Related
ok my phone is HTC 8525, with WM 6.1 professional . It worked fine for 3 days then it start freezing , before it does that a blue background will appeare ,then it will not let me do anything at all . When I try to touch an icon, it will say something like invalid location or could not find target . I have to hard reset it. sometimes I have to reset it 4 or 5 times a day . , In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ? please help me I truly appricat it . In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ?
Hmmm, "the mini card will freeze the whole phone"??? Are you referring to the SD Storage Card? Do you have any volatile data stored on the card? Any Today Screen Applications?
If this is the case, try shutting off the phone and removing the card. Then place the card into a card reader, and plug it into your PC. Make a folder on the desktop of your PC, and COPY all the contents of the SD card to the folder.
Now, reformat the SD card in your PC, as FAT32, and default for all characteristics.
Once reformatted, copy all that stuff back onto the SD card from the temp folder on your desktop, making sure everything is returned to it's original locations. Pop the SD card back into your phone and see if it's fixed. Sometimes, corrupted space on the SD card will make the phone behave very badly. Hopefully, this procedure might fix it for you.
-pvs
Yes Sir, i apaologize , i was refering to the SD card . i am just tierd resetting the phone every 4 hrs . do you recomend any shops that can fix the soft -ware . i notices when i start the phone and i go to clean tmp it will say" 8 Fils and 4 folders of 656 Bytes cleard ! . then 5 hrs later the blue screen comes back
After doing what pvs said, and if you still have problems I'd check for bad blocks with MTTY... I would also ,after confirming no bad blocks, would flash a stock rom then reflash wm 6.1 and see if that helps... Cheers...
Wow , how to do all that if you dont mind me asking , actually i took the SD card out i am not in need for it at the moment . can you please help me to do what you said and i truly appreciat it , Great thanks for both of you gents
pvs already says what to do in his previous post...
To check for bad blocks follow this : http://forum.xda-developers.com/showthread.php?t=377389
To Flash a stock rom you need to know what carrier the phone was on. Download the wm6 update from their site and, Making sure you have Hard SPLed your phone, I suggest flashing via the sd card method. Its safer than flashing through pc.
Format sd card fat32. copy .nbh file of the stock rom (you may have to search for it) onto the sd card and rename to "hermimg.nbh". Put back in hermes and reset to bootloader (power button, OK button above flywheel and soft reset with stylus. Hold all buttons until it goes to tri-colour screen). It should recognise the os flash and load up a screen showing 1st boot screen, 2nd boot screen, gsm And os (or something like that as cooked roms don't generally have the gsm part). MAKE SURE YOU HAVE AT LEAST 50% BATTERY!!!!! Follow the prompts... I generally use the sd card method to flash ALL my roms so I don't have problems like usb disconnecting or pc rebooting/hanging or power failures.
Hope this helps you out, Cheers...
BASELABBAS ... Please describe what you are doing when you say that you are "HARD-RESETTING" several times a day. Are you:
1) poking the stylus into the hole at the base of the unit?
- or -
2) holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]?
If you are doing the first ... this is called a SOFT reset. The second is a HARD-RESET, and will wipe the phone clean of ANYTHING outside of what came with the ROM itself.
Since you have posted that you already removed the SD Card from the device, and can (for the time-being) live without it, I recommend you do an ACTUAL Hard Reset (backup anything you need to keep first) via step #2 above, and then be patient about installing any apps. I wouldn't do anything more than sync it up via ActiveSync with your contacts for the first few of days. If things start to go crazy without any third-party apps installed, then I would look into the steps that ultramag69 has suggested ... starting with a flash to a stock ROM.
WM6.1 has been a bit shaky on our Hermes thus far. Some people are getting good results, but a lot of others are having issues like you are describing. I would suspect that your ROM might not be a good match, before I'd suspect bad blocks at this point (and it's a bit easier to test for).
If the stock rom does better on your device, you can try flashing back up to a WM6.1 ROM after that. And if you haven't already, make sure that you have installed HARDSPL before doing any of this stuff.
