works I'll build you a pachted WM6 with the SPL and so on in soon so that you can upgrade. Would you test that for me?
Thanks
Click to expand...
Click to collapse
Anything you say So i'm going to flash this ROM (http://rapidshare.com/files/32068816/charmer_wm6_vlono_001.1.zip) from http://forum.xda-developers.com/showthread.php?t=305125&highlight=vlodecks+rom .
I think, i flashed it one time and it's just worked, but for absolute certainty...
Once more I'd like to thank you for all you do for me...
No problem. As you are the only guy with repucable Format failed fix I'm very interessted in helping you to get that thing fixed for ever.
If the ROM works I'll give y a pached nbf. We'll see how it goes and if it works I'll take it for my Fix package too.
So here is some screens from WM6:
http://img199.imageshack.us/img199/6502/img1779e.jpg
http://img31.imageshack.us/img31/3556/img1778tw.jpg
Hope it says you something...
IPL & SPL is stil 1.12...
OK it tells me that I'll try to get a patched Version ready this week. Hope we can get it done. Have you flashed it with the included NoID tool or with the one I said?
ChrBeck said:
OK it tells me that I'll try to get a patched Version ready this week. Hope we can get it done. Have you flashed it with the included NoID tool or with the one I said?
Click to expand...
Click to collapse
With the one included in the ROM... With no problems..
Ok so I'll make a pached soon. Have you tried to flash the Aku3 with the Tool included in the Wm6 one time too?
ChrBeck said:
Ok so I'll make a pached soon. Have you tried to flash the Aku3 with the Tool included in the Wm6 one time too?
Click to expand...
Click to collapse
Yes, but the NOiD RUU stucks in "FILE READ" error... I've uploaded the screen here...
Also the one that came with the WM6? Strange! Are you sure the file is called nk.nbf and is around 70MB big?
Here is the screen from the folder, where im having the vlodeck's ROM:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OK. But I was refering to flashing the Aku3 with the NoID tool. Where was your file then and how was it called?
ChrBeck said:
OK. But I was refering to flashing the Aku3 with the NoID tool. Where was your file then and how was it called?
Click to expand...
Click to collapse
I don't understand your post, but if I'm right so - The nk.nbf file in the screen is extracted from the AKU3 Deutsch ROM
PS: I'm sorry, but I must go learning. I'm going to write lots of exams tomorrow. I hope, i'll be here tomorrow evening or at the weekend... I'm sorry
Related
Hello,
I have a G3 with Underground WM6 rom. i upgraded IPL/SPL 3.08, and now it is stoped in the boot screen. I downgraded to the rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE for down the IPL/SPL but it's only down the IPL. SPL always 3.08
Please help me ASAP
Thank you so much.
RClub said:
Hello,
I have a G3 with Underground WM6 rom. i upgraded IPL/SPL 3.08, and now it is stoped in the boot screen. I downgraded to the rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE for down the IPL/SPL but it's only down the IPL. SPL always 3.08
Please help me ASAP
Thank you so much.
Click to expand...
Click to collapse
First of all if you have a G3 why are you posting in the G4 subforum?
Why do you need to downgrade the SPL? Aren't you already CID unlocked, according to your post you have a custom rom installed?
You could try to flash a FULL Official Carrier rom to try to overwrite your bootloaders with an older version. Don't know if there are commands disabled in the new bootloaders to prevent this from happening though.
As long as you can get to the bootloader your phone isn't dead. Whenever this happens to me I always recover to an official carrier rom then proceed to the custom rom of my choice.
Sorry,
I think downgrade SPL for compatible with official rom (O2 2.21), i trying it but now i cant upgrade this rom
it is still in the bootloaders, so i know my G3 isn't dead
here it is, silent...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Please save me...
tell me, if hard reset tells you format failed.
nothin said:
tell me, if hard reset tells you format failed.
Click to expand...
