after trying to ut the new updated villian onto my phone it wont boot, im using the latest radio version,
it comes up ith quieley brilliant screen but no further been stuck there for over a hour
i believe its something to do with the partition
when i goto my sd card in recovery on the computer it only shows 900mb when it used to be 2gb
im using the latest amon recovery bootloader, please help
same problem here, only thing is mt sd card isnt partitioned
try a wipe and boot without sdcard.
Related
okay so here is the deal... i was running thunderstick my camera stopped working so i decided to restore to synergy. Once i did that through clockwork my phone never actually loaded up.
I hooking my phone up to the computer but cant do that because my phone stuck at htc white screen and dont have no pg1...zip thing on my sd card so when i go into bootloader there is nothing i can do i think.
So how can I get a ruu on my sd card so i can flash so i can fix my phone. I also tried restoring other roms that I had backed up in the past and still stuck at screen so if there is anyone that can help me i would appreciate. Thanks
If you have a usb to microSD card , you could just load the files directly on the card.
Get into recovery and flash a Rom. An ruu will cause you to lose root.
okay so I will decide to try both ideas. thanks guys
you can flash a rooted ruu here http://dl.dropbox.com/u/29644922/Thunderbolt/Stock Rooted RUU/PG05IMG_stock.zip
now you have root.. i suspect your problem may be the last clockwork recovery 5.0.1.0 everytime i do a restore from it i have the same problem.
Same thing happening to me right now... DAMN IT....
plug in with USB,
at command prompt or from run
run this command
adb reboot bootloader
get in to recovery and mount your USB Storage
copy any RUU you like and reboot to recovery.
I'm pretty sure you can mount the SD-card to your computer in clockwork recovery too.
Sent from my HTC Thunderbolt
Hi! My friend has a 16gb nook tablet and It only boots into cwm recovery. I tried to flash stock 1.4.2 firmware onto it through sd card method, but it it shows an "X" in the upper right hand corner and then shuts down.
Status of the NT: Can boot into recov. but says cant mount or open /cache/recovery/ [....]
can boot by sd card.
can someone help?
he says that he was on CM9 but tried to go to stock but then boot looped it somehow then flashed jandycane then to stock then CM7 then after doing something, it only boots into recovery now....
Any help appreciated!:good:
Tho San Thanh Pho said:
Hi! My friend has a 16gb nook tablet and It only boots into cwm recovery. I tried to flash stock 1.4.2 firmware onto it through sd card method, but it it shows an "X" in the upper right hand corner and then shuts down.
Status of the NT: Can boot into recov. but says cant mount or open /cache/recovery/ [....]
can boot by sd card.
can someone help?
he says that he was on CM9 but tried to go to stock but then boot looped it somehow then flashed jandycane then to stock then CM7 then after doing something, it only boots into recovery now....
Any help appreciated!:good:
Click to expand...
Click to collapse
I'd reflash recovery and see what that does.
Tho San Thanh Pho said:
Hi! My friend has a 16gb nook tablet and It only boots into cwm recovery. I tried to flash stock 1.4.2 firmware onto it through sd card method, but it it shows an "X" in the upper right hand corner and then shuts down.
Status of the NT: Can boot into recov. but says cant mount or open /cache/recovery/ [....]
can boot by sd card.
can someone help?
he says that he was on CM9 but tried to go to stock but then boot looped it somehow then flashed jandycane then to stock then CM7 then after doing something, it only boots into recovery now....
Any help appreciated!:good:
Click to expand...
Click to collapse
worse comes to worst flash adamoutlers total wipe ubuntu flash to revert to 1.4.0 stock
Sent from my Nook Tablet CM7 BETA using xda premium app
ShinnAsuka said:
worse comes to worst flash adamoutlers total wipe ubuntu flash to revert to 1.4.0 stock
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
I will tell my friend this.
[EDIT] He has updated me with some information and boot from sd card as he has tried the usb method and the power+ n home method and he hasn't got the CWM to boot from the sd card, but It does boot the stock firmware restore using the usb method but that doesn't work because of the red "X"...
