[Q] Huawei Ascend Y300 Bricked - Android Q&A, Help & Troubleshooting

Hello my name is Robin,
Yesterday I tried to install Chainfire 3D but with no luck, I saw after that time it was not made so for Jellybean. very stupid of me now, so do not start my phone when I put it in force update I get a pink screen I can still come from my phone in the normal recovery, but that's the only thing I can. tried wipe cache and reset without result. Can you help me because I already busy two days and it still can not.
Sorry for my bad english I'm dutch.
Greetings Robin

Van anybody help me
please can enyaone give a answer fast? I wan't to give this phone as a christmas present to my cousin
Hope somebody will help me

Robje007 you only get the pink screen if their is no update found below is how to use force update
Upgrade instructions
1. Unzip the downloaded file
2. Place the Update.app inside a folder named "dload" on your SD card root directory
3. Power off and turn on your Ascend Y300 holding volume down + volume up + power button
This was taken from Huawei upgrade guide
Force upgrade
Step 1. A MICRO SD card of 2G or more should be available. The MICRO SD card
made by Sandisk, Kingstone, or Kingmax is recommended.
Step 2. Format the MICRO SD card (This operation is optional).
Step 3. Copy the Software: main package to a directory named dload.
Step 4. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of
the MICRO SD card.
Step 5. Make sure your handset is power off. Insert the MICRO SD card into the
handset. Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode.
Step 6. When the progress bar stop, the phone will restart, if not , you need to
remove the battery manually.
Step 7. Copy the Software:vendor package to a directory named dload. Then
Execute Step 4 – Step6 repeatedly.
If want to install a custom or repack Rom for the phone Then
Press vol up + power to boot into recovery and install the Rom from their. (Keep pressing the buttons until the phone boots into recovery)
If you want to boot into sideloader and use adb to push a Rom then
Press vol down + power if the Hauwei logo stays on the screen then you are in sideloader mode keep pressing the keys for at least 10 to 15 seconds.
Hope this is of help to you

i want to know what alternative volume button flex strips can i use for my huawei y300-0100 as mines damage and its not available in my country

Related

Flashed Rom with Expired Windows Beta..

I was trying to flash the RRE_Fuze_Rom_v40_Hybrid rom - only to find out after booting that it contained Windows Mobile Beta - and had expired.. the screen seems to be locked and I cant establish an Active Sync connection to reflash.
I think I saw something before to the degree of putting an image onto an sd card and booting with that in..
Can someone give me some advice on how to re-flash so that I can use my phone.. A link with instructions would be sufficient.
Anyway work arounds are welcome - I don't think I have a mini-sd card reader with me at my office so.. i'm open to "creativity".
P.S. - sorry if this is in the wrong place.
As it says here: http://forum.xda-developers.com/showthread.php?t=448008
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Click to expand...
Click to collapse
Hope that helps ^^
Thank you so much.. I think i'm back in action now!
Zeraven said:
As it says here: http://forum.xda-developers.com/showthread.php?t=448008
Hope that helps ^^
Click to expand...
Click to collapse

[Q]

My Huawei Ideos u8150 is stuck on the logo. its six month old and not under warranty seal... I don't know what I've done...
now when I was surfing the internet (Obviously with another phone) I got an info says that I can format the SD card and create a new folder named "dloder" then put some files on it. then when I restart the phone pressing the volume down, red button and power button, the phone will update itself and it'll be ok again. now my Qs are:-
1 - does such method work?
2 - if it works then what are the files I should put on the "dloder" folder and where do I get those files?
Thanks in advance...
jhonet said:
My Huawei Ideos u8150 is stuck on the logo. its six month old and not under warranty seal... I don't know what I've done...
now when I was surfing the internet (Obviously with another phone) I got an info says that I can format the SD card and create a new folder named "dloder" then put some files on it. then when I restart the phone pressing the volume down, red button and power button, the phone will update itself and it'll be ok again. now my Qs are:-
1 - does such method work?
2 - if it works then what are the files I should put on the "dloder" folder and where do I get those files?
Thanks in advance...
Click to expand...
Click to collapse
Yes, such a method may work. See here: http://www.mygsmforum.com/f15/huawei-ideos-u8150-updates-procedures-7317/ (You need to register get the files though).

NEW!! TUTORIAL touch dual neon 200 android froyo full running NEW!!