Click to collapse
Yes, i'm sure. I make hard reset and it reports format failed
i found method for this, its used with G3, so we need confirmation to be sure, if it may help you too.... it "shouldnt" be dangerous...but better wait for reply of masters here...i saved my machine with that one...
my english is so damn poor...forgive me,please...
method:
-you need to format sd card to fat16(fat)
-kill wcescomm process from task manager on pc,
-find program named romupdate.exe, or mtty.exe
-go into bootloader mode, and plug wizard on usb,
-find in options of mtty(romupdate.exe) port, choose \\.\WCEUSBSH001
-now, press enter on main screen of mtty(romupdate),
-on >CMD type r2sd - it will make special header(and copy of os too, but its less important) which may help to make format with other method,
-wait 'till process ends,
-softreset pocket to get into bootloader mode...and do what machine says, its other method for format, when it ends, it "may" boot normally after softreset(you may try to do hard reset to confirm), even if it is not booting, format will let you to flash once more.
if it is stuck on bootscreen again, find info about rescue flash, now, it should be possible after that "format". If hard reset says "format failed" you wil not be able to flash anything - if it is not, you may do wantever you need, so try to flash wizard love, then any ROM with shelltool(yup yup its not typical for g3, but for me its ONLY method)..
i am not sure, if its useful..i saved one machine by that method...
Thank you Nothin,
I take your solution and its reports in the cmd>
"***** user area size = 0x1EC80000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image"
...the phone is cid locked
i must go to imei-check?
damn, i was hoping you will not see this damn thing
btw command to mtty is: r2sd os ...
i am not sure what now..
try to RUU dopod ROM, maybe what is able to be overwritten will lead you to use mtty r2sd os ....
http://pda.oleyek.com/ROM/Others/RUU_Prodigy_1070302_103_10703102_CMCC_CHS_Ship.exe
it is known as CIDlock remover... , do not ak me, if it works... i flashed this and mtty method was usable for me...
btw i have identical machine as you, i think.
strange, that old users arent trying to help, they surely know 100% methods.. ..... :S
maybe you need such topic inside wm06?
btw, mtty method is linked to awizard info, so maybe this link will be useful...
http://forum.xda-developers.com/showthread.php?t=258819
Hi Nothin,
i updated this ship rom dopod, now the os is 1.7.13.3, ipl 1.07, spl 3.08 , gsm 01.13.10
but i cant use mtty.exe, it reports same answer
any ideas?
thank you Nothin
i am trying to get info about that... but i must wait for replies on other forum....
i wish i could help
i am wondering...damn where are the others...whole forum is asleep?
have you tried flashing official ROM for o2? then mtty?
i am interested in solving that problem - it may be helpful knowledge...
upd: tell me, how did You format card (fast format, normal)?
it may be difference with format method. Do slower, normal format of sd, then try mtty.
and it MUST be fat 16.
of course, remember about activesync kill etc...
upd...
overall conclusion is imei ....
you probably read that topics...
http://forum.xda-developers.com/showthread.php?t=276963
http://forum.xda-developers.com/sho...evel+to+download+a+specific+image#post1282309
Nothin,
it's very strange, the phone is O2, but i cannot flash the ship rom O2 Xda_MiniS_LaunchROM_v154102 and Xda_Minis_Upgrade_v2.21.4.101 nothing.
Yes, i format the SD card in normal mode, and choose FAT(FAT16). I'm sure i killed activesync, for find \\.\WCEUSBSH001 in the port on mtty
If we havent other way, i'll go to imei-check.co.uk
TY
I have some trouble too
wait for few hours..there "may" be method...
womchik , method with mtty did not help? same "format failed/not enough permission?
yes
I tried 3 miniSD card
I have lock_backup.bin and cidunlocked.bin files. Is it helps me?
Uhm ... ahm ... snurt!
3.08 SPL/IPL are bad Converted from Charmer. If you Flash your Phone with this Firmware ... your Phone think its a Charmer!! No Original Vendor Firmware works with this SPL Version.
I have reflash a old SPL Version via imei-check.co.uk but i have a G4 Prophet. Try to use IMEI Unlock for Charmer ... and hope it works if not talk with imei-check.co.uk. They have a Special Updater and they Flash a Old SPL for you.
Charmer unlocks with lockwiz/aWizard ?
BootScreen is no need for unlock ?
Or may be I'm wrong ?
Try it ... i have a G4 and no CID Unlocker works on it ... this is why i only can say ... if you cant fix it ... talk with imei-check
try what? lockwiz? I tried unlocking in bootscreen many-many times
may be I can upload cidunlocked.bin back to device?
NetrunnerAT said:
I have reflash a old SPL Version via imei-check.co.uk but i have a G4 Prophet. Try to use IMEI Unlock for Charmer ... and hope it works if not talk with imei-check.co.uk. They have a Special Updater and they Flash a Old SPL for you.
Click to expand...
Click to collapse
Can you tell me more details,please?
Thank you
Hi all
I was sick waiting for cid unlock for (t-mobile ameo – dutch),
So I used modified tools from http://forum.xda-developers.com/showthread.php?t=299154
to force writing Windows.nb ,just changed the bat file to write the new OS and it worked, my Athena now has English OS from RUU_Athena_HTC_WWE_1.25.405.2_1.38.00
the modified tool is here
http://www.aczua.com/Athena_upgrade.rar
(use @ your own risk)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
sorry not yet, needs the wm6 XIP but wm5 cooking can happen
can this remove the sim/network lock as well?
So then the question is: What is the best ROM out there... the AMEO, Dopod or HTC?
lawbet7eb, can i first thank you for the doing this for the ameo/dopod/advantage communities. Could you please inform me or point me to the correct link which will show me how to use this tool, thank-you.
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
Thanks for the link fallenczar. This is great news indeed. Is this now officially CID unlocked? Or just a way of forcing a flashing of another ROM?
CAN U please provide with more deatils of how did u do it !!! we all appretiate it hoop that u can say how to upgrade to english waited something like this for a long time THANKS ALOT !!!
Its NOT Cid unlocked, it uses some utilities by itsme to write directly to the NAND flash that the OS is stored in
Is it possible flashing the device fromout the bootloader screen? Or must the device be connected en synched using activesync?
Regards
Vince
Can anyone modify the files to flash radio..I know that if we flash POF's 1.16 Radio of Hermes, it makes the device Super CID..
Tried, but doesn't work...pls others post the results
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
hdubli said:
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
Click to expand...
Click to collapse
what do you mean by great discovery?..do you manage to flash the radio?
you cant flash radio like this.
Can someone add the procedure to the wiki and does it mean that now i can flash my english ameo with a unbranded htc athena rom ?
Take it easy friends...it needs to be safe for all to use..
Guys I'm all for progress and this going in the right direction, but it is NOT properly CID unlocked. Be very careful peeps before someone bricks their device!
This is why we have set up the Athena project, to avoid this and get some pro's to help us.
I hope everyone agrees that Midget_1990 should be on board as he is experienced with ROM cooking and the likes for the VGA 3G Universal and is the only xda developer who has showed an active interest in our forum.
if you read the link from arti upgrade you will get the picture,
it could be risky to force OS with this procedure as we all know that there is a problem with athena cutting connection, read this:-
http://forum.xda-developers.com/showthread.php?t=298259
if athena cuts and upgrade was not complete, u can reflash with original rom.
another thing, this upgrades only the OS, not radio, ipl spl...etc, AND IT WILL NOT MAKE ATHENA CID-UNLOCKED
i believe we all should join The Athena Project @ http://forum.xda-developers.com/showthread.php?t=311651
there is nothing like SuperCID Athena
I heard from somebody that there was a way to CID unlock an Ameo with the old original radio ROM from T-Mobile. You had to flash back to an early Radio, then you could remove CID lock (or the early radio didnt have a CID lock in it). Then you could flash a normal Athena Radio back into it. He was vague about it but promised to email me the full procedure. He never did.
Is this worth looking into?
thanks to lawbet..now i have a full english version rom...
i first attempt was stucked..but then tried again using hdubli instruction...i`m happy right now untill we get cid unlock...
cheers..
OxyGrey mod WM5ROM by serrrios (ENG/RUS)
---------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://serrrios.narod.ru/Capture_1.gif
---------------------------------------------------
In my rom:
Registry is unlocked
Celetask (only RUS(i don't have eng mui)) on key HOME
WM5Torage
OmapClock, CPU clock after start is 216mHz
Esmertec JBED(fullscreen, JSR-75) with Opera Mini Mod 2.06test (RUS)
NetCF2.0
Tornado PowerControl
SoftReset on ShortCAMERA
---------------------------------------------------
Install:
First install Hard-SPL.
