I am looking for a firmware for my Huawei G-610 (V100R001C00B115). I couldn't find it free of cost over the internet, can anyone help me finding it?
HamzaLV said:
I am looking for a firmware for my Huawei G-610 (V100R001C00B115). I couldn't find it free of cost over the internet, can anyone help me finding it?
Click to expand...
Click to collapse
check it here bro http://consumer.huawei.com/np/support/downloads/index.htm
STEPS FOR INSTALLATION
step One: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step Two: Check the root directory of the SD card you dload UPDATA.APP.
Step Three: phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure
Step Four: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.
sorry for late reply btw good luck!!!
Related
My Huawei Ideos u8150 is stuck on the logo. its six month old and not under warranty seal... I don't know what I've done...
now when I was surfing the internet (Obviously with another phone) I got an info says that I can format the SD card and create a new folder named "dloder" then put some files on it. then when I restart the phone pressing the volume down, red button and power button, the phone will update itself and it'll be ok again. now my Qs are:-
1 - does such method work?
2 - if it works then what are the files I should put on the "dloder" folder and where do I get those files?
Thanks in advance...
jhonet said:
My Huawei Ideos u8150 is stuck on the logo. its six month old and not under warranty seal... I don't know what I've done...
now when I was surfing the internet (Obviously with another phone) I got an info says that I can format the SD card and create a new folder named "dloder" then put some files on it. then when I restart the phone pressing the volume down, red button and power button, the phone will update itself and it'll be ok again. now my Qs are:-
1 - does such method work?
2 - if it works then what are the files I should put on the "dloder" folder and where do I get those files?
Thanks in advance...
Click to expand...
Click to collapse
Yes, such a method may work. See here: http://www.mygsmforum.com/f15/huawei-ideos-u8150-updates-procedures-7317/ (You need to register get the files though).
Hi,
Has anyone managed to download the firmware update from Huawei's website here? I've been unable to download it for weeks now. The link seems to be down. Any mirrors?
Are you serious?
Try the search feature?
I managed to download it after trying several times. However, I keep getting a FAIL when I follow the instructions, i.e. copy the dload directory to the root of my sdcard, insert it, press and hold volume down + power button.
And from the FAIL screen, I can only reboot back into the update screen, which fails again.
1. What have I done wrong?
2. Since the battery is fixed, how can I force shutdown?
Usually that happens if the download is corrupted. Try to redownload the fw again. Btw, have you tried to remove the SD card? If the SD card with dload folder (with relevant files inside) is inserted then it would always go to the update screen.
to force shutdown hold power button for 10 seconds
Thanks. Turns out there's something wrong with my sdcard. I don't know why - they're working perfectly fine in Windows or in other phones. Anyway, I tried a 3rd card and it worked.
make sure that your card is formatted to FAT32
Hello my name is Robin,
Yesterday I tried to install Chainfire 3D but with no luck, I saw after that time it was not made so for Jellybean. very stupid of me now, so do not start my phone when I put it in force update I get a pink screen I can still come from my phone in the normal recovery, but that's the only thing I can. tried wipe cache and reset without result. Can you help me because I already busy two days and it still can not.
Sorry for my bad english I'm dutch.
Greetings Robin
Van anybody help me
please can enyaone give a answer fast? I wan't to give this phone as a christmas present to my cousin
Hope somebody will help me
Robje007 you only get the pink screen if their is no update found below is how to use force update
Upgrade instructions
1. Unzip the downloaded file
2. Place the Update.app inside a folder named "dload" on your SD card root directory
3. Power off and turn on your Ascend Y300 holding volume down + volume up + power button
This was taken from Huawei upgrade guide
Force upgrade
Step 1. A MICRO SD card of 2G or more should be available. The MICRO SD card
made by Sandisk, Kingstone, or Kingmax is recommended.
Step 2. Format the MICRO SD card (This operation is optional).
Step 3. Copy the Software: main package to a directory named dload.
Step 4. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of
the MICRO SD card.
Step 5. Make sure your handset is power off. Insert the MICRO SD card into the
handset. Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode.
Step 6. When the progress bar stop, the phone will restart, if not , you need to
remove the battery manually.
Step 7. Copy the Software:vendor package to a directory named dload. Then
Execute Step 4 – Step6 repeatedly.
If want to install a custom or repack Rom for the phone Then
Press vol up + power to boot into recovery and install the Rom from their. (Keep pressing the buttons until the phone boots into recovery)
If you want to boot into sideloader and use adb to push a Rom then
Press vol down + power if the Hauwei logo stays on the screen then you are in sideloader mode keep pressing the keys for at least 10 to 15 seconds.
Hope this is of help to you
i want to know what alternative volume button flex strips can i use for my huawei y300-0100 as mines damage and its not available in my country
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
What is new version C232B008 or C264B001? My tablet is on C264B001.
mugy said:
What is new version C232B008 or C264B001? My tablet is on C264B001.
Click to expand...
Click to collapse
No idea. Sorry.
Deleting the au_temp.cfg.
sunnysardine said:
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
Click to expand...
Click to collapse
How important is it to delete that file. Is that the reason why when i install the update it says "update.app is a invalid package"? Thanks mate.
