Related
I have flashed my O2 Atom with WM5 AKU3.3.3 Final (From Master Jiggs), unfortunately I need to flash back to Original O2 Atom (Xda-Atom-ENG-20060426-MOT0822). I can't do it the DSUU always gives an error.
I also tried with BOOT LOADER method as below, also it gave error
1) Remove SD
2) Remove battery
3) Press Camera button + Reset + Insert battery
4) Connect USB -> Run DSUU
Please anyone can give me the step 1 by 1 how to flash back my O2 ATOM.
THANKSSSSSS
Why no-one reply
I tried to search from here, and try a couple of ways, still can't flash to original rom.
At lease please Master Jiggs could you please give me an idea how to do this?
Thankssss a ton
You can try reverse engineering the upgrade procedure found in the WM5 AKU 3.3 topic. It goes like this, but you'll most probably need the AKU2.2 nb0 file.
(which I currently don't have any idea how to extract from the AKU 2.2 ROM. The AKU 2.2 ROM should be avaliable in the same topic if you need it, but you should already have it I think)
UPGRADE PROCEDURE:
1. Your device battery must be at least 80% charged.
2. Enter into boot loader mode: POWER+DPAD(center)+RESET (simultaneous)
3. Connect device to PC using USB
4. Run the original ROM update (in your case, would be 3.3.3 final)
5. On the Welcome window, click <next>
6. Unzip nb0 file into C:\Windows\Temp Folder (overwrite existing file) - you need the nb0 file from the AKU 2.2 ROM here
7. Proceed upgrading and follow on screen instructions.
PS: I have no absolute garuntee this works. The Atom is one locked down mofo. -.-
Thank you so much Ultimate Chicken
There are questions I am not clear
1)I have the extract .nb0 files from AKU2.2, there are 2 .nb0. Do I need to use this both to replace in C:\Windows\Temp after run the DSSU of AKU3.3?
2) After I executed AKU3.3 and look into C:\Windows\Temp, there is no .nb0 file in there so I don't know whether this is correct that to replace AKU2.2 .nb0 files into C:\Windows\Temp (Because there is no .nb0 file exist to replace)
Please help
Thankssss again
see attached
Q1 has already been answered for you. So...
2) After I executed AKU3.3 and look into C:\Windows\Temp, there is no .nb0 file in there so I don't know whether this is correct that to replace AKU2.2 .nb0 files into C:\Windows\Temp (Because there is no .nb0 file exist to replace)
Click to expand...
Click to collapse
That's why the instructions tell you to click NEXT first at the welcome screen (step 5) before doing anything. If you don't you won't see anything in Windows\Temp.
Thank you both of you for the information.
Quick Chicken :
To confirm because I destroy my Atom
If I tried your solution & if it is not working or end up at some steps.
Can I regain back my Atom by flashing it with WM5 AKU3.3 again?
THNKSSS
Repeat Vvvvv
This should work, because I did end up stuck in what wasn't even a bootloader (black screen with large white text that said "connect a USB cable") and was still able to resuscitate my Atom. As long as you have a bootloader that isn't locked (the Atom's, by default, isn't), and you didn't misflash your bootloader, it's possible to reflash your Atom.
To play it safe, remove your SIM and memory cards before flashing.
You may run into a common problem ExtROM_FORMAT_FAIL. If you do get this, your bootloader should be safe (and you should end up in the Connect A USB Cable screen) - retry the flash from scratch repeatedly and one of the attempts should go through.
PS: I still can't garuntee a thing. Frankly, my experience with the hacked Exec ROM might be a fluke or something. Good luck.
Ultimate Chicken
Thanks a million Time I am flashing my Atom back now. Wait & See the result.
Another question from a newbie like mine. You are talking about flashing the boot loader, it seems to be very serious if I flash wrongly my boot loader. So could you please give me a knowledge or a link on this, so that I am not flashing my bootloader wrongly.
Thanks again.....
The bootloader flash is part of the process. It also (thankfully) is the shortest part of the process. Without a bootloader your device won't run at all, and it can't be recovered short of sending it back for repairs.
I can't remember when it occurs, but should be before the ExtROM flash. Your PDA screen and DSUU should show you the details while the event is in progress.