Good luck,
-pvs
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]. I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
it looks like i need to update
this what is say
From :
Image Version : TNT.19199
to
image version 2.05.255.1
BASELABBAS said:
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR].
Click to expand...
Click to collapse
OK, well that's definitely a Hard Reset. So your WM6.1 Rom is acting flaky right aftwerwards, eh? I would say it's time to try a different ROM, as we've been discussing above.
BASELABBAS said:
I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
Click to expand...
Click to collapse
No ... try Hard-SPL-V7.zip found at the bottom of THIS PAGE. I THINK you can flash it via the SD method if ActiveSync isn't working for you (if not, somebody please correct me). To do this, open the downloaded ZipFile with WinZip or WinRAR and copy the file inside named RUU_signed.nbh to your desktop. Rename it HERMIMG.NBH, and copy it to the root of your freshly reformatted (FAT32) Storage Card. Put the Storage Card into your device and press the side OK button and the power button simultaneously while resetting with the stylus until the tri-color screen appears and turns white. The device will find the HERMIMG.NBH file and offer to upgrade by pressing the Power Key. This will install HardSPL onto your device without the need for ActiveSync. You can also flash ROMs in this manner.
Again, good luck,
-pvs
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
ultramag69 said:
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
Click to expand...
Click to collapse
Thanks for checking me on that, Ultramag. I had a feeling there was something I was forgetting.
-pvs
Hello all i traied to upgrade my tytn's rom for a cooked rom download from here(HTC_HERMES_S64_WM_6[1].1_TouchFlo2D_UC_V3_WWE_02.10.2008 and V8B1_Manilla2d)
but after it verifaid my info and try to syncronize again, i get an error and it can not syncronize.
what can it be the problem it's open a solve problem wizered and tell me to connect the usb connection again and to remove the battarey...but all of that dont solve it
PLZ help me.
On your Hermes go to settings>system>about>Device Id. Change the name to what your Active Sync id is. It should sync up with no problems...
ultramag69 said:
On your Hermes go to settings>system>about>Device Id. Change the name to what your Active Sync id is. It should sync up with no problems...
Click to expand...
Click to collapse
but it was the same name
as it in the Active Sync
the page that i get is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry, misread post.
1st thing, If you have Hard SPL v7 installed (hold power, OK button above flywheel and reset with stylus. Hold in until you get to tricolour screen. If you have Hard SPL V7 then the SPL will be 2.10 olipro) you can use the sd card method. This is my preference as there are no "sync errors", EVER... Also its harder to screw up the flash as the only way is to reset in the middle of a flash or have the battery die.
To get Hard SPL go to this thread - http://forum.xda-developers.com/showthread.php?t=296722 . Post 1160 on page 116 tells how to use sd card to flash Hard SPL.
Once you have Hard SPL.....
1. Format an sd card fat32. Copy the .nbh file from the os you want onto the sd card and rename to "hermimg.nbh".
2. Put sd card into Hermes and reset into bootloader (how to find out what SPL you have as above). It should recognise the Flash file and tell you to push the power button to continue if you haven't messed up the first step.
3. Follow the instructions...
Please remember to backup your contacts first though with Pim backup or SPB backup or you will loose them... Before formatting the sd card make sure to backup this on your pc too... Also make sure you have good battery power.
Really easy, but take it slow and DON'T skip ahead and miss a step or you will end up with it either not working OR a brick.
Cheers...
10X for your help
i tried to do what you said
1. download hardspl v7 from the first post
2. extract ruu_signed.nbh and rename it to HERMIMG.nbh
3. copy it to a microsd card, make sure the card is formatted as fat32
4. download sspl-herm from here
5. extract SSPL-HERM.exe and copy it to your phone.
6. insert sd card and run sspl-herm.exe on the phone.
7. you should see the tri-color screen and then it should change to this
8. press power button to start flashing
9. reset when you get the msg that its done.
I didnt undrestand part 3 how can i know if the micro SD on my phone is formatted as fat32?and how to format it?