Hi. I just reinstall the software, but how do I get back my e papers subscriptions?
Is there any costum rom, and i have this tablet locked on one network ,is there a solution to run other network.thanks in advance.
I did all as you said, but now my tablet is completely dead.
Thanks it worked.
Provide the download link for the firmware please?
Thx Sunnysardine, it works for me.
Just to add a bit for my experience.
The process 1 - 8 MUST be followed exactly. I tried putting the update.app w/o the load folder, it did not work
For process 10, it takes a bit of time. the Huawei logo showed up for quite long before it power up to 1st screen. after that, all well. So got to be patient a little bit
Thanks man
I followed ur instructions exactly and it works, nice
If not for this, I would have thrown away my mediapad, it totally not login-able/ unusable without Gr8 code
Thanks again!
it is work for me.. thanks for sharing
Hi there, I found a way to remove GR8 app without installing the update. I found out that due to the device cannot detect the update in my sd card.
1) turn on the Huawei media pad s7-721u, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
This is where you can download the firmware
[email protected]@/download/downloadCenter?downloadId=27805&version=51115&siteCode=pk
Wrong Firmware
sunnysardine said:
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
Click to expand...
Click to collapse
How can I fix the tablet after being flashed with wrong firmware?
It doesn't turn on and in QPST or QFIL it was in download mode.
I have correct firmware and its dump.
Hello XDA members.
This is my first post so any advice about posting is very welcomed. And now the problem.
I have a Huawei S8-701U tablet that is stuck at “Recovery image verify failed” error. The major problem I have is that it cannot be recognized by my windows 7 based computer in order to try all the helpful advice I found inside XDA forum. So I would be grateful if you could help me connect the tablet with pc and try your advice to resolve mu issue.
[email protected] said:
Hello XDA members.
This is my first post so any advice about posting is very welcomed. And now the problem.
I have a Huawei S8-701U tablet that is stuck at “Recovery image verify failed” error. The major problem I have is that it cannot be recognized by my windows 7 based computer in order to try all the helpful advice I found inside XDA forum. So I would be grateful if you could help me connect the tablet with pc and try your advice to resolve mu issue.
Click to expand...
Click to collapse
Hi if your device model is t1 8.0 (S8701u)download this firmware:
Huawei MediaPad T1 8.0 (S8701u)
http://download-c1.huawei.com/download/downloadCenter?downloadId=73603&version=270428&siteCode=gh
If your device model is M1 8.0 (S8701u) download this one
Huawei MediaPad M1 8.0 (S8701u)
http://huawei-firmware.com/rom/huawei-mediapad-m1-80/s8701u/1551
Follow instruction good luck
Hello again.
I copied the dloader folder as instruction sais at SD card but i cannot go into update mode with the instructions provided. I followed the" 1.2.2 SD card manually upgrade"
1.2.2 SD card manually upgrade
1) dload folder will be copied to the SD card root directory.
2) Make sure the board is turned off, insert the SD card into the card.
3) Press the volume keys cut (away from the power button key) and hold, then press the power button board to boot.
4) Continue to press and hold the volume down until the machine into the SD card upgrade interface.
5) normal upgrade, the upgrade is successful, the upgrade fails phenomenon and the same SD card automatically upgraded.
Any other sugestion please?
[email protected] said:
Hello again.
I copied the dloader folder as instruction sais at SD card but i cannot go into update mode with the instructions provided. I followed the" 1.2.2 SD card manually upgrade"
Any other sugestion please?
Click to expand...
Click to collapse
Try this , Hold just vol down and plug USB cable : ). This is for fastboot mode , so if you are able to get your device recognised extract update.app with huawei extractor tool .
Example:
https://www.youtube.com/watch?v=OKRTbv-6Kzc
Today when I saw at XDA app that I have a replay I said “ Thank God my problem is over” but nop!! A new problem appeared. I download the extractor tool but when I open the update.app file I saw that there where not all the files needed as I saw at the video example. So two possibilities exist. Neither the files are not indeed inside the .app file or my myopia has gone up and I can’t see.
Any help please??
P.S I tried to upload a screenshot from extraction tool but with now luck.
[email protected] said:
Today when I saw at XDA app that I have a replay I said “ Thank God my problem is over” but nop!! A new problem appeared. I download the extractor tool but when I open the update.app file I saw that there where not all the files needed as I saw at the video example. So two possibilities exist. Neither the files are not indeed inside the .app file or my myopia has gone up and I can’t see.
Any help please??
P.S I tried to upload a screenshot from extraction tool but with now luck.
Click to expand...
Click to collapse
Can you post on the internet like on the https://imgur.com/upload and send me link to private message .
Hello!
I tried with the files you suggested but I can not go into fast boot mode or any mode so I’m starting to believe that there is no way fix it. The only think it does when I try all button combinations is to restart nothing more. I appreciate all the help but maybe there is no way to get into it.
Great news!!!
I finally managed to install the new firmware. :laugh: After doing again and again what I've been advised
All i did was to press Vol+ and Vol - while pressing power button and voila! ! The little green robot appeared and start to install the programme. I forgot to say that i put the 'dload' folder into SD card.
Thanks for all the help!!:good::good: