Pure or Diamond2 -AT&T Boot Screen .nbh File - Touch Diamond2, Pure ROM Development

Hola,
Was wondering if anyone or a chef could post a ATT_SPLASH.nbh file so I can get a stock boot screen vs the HTC boot screen that is part of the ROM I flashed?
I do have this ATT_SPLASH.nbh form my old Fuze, but trying to flash it does not work. I ran the AT&T ROMUpdateUtility.exe and also the TopazRUUWrapper.exe file using the AT&T_SPLASH.nbh, but my Pure phone gets stuck at the HardSPL screen and just sits and sits.
Thanks in advance...
m0

This is what worked for me. Rename the extracted "RUU_signed.nbh" to "topaimg.nbh" and try flashing using the storage card method by copying the renamed "topaimg.nbh" to the root of your storage card and performing a reset while holding volume down. It'll give you a wrong code error during the first run, but it'll automatically reset and complete it the second time around, and you'll have your stock boot splash screen.

Related

Recover from bad flash

I've tried a search but couldn't find anything that'd help me so...
I've just flashed my phone and it completed fine, rebooted and stuck on the first splash screen. Tried a soft reset and it stuck on the Windows Mobile splash screen, 5 mins later it's still there...
I've got HardSPL7 installed, so how can I flash the previous Rom I was using back onto the phone?
Ta
Off to have another search while I wait
Copy your chosen ROMs .nbh file to the root of your SD card and rename it to hermimg.nbh. Reset device in to bootloader and it should detect the hermimg.nbh and instruct you to press ther Power buton to update. Sometimes you need to go into bootloader a few times before it picks it up.
See WIKI here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
It is a good thing you have HardSPL v7 installed.
When this happened to me a while back, the best way to recover for me was to extract and copy the OS's .NBH file to the root of my SD card (formatted as FAT32) and naming it HERMIMG.NBH.
If you go into the boot screen (Pwr + OK + SR), you will get a prompt to start flashing the image. After the flash, my device was OK.
I am now using this method every time I flash my OS.
EDIT: Seems Maaron beat me to it.
Thanks guys, now re-flashing to my previous rom.
Was surprisingly easy
Yeah it was lucky I've got HardSPL, glad I put it on
Again ta for the hlep
I first used the SD method to fix a bad flash but now I use it evey time. It seems to flash much quicker this way and it doesn't matter what OS you have on your PC, whether you have incompatible USB controller, version of Activesync etc etc...
Had to do the radio the same way as it still wouldn't boot, but now back in action.
Ta
Good thread w/ information. I too am glad that I flashed HardSPL on my device as well
Out of interest, does the SD card have to be blank except for the image? Or can I just bung the .nbh on there and flash with loads of other stuff on the card?
Ta
The WIKI mentions to copy the nbh file on to a blank SD card but I have found it to work on my card containing numerous files and folders as long as it is in the root of the card.
I have tried that wicki (I was using schnaps and it has for some reason failed on booting after 2 weeks working fine...)
When i press the ok, power and reset buttons it takes me to a screen with red/green/blue/white bars (4 of them) showing
HERM100
IPL-1.04
HERM100
SPL-1.40.Olipro
I have done a flash of the SPL to http://www.mrvanx.org/cms/index.php...ask=view&id=38&Itemid=26&limit=1&limitstart=2
I did this and it said it was successful 2 weeks ago!
What can I do? Help!!!
EDIT: Did a hard reset by pushing the button above the start button, button above the ok button and hitting the reset with the stylus. This seems to have fixed the issue, but what worries me is that apparently hardspl v7 is not on there! :|