I copied the file HERMIMG.nbh to my micro SD and run the sspl.herm.exe
and i got the rri-color screen but it stuck on it and do nothing.
l1234 said:
10X for your help
i tried to do what you said
1. download hardspl v7 from the first post
2. extract ruu_signed.nbh and rename it to HERMIMG.nbh
3. copy it to a microsd card, make sure the card is formatted as fat32
4. download sspl-herm from here
5. extract SSPL-HERM.exe and copy it to your phone.
6. insert sd card and run sspl-herm.exe on the phone.
7. you should see the tri-color screen and then it should change to this
8. press power button to start flashing
9. reset when you get the msg that its done.
I didnt undrestand part 3 how can i know if the micro SD on my phone is formatted as fat32?and how to format it?
I copied the file HERMIMG.nbh to my micro SD and run the sspl.herm.exe
and i got the rri-color screen but it stuck on it and do nothing.
Click to expand...
Click to collapse
you dont know how to format a card? its just like formating a hard drive.
put the microsd in your card reader
right click on the icon in "my computer" that is your sd card ***MAKE SURE ITS THE SD CARD AND NOT A HARD DRIVE******
select format
in the file system drop down select fat32
click start and wait for a finished message
copy over the rom image and sspl.herm.exe
place the card back in your phone
run sspl.herm.exe from your phone
then a white screen should show shortly after the tri-colour screen, press the power button to flash (as it says on the screen).
do not place anything else on the sd card also backup the card if you have anything on it.
skeeve666 said:
you dont know how to format a card? its just like formating a hard drive.
put the microsd in your card reader
right click on the icon in "my computer" that is your sd card ***MAKE SURE ITS THE SD CARD AND NOT A HARD DRIVE******
select format
in the file system drop down select fat32
click start and wait for a finished message
copy over the rom image and sspl.herm.exe
place the card back in your phone
run sspl.herm.exe from your phone
then a white screen should show shortly after the tri-colour screen, press the power button to flash (as it says on the screen).
do not place anything else on the sd card also backup the card if you have anything on it.
Click to expand...
Click to collapse
ok great i did it
i try to update the rom HTC_HERMES_S64_WM_6[1].1_TouchFlo2D_UC_V3_WWE_02.10.2008
maybe there is more updating one?
now after i open the file RUUWrapper.exe
it choose for me
spl-2.02/2.10/2.30 new bootloader
and checked the is it hard spl
so when i start to upgrade on my phone there is a screen
Herming.nbh-
IPL-
bootloader
then i press the power button
and all above is OK
and get the
Update complete
update success
but on my pc i get an error
what is wrong again?
TyTn II Rom Upgrade issue
Hope someone can offer some advice...
I have a TyTn II phone I am trying to upgrade the ROM image to 6.1 Pro. Here are the details:
HTC TyTn II
IMEA: 35575701121357201
SN: HT739GB14803
Current ROM Image: 1.56.405.5
Date: 8/28/07
Radio: 1.27.12.11
Protocol 22.45.88.07W
P/N: 99HCY146-00
I downloaded what I thought was the right ROM image from the HTC website but:
The error I get is:
ERROR [294] : INVALID VENDER ID
This phone was purchased in Dubai so I downloaded the RUU file from the Middle East download site. The file I have is:
HTC TyTN II_RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe
Any thoughts to help me find the right file and procedure for upgrading the ROM
RonEB, Wrog forum dude, you want the Kaiser forum. Thatswhat your phone is and you'll get more help there.
l1234, instead of using the pc, you can now use the sd method to flash your OS. I find it HEAPS easier and a hell of a lot safer too...
1. Copy the .nbh file of the os onto the sd card. (Didn't say format fat32 as you did already), rename to Hermimg.nbh.
2. Put sd card back into phone and reset to bootloader.
3. Follow the prompts.
This should work with no problems... I personally HATE using the pc as there are tons of things that can and do go wrong. Just make sure you have good battery charge left (minimum 50%.