Good luck. ^_^
hey))) as promised, the Soft-SPL and Hard-SPL
1. Soft SPL - loaded to ram temporarily, erased after reboot, use it to flash HardSPL or tested working roms.
2. Hard SPL - A version which is flashed to rom.
So, what`s this?
1. Based on oxygen spl, but
1. Doesn`t check CID
2. KeyCard security is reset
3. Allows to flash unsigned (custom) nbh files.
http://rapidshare.com/files/65732449/hspl.7z.html
Instructions:
1. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device, hold camera and launch spl.lnk - you`ll see the white screen
2. Connect USB to pc
3. From the flasher folder run ROMUpdateUtility.exe and follow instructions to flash the Hard-SPL if needed. or you can flash *ANY* oxygen rom
4. After flashing Hard-Spl, to avoid reflashing, use
nbhextract ruu_signed.nbh
with any official update.it will dump the nbh. you`ll see some file like 00_OS.nb0 or 04_OS.nb0, any *_OS.nb0
use Htc Rom Tool (can be found on forum) and go to build rom, select OXYGEN, use 1.0.000.0 version, and go to system box, and press "..."
Load your os.nb0 and press build rom. then you can use this nbh to flash os. just replace original nbh file within updater directory.
p.s. sorry, have problems with wm6 - no info when i`ll finish it
Good Jobs :d
THANX SPV3DEV foor tool . WM6 for tis device ?
THANK YOU GREAT JOB. not tested yet. but thanks for the efforts.
how is WM6 comming as you promised?
sp3dev,
Thanks I have CID unlocked my phone.
Please I need to SIM unlock it.
how I can do it?
Please help.
Doesn't work for me.
Hi,
All is OK unless I connect USB...
After run ROMUpdateUtility.exe it shows me error, that phone hasn't connection
with PC.
I use Windows Vista.
quell said:
Hi,
All is OK unless I connect USB...
After run ROMUpdateUtility.exe it shows me error, that phone hasn't connection
with PC.
I use Windows Vista.
Click to expand...
Click to collapse
You passed in boot mode? Long push camera and short power.
No...I didn't pass. Phone has white screen, when I run RomUpdateutility.exe before flashing shows me error.
Have ideo when your WM6 rom will be finish ?
Thx for the tool , great job .
wm6
HI. Please Guide coking rom for Htc S310? Thanx
quell said:
Hi,
All is OK unless I connect USB...
After run ROMUpdateUtility.exe it shows me error, that phone hasn't connection
with PC.
I use Windows Vista.
Click to expand...
Click to collapse
I've this problem too. Running windows vista aswell. Anyone found a solution?
RUU on vista
the solution is here:
http://www.modaco.com/content/Windo...U-on-Vista-It-can-be-done-the-ultimate-guide/
Hello all
my phone is fully unlocked
i soft-spl my orange c100(htc 310) and when i tried to hard-spl it just crashed wile writing the new spl
now i am stuck at tri-color boot screen
Does somebody have orange c100 romania rom?
Thanks
Maybe you will help me...
sp3dev said:
4. After flashing Hard-Spl, to avoid reflashing, use
nbhextract ruu_signed.nbh
with any official update.it will dump the nbh. you`ll see some file like 00_OS.nb0 or 04_OS.nb0, any *_OS.nb0
use Htc Rom Tool (can be found on forum) and go to build rom, select OXYGEN, use 1.0.000.0 version, and go to system box, and press "..."
Load your os.nb0 and press build rom. then you can use this nbh to flash os. just replace original nbh file within updater directory.
[/QUOTE=sp3dev]
Hello!
Maybe you Sir have an official Oxygene ROM image? Maybe you dumped it for yourself before all thos updates? I am extremally looking for it Please let me know if you could send it or upload somewhere.
Best greetings,
RA
Click to expand...
Click to collapse
Hi,
Where do I place hard spl?
When pressing this I first press camera and then open spl.ink ? Or is there another way I should do this?
i am from romania and i have spv c100.
if you could tell me how to back-up my rom i will help you.
hi SP3DEV
in step 1. "Copy spl.nb, spl.lnk and jumpspl.exe to the root of device, hold camera and launch spl.lnk - you`ll see the white screen" how do I do this? I copied the 3 mentioned files to root directory but how do I hold the camera and launch spl.lnk at the same time. Please explain this thoroughly. I just bought an HTC S310 and want to upgrade my toy. Thank you much
charlietruong said:
in step 1. "Copy spl.nb, spl.lnk and jumpspl.exe to the root of device, hold camera and launch spl.lnk - you`ll see the white screen" how do I do this? I copied the 3 mentioned files to root directory but how do I hold the camera and launch spl.lnk at the same time. Please explain this thoroughly. I just bought an HTC S310 and want to upgrade my toy. Thank you much
Click to expand...
