Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
Can someone help me find a replacement Digitizer?
I bought my phone off of eBay a while back and it had scratches on the screen, now I want a new screen. I thought about getting one from eBay, but someone told me that those were cheaply made and came from China. And that if I tried replacing one myself It could maybe not work correctly or I could get some particles in between the screens.
Is there a place that I can get it repaired?
Also my phone won't charge anymore unless I put it in a certain position...
i got mine from ebay recently. well, i got it for T7373 international version tp2 instead.
what i would advise is, avoid from getting those cheap digitizer. they work sucks with finger. now i only able to use my tp2 with either stylus or fingernail which is seriously terrible.
and i changed it all myself. weirdly is, the digitizer need some glue to glue it to the tp2. a bad experience i had anyway.
sending my set back to my distributor for cleaning up mess soon.
I bought a replacement verizon digitizer last week
https www dot gounlock dot com
Paid $22.00 plus $10 to ship
Hello,
I just bought the vibrant; however, the bezel is slightly cracked. I wanted to replace it, but every dismembering video of the phone I checked removes the motherboard. Is there any way in which I can remove the bezel without messing with the motherboard, screen, or any other components around it?
Also, the battery cover is scratched. I wanted to buy the replacement cover but there is one available for the i9000 not the t959. I read that it will fit, but I just wanted to confirm it.
I apologize if I sound like a noob or posted this in the wrong section. I spent 3 hours searching for an answer, but found nothing. Any help would be greatly appreciated.
Thanks
Please? Any help would be appreciated.
I don't think you really have an option. After looking at some screen repair guides for the Vibrant it appears the bezel has a panel that goes under the soft keys (see attached image). Also, I've never had my phone get damaged so I never have had to tinker with my physical device. What you could do is buy a case that covers the front bezel like the one I use. It's about 5$ and will hide your bezel + protect it. That's all I can suggest, hope this helps...
Also, not sure about the i9000 back cover working on the Vibrant but here is a brand new back cover you can buy for the vibrant for about 6$.
The only way to replace the bezel is to remove the motherboard. Also, I use i9000 covers for my vibrant. They work beautifully. (I have a chrome one one! ^.^)
Sent from my T959 using XDA App
Thanks for the help guys. All the electronics I have don't have a single scratch on them, literally, I baby them. I bought this from craigslist; however, I didn't see the scratch during that time. I am very irritated atm.................regardless, thanks for the help.
I was wondering, If I buy a bezel, would somebody be willing to replace it for me? Obviously, I will pay you for the job. If yes, I would greatly appreciate that. Please send me a private message if interested.
Hey, I'm trying to help out my sister's boyfriend. He recently bought the Radar and the screen got cracked when it was dropped. They bought a replacement screen off ebay but they can't find instructions to replace it. I've tried to help them. I found nothing on google or on here. I've found videos and such for other HTC phones but not this one. I'm thinking either it may be too hard to replace on your own or maybe its just such a new phone that nobody has posted anything yet. If anyone can help her out i would really appreciate it.
I'm not sure if you would be able to replace it to be honest. Since it has a unibody design. If he just bought it from t-mobile he should be able to get it replaced.
If not he will need a set of torx screw drivers, a prying tool, tweezers, and a lot of time. I suggest recording the entire session so you know what screws go back where.
A friend of mine has an ATT Titan (phone says PI39100) with a cracked front glass. I was looking to purchase a new front lens/digitizer for her phone and do the replacement. Most of what I find online are for the x310e.
Long question short: is the front lens for the x310e the same exact one as for the PI39100? or are the two not compatible?
Also, if someone can point to a DIY for doing this I'd appreciate it - otherwise, i'll take on it the same as the Galaxy Tab 10.1 I did earlier this week (using a hair dryer and an exacto knife) I would like to at least know the lens is the same so I can order soon.
Thanks in advance.
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
malvo26 said:
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
Click to expand...
Click to collapse
Excellent. This is EXACTLY what I was looking for. Thank you VERY much for your assistance
Oh, and it's the glass cover that's broken, because she's still able to (and currently continues to) use the phone. On ebay, I've seen the glass and digitizer going for under $30 shipped, so I think it's reasonable enough.
Thanks again. :good:
Glad to help. That's we are all here for: help each other.