Cheers...
ultramag69 said:
RonEB, Wrog forum dude, you want the Kaiser forum. Thatswhat your phone is and you'll get more help there.
l1234, instead of using the pc, you can now use the sd method to flash your OS. I find it HEAPS easier and a hell of a lot safer too...
1. Copy the .nbh file of the os onto the sd card. (Didn't say format fat32 as you did already), rename to Hermimg.nbh.
2. Put sd card back into phone and reset to bootloader.
3. Follow the prompts.
This should work with no problems... I personally HATE using the pc as there are tons of things that can and do go wrong. Just make sure you have good battery charge left (minimum 50%.
Cheers...
Click to expand...
Click to collapse
thanx but what did u mean by reset to bootloader is to click on SSPL-HERM.exe in my phone? and what is "3. Follow the prompts."
all of that i did:
1. Copy the .nbh file of the os onto the sd card. (Didn't say format fat32 as you did already), rename to Hermimg.nbh.
2. Put sd card back into phone
press and hold the "okay" button on the left side of the phone then press and hold the power button then press the rest button on the botttom of the phone to enter boot loader mode.
the phone will pickup the rom on the sd card ad u just follow what it says on screen.
skeeve666 said:
press and hold the "okay" button on the left side of the phone then press and hold the power button then press the rest button on the botttom of the phone to enter boot loader mode.
the phone will pickup the rom on the sd card ad u just follow what it says on screen.
Click to expand...
Click to collapse
i did it but i dont see any changes
in the settings>about
it still
windows mobile 6
ce os 5.1.195
You press and hold the ok button, power button and reset with stylus until you see the tri-colour screen (bootloader) flash up. It will then recognise the flash file. I believe you just reset the phone which will do nothing.
You DON'T need to use the SSPL.exe file now as you have Hard SPL. Its safer to use than SSPL.
If it works properly it should say "hit power button to start update". Hit power button. At the end it should say "update complete, reset phone", use stylus to soft reset phone. IE... 3. Follow the prompts...
Cheers...
ultramag69 said:
You press and hold the ok button, power button and reset with stylus until you see the tri-colour screen (bootloader) flash up. It will then recognise the flash file. I believe you just reset the phone which will do nothing.
You DON'T need to use the SSPL.exe file now as you have Hard SPL. Its safer to use than SSPL.
If it works properly it should say "hit power button to start update". Hit power button. At the end it should say "update complete, reset phone", use stylus to soft reset phone. IE... 3. Follow the prompts...
Cheers...
Click to expand...
Click to collapse
i did what u wrote "press and hold the ok button, power button and reset with stylus until you see the tri-colour screen (bootloader) flash up. It will then recognise the flash file."
then it was
HERMING.nbh-
IPL-
BOOTLOADER-
press power button
to start update image
i pressed
than it was
HERMING.nbh-ok
IPL-ok
BOOTLOADER-ok
update complete
update success
===========
it didnt said
"update complete, reset phone"
but i did a soft reset with stylus
and it seems nothing changed
Either flash a different rom on then check again or check the list of apps against what you have on your Hermes now. It could be you already have updated the rom. Try PDACorner V18? (could be 25). On my Hermes it reads, in Settings>System>Device Information -
Rom Version: PC_Pro.V18
ROM Date: 07/30/08
Radio Version: 1.54.30.10
Protocal Version: 32.87.7020.20H
The important thing is it will change your ROM version so you can see if it has been changed.
Cheers...
ultramag69 said:
Either flash a different rom on then check again or check the list of apps against what you have on your Hermes now. It could be you already have updated the rom. Try PDACorner V18? (could be 25). On my Hermes it reads, in Settings>System>Device Information -
Rom Version: PC_Pro.V18
ROM Date: 07/30/08
Radio Version: 1.54.30.10
Protocal Version: 32.87.7020.20H
The important thing is it will change your ROM version so you can see if it has been changed.
Cheers...
Click to expand...
