Hi guys,
I´ve even tried to update my NIKI with a wm6.5 rom - but nothing happened - so i used the CID unlocker....everything worked finde - no error messages - then message: the device will be rebooting automatically...
uff...it rebootet, but the screen stays black...nothing is on
i already removed the akku package...the gsm card, the memory card...akku back inside - start button, but nothing happens....
anyone an idea what to do?
when i reconnect the device via usb to my pc, windows sounds a new usb device - but shown as not working...
ahhhhhh, my new device!!!!
can anybody help me please?!?!?
Sam40918 said:
Hi guys,
I0…7ve even tried to update my NIKI with a wm6.5 rom - but nothing happened - so i used the CID unlocker....everything worked finde - no error messages - then message: the device will be rebooting automatically...
uff...it rebootet, but the screen stays black...nothing is on
i already removed the akku package...the gsm card, the memory card...akku back inside - start button, but nothing happens....
anyone an idea what to do?
when i reconnect the device via usb to my pc, windows sounds a new usb device - but shown as not working...
ahhhhhh, my new device!!!!
can anybody help me please?!?!?
Click to expand...
Click to collapse
hi sam
let me assure u nothing wrong has happened to ur device.did u try a hardreset?if not then try it.if u know how to hardreset,u will do it as a flash but if u don't know how to do it let me help u
take out the battery reinsert it don't switch on the phone.charge it,when fully charged take out ur battery,reinsert ur battery.now press the "accept" and "reject" button at the same time and press the power button.now follow the instruction displayed on the screen.
done?
now c ur device going back to normalcy.
hope this helps u
regards
good morning )
I would really like to try a hard-reset...but the device is like death - the akkupackage is fully loaded...
when i connect the device with power, nothing happens - even the led isnt lighting!
just if i pick off the akku und connect the device without akku to the power, then a red led is there lighting constantly.
the device has no reaction to the power button...
yesterday i used the hardspl:
forum.xda-developers.com/showthread.php?t=649003
after the reboot message, my device was dead.
i found no way - and i have searched all night long - to wake it up (
Isnt there any "magic finger trick" with some buttons to awake it? :O)
i wrote to htc support...telling that the phone just when off....hope they will change it on warranty....its 2 weeks old (
Related
i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
hi my friend my device is not respond i try to upgrade it but it is now black screen and i want to reflash it like any device
and i want to know how i can do that
please any one know
my device is
imate pocket pc phone
win se 1.72
and i want to know how i repaire it but you must know that i try to put in the crtadel but and reinstall but this is screen is appear to me
start aggain
what did you put in your rom?
first check everything
is the roms you try to update for your device?
it was power loss?
can you get it to bootloader if you can it will be back from the dead
check roms for country id errors
if you get it to bootloader and you dont get it to connect to you pc try another pc
ok thats it for now
my friend when i connected the power my device is not work how?! because when i put the battery in the device it gives me that no power in the device ,then i changed the battery but the problem still appear when i put the device in the cradel the red light becomes work but this happend when i put it without battery now when i put the battery the device turn off the red light and not give me any thing now i want to give the device power
how can i do that and how can i fix the screen that tell me that the device is not in the cradel this screen is apper for me my frindes
and when i press that buttons nothig happen i don't know waht but now i want to give the device the power how can i do that do you have any answer about that
hi my friends what can i do
hi where are you my friend what can i do
plesae why noboady replay for me
oh where are you
Did you try a hard reset? Please detail what happened exactly, from the beginning.
the first when i put the baterry in the i-mate pockt pc phone the red light is became off i don't know why if someone know the reason he can help me and i want to get the bootloader that is appear in the middel of the screen it called usb or serial because the screen is black i don't know waht i want to became on and i see the serial so can you help me my friend please
if you know how can i get the bootloader you will help me and how i turn on the screen my friend because it is became off and this is the reason
i hope you understand me because when i upgrade the device still work but when the extended rom is installed in the device i see (erasing the rom ) and after erasing the rom i have lose the power so the extended rom now is empty and the usb didn't read any thing by active syn and any other application so can you help me and i try to re-upgrade the processe is failing so i want to know ho can i turn on my device again
Hi all,
I hope anyone can help me on this. I downloaded the
new firmware from the UK T-Mobile site for a SDA-II phone and
installed it. During the install my wonderful XP system stopped
showing off a BSOD... (blue screen of death)
So the upload to the phone was interrupted. If I try now to switch on the phone nothing happens.
Problem is I also used the sw to remove the simlock already, so I suppose I cannot go back to t-mobile for a repair.
Is there any way to get the firmware back into the phone correctly ?
I know there should be a way using an In System Programmer, ISP
Has anyone experience with this problem ?
this has been experienced many times, with many posts on it.
Try getting the device into bootloader mode (not sure of the key combination for the hurricane) and you should be able to reflash it through windows.
I have the same problem and don't know how to backup my previous ROM, did any one experience about that, please tell us.