Click to collapse
same problem.. any solution?
Cease & Desist!
Hard-SPL is *MY* trademark, I never said you could use it.
PSYCHE!
just kidding, but tell me sp3dev, when you disasm the SPL; are you actually rebasing the file, or just going at it by trial and error... because it shouldn't take more than 5 minutes to hack up a Hard-SPL and SSPL.
Also... really you should only call it Hard-SPL if it prevents itself from being overwritten, otherwise it's just a USPL... not that I particularly mind.
hi,
i need help. after i flashed my atom life o2 germany xda comet, the gms module doesn´t work. the problem i used this version: Xda_Atom_Life_WM6_WWE_RC2140907B2
i found the german rom dump and flashed via minisd.
Systeminfo:
IMEI: not ready
Version:
Radio: not ready
can i used another radio stack?
please can somebody help me?
TIA
NiKoN
Hi again.
You PM'ed me, that you have flashed the Atom Life Rom.
But you've not talked about the missing radio and imei.
You've said, that you can't flash back the german Romdump.
Now you write, that you've done it.
You don't give full informations, and now you are crying for help ?
Without more and complete informations, I think no one can help.
How did you do the update ?
How did you solve to bypass the CID check ?
What's with the missing files you described in your PM ?
Did you flash it ?
There are many missing informations.
sorry. i copied your 2 files on a minisd card.
my problem first,
if the telephone started to the bootloader menue on step 5 Burn mto/bt .... the telephone needed the file i mailed you.
if the minisdcard is connected and you enter the bootloader, it´s started automaticly without needing any files.
did you mean the cid while starting the upgrade process under windows?
if it´s this, i started the firmware .exe and on the second next to upgrade i clicked next and hold the downkey on my keyboard, bypass battery and active sync.
yes i flashed your dump, but it seems there is noch gms up/downgrade in your dump.
i hope o2 germany released a full german firmware so i can reactivatet my telephone radio stack.
TIA
NiKoN
scorpio16v said:
Hi again.
You PM'ed me, that you have flashed the Atom Life Rom.
But you've not talked about the missing radio and imei.
You've said, that you can't flash back the german Romdump.
Now you write, that you've done it.
You don't give full informations, and now you are crying for help ?
Without more and complete informations, I think no one can help.
How did you do the update ?
How did you solve to bypass the CID check ?
What's with the missing files you described in your PM ?
Did you flash it ?
There are many missing informations.
Click to expand...
Click to collapse
Additional info: bootloader checks file version and product version numbers; so, for the xda comet - the 12-byte header should be:
08 00 00 00 30 38 32 34 30 37 34 31 (hex)
ID: 08240741 (decimal)
The following files are responsible for boot up version check:
mxip_oem.dll
mxip_oem.ver
My particular interest is the ID. I have tried flashing my WWE Atom with a CHT ROM in Windows XP DSUU, and I only changed the 12-byte header of the CHT ROM to match my present device ROM. In this case, WWE. The flash finished successfully with all the CHT related files on my device.
jiggs said:
Additional info: bootloader checks file version and product version numbers; so, for the xda comet - the 12-byte header should be:
08 00 00 00 30 38 32 34 30 37 34 31 (hex)
Click to expand...
Click to collapse
Yes, but as I understand, he damaged the device while flashing the Atom Life ROM (No GSM/Imei).
That means, something was wrong while update.
I don't know, if it's possible to restore the Radio and Imei by flashing the complete update again.
If it has success, he can simply flash the Comet ROM by MiniSD.
I think, if he lost Imei and Radio, it won't be possible to fix the problem.
@ nikon110:
Have you ever tried to flash the Atom Life update again ?
Maybe the file is damaged ? Download it again.