Click to collapse
what is the PDACorner V18?
i look for the Device Info and it is:
Rom Ver. 3.22.110.1
Rom date 01/04/07
Radio Ver 1.16.00.00
protocol Ver 32.53.7018.01w
so it seems that it isnt update
The rom I use is PDACorner v18(?) or 25, can't remember which one.
If you change the rom to one of these you will see the difference straight away.
Cheers...
ultramag69 said:
The rom I use is PDACorner v18(?) or 25, can't remember which one.
If you change the rom to one of these you will see the difference straight away.
Cheers...
Click to expand...
Click to collapse
i tried to upgrade with HTC_HERMES_S64_WM_6[1].1_TouchFlo2D_UC_V3_WWE_02.10.2008
the rom that you use is more good than that?
Personal choice, as all roms are.
If you did succeed with flashing SB64's rom then reflashing won't change anything. Using a different rom will. The ones I suggested will DEFINATELY change the rom name.
To find a rom you like, you will 1st have to decide what you want included. I can tell you what I use BUT it may not be what you require. There are NO wrong ROMs, just personal choices. Look in the WM06 section of te forum, there are always a heap of cooked roms there.
Do some reading, they are always described pretty well by the chefs as to what they include. I like SB64's roms but find that, because I have 3rd party apps I like, they are a little "stuffed" with apps I don't use or like , leaving no room for the stuff I want.
Cheers...
ultramag69 said:
Personal choice, as all roms are.
If you did succeed with flashing SB64's rom then reflashing won't change anything. Using a different rom will. The ones I suggested will DEFINATELY change the rom name.
To find a rom you like, you will 1st have to decide what you want included. I can tell you what I use BUT it may not be what you require. There are NO wrong ROMs, just personal choices. Look in the WM06 section of te forum, there are always a heap of cooked roms there.
Do some reading, they are always described pretty well by the chefs as to what they include. I like SB64's roms but find that, because I have 3rd party apps I like, they are a little "stuffed" with apps I don't use or like , leaving no room for the stuff I want.
Cheers...
Click to expand...
Click to collapse
GOOOD IT WORKSSSS THANK U ALL i upgrade to PDACorner v 25
i will try to upgrade to SB64
Okay, I was able to install the HSPL to 2.08. By the way I was on T-mobile stock Win 6.5. I installed MAGLDR 1.13 and I verified bothh are installed. When I tried to load NAND Android, could not find the loader.exe or daf.exe to install. I have a phone right now in the bootloader menu. I just want to go back to Win Mo 6.5, I downloaded stock from T-mobile website, but the PC does not recognize the device (has it as MAGLDR device). I would really appreciate any help that you could give. I have searched the forums for this topic, can't seem to find a solution that works. When I tried to install WinMo 6.5 it says it could not communicate with my device (only way I can even see it is to select USB mass storage in bootloader menu). USB flash says USB, but nothing happens. Windows device manager doesn't recogniz device either.
I will never attempt this again, and thanks again for any help you can give.
okay, things should turn out okay.
if you want to proceed with nand:
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND
Click to expand...
Click to collapse
for an example of a daf rom use: http://forum.xda-developers.com/showthread.php?t=917590
from: http://forum.xda-developers.com/showthread.php?t=893948
to return to wm:
flash rom from sd card:
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
from: http://forum.xda-developers.com/showthread.php?t=653614
Tina Raymond said:
Okay, I was able to install the HSPL to 2.08. By the way I was on T-mobile stock Win 6.5. I installed MAGLDR 1.13 and I verified bothh are installed. When I tried to load NAND Android, could not find the loader.exe or daf.exe to install. I have a phone right now in the bootloader menu. I just want to go back to Win Mo 6.5, I downloaded stock from T-mobile website, but the PC does not recognize the device (has it as MAGLDR device). I would really appreciate any help that you could give. I have searched the forums for this topic, can't seem to find a solution that works. When I tried to install WinMo 6.5 it says it could not communicate with my device (only way I can even see it is to select USB mass storage in bootloader menu). USB flash says USB, but nothing happens. Windows device manager doesn't recogniz device either.