Th eeasiest method is:
- Disable the USB-Connection in the settings of desktop AS
- press and hold the camera-button
- connect the SDA II with the USB-cable
- after a view seconds appears a three-coloured display, you're now in the bootloader
- you can now stopp pressing the camera-button 8)
If you cann access the bootloader, your phone isn't allready death! You can flash an image from the MiniSD!
Hi All,
I have an SDA II which suffered a failed ROM update as described above. Unfortunately I am unable to get the bootloader screen to display using the technique described above.
Has anybody got advice as to where I can get the phones software reloaded and everything back up and running again.
PS I have made extensive unsuccessful use of the search feature before posting.
Any help very much appreciated.
BR
Andy
how
animelover said:
Th eeasiest method is:
- Disable the USB-Connection in the settings of desktop AS
- press and hold the camera-button
- connect the SDA II with the USB-cable
- after a view seconds appears a three-coloured display, you're now in the bootloader
- you can now stopp pressing the camera-button 8)
If you cann access the bootloader, your phone isn't allready death! You can flash an image from the MiniSD!
Click to expand...
Click to collapse
I got the same problem, tried to upgrade it to a german rom then it crashed, i cannot access the bootloader mode, and u talked about flashing from the minisd, if u could provide more explaination it would helpful
Hi everybody,
i've got a big problem with my s200 G4.
when i flash it ti wm6, it work about 1 day, and after it freeze.
since, i can't turn on it. When i plug the power supply, no LED :/
I try the battery on an other S200 (i've got 3 ) and the battery is ok.
Anyone got the diagram of the motherboard ?
Other idea ?
Hello
I have the same problem
Do you found the solution ?
lot of people have the same problem
Hi,
After open my S200, i think this is a capa out :/
Lot of people after upgrading the s200 have got the same problem. Freeze , reboot..freeze ....and never work again
Have you got a red led ? orange ?
charging ok ?
i had the same probleme
the solution is to remove the battery for 24 hour after plug it in the usb with ur computer until the charger leed appear
after change the rom to a wm5 rom and it will work perfectly.
i think the reason of this probleme is the ipl version must be 2.20 beafore upgrade to wm6
tried and failed :/
Hi,
I test your technic, but doesn't work. Now, when i plug the charger, i've got the red led 1 second, and ....nothing. it doesn't won't to switch on
i try the trick with the pins...but doesn't work
tried and failed :/
Hi,
I test your technic, but doesn't work. Now, when i plug the charger, i've got the red led 1 second, and ....nothing. it doesn't won't to switch on
i try the trick with the pins...but doesn't work
Hi,
Same problem, when I put the charger in I got one sec red led. But I can hard reset or enter bootloader, when on the charger, but there is no way to put USB when the charger is in. Which pins are + and - battery?
If any Prophet can enter bootloader, it can be recovered. See the wiki for a how to.
prophet with white screen and red led
hi everybody.
After trying again and again the pin trick, the s200 went to a blank screen, white with the red led.
I wish it reboot again...
if you got any idea to enter bootloader when i've got white screen ....
Can it enter bootloader? Hold down the camera button and soft reset.
the same problem
i have G4 with ipl and spl 2.20 and on switching on it freeses with white screen. it goes to bootloader, but except WWE ship 220 update others can't be loaded.
Sometimes it goes to screen "Windows mobile", but then freeses.
Is any solutions? Thanks
Jahn11 said:
i have G4 with ipl and spl 2.20 and on switching on it freeses with white screen. it goes to bootloader, but except WWE ship 220 update others can't be loaded.
Sometimes it goes to screen "Windows mobile", but then freeses.
Is any solutions? Thanks
Click to expand...
Click to collapse
Can you perform a hard reset?
no bootloader..just white screen
l3v5y said:
Can it enter bootloader? Hold down the camera button and soft reset.
Click to expand...
Click to collapse
I can't access to bootloader. :/
nyco said:
I can't access to bootloader. :/
Click to expand...
Click to collapse
Can you do a hard reset?
Yes i try again and again...but ...
white screen ( flashing )and red led :/
snif snif
Try to enter bootloader (soft reset and camera button), it doesn't matter if it shows nothing, disable activesync connect through USB, and try to flash a WM5 ROM.
Ok, i'm trying it this evening...
But when i plug the s200 on my PC, nothing show the phone is connected (USB mode on winXP or on the tel )
Well...i tell if your tips work tomorrow =)
The point of this technique is to reduce the number of points it could fail, and remove the requirement for the previous ROM to work. The RUU for shipped ROMs can establish a connection without activesync.
Well ...
But i forget to say ...the s200 can't power on when it's plug on USB...it power only with the charger
With USB, no LED, no screen ....
Have you got a tips to connect the phone with charger+USB cable ?
Hi,
I have an Xperia X10 with Cyagenmod 6 (gingerbread 2.3.3) but it's broken. It won't boot any more. Some days ago it just went out, and it won't start up again. The phone behaves as if it freezes the moment android should load. Like if your computer would freeze in bios, unable to load your operating system.