I don't know, if it might be possible to flash the radio via MiniSD.
hey... thx for help..
a view answers:
yes i tried to flash again. (nothing changes)
yes i downloaded the file again and the version before. (nothing changes)
after reflash Xda_Atom_Life_WM6_WWE_RC2140907B2
i got an o2 setup where i can choose the connection type (gsm)
but i missed some countries.
in the setup there are only chinese, australian and indian countries to choose.
nothing about the uk or others.
the automatic found nothing and the manager chooses australia and a provider from australia.
i copy vl1d_pda_Ver.mot to the minisd
i tried to flash via bootloader an minisd with point 5 burn MOT/BL via UART.
the the device show: Please insert Mini-SD card to start downloading.
after inserting minisd the device show:
-> Found Mini-SD
->Files check error, cannot download MOT.
now the question:
does anybody know how to create the MOT (it´s the radio stack i think after reading many sites) from a new german xda comet?
i think that´s the way to reactivate the radio stack. i hope so...
i missed my device...
NiKoN
PS: scorpio 16v. thanks for your german dump. but after flashing yours again ít seems that the radio stack isn´t in the dump...
PS: jiggs. i only got the original wwe exe. how can i remove the header?
or is it possible to expand the original wwe exe. i can´t found the temp files if the setup expand the files. any idea?
nikon110 said:
i copy vl1d_pda_Ver.mot to the minisd
Click to expand...
Click to collapse
Where did you get this file ?
There isn't a .mot file in the Atom Life update !
PS: scorpio 16v. thanks for your german dump. but after flashing yours again ít seems that the radio stack isn´t in the dump...
Click to expand...
Click to collapse
No, the dump containes only OS and Extended ROM.
If you only flash OS and/or Extended ROM, this problem would never happen.
i can´t found the temp files if the setup expand the files. any idea?
Click to expand...
Click to collapse
You must start the update. Wait until the updateutility starts. Don't close it !
Go to Windows/Temp folder.Or better open it before, than you can see which files are extracted. Now you can copy all files to your prefered destination.
I think the file "amss.mbn" is the Radio, but I don't know if other files are needed too.
My tipp to you, flash back the german Dump and sent it back for fixing the problem.
And remember, if you ever want to change the ROM, flash only OS and/or Extended ROM via MiniSD.
Than, I believe, you'll never brick your device.
Hello,
I made the same mistake, as I updated the XDA Comet using the DSUU and of course the radio stack seems to be down. It could all be due to SIM-Locking, which enforces the radio part to remain down.
The question would be, whether it will turn out that updating the radio stack to the German one is possible ? Maybe as part of the Atom Life Kitchen research.
Thank you very much.
I decided to give the WWE 150507B2 a try and the situation has changed slightly, though of course it's by no means corrected.
T-Mobile (Germany) sim is recognized and I'm prompted to type my PIN in. After typing the PIN, the answer from the radio stack/WM6 (whoever might be) is: Unknown SIM Error and I'm asked to type my PIN once again.
System Info shows that both IMEI and Radio are "Not Ready".
A Vodafone (Germany) SIM is not even detected. (and yes it works in other handsets and worked before in XDA Comet).
Again, if the German radio stack could be dumped and the inserted in the temporary folder the DSUU uses, it could be an option to restore it. So if anyone could give a try at dumping it, I'd be more than glad to later perform the DSUU replacement test.
Best regards
Hello,
I made the same mistake, as I updated the XDA Comet using the DSUU and of course the radio stack seems to be down.
I find many life in asia , the radio is 2340, but the comet radio is 2350.
I use a updater only for 2340 to update my ppc. But feiled.
My Comet lost radio....
Can anybody help me to solve the problem....
Thank you very much.
There are 2 obvious solutions
1. O2 Germany publishing a DSUU with the original german software. IMHO the CD-Rom that comes with the XDA should have it included, just in case users want to flash back the device to its original state.
2. Someone being able to dump the radio stack from a German Comet. Of course, learning how to flash it back has to be done too.
Until either 1 or 2, I think that the best chance is to flash back German OS + Ext Rom and send it back to O2 for repair. They will obviously flash it back to the original state.
But I would like to avoid wasting a full month in the process of sending it to O2 and getting it back.
Regards
pepelu456 said:
There are 2 obvious solutions
1. O2 Germany publishing a DSUU with the original german software. IMHO the CD-Rom that comes with the XDA should have it included, just in case users want to flash back the device to its original state.
2. Someone being able to dump the radio stack from a German Comet. Of course, learning how to flash it back has to be done too.