Frozen Startup Screen

I attempted to use SSK 2.6 R4R Gen.Y Edition Default Kitchen from
HTML:
http://www.sskusers.net/
on my phone earlier. It seemed like everything was going fine, until I was taken to the startup screen. It was frozen, and there was red writing at the bottom of the screen.
Because the phone is stuck on that screen, when I try to connect to ActiveSync, it doesn't recognize any USB devices.
I did try removing the battery. The phone turns off, obviously, but when I turn it back on, I'm back at the frozen startup screen again.
I have also tried doing a soft reset, and the hard reset. When I do a hard reset, it takes me to the bootloader screen, and lets me do everything, but when it reboots, I just end up in the same place I was before - with a frozen startup screen.
Any suggestions on what to do, and/or what could have caused it?
Just wanted to add:
I have Verizon, and did do the hard spl using Raphael_VZW_HSPL_035, which I got from
HTML:
www.ppcgeeks.com
Reflash a different ROM through usb from the bootloader.
dwizzy130
i would suggest flashing a new rom or maybe going back to stock first & then trying a new rom. i would say the most important part right now would be flashing from the bootloader. put the nbh file on the sd card using a media reader & then pop it back in the phone & flash it. thats the easiest way & wouldn't take but 10 minutes to accomplish. i wouldn't be too worried you should be fine. feel free to get at me privately if you need some help.
Help
If you installed Hspl then just hold volume down and power and press the soft reset key. it will reboot into the bootloader and will recognize via usb. Hope this helps. I had a endless loop when i tried flashing to energyrom and this got me back to mightyrom. u may want to try it http://www.mightyrom.com

[Q] Htc HD2 NOT WORKING:Screen stuck on"loading..Please wait"

I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
try a hard reset. turn the phone off, hold down both volume buttons, and turn the phone on, keeping the vol buttons held down. then when prompted,press vol up to reset it.
yes, you'll lose any data and modifications on your phone, it will be back to how it was right after you flashed it, but at least it will start up. better than how it is now, right?
nishankyadav said:
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
Click to expand...
Click to collapse
What an utterly unfortunate situation!! Couple of questions/remarks:
1. Did you install HTC 3.14 ROM with your S/N from HTC's website before flashing Artemis?
2. You already removed HSPL, so I would advice to extract the 3.14 RUU file to your desktop and copy the custom.nbh file to your SD Card after having it renamed to leoimg.nbh (insert SD CArd into PC to do that).
3. Reinsert SD card in device and enter bootlader mode and the installation of 3.14 should start automatically.
4. After that download Artemis 43 and extract it to the folder where you're SSPL_RUU,exe resides. Bothe the custom.nbh and the SSPL file must be in the same folder!
6. Start SSPL_RUU and flash Artemis
7. After that first a hard reset and then a soft reset.
Also read page 1 - Flashing notes
This should to it for you,
regards, Kuzibri
P.S. I posted this also in Artemis thread
same problem
i've got the same problem, but i didn't install the rom artemis,
i restart the installation many time but i've got always the same problem
the display showing loading..... please wait with the chucky logo.
someone can help me???????
thank you

radio issues: Help please

Having trouble with the Radio for GB... i cannot get the phone past the HTC quietly brilliant, I have tried taking the battery out and then restarting but when I boot into recovery it tries to update the radio and then restarts to the quietly brilliant screen
To make it stop trying to flash in the bootloader you need to take the sd card out of the phone and use a card reader on a PC to delete or rename the PG05IMG.zip that is on the sd card. I dont know about the phone not booting. But once you remove that file you can select recovery in bootloader to get to CWR.
Sent from my HTC Thunderbolt
Don't forget most of the GB roms tell you to flash the rom first then the radio.
Flash rom
Don't boot into it. Adb reboot or batt pull
Hboot radio
Reboot normally
use adb to boot into recovery
adb reboot recovery
help
ok this might be a noob question by i am trying to update my radio and i went into my sd card delated the old one and tryed to install the new one idk if any thing happend tell me if i did someting wrong and what i can do to fix it
com.android.phone force close on Das Bamf 2.0.5
I am having a problem with com.android.phone force closing and then taking a while to turn back on while using Das Bamf 2.0.5. only to fc again.
I have installed the GB radios (not using CWR or ROM Manager) only hboot, checked the MD5 on both files, all good there. factory reseted my device countless times which it then works for a little bit until the fc starts again.
Anyone else experiencing this issue?
This was also happening on 2.0.4.01
newell23 said:
Having trouble with the Radio for GB... i cannot get the phone past the HTC quietly brilliant, I have tried taking the battery out and then restarting but when I boot into recovery it tries to update the radio and then restarts to the quietly brilliant screen
Click to expand...
Click to collapse
Just like JBO1018 mentioned take the sd card out and then you should be able to get to recovery by holding down the volume - button and power and then selcet recovery with the volume key and select using the power button. From there you should be able to do a factory reset which should fix your issue of not booting.
Also, if you have another way to connect your sd card to your PC rename or delete the PG05IMG file.

