Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
USB Stupidity
Hi,
Affraid i didn't find anything either, and wanted to do the same thing.
I resorted to buying the cable from expansis and "Adapting it my self"
The project was fairly simple, and if your happy with a soldering iron and a multimeter you should be fine.
I now have a small connector on my dash that will disapears under the dashboard to a breakout box. All i basicly did was chop off the box that has the two female connectors in it, extend the wire with an old cut up parralel printer cable (multicore and was lying arround) and then terminated in a project box from maplins.
This has two headphone sockets, (audio out stero, and mic in) as well as a USB socket to charge the phone. (the plan was to have the USB socket be usable for data... but that bit went a bit wrong...
Still from the testing i have done, i now have tomtom and WindowsMedia mp3 play back comming through my car stero, and my VarioII reports to be charging. Havn't had a chance to test it on a long drive yet, i think i might still need a beefier 12Volt to USB adapter.
If anyone want more info on what i did, i'd be glad to help.
here are some pics, sorry v bad Q....
I don't seem to see any pics?...
Ooops...
here you go
Seems good to me- as long as it all works ok then its a good job.
Always been interesting in making my own adapters/cables but have never tried. Perhaps I should give it a go!
sh500 said:
Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
Click to expand...
Click to collapse
Any news on that extension cable yet; is it available?
i brought one of these and successfully lengthened it with an old peice of printer cable (only multi core cable i had to hand)
i then used an off the shelf diy project box to hide the junction in.
worked very well, but i have since changed to a bluetooth car kit.
the soldering was a little small and working out which wire was which was a bit of a pain, but all in all only took an hour or so to sort out. probably worth it.
(AFAIK my dad is still using the one i adapted.)
sorry to put old post on top !! but own a dimaond and just buy a touch HD !
i a m looking for this kind of cable !!
If someone have info !!
where to buy for exemple ?
thanks in advance !!
how about extending the power cable? seems like that would be easier.
3in1 11 PIN ExtUSB Earphone Handsfree Adapter for HTC
Other option: http://cgi.ebay.com/3in1-11-PIN-Ext...AU_MobilePhoneAccessories&hash=item3cabfd9d0b
Hey guys, i am hoping i missed something really stupid.
But i just bought a few accessories for my TP2.
I bought an extra charger, and an extra USB connection for my Cradle, and an official HTC car charger
All marked as being for the TP2
But they have a standard Mini-USB connection on them, not the wierd little cut off corner connection that is on the underside of my TP2
wht the hell have i forgotten?
is there an adapter i need to buy or summin?
I am thoroughly confused
Thanks for any help
TM411
No they will work fine, for Data and Power transfer normasl mini-usb cables work fine, you only need the EXT-USB connector (the cut off one) for video and sound transfer (headphones etc.)
Excellent,
Thankyou very much
It' s kind of strange, isn't it. But all mini usb connectors will fit.
UPDATE: Posted in wrong thread - re post in accessories section. Not trying to spam. Thank you.
Hey XDA. I recently upgraded my phone to a Motorola Photon 4g.
My problem is this:
The phone has a usb input and micro hdmi input.
I bring my phone with me, almost everywhere; however, because I spent a lot of my time at the gym (24 hr fitness), my battery gets low and I cannot keep the phone on long enough (unless airplane mode) without it dying.
My gym has the Nike + Ipod hookups which are mainly dedicated for charging iphones and ipods and also used for video/audio support.
I was wondering, is there an adapter for a male iphone/ipod to hdmi or micro hdmi which I can use to charge my Photon at the gym (even if I cannot get audio/video? I think I have seen some male pin ipod/ipone pin adapters for regular hdmi, and I figured I could then get a regular hdmi to to micro hdmi adapater to see if that would be an adequate work-around?
I'd love to at the "very least" charge my phone at the gym, but my main concern is compatibility issues and/or if the use of multiple adapters may cause voltage or charge/related issues (e.g.: overheating? or future problems down the line?) A while back, I saw a project for a serial to usb DIY project that may work?: http://www.sparkfun.com/products/8245
Can anyone offer some advice? Last thing I want to do is brick my phone.
Even a bluetooth or wifi male ipod/iphone pinned adaper to my phone might be cool also? Any advice?
Thank you so much.
Joefarar.
http://forum.xda-developers.com/forumdisplay.php?f=1222
You can't charge your phone through the micro HDMI port, only through the micro USB port. Now there is no reason why you can't convert an ipod adapter back to USB but I'm not sure if they make anything like that. You'd probably have to build the cable yourself from multiple parts.