I will never attempt this again, and thanks again for any help you can give.
Click to expand...
Click to collapse
Do this cut your phone off then cut it back on by holding the volume down button and momentaraly holdind thd power(end) button. When the tri color bootloader comes up plug your phone into the USB cable and wait for the white bar at the bottom of the phone screen to say USB ans then run the update utility for the T-Mobile ROM.
Thanks for the prompt reply. I think I am going to go back to 6.5. When I went to the folder I xtracted for android, I could not find a run.exe or install/ It loaded three files, boot, system, and some other file. None of them had those listed in the files. Like I said, I shouldn't have even attempted it.
Now, when I flas back to WinMo, will it only be on the SD card?
were those three wrapped in a .zip when you downloaded them? sounds like you may have a zip nand rom, but are following daf nand instructions.
got a rom filename for us?
Thanks for the prompt reply. I think I am going to go back to 6.5. When I went to the folder I xtracted for android, I could not find a run.exe or install/ It loaded three files, boot, system, and some other file. None of them had those listed in the files. Like I said, I shouldn't have even attempted it.
Now, when I flas back to WinMo, will it only be on the SD card?
three folders, not files, system, boot and meta-inf.
You unzipped a zip nand rom, then followed daf nand rom instructions.
Tina Raymond said:
Thanks for the prompt reply. I think I am going to go back to 6.5. When I went to the folder I xtracted for android, I could not find a run.exe or install/ It loaded three files, boot, system, and some other file. None of them had those listed in the files. Like I said, I shouldn't have even attempted it.
Now, when I flas back to WinMo, will it only be on the SD card?
Click to expand...
Click to collapse
No you will just be using the Sd card to flash the ROM if you go the SD card rout, and by the way when you are done flashing your phone you can remove that file from your SD. Flashing with the SD card is just a easier and safer way of flashing seing as the only thing that could go drastically wrong is the battery die or you remove the SD card while the flash is in progress. Also flashing from SD takes a littke longer too.
Edit: You well lose HSPL and MAGLD by using the SD card method.
You are right! Unfortunately I got frustated with it and I deleted the files. Here ia the one I tried [23.FEB.11][ZIP][LEO512][LEO1024]CMYLXGOs Stock Desire HD(2)[RUU1.84][RAFPIGNA 1.7OC]
--------------------------------------------------------------------------------
Looks like ALL IS well when download the stock. Thaks T-macgnolia! Actually thanks everyone! My husband thanks you as I didn't destroy his phone.
Okay, last thing I hope. I was able to get 6.5 up and running. Everything works except the battey will not charge. (the little charging icon does not show up in the status bar on top) The battery ia down to 2 percent, when I plug it in the battery goes to full and the led light blinks red, then green all the time. I pulled the battery to reset, doesn't help. What did I do?
Oops, flashing light indicates faulty battery or battery charging circuits. Check battery pins aren't a little bent, perhaps borrow a battery from friend / shop and see if it still happens.
ONLY FOR NEON USERS
Hi everybody this is my first thread not because I'm lazy (that's also true but is a long story ). I managed to run android froyo on a htc touch dual neon 200 and now I'll show you how.
[SIZE="5"[COLOR="Red"]]THIS TUTORIAL IS USING FILES AND SOM COPIED PARTS FROM http://forum.xda-developers.com/showthread.php?t=1002683 IF THAT'S AGAINST THE RULE I HOPE THAT VSAVICHEV WILL COMPLETE HIS TUTORIAL WITH MINE[/COLOR][/SIZE]
-YOU NEED A 2G AT LEAST MICRO SD (SDHC NOT TESTED)
-First of all update your radio with the last one and do the Hardspl, you can find lots of tutorials on this forum so I'll just skip over that.
-Download the NEON.zip file at the end of this tutorial.
-Download the android version from here http://sourceforge.net/projects/androidhtc/files/2011-08-29-froyo/ , I used the system-froyo-eu-odex-29-08-11_19-patched.tgz version but if you find a newest one you probably can use that one without issues.