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
I am kind of a noob with these things and therefore hope one of you guys could help me out. I'm not really looking foreward te buying a new phone already
Thanks!
Freekh
kinda same problem..
i'm removing battery, put back and after holding power the phone shows green led for short time and vibrates for a sec and that's.
add:
i've flashed it before the problem occurs.. flashed, phone booted up, everything normal.. put on usb for charging, changed language and time when it suddenly freezed
This is what happened to mine what country u in
sent with a geordie kiss using wb 2.3.3
what do you mean with "country"?
freekh said:
Hi,
I have an Xperia X10 with Cyagenmod 6 (gingerbread 2.3.3) but it's broken. It won't boot any more. Some days ago it just went out, and it won't start up again. The phone behaves as if it freezes the moment android should load. Like if your computer would freeze in bios, unable to load your operating system.
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
I am kind of a noob with these things and therefore hope one of you guys could help me out. I'm not really looking foreward te buying a new phone already
Thanks!
Freekh
Click to expand...
Click to collapse
Try re-flashing the stock rom using flashtool. That solves Every problem for me ^^
freekh said:
Hi,
...
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
...
Click to expand...
Click to collapse
not able to flash anything
blmn1337 said:
not able to flash anything
Click to expand...
Click to collapse
Why exactly are u unable to flash anything? Are you following the proper procedure?
Here's a guide fro using flashtool http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
fawadmir said:
Why exactly are u unable to flash anything? Are you following the proper procedure?
Here's a guide fro using flashtool http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Click to expand...
Click to collapse
i've posted some logs in other thread
http://forum.xda-developers.com/showthread.php?t=1190540&page=2
umm.. Do u move your mobile when the flashing process is going on? The xperia USB slot is pretty sensitive. Moving the phone can cause it to lose connection and abort the flashing process
28/048/2011 21:48:10 - ERROR - Error flashing. Aborted
i always receive this error if i move my phone.
Notice if you hear the USB device unplug sound from your PC before this error occurs.
^^
fawadmir said:
umm.. Do u move your mobile when the flashing process is going on? The xperia USB slot is pretty sensitive. Moving the phone can cause it to lose connection and abort the flashing process
28/048/2011 21:48:10 - ERROR - Error flashing. Aborted
i always receive this error if i move my phone.
Notice if you hear the USB device unplug sound from your PC before this error occurs.
^^
Click to expand...
Click to collapse
it doesnt seem to be a connection-problem (no usb unplug sounds).
it seems that the phone is in a state, where bootup is not possible
But the phone is not required to boot during flashing. Did you try changing the USB slot on your PC? The one you're connecting your phone to? Try another slot. Sometimes that works too.
fawadmir said:
But the phone is not required to boot during flashing. Did you try changing the USB slot on your PC? The one you're connecting your phone to? Try another slot. Sometimes that works too.
Click to expand...
Click to collapse
same result. can't flash
Me too. Can't flash with Flashtool (latest version), even without moving my phone. It starts flashing, but the progress bar shows of no progress. After a while it just says Error - Abort Flashing. I tried all of my USB port, but nothing changes.
after doing and trying my battery got completely drained (red led blinking) so i left it on the wallcharger for ~1day..
then at sometime it managed to boot up itself.. i left it for charging till 100%
after that i did a few "wipe battery stats" in xrecovery and now it seems to work stable again..
is it possible that messed up battery stats could cause the problem?
Wow, that would be nice.
A question! Was the little led on while charging? Because when I put my phone in the loader, it turns green (as if the battery is completely empty) and after a while it just goes off (when it would normally turn red). Do you have that to?
Putting my phone in the loader now, and waiting till tomorrow! Hope this helps!
yea, i've noticed this with my phone too..
strange led behavior..try to plug the charger first (green led turns on, cant say whether its charging or doing anything else) and then put in the battery and wait
maybe you're lucky and the phone will boot
and report pls
I didn't work. I've put my phone in the loader for over 24 hours, but nothing happened.
But my phone wasn't completely drained. Perhaps that is a condition to make this work. The only question is, how do I drain my battery when I can't turn on my phone?
i have used an 5watt light bulb ^^
connected on + and - and then waited till light goes out
Wel, I connected a little lamp and waited until it went out. Then when I put my battery in my phone and pressed the ON button nothing happend, not even the green light flashing shortly.
When I put my phone in the loader the LED started flashing red. And that whent on for a while until it stoped, and the LED did nothing. Then I waited over 24 hours, but nothing has happend.
When I put my phone in the loader now, it's just like before, the green light burns a little while, then nothing..
it happened to me again.. freeze and then no boot.
but i think i know whats wrong. for my phone i can say, that the battery is ok and the rom/os aswell.
its hardware problem. something is screwed up inside the phone.
when i press the phone at randomly places and hold it + then pushing on-button it boots up
i will open it tomorrow