I have a MHL Adapter and I get video just fine. Now I want to be able to sit on my couch while i use the adapter. Seems to me the simplest way would be to use a 15-20 foot Micro USB Male - Micro USB Female extension cable.
Does anyone have any experience with such a setup? Do you have a recommendation for such a cable?
TIA!!
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
I guess the thought was that if I have the Micro USB Extension, then it's one thin lightweight wire that has to travel across the floor.
If I did HDMI, I'd still have to be near power whereas with Micro USB, I could set the power adapter, and HDMI, and MHL Adapter all together and then have a thin and lightweight wire traveling across the floor.
But if it's not possible, (micro USB limitiation??) then HDMI it would have to be.
bean1975 said:
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
Click to expand...
Click to collapse
If the micro USB works it would be much cheaper than a comparable length hdmi cord.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I would test http://www.amazon.com/Extender-over-CAT5E-CAT6-connection/dp/B003L14ZTC this. It's hard to get cheaper than cat5e.
Just bought 10 feet on amazon! Lovely!
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I wanted to do exactly this - extend the cable but at the micro-USB end to avoid having the Micro-usb power supply line and the bulky MHL adaptor all where the phone is - much cleaner to just have a thin cable coming out of the phone and headed towards the TV.
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Micro B USB extension not working
I, too have been trying to figure out why an extension cable doesn't work the way you think it might. Today, I tried cutting my 6 foot cable, first making sure I had the right power leads working. Then I went through all the possible combinations of connections to see if one would work. None do. I'm at a complete loss on this wondering what I should try next.
Thanks for info....similarly baffled but at least you have ruled out something!
Like the other guy said, get your x for of hdmi cable, then just plug your AC charger in where you are. Mhl might use additional connectors/pins/whatever vs micro USB. Or you can go totally wireless and use a Bluetooth mouse and keyboard.
Also I remember I had a charging issue with an extension. Sometimes one product works better than others. I can't charge my phone with my 20 dollar AC charger from best buy since the ICS leak. It's weird. Hdmi cables are pretty uniform, I would just extend that.
Sent from my SAMSUNG-SGH-I717 using XDA
Yes, that works, always has, but that's not the point. Would rather have just one long cable connected to the phone in front of the TV rather than three cables, the device and the phone in a kludge setup.
A partial answer
This allows connecting 6 feet away with a thin, flexible single cable..Also cheap, but shipping takes 15 days.
goo.gl/NzCik
Gavdroid said:
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Click to expand...
Click to collapse
I took apart the two cables and the USB has four wires while the MHL cable has ten.
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Micro B USB extension not working
The Micro B USB connector only has 5 connections, so there is no way you can connect 10 from the MHL cable to it, so something else is going on.
pinoutsguide.com/PortableDevices/micro_usb_pinout.shtml
amblix said:
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Click to expand...
Click to collapse
I bought splices and thought about extending the cable. It's possible.
galaxy s3
I did wanted to do the same but the extension cable didn't work. I looked at the connecting points and felt that the micro usb from Mel adaptor is to bit longer than usual so I thought that may be the reason and I shorten it resulting damaging my Mel adaptor itself. Now I am going for allshare cast wireless hub. So everyone please don't try to cut the micro usb pin from your adaptor or u will better decide to for my option to for complete flexibility.
I want to do this EXACT same thing but slightly more extreme:
I want an MHL adapter with 10-25 feet of micro USB cable on the end so I can use it from anywhere in my living room.
Is there any such cable/adapter?
Why do all MHL adapters come with only a 5 inch cable??? It is maddening!
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Teej53214 said:
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Click to expand...
Click to collapse
Get a different MHL adapter. I use an adapter close to the one 7 posts up by hedaleth with my kenwood system in my truck.
Hi all
I have a standard Samsung Galaxy SIII I9300. It is not rooted and I don't see the point in rooting it,as it is quick, reliable and if I'm not fooling around with it all day, the battery can last up to 2 days!!
But there is one thing I'd like to know how to do, if it is possible to do.
I want to be able to play music and alarm sounds through the micro USB port when the USB cable is connected instead of only through the 3.5mm jack.
I am going to be building a dock station with built in speakers. The Micro USB cable will charge the phone and the data wires will go to the speaker.
Will this work?
And if not, how can I make it work?