Then install rom with "ROMUpdateUtility"
---------------------------------------------------
Download:
http://rapidshare.com/files/79421277/ROM.zip.html
---------------------------------------------------
Big thanks to dimon-kaz and Alex [DFR]
wm6
Hi. Put a make wm6 and wm6 rom coocking this device. What tool use for coocking this rom. thanx
Excuse me for my english, i, ve installed this rom, how i can install italian language? thanks
gioiellino said:
Excuse me for my english, i, ve installed this rom, how i can install italian language? thanks
Click to expand...
Click to collapse
Add to registry:
[HKEY_LOCAL_MACHINE\MUI\Available]
"0408"=" "0410"="Italiano"
and add files from archive to folder Windows on phone.
http://rapidshare.com/files/79773159/itall.zip.html
It's not full italian language pack, and i will not add it in rom, because it have large size.
Geo2000 said:
Hi. Put a make wm6 and wm6 rom coocking this device. What tool use for coocking this rom. thanx
Click to expand...
Click to collapse
I can't load core wm6 on oxy. I use Imgfs tools(BuildImgfs.exe, make_imgfs.exe), htcrt, NBHextract and RGUEdit from 4pda.ru
You put make wm6 for oxygen and wm6 compatibile this device.
thank'you very much!!!
and which files i must delete to delete russian language to free more memory?
_
wm6: if you have only os.nb from wm6 os, we can bulding a new rom with htc rom tool and put IPL, SPL, SPLASH and RADIO from WM5 and only OS from WM6 and try if WORK. it is possible?????
gioiellino said:
thank'you very much!!!
and which files i must delete to delete russian language to free more memory?
Click to expand...
Click to collapse
Del all files with *0419* in name.
gioiellino said:
wm6: if you have only os.nb from wm6 os, we can bulding a new rom with htc rom tool and put IPL, SPL, SPLASH and RADIO from WM5 and only OS from WM6 and try if WORK. it is possible?????
Click to expand...
Click to collapse
It is not possible, becouse i can't run wm6 core.
If you can do it, I will very thanking))
Serrios what wm6 work coocked for this device? Wm6 for vox not work?
wm6
i try bulding a rom with a os wm6 but during flash a window error says that the file is corrupted. i need a rom wm6 feerer already dumped in nb format and i can try later. post me a dumped nb rom wm6 feerer because it is the must similar a oxygen rom
Geo2000 said:
Serrios what wm6 work coocked for this device? Wm6 for vox not work?
Click to expand...
Click to collapse
First, need load the core wm6. I can't it start.
gioiellino said:
i try bulding a rom with a os wm6 but during flash a window error says that the file is corrupted. i need a rom wm6 feerer already dumped in nb format and i can try later. post me a dumped nb rom wm6 feerer because it is the must similar a oxygen rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=326312 look this.
i have flashed with all wm5 and only os wm6. the flash start and arrived at 100% but a window message says flash error and when i reset the smartphone dont work it is stopped after htc logo.
You worked with pkgtool? He is not work ready. Use imgfs tools.
wm6
ok now i try. i have used dumprom to dumping wm5 and wm6 rom. then i bulding with htc rom tool and flashed whith hardspl
Hope you will share your succes friends
I am watching your discussion about wm6. Hope you will let us know how to make it, when you will find out
p.s.
Is there any place where I can find an original ROM for Oxygene? I have put a test one, but I want to get back. Would somebody send me that ROM please?
Best greetings,
RA
Do I need...
serrrios said:
Del all files with *0419* in name.
Click to expand...
Click to collapse
Do I need to delete that files after instaling that ROM, from smartphone?
Or should I delete it from ROM image, using special tools (wyhat tools if yes?)
Best greetings,
RA
P.S.
Maybe you Sir would help me with sending an origina HTC ROM for this phone?
serrrios said:
OxyGrey mod WM5ROM by serrrios (ENG/RUS)
Click to expand...
Click to collapse
I am tring to put this ROM info my Oxygene, but after about 5% of loading I get a message: image file is corrupted'. What could happend?
Best greetings,
RA
radio UPGRADE 4.1.13.44_02.94.90
OxyGrey mod WM5ROM by serrrios (ENG/RUS)
now i have update GSM to 02.94.90
flash with hard spl !!!
http://rapidshare.de/files/38192979/NEWM5.rar.html
abramq said:
Is there any place where I can find an original ROM for Oxygene? I have put a test one, but I want to get back. Would somebody send me that ROM please?
Click to expand...
Click to collapse
Not exist online. Only service center.
abramq said:
Do I need to delete that files after instaling that ROM, from smartphone?
Click to expand...
Click to collapse
after instaling
Windows Mobile 6 AKU 0.5.0 (5.2.1711 Build 18165.0.5.0) WWE v5c
So, after a half year we have a working WM6 for your devices.
All thanks to:
- pArtizAn aka Erofich (me) - WM6 author
- Alex[DFR] aka sp3dev - my teacher and co-author) thanks you SOOOO much
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Strik3r - he made a working WM6 XIP
- Chymmylt - WM6 tester, THANK YOU Chy, you are the best!
- ALEUT - some help with settings panel
- Mo3ulla - thanks
WM6 boots 2x faster than latest official cingular rom!
New v5c have made a week before with not working GPRS, but with working Settings' applets
Changes after v5b:
1) Office 6.1 added
2) its possible that storage increased
3) russian language added, select in settings
4) working Green and Home buttons
5) its possible that Jbed 3D Java added
6) Answer Mode and External Screen settings added
7) ArcSoft MMS added
8) HTC Home added
Known issues:
1) GPRS doesnt work
How to flash:
1) make an application unlock
2) copy content of SSPL to root of your device
3) run SPL.lnk
4) run ROM Update Utility.exe on your PC
5) follow the instructions
6) wait until flash process will be completed
You can flash it over ANY (Qtek, Dopod or Cingular) rom!
I dont have a HTC StarTrek
If you wanna to use this rom or part of it (i.e. XIP, etc) for the base of your future roms, please keep/add author's names in About menu! Thanks.
Download:
Discontinued. Use my WM6.1 V7b - its better!
WM6 discussion in Russian: http://4pda.ru/forum/index.php?showtopic=68882
Great work! Thanks for all your hard work Erofich!
Wohaaaa!Cant wait to have Crossbow on all my devices...thank You!!!!!!!!!!!!!!!
It's hard to believe! StarTrek with wm6!
Thanks, thanks, thanks gays. Great job!
nice job, guys! But I have 2 questions:
1) Will this work on any STR TRK? Or does it work only with STR TRK with certain ROM (i.e. Cingular)?
2) Is this the final ROM, or will this continue developing?
Thanks again, NICE JOB!
1) Chy will test it
2) yes, its a final rom, because of i can't fix a lot of possible little bugs without having this device
@Erofish
How to flash:
- make a reg unlock
- run a SoftSPL - http://4pda.ru/forum/uploads/img-65469-star.rar
- run RUU on your PC
- wait until flashing will complete
Click to expand...
Click to collapse
Sorry,
Could any one explain me the point 4:
"Run RUU on your PC"
I don't found this app in img-65469-star.rar .... When I unzipped it...
Thank's you so much
WM6 rom will contain RUU in same archive
Congradulation on the release erofich - great work - you're amazing!!!
get it! =)
What does this all mean
How do I flash the ROM? How do I load WM6. Can someone give me detailed instructions please.
?
How do I install this ROM? I don't understand what the instructions are saying,can someone post how to install the ROM?
Help
So how do I get to the SSPL, I don't see any folder availablle for download?
Nevermind
Nvm, I forgot you use winrar to open .rar files. WM6 is up and running, ty very much.
Make calls
So how do I make calls without the use of the green button?
Work great on my qtek 8500! VEry fast! Thank you
"So how do I get to the SSPL, I don't see any folder availablle for download?"
How to flash:
1) make a regunlock
2) copy content of SSPL to root of your device (Go to directory SSpl, select all files and copy to the root of the phone.)
3) run SPL.lnk (Go to the root (with the phone) and start the spl.link file.)
4) run ROM Update Utility.exe on your PC
5) follow the instructions
6) wait until flash process will be completedThe folder is in the pack...
fantastic work!! I love you guys!!