He also had Cyan boot installed with CM7 but it goes straight to recovery instead of regular booting.
[EDIT2] OK. He told me after a whole day trying to get the Nook to boot off the sd card but he couldn't.... He just wants to know if this Is this a common bug. He also says that He could view the sd card contents in CWM but flashing anything onto internal doesn't work. Any Help Appreciated! :]
[EDIT3] My friend finally gave me his nook to see what was wrong with what he was doing and he didn't do the usb method... I got it booting from sd card now...
First off I want to say that I'm a noob when it comes to rooting and such, so I guess I don't have anything to blame for this problem, but the problem is that my Samsung Galaxy S 4G is stuck in boot loop! I was trying to root and update from gingerbread to jellybean with cm10, but things got really messy! First, I want to get out of this boot loop. I accidentally wiped my sd card in recovery mode and installed a custom kernel over the stock kernel and now its boot looping! My thought is that the sd card has no android system files or boot files to let the system load? I don't know but please help!
Volkronica said:
First off I want to say that I'm a noob when it comes to rooting and such, so I guess I don't have anything to blame for this problem, but the problem is that my Samsung Galaxy S 4G is stuck in boot loop! I was trying to root and update from gingerbread to jellybean with cm10, but things got really messy! First, I want to get out of this boot loop. I accidentally wiped my sd card in recovery mode and installed a custom kernel over the stock kernel and now its boot looping! My thought is that the sd card has no android system files or boot files to let the system load? I don't know but please help!
Click to expand...
Click to collapse
The SD card has nothing to do with the boot process or storing of system files. Simply place a ROM on your SD card, boot into recovery (wipe everything excluding SD) and flash it.
I'm pretty sure I loaded a kernel incorrectly and now all I can get to is the Bootloader and Recovery. I am to the point of just flashing the RUU back to stock but I have never done this and wanted to know if that erased the sd card. I have backups on the sd card but the computer will no longer recognize the phone so I can't get to my backup files.
matt4541 said:
I'm pretty sure I loaded a kernel incorrectly and now all I can get to is the Bootloader and Recovery. I am to the point of just flashing the RUU back to stock but I have never done this and wanted to know if that erased the sd card. I have backups on the sd card but the computer will no longer recognize the phone so I can't get to my backup files.
Click to expand...
Click to collapse
SD should remain safe with stock flash; though it is curious that you can get into boot loader but you can't access the phone via ADB or even Fastboot?
I did an internal flash of 10.1. It works and boots however I forgot it include gaps when I did the flash. Now when I boot to recovery on the universal boot loader it does not recognize the sd and I only have the following options: internal emmc normal, internal emmc recovery and start fastboot. cyan can does acknowledge when I insert and remove the card however I can not read from it when I goto file manager. So reflashing in cyan wont work as far as I know. Card is formatted to fat32.
When I connect nook to computer via usb, it says failed driver installation.
I have tried to boot then put in the sd [didn't work]
I have tried to hook up the usb, to nook and computer to force recovery mode,[didnt work]
I have tried flashing a new rom onto sd and booting [didnt work]
I have tried flashing new rom and using the touchscreen firmware flasher but the os cant see the card when inserted.
Use FAT?
Sent from my Nexus 7 using xda app-developers app
xliquidacidx said:
I did an internal flash of 10.1. It works and boots however I forgot it include gaps when I did the flash. Now when I boot to recovery on the universal boot loader it does not recognize the sd and I only have the following options: internal emmc normal, internal emmc recovery and start fastboot.
...
I have tried flashing a new rom onto sd and booting [didnt work]
I have tried flashing new rom and using the touchscreen firmware flasher but the os cant see the card when inserted.
Click to expand...
Click to collapse
I'd suggest you try burning a pre-made CM SDcard image from http://iamafanof.wordpress.com/2013...id-4-3-for-nook-tablet-imgsdc-boot-09aug2013/.
If it fails to boot your NT's card reader might be faulty.
If it boots successfully, you can proceed to reflash CM using pointers from http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123.
Thanks
Thanks that worked. Thanks so much!!!
Was having the same issue with mine and used this same procedure to fix it so...double thanks.