Until either 1 or 2, I think that the best chance is to flash back German OS + Ext Rom and send it back to O2 for repair. They will obviously flash it back to the original state.
But I would like to avoid wasting a full month in the process of sending it to O2 and getting it back.
Regards
Click to expand...
Click to collapse
1. Why should O2 offer an Update to restore your device ?
To restore you only need a Hardreset. If you flash an other ROM, it's your problem and not O2's.
2.It's not possible to dump the Radio, sorry.
Many Atom Life user have changed their OS from chinese to english or reverse.
I don't know if they have all the same Radio.
For example, you can't downgrade an HTC Hermes with Radiobootloader 1.08 with an Radio with bootloader <1.08 it allways ends with a corrupt Radio.
Maybe it's the same with the Comet radio.
I think the only solution is the Service Center.
scorpio16v said:
1. Why should O2 offer an Update to restore your device ?
To restore you only need a Hardreset. If you flash an other ROM, it's your problem and not O2's.
Click to expand...
Click to collapse
What if an application destroys the ability to restore the PDA even with a Hard reset? Virus have not striken hard the PDA world but they may do sooner or later and that might be one the undesired effects we may be facing.
Whenever I have bought a laptop, the manufacturer has always given me a recovery CD, either in the form of a full OS CD or a customized recovery CD.
Why should a PDA manufacturer be special and be able to avoid providing me
with a copy of the OS I paid for ? (even if the OS is given to me in such a form that I can only install it in my device)
I am not calling for an update, but the original version of the software that came with my device and I have paid for.
P.D.
It is of course my own fault if I flash the ROM and something goes wrong. Stimmt!
today i got my repaired o2 comet back.
the services changes the pcb. it seems the romupdate killed the hardware.
thx for help scorpio16v 4ur rom dump
NiKoN
ppl help needed here badly... i'm in pakistan and i did MWg Atom Life on my o2 XDA Comet and my IMEI and Radio is missing what do i do... don't have any o2 center here what do i do
Hi guys,
Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
I've searched the forums and found few ways to downgrade back to wm5 but those aren't the same conditions with what im facing. Can someone recommend how can i downgrade back to wm5 with the conditions that im facing? All you help is much appreciated. THank you.
You are lucky , at lease your device now become atom. My was totally cannot on power and just vibrate. Till I have to sent it back to HP SC and change the main board . Can you understand chinese , if yes than I have a solution you may try . Else you have to wait . I just download a program and doing some testing , the program is in chinese language .
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
elus said:
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
Click to expand...
Click to collapse
I don't think you still can claim under warranty unless you can make your phone total can't on and access to windows mobile. Last time I sent it back they charge me RM 385 to change the main board . I did talk to their technical personal , it seen like they don't know what is bootloader and flash it back to original rom . What they do was just change the main board with preloaded program .
Good luck
If you think that you can claim you warranty , than you just go a head . If not , may be you can access my thread "HP6828 WM6" , download any one of the rom that I post , follow the instruction accept downgrade bootloader . Enter your phone in bootloader mode . If you can start the process , than it will flash a new hp bootloader into your phone .
Against . Good luck
Cheers
I'm from malaysia also.
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
elus said:
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
Click to expand...
Click to collapse
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
nhocbanme said:
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
Click to expand...
Click to collapse
Can share the information how to restore back the HP original bootloader ? And the procedure . Thanks
First you must have HP bootloader file (Eboot.nb0) 1.01 or 1.05 are OK.
- Use DRUU to restore Bootloader : replace ATOM bootloader file with HP bootloader file
- Use miniSD to restore Bootloader : copy Eboot.nb0 to miniSD card, go to bootloader ... wait 1' it will auto hard reset.
After flash successfull remmember remove Eboot.nb0 from miniSD.
- Reflashing Bootloader using JTAG. (Use only when can't use two above menthods)
HP Bootloader 1.01 : http://rapidshare.com/files/82853862/HP_BL1.0.1.rar
HP Bootloader 1.05 : http://rapidshare.com/files/82853924/HP_BL1.0.5.rar
nhocbanme could you please specify which specfic DRUU should be use for your method? Thank you.
You should use DRUU of Chartreux, replace Eboot.nb0 and choose OS and Eboot
Remember copy a HP68xx ROM (diskimage_Ver.nb0) to C:\Windows\Temp with DRUU of Chartreux then start...
