For one week i try to upgrade my atom exce to wm6.5 from my pc i have windows 7 but cant every time i got an erreor i never update thies phone befor any one can help me
same here....i can't either
found these in forum though
"before this, im also had the same problem to flash my o2. exactly, u need window xp platform (sp1,2,3).. i already try on vista and seven but the result....."
have you tried running it in XP Mode? i'm not sure if that works though. I usually flash mine with Windows 7 running XP in VMWare, works every time!
Related
Hi,
Just wanted to know if wm6 upgrading works fine on vista and sync centre? I've been upgrading on xp, but just wanted to know about vista as well..
Thanks,
James.
i think no you must do it with xp
I did a success upgrade to WM6 on my Prophet with Windows Vista with Sync Center a couple of days ago.
Vista is supported for upgrade in the official rom .
The first time I did an upgrade to a PDAViet rom it was successful in vista. I tried on vista 32
On Vista x32 it's possible with some focus but on vista x64 forget. I'm use vista x64 and when I wont install new wm6 i am going on windows XP!
under vista 32bit it is possible, but not under vista 64bit. afaik some of the flash tools are 16bit applications and these don't work on a 64bit OS.
I have vista ultimate build 6000 32bit i tried the vista upgrade guide on this site but still my RUU crashes..................
something which can help but with without any warranty:
install vmware and set up a virtual windows xp machine on your vista system.
the newest vmware allows to intercept all new plugged-in usb devices to let them appear within the vmware.
with this i could connect my prophet to activesync within that VM.
but it always aborted the flash procedure at 80%
Fady said:
I have vista ultimate build 6000 32bit i tried the vista upgrade guide on this site but still my RUU crashes..................
Click to expand...
Click to collapse
I cann't explain, but some ROM do and others don't. For instance a have a NVID RUU that works well, but the famous Step 1 files from PDAViet an Mobis don't work at all.
it never worked with me, am using Vista Ultimate 32 bit and there is something mentioned on www.mahmood1.com about having to change a driver and restart a service, but no luck at all....i also tried VMware and i could only use step1 but Step2 did not even start!!
adamsuail said:
it never worked with me, am using Vista Ultimate 32 bit and there is something mentioned on www.mahmood1.com about having to change a driver and restart a service, but no luck at all....i also tried VMware and i could only use step1 but Step2 did not even start!!
Click to expand...
Click to collapse
In my experience, Step 2 is no problem under Vista, but I can't get step 1 done. Not even with the drivertrick. An other NVID Ruu worked though.
I have no experience or knowledge of VMware you mentioned... what (and where) is that?
I have Vista ULTIMATE X64. I cant do nothing... Looks like stuff working only on XP.
Fantazmas said:
I have Vista ULTIMATE X64. I cant do nothing... Looks like stuff working only on XP.
Click to expand...
Click to collapse
At least the beer is right....
Icant get to work the RUU on VIsta
Icant get to work the RUU on VIsta. It gives error 260. unable to connect onece the bootscreen appears. Any way around?
jugulator said:
Icant get to work the RUU on VIsta. It gives error 260. unable to connect onece the bootscreen appears. Any way around?
Click to expand...
Click to collapse
not that I know off, would be a breakthrough. I figured out (just by trying) that the RUU is not the problem itself, its the nb file that isn't always compatible. If I find more solid an workable information/solution ofcourse I let it know.
Please HELP...
You should be fine to upgrade. I've upgraded my Hermes on Vista and it went perfectly fine (unless it's different for the Atom which i doubt it would be). Just connect the device to your computer, have your device parteredup with the computer, and run the RUU.
Use a virtual machine software and install XP on it.
I don´t use vista but many persons stated that it isn´t working on it right now, but guess it depends on what software or rom for the upgrade.
cheers
http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66
I bricked my 6828 on vista
Tolay said:
I bricked my 6828 on vista
Click to expand...
Click to collapse
I don't see how, as the main problem with flashing a device (the Atom/HP6800 anyway) is that it can't properly communicate with the PDA due to a driver issue. I've tried a Vista driver listed on this forum somewhere, but didn't really help the problem too much.. Your best bet would be to grab Virtual PC and setup an XP install under it.
On Vista & WinXP same error: Download target not found! after a few minutes.
My device: O2 Xda Atom.
OS: Vista and WinXP
Hello @ all. I'm new here and my English is not that good that it should be, so please excuse my mistakes.
I have got a problem I want to install a new ROM on my PDA Phone (XDA Wiza200 G4). I started with this HardSPL. The winwo popped up i pressed "Check DOC", than i got an white screen on my Phone. After this the Tutorial is starting, when I agree to all the questions, the prog should install this SoftSPL, right? But then i am always getting an ERROR, Vista says that this prog is not working normal, and vista is searching for an solution. At the end Vista is closing the Prog and all the Installation is ****.
I am hoping you can understand my Problem and give me an solutuon. Thanks
WinXP is highly recommended,Vista still has problems.You better try it on WinXP.HardSPL will only get installed on WinXP.
Now I've got a problem. Is there any other solution?
Use microsoft "Virtual PC" and install XP ??
Dual boot and install XP?
Sorry posted this in the wrong topic
right click on the ruuupdate.exe file and click properties then click on the compatability tab and click run this program in compatability mode for xp sp2 and make sure the run as administrator tab is ticked too.
Works great for me and i have vista ultimate sp1 and i have had no problem installing roms. I would also enter bootloader mode manually before flashing, i do because certain roms come back with a 260 connection error
hi everyone i'm new to flashing and all.
I am trying to flash my atom exec to wm6, but whenever DSUU starts and the exec goes into update utility, wmdc disconnects from the device and i soon get a 'download target not found' error. Help!
I am using Windows Vista 32bit
well i have the same problem...can anyone help
Same
Same issue here, have to reboot my phone in order to get Windows to see it again.
Any suggestions?
Edit: I'm going to test with an XP Virtual machine and see if it makes a difference. This phone is strictly for testing purposes anyway so I don't have anything to lose, doesn't even have a SIM card.
O2 XDA Atom - Running Windows Mobile 5.0
Running Vista or 7?
If you're running Windows 7, download and install Microsoft XP Mode and Virtual PC.
If you are runing Vista or 7 you can also visit VMware's website and downloading the latest version of VMWare Player. Use it to create an XP virtual machine, install Active Sync 4.1 and then upgrade through that.
I'm currently in the process of upgrading my test phone and will let you know the outcome.
Bonez
hi...im a new owner to atom exec and i want to change my ROM but im having troubles with it...whenever i start the update process,after a while it will pop up a message box saying that "no download target found!"...what does this mean???hopefully someone here can guide me through it...
anybody can help me please??thanks...
before this, im also had the same problem to flash my o2. exac, u need window xp platform (sp1,2,3).. i already try on vista and seven but the result is the same like yours.hope that help
noriest said:
before this, im also had the same problem to flash my o2. exac, u need window xp platform (sp1,2,3).. i already try on vista and seven but the result is the same like yours.hope that help
Click to expand...
Click to collapse
Exactly, I noticed another post where the same issue was occurring.
To bypass this I booted up an XP virtual machine, installed ActiveSync 4.1, connected the phone to the VM (virtual machine) and then ran the update from there.
So far so good.
how to upgrade atom exec rom using mini sd card
i was upgraded my rom with active sync, but something "unwanted" happen, my atom screen just showing windows screen, but it won't opened the menu. please...tell me how to install a new one with mini sd card step by step