Regunlock...?????
I am newbie; and I am so exiting and anxious...
I want to try my first flashing rom. If I refer to some posts... It's... "Easy"
Can someone give me detailed for instruction Number One, I think the other five points are all right.
How to flash:
1) make a regunlock
2) copy content of SSPL to root of your device (Go to directory SSpl, select all files and copy to the root of the phone.)
3) run SPL.lnk (Go to the root (with the phone) and start the spl.link file.)
4) run ROM Update Utility.exe on your PC
5) follow the instructions
6) wait until flash process will be completedThe folder is in the pack..
Click to expand...
Click to collapse
Regunlock It’s application ?
If it is, where I can found it ?
I found a bug. Please confirm if this happens generally.
The StartUp content doesn't load at system boot. This means that any program' s shortcut is in startup folder doesn't run automatic when wm6 start.
Maybe this can be fixed with a registry setting, but I don't know how. I tried with HKLM\System\Explorer\Shell Folders and I saw that every folder definition was 2 times and if I delete the one of them, both desappear. I made the startup definition again but no luck. Any help or suggestions?
Ricoroc said:
I am newbie; and I am so exiting and anxious...
I want to try my first flashing rom. If I refer to some posts... It's... "Easy"
Can someone give me detailed for instruction Number One, I think the other five points are all right.
Regunlock It’s application ?
If it is, where I can found it ?
Click to expand...
Click to collapse
Before you proceed with flashing rom the device must be cid unlocked. There is a thread in startrek's forum for how to do it.
i use this rom
http://rapidshare.com/files/4297231...57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i got this error 262
i am new user ... and its my fst time to update any PDA set so if possible then i need some info step my step thanks to all
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Make sure you are using either USPL or HSPL as well
already soft rest the set and do again try but same problem again and again
now my set in boot mode and show these words
HERM100
IPL-1.03
HERM100
SPL-1.40.01ipeo
need full info about this problem step my step
Try saving the nbh to you're storage card as herming.nbh and flash the stock rom this way... then try updating you're rom again.
Fallen Spartan said:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Make sure you are using either USPL or HSPL as well
Click to expand...
Click to collapse
joshkoss said:
Try saving the nbh to you're storage card as herming.nbh and flash the stock rom this way... then try updating you're rom again.
Click to expand...
Click to collapse
thanks for replay if u gave me step by step info then its better for me
i read something here about NBH file
http://wiki.xda-developers.com/index.php?pagename=Hermes_PreproductionVersions
so where is the NBH file if someone have then share here the link
I wish you guys would do a little reading...
The flash file consists of 2 files, the RUU_Wrapper.exe and the RUU_signed.NBH file.
If yours is just an exe file then use winrar to extract the 2 files.
You also need to have Hard SPL V7 installed, if you dont then go to last paragragh......
1. Format a 2Gb or less sd card FAT32. Copy .nbh file to it.
2. Rename to hermimg.nbh. Insert into Hermes.
3. Reboot into bootloader/tri-colour screen.
If you have done everything right, follow onscreen instructions. If not then go through again, step by step.
If this doesn't work, drop kick your Hermes into next year cos it isn't gonna be fixed without a LOT of reading and I quit here....
ultramag69 said:
I wish you guys would do a little reading...
The flash file consists of 2 files, the RUU_Wrapper.exe and the RUU_signed.NBH file.
If yours is just an exe file then use winrar to extract the 2 files.
You also need to have Hard SPL V7 installed, if you dont then go to last paragragh......
1. Format a 2Gb or less sd card FAT32. Copy .nbh file to it.
2. Rename to hermimg.nbh. Insert into Hermes.
3. Reboot into bootloader/tri-colour screen.
If you have done everything right, follow onscreen instructions. If not then go through again, step by step.
If this doesn't work, drop kick your Hermes into next year cos it isn't gonna be fixed without a LOT of reading and I quit here....
Click to expand...
Click to collapse
thanks for replay where is the nbh file where i get it
ultramag69 said:
The flash file consists of 2 files, the RUU_Wrapper.exe and the RUU_signed.NBH file.
Click to expand...
Click to collapse
Read the posts.....