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
elus said:
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
Click to expand...
Click to collapse
-You must extract RUU in C:\Windows\Temp (no sub folder) then replace Eboot.nb0 with Hp bootloader 1.01/1.05
-Copy a diskimage_Ver.nb0 (any ROM WM6 for HP 68xx) to C:\Windows\Temp
-Run the DRUU program and choose OS and Eboot and start.
Goodluck !!!
It worked! Thx a lot nhocbanme and wantat. The methods restore the atom bootloader to hp bootloader. The DSUU by chartreux is a good tool.
Now, i would like to put this solution up into the wiki. How may i do so? Thank you.
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
williamSun said:
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
Click to expand...
Click to collapse
OK, please read my topic, I'll post a WM5 ROM flash via miniSD
help !!
im facing another problem again...
this time i changed the file extension EBOOT0502_MNT_01.01.03.nbf to EBOOT0502_MNT_01.01.03.nb0
(file from HP official WM5 SP34074, inside the installed folder )
and copy to memory card and put in 6828 then started to go bootloader screen
few minutes later my screen goes blank, and i tried with the revive methods
which is
-press the 2 softkey " - " and reset button
-put in the battery ,
-release reset, then release softkey
but didt work out!!!!no repsponse at all..tried many times..possible dead ad???
plz help me abit ..big troblem!
I dont think i can help u much here as im still new. From the looks of your problem, i guess u forgotten to cut the first 12bits (or something like that) of your bootloader when u use it to flash via mini sd. Maybe you can try the JTAG method mentioned in the atom wiki to restore your bootloader. Good luck.
Thanks guys!
The same exact thing happened to me yesterday..I was already about to sell my ipaq as a dead unit and i came upon this thread and after following the steps it did made ipaq alive again..
thank you very much guys,i hope you continue to help more people..
god bless and best of luck to you
more power xda-dev!
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
cnsathya said:
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
Click to expand...
Click to collapse
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
pof said:
..It can be used in all HTC Hermes devices, no matter which bootloader version the device is running.
NOTE: For x01ht post April devices, see this thread....
Click to expand...
Click to collapse
pof said:
...This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it.
Click to expand...
Click to collapse
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
But you can do it with IMEI Check, you just cannot change radio version afterwards, but on newer version of X01HT it's 1.46 radio, so it's quite ok I think.
mrvanx said:
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
Click to expand...
Click to collapse
So if i upgrade to the latest radio rom,it still can't be solved??
how about if we change the EXtRom?
Success
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
hi... Learning.....
may i ask what ur x01ht was?
is it before april or post april?
I have this message coming up on a Japanese language version X01HT. I don't think it's been unlocked. Will these instructions work on my phone?
EDIT: I followed the instructions above on my phone, and they worked perfect!!! Thanks!
how can I tell if my phone is "post april"?
USIM Message GONE!!!!
Hello cnsathya,
Not sure if you still have the problem. I just got my x01ht Hermes yesterday and I worked on it today to unlock it. I used pof's (THANK YOU SOOOO MUCH) unlocker v3 but still USIM showed then later put my t-mobile sim and re-ran the unlock software but after 10 sec I still got the USIM message. I moved SB_USIM.cab to the phone and ran it before the USIM message came but nothing seemed to change. But I could then use my sim and receive calls so I flashed the PIMPING IS BACK v3 ROM by jasjammin and it now works perfectly and no more USIM. I had an old x01ht but cracked the screen so bought this one. Let me know if you need more information or have questions. Thank You,
Pr4tik
learnig said:
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
Click to expand...
Click to collapse
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Is it ?
http://rapidshare.com/files/17336753/JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
It was listed here http://mobi.pdafans.com/viewthread.php?tid=275408&extra=page=3&filter=type&typeid=178
bayupraya said:
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Click to expand...
Click to collapse
This is a very old thread and I beg your pardon for bumping it, but I am looking for a thread which can help me solve my problem for like 15 hours now and this is the closest answer I got. My issue is similar to this, only mine is X05ht or the Touch Pro device. Similar Softbank carrier and yes similar USIM message issue.
Anyone can help me point to the right direction of solving my issue like the threadmaker solved hers/his on this thread? Please?
HTC xo1ht
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.