ONLY FOR NEON USERS
Hi everybody this is my first thread not because I'm lazy (that's also true but is a long story ). I managed to run android froyo on a htc touch dual neon 200 and now I'll show you how.
[SIZE="5"[COLOR="Red"]]THIS TUTORIAL IS USING FILES AND SOM COPIED PARTS FROM http://forum.xda-developers.com/showthread.php?t=1002683 IF THAT'S AGAINST THE RULE I HOPE THAT VSAVICHEV WILL COMPLETE HIS TUTORIAL WITH MINE[/COLOR][/SIZE]
-YOU NEED A 2G AT LEAST MICRO SD (SDHC NOT TESTED)
-First of all update your radio with the last one and do the Hardspl, you can find lots of tutorials on this forum so I'll just skip over that.
-Download the NEON.zip file at the end of this tutorial.
-Download the android version from here http://sourceforge.net/projects/androidhtc/files/2011-08-29-froyo/ , I used the system-froyo-eu-odex-29-08-11_19-patched.tgz version but if you find a newest one you probably can use that one without issues.
-Connect your htc neon to computer and go to the micro sd dir
-Now open NEON.zip and choice the .NBH file according to your phone version, then put it in the root of the micro sd.
-Rename the .NBH file you just moved as NEONIMAGE.NBH
-Create a new folder called andboot
-Rename the android os you downloaded as androidinstall.(the extention it already has, commonly is .tgz)
-Place the androidinstall.tgz file in the andboot dir
-Shut down the phone
-Hold camera button and press power button until it turns on
-Then phone will detect itself that there is a firmware is on your SD card and will ask your to press POWER button, so press it. Flashing takes about 20 seconds, after it's over pull the battery or press reset.
-Turn device on and wait until i says "Hold down Volume Up or DPad Center to launch installer" press and hold central button, you'll see installer menu. If you missed yo press button- reset and press it directly after seeing some output on the screen.
Choose Data & Sys on "(*) NAND" and press Install android, then answer yes twice. Now installation process is started, wait for a minute or so.
-And at last after installation is over press Quit, first boot takes some time so be patient. Then enjoy your Android.
IMPORTANT
You will not have a menu key whith this O.S. so download Buttonr Remapper for android, install it and define a button from the keypad as menu button. (ex. I used the enter button because is almost useless but you cand define any other button this way)
ENJOY
EDIT:
instead of installing the os on internal memory you must choice the sd card because neon 200 has 256 mb of internal memory, that means you have about 15 or 20 mb of free space after installing.
EDIT 2:
the install has to be made on the img files.. still some apps don't want to insall.
Well, i'm not angry, actually i'm happy, that someone used my work. What is interesting for me, is how did you use my files for neon, i thought there is different hardware. Was i wrong?
Nice to see you here (-:
Is there an updated version of your android ROM?
P.S.
The link in post is not valid
Well, my Nike is dead, so there is no chance that i continue work on the kernel, now i am really happy with HD2. So on the Nikes thread i just looking sometimes, if someone continues my work to help him if needed.
Tryin' out gingerbread version, cross you fingers for me

Huawei Mediapad ICS update

Hi,
Has anyone managed to download the firmware update from Huawei's website here? I've been unable to download it for weeks now. The link seems to be down. Any mirrors?
Are you serious?
Try the search feature?
I managed to download it after trying several times. However, I keep getting a FAIL when I follow the instructions, i.e. copy the dload directory to the root of my sdcard, insert it, press and hold volume down + power button.
And from the FAIL screen, I can only reboot back into the update screen, which fails again.
1. What have I done wrong?
2. Since the battery is fixed, how can I force shutdown?
Usually that happens if the download is corrupted. Try to redownload the fw again. Btw, have you tried to remove the SD card? If the SD card with dload folder (with relevant files inside) is inserted then it would always go to the update screen.
to force shutdown hold power button for 10 seconds
Thanks. Turns out there's something wrong with my sdcard. I don't know why - they're working perfectly fine in Windows or in other phones. Anyway, I tried a 3rd card and it worked.
make sure that your card is formatted to FAT32

[Q] Huawei G610-U20 Firmware

I am looking for a firmware for my Huawei G-610 (V100R001C00B115). I couldn't find it free of cost over the internet, can anyone help me finding it?
HamzaLV said:
I am looking for a firmware for my Huawei G-610 (V100R001C00B115). I couldn't find it free of cost over the internet, can anyone help me finding it?
Click to expand...
Click to collapse
check it here bro http://consumer.huawei.com/np/support/downloads/index.htm
STEPS FOR INSTALLATION
step One: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step Two: Check the root directory of the SD card you dload UPDATA.APP.
Step Three: phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure
Step Four: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.
sorry for late reply btw good luck!!!

Categories

Resources