[Q] HTC Flyer will not boot up

Hiya everyone
okay, so i had my flyer on honeycomb, no problem booted up fine.
Then i unlocked the boot loader and rooted it.... once again had no problems booting up and operating.
So then i decideed to put dexters jellybean cfw on my flyer.
I downloaded the ROM and put it on my sd-card, went into recovery with rom manager, did a factory reset, cleared the cache and then went ahead and installed the rom from sc card.
It guided me through the installation, installed and it said it was complete; i went ahead and rebooted.....the htc logo appeared for a few seconds like it normally does (doesn't say quietly brilliant) and then the screen goes black although the back-light is on (no boot animation, like it said on dexters forum) but it doesnt do anything else.... it stays on the black screen, i left if for 2 hours and still nothing; stayed on the black, backlit screen???
so i re-installed it wiping all data etc etc.
and still nothing.
So i would like to put it back to honeycomb (baring in mind i cant actually get onto the device)
can anyone tell me how to do so?
any help would be appreciated
Cheers
Bradley
Since you are bootloader unlocked with S-On, you need to flash the boot.img (kernel) separately in fastboot.
- With the ROM zip file on your PC, open the zip (with WinZip or similar). You will see a file in the parent directory named "boot.img" (no quotes). Extract this file.
- Put the boot.img file into the same folder as fastboot.exe (which you should already have if you unlocked the bootloader).
- Connect the Flyer to your PC using USB. Reboot Flyer into bootloader, than select "fastboot" on the Flyer.
- Open cmd prompt on your PC, change directory to where fastboot.exe is.
- Enter the following command into command prompt:
fastboot flash boot boot.img
- Let the boot.img flash finish. Reboot the phone, and you should be good to go.
You'll have to do this when flashing any custom ROM.
Sorry for an extremely late reply, but thank you so much, it worked
coolbluelights said:
Hiya everyone
okay, so i had my flyer on honeycomb, no problem booted up fine.
Then i unlocked the boot loader and rooted it.... once again had no problems booting up and operating.
So then i decideed to put dexters jellybean cfw on my flyer.
I downloaded the ROM and put it on my sd-card, went into recovery with rom manager, did a factory reset, cleared the cache and then went ahead and installed the rom from sc card.
It guided me through the installation, installed and it said it was complete; i went ahead and rebooted.....the htc logo appeared for a few seconds like it normally does (doesn't say quietly brilliant) and then the screen goes black although the back-light is on (no boot animation, like it said on dexters forum) but it doesnt do anything else.... it stays on the black screen, i left if for 2 hours and still nothing; stayed on the black, backlit screen???
so i re-installed it wiping all data etc etc.
and still nothing.
So i would like to put it back to honeycomb (baring in mind i cant actually get onto the device)
can anyone tell me how to do so?
any help would be appreciated
Cheers
Bradley
Click to expand...
Click to collapse
have same problem with one slightly different I had GB and wont to install HC (Honey Sense - Cool3D Honey v63.63.708) and everything finished complete; then rebooted.....the htc logo appeared for a few seconds like it normally does and then the screen goes black although the back-light is on (no boot animation) and nothing more.... it stays on the black screen???
any help????
You need to flash the boot.img
Sent from my XT890 using xda app-developers app
abayoumi said:
have same problem with one slightly different I had GB and wont to install HC (Honey Sense - Cool3D Honey v63.63.708) and everything finished complete; then rebooted.....the htc logo appeared for a few seconds like it normally does and then the screen goes black although the back-light is on (no boot animation) and nothing more.... it stays on the black screen???
any help????
Click to expand...
Click to collapse
You need to upgrade to the HC hboot first, using this procedure: http://forum.xda-developers.com/showthread.php?t=1358758
GB custom ROMs = need GB hboot
HC, ICS, or JB custom ROMs = need HC hboot.

Categories

Resources