-Connect your htc neon to computer and go to the micro sd dir
-Now open NEON.zip and choice the .NBH file according to your phone version, then put it in the root of the micro sd.
-Rename the .NBH file you just moved as NEONIMAGE.NBH
-Create a new folder called andboot
-Rename the android os you downloaded as androidinstall.(the extention it already has, commonly is .tgz)
-Place the androidinstall.tgz file in the andboot dir
-Shut down the phone
-Hold camera button and press power button until it turns on
-Then phone will detect itself that there is a firmware is on your SD card and will ask your to press POWER button, so press it. Flashing takes about 20 seconds, after it's over pull the battery or press reset.
-Turn device on and wait until i says "Hold down Volume Up or DPad Center to launch installer" press and hold central button, you'll see installer menu. If you missed yo press button- reset and press it directly after seeing some output on the screen.
Choose Data & Sys on "(*) NAND" and press Install android, then answer yes twice. Now installation process is started, wait for a minute or so.
-And at last after installation is over press Quit, first boot takes some time so be patient. Then enjoy your Android.
IMPORTANT
You will not have a menu key whith this O.S. so download Buttonr Remapper for android, install it and define a button from the keypad as menu button. (ex. I used the enter button because is almost useless but you cand define any other button this way)
ENJOY
EDIT:
instead of installing the os on internal memory you must choice the sd card because neon 200 has 256 mb of internal memory, that means you have about 15 or 20 mb of free space after installing.
EDIT 2:
the install has to be made on the img files.. still some apps don't want to insall.
Well, i'm not angry, actually i'm happy, that someone used my work. What is interesting for me, is how did you use my files for neon, i thought there is different hardware. Was i wrong?
Nice to see you here (-:
Is there an updated version of your android ROM?
P.S.
The link in post is not valid
Well, my Nike is dead, so there is no chance that i continue work on the kernel, now i am really happy with HD2. So on the Nikes thread i just looking sometimes, if someone continues my work to help him if needed.
Tryin' out gingerbread version, cross you fingers for me
Hello my name is Robin,
Yesterday I tried to install Chainfire 3D but with no luck, I saw after that time it was not made so for Jellybean. very stupid of me now, so do not start my phone when I put it in force update I get a pink screen I can still come from my phone in the normal recovery, but that's the only thing I can. tried wipe cache and reset without result. Can you help me because I already busy two days and it still can not.
Sorry for my bad english I'm dutch.
Greetings Robin
Van anybody help me
please can enyaone give a answer fast? I wan't to give this phone as a christmas present to my cousin
Hope somebody will help me
Robje007 you only get the pink screen if their is no update found below is how to use force update
Upgrade instructions
1. Unzip the downloaded file
2. Place the Update.app inside a folder named "dload" on your SD card root directory
3. Power off and turn on your Ascend Y300 holding volume down + volume up + power button
This was taken from Huawei upgrade guide
Force upgrade
Step 1. A MICRO SD card of 2G or more should be available. The MICRO SD card
made by Sandisk, Kingstone, or Kingmax is recommended.
Step 2. Format the MICRO SD card (This operation is optional).
Step 3. Copy the Software: main package to a directory named dload.
Step 4. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of
the MICRO SD card.
Step 5. Make sure your handset is power off. Insert the MICRO SD card into the
handset. Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode.
Step 6. When the progress bar stop, the phone will restart, if not , you need to
remove the battery manually.
Step 7. Copy the Software:vendor package to a directory named dload. Then
Execute Step 4 – Step6 repeatedly.
If want to install a custom or repack Rom for the phone Then
Press vol up + power to boot into recovery and install the Rom from their. (Keep pressing the buttons until the phone boots into recovery)
If you want to boot into sideloader and use adb to push a Rom then
Press vol down + power if the Hauwei logo stays on the screen then you are in sideloader mode keep pressing the keys for at least 10 to 15 seconds.
Hope this is of help to you
i want to know what alternative volume button flex strips can i use for my huawei y300-0100 as mines damage and its not available in my country